Used Machining Centers for sale (67,845)

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,286 h, functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 35 m/min, Submitting a bid constitutes an obligation to collect the item on time on 21.04.2026! Within Europe, the disassembly team can also reassemble the system directly at the buyer’s site afterwards (Estimate: approx. 20,000 EUR, approx. 15 working days required). Gijdpfxjyzrvte Acwor 5-axis simultaneous milling with Heidenhain iTNC 530 control! TECHNICAL DETAILS Travel X-axis: 2,800 mm Travel Y-axis: 2,200 mm Travel Z-axis: 800 mm Feed rate: 35,000 mm/min MACHINE DETAILS Control manufacturer: Heidenhain iTNC 530 Tool magazine: 40 stations Electrical Data Supply voltage: 400 V AC Frequency: 50 Hz Current consumption: 116 A Total installed power: 69 kW Operating hours Program run time: 23,286 h Machine on hours: 51,450 h Control on hours: 70,739 h EQUIPMENT Measuring probe Note: Further technical specifications of the machine can be found in the attached data sheet.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 3,275 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, rotational speed (max.): 12,000 rpm, Placing a bid obligates you to collect the item on time on 21.04.2026! Machine with only 3,275 spindle hours! TECHNICAL DETAILS Travel X-axis: 1,100 mm Travel Y-axis: 600 mm Travel Z-axis: 510 mm Table size: 1,300 x 600 mm T-slots: 6 (size 18) Max. table load: 1,000 kg Spindle speed range: 60 - 12,000 rpm Drive power: 10 / 17 kW Spindle taper: ISO 40 / DIN 69871A Magazine: 32 stations MACHINE DETAILS Drive power: 10 / 17 kW Giodpfsyzhnfox Acwor Through-spindle coolant (IKZ): 20 bar Coolant tank volume: 480 l Spindle hours: 3,275 h Total machine operating hours: 15,883 h Control operating hours: 17,706 h

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,447 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, table width: 500 mm, table length: 500 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 560 mm Travel Z-axis: 560 mm Gijdpfx Aoytnf Hocwer Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 24 m/min Table width: 500 mm Table length: 500 mm Table load: 400 kg MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,445 x 3,055 x 2,200 mm Total weight: 7,000 kg Spindle hours: 2,447 h EQUIPMENT Automatic pallet changer 4-axis design incl. B-axis (table rotation)

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, travel distance X-axis: 660 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN TNC 425, spindle speed (max.): 6,000 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item promptly between 04.05.26 and 07.05.26. TECHNICAL DETAILS Travel X-axis: 660 mm Travel Y-axis: 380 mm Travel Z-axis: 380 mm Spindle taper: ISO 40 Spindle speed range: 100 – 6,000 rpm Rapid traverse: 15 m/min Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm Resolution: 0.001 mm Table Giedpjyr I D Tefx Acwsr Table dimensions: 700 x 360 mm Max. table load: 300 kg Distance table to floor: 840 mm Distance table center to column min.: 190 mm Distance table center to column max.: 570 mm Tools Max. diameter with adjacent tools: 85 mm Max. diameter with empty adjacent stations: 135 mm Max. tool length: 250 mm Max. tool weight: 6 kg Max. total tool weight: 60 kg Ball screw Pitch: 32 mm Diameter: 10 mm T-slots Number: 3 Width: 18 mm Spacing: 110 mm MACHINE DETAILS CNC control: HEIDENHAIN TNC 425 Connected load: 13 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 2,000 x 2,450 mm Machine weight: 4,000 kg EQUIPMENT 16-position tool changer Tool holders Measuring probe 4th axis Note: The vise shown in the images is not included in the sale. External reference: Lot 20

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 123426, travel distance X-axis: 1,200 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 2,000 kg, spindle speed (max.): 2,300 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 1,200 mm Travel Y-axis: 1,000 mm Travel Z-axis: 800 mm Giodpfxeyw N Sqe Acwsr Workpiece weight (max.): 2,000 kg Table width: 630 mm Table length: 800 mm Spindle speed: 10 - 2,300 rpm Spindle motor power: 22,000 W Number of spindles: 1 Number of tool magazine slots: 161 MACHINE DETAILS Control: Siemens Sinumerik System 800 - 840C Total weight: 24,000 kg EQUIPMENT Documentation/manual Infinitely variable speed control Chip conveyor

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 1110001, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 800 mm, workpiece weight (max.): 1,500 kg, spindle speed (max.): 3,500 rpm, No minimum price – guaranteed sale to the highest bidder! Further technical details about the machine can be found in the attached machine description. TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 1,000 mm Travel Z-axis: 800 mm Spindle speed: 10 – 3,500 rpm Number of spindles: 1 Rapid traverse X-axis: 25 m/min Rapid traverse Y-axis: 25 m/min Rapid traverse Z-axis: 25 m/min Feed rate X-axis: 25 m/min Feed rate Y-axis: 25 m/min Feed rate Z-axis: 25 m/min Max. workpiece height: 1,250 mm Max. workpiece diameter: 1,230 mm Max. workpiece weight: 1,500 kg Table width: 630 mm Table length: 800 mm Table load: 1,500 kg Number of tool magazine slots: 122 Tool holder diameter: 130 mm Tool length: 630 mm Tool weight: 50 kg MACHINE DETAILS Control: Siemens Sinumerik 840C Coolant supply: 50 bar Dimensions & Weight Dimensions (L x W x H): 9,500 x 8,000 x 4,300 mm Weight: 30,000 kg X, Y, and Z axes Resolution: 0.001 mm Position uncertainty P: 0.010 mm Positional scatter Ps: 0.006 mm B-axis Positioning accuracy (face gear disengaged): 10″ Indirect measuring system B-axis indexing accuracy (via face gear): 6″ Machining accuracy Circular interpolation: 0.015 mm Runout in the taper of the working spindle: 0.006 mm Pallet change accuracy: ± 0.015 mm EQUIPMENT Documentation/manual Infinitely variable speed adjustment Chip conveyor Gsdpfx Aeyw N Irscwoir Note: The door on the right pallet station is jammed.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: KMM526 1506, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller model: FANUC SERIES 18i-MB 5, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you are obligated to collect the item within the specified dates, either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Travel X-axis: 1,000 mm Travel Y-axis: 400 mm Travel Z-axis: 360 mm Table dimensions: 1,500 x 470 mm Overhang: 350 mm Tool holder: SK 40 Spindle speed: 36 to 12,000 rpm Spindle bearing diameter: 65 mm Max. tool diameter: 125 mm Max. tool length: 250 mm Giodpfxoym Nqks Acwsr Feed rate X/Y/Z-axis: 1 - 10,000 mm/min Rapid traverse X/Y/Z-axis: 45 m/min MACHINE DETAILS Control: FANUC SERIES 18i-MB 5 Operating voltage: 400 V Frequency: 50 Hz Nominal current: 45 A Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,700 x 3,300 mm Weight: 6,000 kg EQUIPMENT 4th axis 42-position tool changer Chip conveyor Coolant system Note: The clamping devices shown in the photos are not included. External reference: Elos – Lot 1

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 498-56, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: SIEMENS SINUMERIK 840 D, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 550 mm Travel range Z-axis: 550 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Number of tool stations: 40 Table dimensions: 850 mm x 350 mm MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D Chip conveyor manufacturer: KNOLL Paper band filtration system manufacturer: KNOLL Zero-point clamping system model: SCHUNK SDE 138 Dimensions & Weight Dimensions (L x W x H): 5,500 x 3,700 x 2,900 mm Machine weight: 10,000 kg EQUIPMENT Tool holders and tools on the tool changer Measuring probe Recently fitted new spindle Note: A truck with a width of 3,000 mm is required for transport. Gisdpfsym Anpex Acwor External reference: Lot 11 / Wittner

Condition: not inspected (used), Year of construction: 2000, operating hours: 26,350 h, functionality: unexamined, machine/vehicle number: 71401453, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: MILLPLUS, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Submission of a bid obligates timely collection either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Max. spindle speed: 12,000 rpm X-axis feed rate: 20 – 15,000 mm/min Y-axis feed rate: 20 – 15,000 mm/min Z-axis feed rate: 20 – 15,000 mm/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Linear encoder resolution X-axis: 0.001 mm Linear encoder resolution Y-axis: 0.001 mm Linear encoder resolution Z-axis: 0.001 mm Input increment X-axis: 0.001 mm Input increment Y-axis: 0.001 mm Input increment Z-axis: 0.001 mm Positioning tolerance X-axis: 0.010 mm Positioning tolerance Y-axis: 0.010 mm Positioning tolerance Z-axis: 0.010 mm Tool holder: SK 40 Max. tool diameter: 100 mm Max. tool length from spindle nose without tool breakage control: 350 mm NC rotary table clamping surface: 630 mm diameter T-slot spacing: 63 mm Number of T-slots: 9 Centering bore: 50 mm diameter Max. table rotation speed: 10.7 rpm Table feed rate: 3,600°/min Table encoder resolution: 0.001° MACHINE DETAILS Control: MILLPLUS Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connected load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Weight: 10,000 kg Recorded spindle hours: 26,350 h Gjdsym Aucspfx Acweir EQUIPMENT 60-position automatic tool changer Chip conveyor Coolant system Note: The machine can be transported on a truck with a width of 3,000 mm. External reference: Elos – Lot 6

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller model: Mazatrol Fusion 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 510 mm Travel Y-axis: 510 mm Travel Z-axis: 460 mm Swivel range A-axis: +30° / -120° Rotation range C-axis: +/- 360° Feed rate range (X-/ Y-/ Z-axis): 1 - 50,000 mm/min Rapid traverse (X-/ Y-/ Z-axis): 50 m/min Indexing A and C: 0.001° Swivel time 90° A/C: 1.9 / 1.5 s Main spindle Max. spindle speed: 12,000 rpm Spindle drive power: 22/15 kW Tool holder: ISO 40 Spindle diameter: 80 mm Acceleration time to max. speed: 1.7 s Worktable Clamping surface: 500 x 400 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 80 mm Distance from spindle to table: 190 - 650 mm Max. workpiece size: 500 x 500 x 405 mm Max. table load: 300 kg Tool changer Max. number of tool positions: 40 Max. tool diameter: 80 mm Max. tool diameter with adjacent spaces free: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time: 4.5 s MACHINE DETAILS Gisdpfxoyxmq To Acwjr Control: Mazatrol Fusion 640M Total power requirement: 51 kVA Dimensions & Weight Space requirement: 3.4 x 3.7 x 2.8 m Machine weight: 7.5 t EQUIPMENT Hydraulic unit Coolant system Chip tray Tool measurement Documentation

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: TNC 426 Heidenhain, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel Range X-axis: 1,250 mm Travel Range Y-axis: 880 mm Travel Range Z-axis: 800 mm Gsdpfsyxmmnex Acwsir Main Spindle Max. Speed Range: 12,000 rpm Drive Power: 15 / 10 kW Max. Torque: 500 Nm Tool Holder: SK 40 Work Table Clamping Surface: 1,500 x 1,050 mm Max. Table Load: 2,500 kg Number of T-slots: 10 T-slot Width: 18 H7 mm T-slot Pitch: 100 mm Tool Changer Number of Tool Stations: 30 Max. Tool Diameter: 80 mm Max. Tool Diameter with Empty Adjacent Pocket: 160 mm Max. Tool Length: 315 mm Max. Tool Weight: 8 kg Max. Total Weight: 100 kg Feeds Rapid Traverse (X / Y / Z axis): 15 m/min Feed Rate: 10,000 mm/min MACHINE DETAILS Control Model: TNC 430 Heidenhain Total Power Requirement: 29 kW Dimensions & Weight Space Requirement: approx. 7.0 x 5.0 x 3.3 m Machine Weight: approx. 16.0 t EQUIPMENT Documentation Chip Conveyor Coolant System High-Pressure Coolant Measuring Probe (Manufacturer: Heidenhain) Internal Coolant Supply Note: The transport rigging must be arranged by the buyer!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 669, travel distance X-axis: 560 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 502, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 560 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Distance spindle center to table: 50 – 650 mm Distance spindle nose to table center: 100 – 610 mm Main spindle Max. speed: 12,000 rpm Drive power: 22 / 18.5 kW Tool holder: MAS BT-40 Spindle bearing diameter: 70 mm Pallet changer Number of pallets: 2 Pallet size: 400 x 400 mm Max. workpiece diameter: 580 mm Max. workpiece height: 650 mm B axis Indexing time 90°: 2.5 sec Pallet change time: 6.0 sec Tool changer Number of tool stations: 60 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent station empty: 125 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool-to-tool change time: 1.5 sec Chip-to-chip time: 3.7 sec Rapid traverse (X/Y/Z): 32 m/min Feed rate: 1 – 24,000 mm/min Creep feed rate: 0 – 1,260 mm/min MACHINE DETAILS Control: MSC 502 Total power requirement: 63 kVA Dimensions & Weight Required space approx.: 5.5 x 4.5 x 2.7 m Machine weight approx.: 9.0 t EQUIPMENT Documentation Chip conveyor Coolant system High-pressure coolant Internal coolant supply Tool magazine: 60 positions Pallet changer Pallets: 2 Signal lamp B axis Hydraulic unit Spindle oil cooler Gedpfsyxm Irsx Acwjir Note: The loading shaft must be supplied by the buyer.

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: TNC 430 Heidenhain, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm Main spindle Max. speed range: 12,000 rpm Drive power: 15 / 10 kW Max. torque: 500 Nm Tool holder: SK 40 Work table Clamping area: 1,500 x 1,050 mm Max. table load: 2,500 kg Number of T-slots: 10 T-slot width: 18 H7 mm T-slot spacing: 100 mm Tool changer Number of tool stations: 60 Max. tool diameter: 80 mm Max. tool diameter with free adjacent station: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Max. total weight: 100 kg Feeds Rapid traverse (X / Y / Z-axis): 15 m/min Feed rate: 10,000 mm/min MACHINE DETAILS Control model: TNC 430 Heidenhain Total power requirement: 29 kW Dimensions & Weight Space requirements: approx. 7.0 x 5.0 x 3.3 m Machine weight: approx. 16.0 t EQUIPMENT Giedpsyxmd Tjfx Acwjr Documentation Chip conveyor Coolant system Tool changer Note: Transport tackle must be organized by the buyer!

Condition: not inspected (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 822441, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN TNC 410 PA, spindle speed (max.): 6,000 rpm, No reserve price - guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel distances Giodpfxsyn Nvve Acwsr Travel X: 1,020 mm Travel Y: 510 mm Travel Z: 600 mm Spindle speed range: 40–6,000 rpm Drive power: 13 kW Spindle taper: BT 40 Number of tool stations in the tool changer: 22 Rapid traverse X and Y axes: 40 m/min Rapid traverse Z axis: 30 m/min Work table Length: 1,150 mm Width: 490 mm MACHINE DETAILS Control system: HEIDENHAIN TNC 410 PA Dimensions & Weight Dimensions (L x W x H): 2,800 x 2,400 x 2,400 mm Weight: 4,800 kg EQUIPMENT 3D probe Note: The machine vices mounted on the work table and the tool holders, including the tools installed in the tool magazine and spindle, are not included in the scope of sale and delivery. The oil mist extractor, which may be visible in the photos, is also not included in the scope of sale and delivery.

Condition: not inspected (used), Year of construction: 2000, operating hours: 8,523 h, functionality: unexamined, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 22, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine on time, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Travel distance X: 1,000 mm Travel distance Y: 500 mm Travel distance Z: 500 mm Table dimensions: 1,150 x 490 mm Number of tool positions in the magazine: 22 Spindle taper: SK 40 (DIN 69871-A40) Max. spindle speed: 10,000 rpm MACHINE DETAILS Gjdpfoyn Nwtsx Acweir Control: HEIDENHAIN TNC 426 Dimensions & Weight Dimensions (L x W x H): 4,500 x 3,500 x 2,700 mm Weight: 4,200 kg Operating Hours Automatic operation: 8,523 h Control on-time: 71,860 h EQUIPMENT Technical documentation Spare parts (as shown in the pictures) Note: Only a 7.5t truck can turn around on the company premises. It is recommended to send a smaller truck for collection.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 780 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 2,500 rpm, TECHNICAL DETAILS Travel Range X-axis: 1,600 mm Travel Range Y-axis: 1,000 mm Travel Range Z-axis: 780 mm Number of machining axes (excluding parallel axes): 5 Table Clamping surface (left-right): 1,000 mm Clamping surface (front-back): 1,000 mm Max workpiece weight: 6,000 kg Rotary axis: C > Positioning accuracy: 0.001° Milling Spindle/Head Spindle type: Swivel head > Positioning accuracy: 2.5° Speed range: up to 2,500 rpm Tool holder: ISO SK 50 Drive power: 22 kW Tool Magazine Tool positions: 60 Workpiece Automation Number of storage slots: 2 Pallet length: 1,000 mm Pallet width: 1,000 mm Number of pallets: 2 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Dimensions & Weights Space requirement (left/right): 6,400 mm Space requirement (front/back): 6,900 mm Giodpeyztl Nefx Acwor Overall height: 4,000 mm Total weight: approx. 26,000 kg

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 15507225, functionality: fully functional, operating hours: 9,980 h, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, number of slots in tool magazine: 32, rotational speed (max.): 20,000 rpm, rotational speed (min.): 50 rpm, TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 420 mm Travel Z-axis: 610 mm Feed rates: 1 - 20 m/min Machine pallet Pallet dimensions: 1,260 x 490 mm T-slots: 9 x 12H8, 50 mm spacing Max. spindle speed: 50 - 20,000 rpm Tool system Tool holder: SK30 Number of tools in magazine: 32 MACHINE DETAILS Gijdpjyznvcefx Acwjr Control: HEIDENHAIN iTNC 530M Dimensions & Weight Dimensions / Weight: 2,500 x 2,560 x 2,700 mm Installation dimensions: 4,300 x 2,950 x 3,012 mm Weight: 5,100 kg Connected load: 22 kVA Operating hours Spindle hours: approx. 9,980 h Control on-time: 78,165 h Machine on-time: 91,869 h Program run time: 54,682 h EQUIPMENT 3D touch probe, infrared Coolant system 3 bar / 30 l/min Oil mist extraction system Minimum quantity lubrication system with dual dispenser FEHLMANN HSC settings (Cycle 327) Note: The clamping devices and tools shown in the images are not included in the scope of delivery.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,560 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, rotational speed (max.): 20,000 rpm, No reserve price – guaranteed sale to the highest bidder! Giedpsyxm Swjfx Acwsr TECHNICAL DETAILS X-axis working area: 5,900 mm Y-axis working area: 1,560 mm X-axis travel speed: 80 m/min Y-axis travel speed: 60 m/min Z-axis travel speed: 25 m/min Drilling spindles Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 6 Horizontal drilling spindles in Y-direction: 2 Total number of vertical and horizontal spindles: 28 Milling spindles Number of controlled axes: 4 Motor power: 10 kW Spindle speed: 20,000 rpm Tool changer Number of positions: 10 Tool: head-mounted MACHINE DETAILS Total installed power: 24 kW Control system: WINDOWS Machine programming software: WRT EQUIPMENT Work table with suction cups Number of suction bar rows: 10 Suction cups for securing the workpiece Vacuum pump The machine is sold and delivered in its actual and legal condition ('as seen and approved') on the basis of photographic documentation and descriptive technical/commercial documents. The buyer is entitled to inspect the item before collection and is responsible for installation, securing and use of the machine at the final destination. External reference: 8173

Condition: ready for operation (used), Year of construction: 1999, operating hours: 51,147 h, functionality: unexamined, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 880 mm Travel Z-axis: 800 mm MACHINE DETAILS Control: HEIDENHAIN Operating hours Machine hours: 93,440 h Spindle hours: 51,147 h EQUIPMENT Tool changer Gjdsyxc Etepfx Acwjir Chip conveyor

Condition: ready for operation (used), Year of construction: 2002, operating hours: 41,245 h, functionality: unexamined, machine/vehicle number: 1113000335, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: HEIDENHAIN, Equipment: chip conveyor, TECHNICAL DETAILS X-axis travel: 880 mm Y-axis travel: 630 mm Z-axis travel: 630 mm Number of axes: 4 MACHINE DETAILS Control: HEIDENHAIN Operating hours Godpfx Aceyxc Dceweir Machine hours: 74,780 h Spindle hours: 41,245 h EQUIPMENT Chip conveyor Filtration system

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 32, TECHNICAL DETAILS Godpfxsyykhrj Acweir Travel X-axis: 1,250 mm Travel Y-axis: 500 mm Travel Z-axis: 600 mm Maximum spindle speed: 6,000 rpm Spindle taper: SK 50 Spindle cooling: 15 bar Table dimensions: 1,400 x 550 mm Tool changer positions: 32 MACHINE DETAILS Spindle power: 18.5 kW Dimensions (L x W x H): 4,500 x 2,350 x 2,650 mm Note: The machine is sold without vises and tools.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa Gjdeyr Utnjpfx Acwjir _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Fanuc G-Tech 16i, table length: 500 mm, TECHNICAL DETAILS Gsdpfx Acsy Atwuewjir X-axis travel: 600 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table size: 500 mm x 500 mm MACHINE DETAILS CNC control: Fanuc G-Tech 16i Tool magazine: 120 positions Internal cooling: 70 bar EQUIPMENT 6-fold pallet changer 4th axis Knoll high-pressure unit

Condition: excellent (used), Year of construction: 2014, Willemin-Macodel SA Model 308B 5 Axis Machining Center Mfd. 2014 X 160 mm Y 120 mm Z 150 mm # Axis 5 Power 7 hp RPM 30,000 RPM # ATC 28 Taper HSK E32 Willemin-Macodel SA Model 308B 5 Axis Machining Center (2014) X1 6.300" Y1 4.720" Z1 5.910" A1 360.000° B1 130.000° Gjdey Abcxopfx Acwjir Taper HSKE32 Rapid Feeds 1,181ipm Equipped With 5 Axis 28 Position ATC 30000 RPM Pallet Recognition Fire Protection Auto Fire Suppression Filter Mist Extraction

Condition: used, Year of construction: 2015, 5 Axis, Siemens 840d Sl 5-Axis Cnc Control 47.24" Full B-Axis Tilting & Contouring Rotary Table High Pressure Thru Spindle Coolant System 4-Station Integrated Pallet Loading System (Pw 3000) Specifications X 47.24" Y 51.18" Z 35.43" # Axis 5 Power 75 hp RPM 18,000 RPM # ATC 70 Taper HSK Table-L 47" Control CNC (Siemens 840D Sl 5-Axis CNC Control) Hermle C60U Mt Dynamic 5-Axis Cnc Milling & Turning Center With Pallet System (2015) Specification: X-Axis Travel 47.24" Y-Axis Travel 51.18" Z-Axis Travel 35.43" A-Axis, Table Tilt +130/-130 Degree B-Axis, Table Rotation .001 Degrees Table Diameter 47.24" Table Speeds, Max 400 Rpm Table Capacity 5,500 Lbs. Table Motor 75 Hp Milling Spindle Speed, Max 18,000 Rpm Milling Spindle Motor 46 Hp Milling Spindle Taper Hsk-T63 Automatic Tool Changer 70-Station Rapid Traverses 1980 Ipm Equipped With Siemens 840D Sl 5-Axis CNC Control Giodpfsy Abb Uex Acwsr 47.24" Full 5-Axis Tilting & Contouring Rotary Table Renishaw Spindle Probe Blum Tool Probe Full Enclosure 70-Station Automatic Tool Changer 4-Position Integrated Pallet Loading System (Pw 3000) High Pressure Thru Spindle Coolant System: 80 Bar/1000 Psi Kinematic Opt Software Paper Filtration System Camfil Mist Filter System Chip Conveyor X-Axis 47.24" Y 51.18" Z 35.43" Power 75 hp RPM 18,000 RPM # ATC 70