Used High Speed Machining Center for sale (89,131)

Condition: used, Year of construction: 1988, Dalmastroj BRB-3 Conventional quick-feed radial drilling machine Condition: Used Year of manufacture: 1988 Technical data: Drilling capacity in steel: Ø 30 mm Gedpfx Akezhualo Ujkb Overhang: 430 - 1000 mm Column diameter: 200 Workpiece height: 500 mm Drill spindle taper: MK 4 Speed range: 100 to 1120 rpm (8 speeds) Head swivel: 360° Motor power: 1.4 / 1.8 kW Connection: 400 V Machine weight: approx. 2100 kg incl. accessories Equipment: - Coolant foot with pump - Thread cutting device - Drilling depth stop - Drill chuck

Condition: ready for operation (used), Danube DR 23 - High-speed radial drilling machine - Drilling capacity / steel approx. 28 mm - Arm length approx. 700 mm Gedpfxeztdz Ae Ak Uskb - Morse taper MK 3 - Speed range 70-1550 rpm - gearbox - Feed rate range 0.075-0.3 mm - Drilling depth 130 mm - Threading device - Hydraulic clamping - Documentation Dimensions: L x W x H 2 x 1.7 x 1.9 meters / Weight 1900 kg Errors and omissions excepted.

Condition: used, Year of construction: 2008, High-speed radial drilling machine Alzrapid 32 With MK4 tool holder Quill feed, Thread cutting device, Gkjdpjzhbl Uofx Ak Uob Operating manual.

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Gjdpfxjikvcao Ak Uokb Spindle speed (min): 335/min Spindle speed (max): 1800/min Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Drive 6kw

Condition: excellent (used), Year of construction: 2014, operating hours: 11,440 h, DMG 5 axis Simultaneous HSC 30 Linear Year 2014 Heidenhian TNC640 Control Travel X320 / Y 300 / Z280mm B axis +/- 120 degree C axis 360 x 0.001 degree HSK-E40, 40,000rpm Swivel rotary table Touch Probe BLUM Tool Measuring system 3D Quick Set Application Tuning Cycle Air Blast through spindle Super Fine filter system Gjdpfx Asw Hxiwok Uekb c/w tooling ----- Clearance Sales -----

Condition: excellent (used), Year of construction: 1998, HIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a major factory overhaul by CHIRON Gkedpfx Akjzdklps Uob For sale: a vertical CNC machining center, CHIRON FZ 18 S MAGNUM High Speed, manufactured in 1998. The machine is equipped with a Siemens SINUMERIK control system, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also features an oil mist extraction system with a filter, plus air conditioning for the control system. The most important advantage of the offered machine is the major inspection and overhaul carried out by CHIRON in 2020. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available, confirming the scope of the overhaul. Technical specifications: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control system: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the major overhaul performed by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: ready for operation (used), functionality: fully functional, overall weight: 1,800 kg, Spindle: MK4 Clamping area: 1200 x 500 Clamping slots: Number 3, width 18, spacing 125 Gkodpfx Akszuarmj Ueb Maximum drilling capacity: for St 60 steel: 32 mm at 0.2 mm/rev for GG 20 cast iron: 45 mm at 0.2 mm/rev

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm Gedpfjyr Utnjx Ak Ujkb • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2014, Offer 26252 Technical data: - Drilling capacity in full steel ST 60: 22 mm - Drilling capacity GG 25: 32 mm - Thread cutting ST 60: M 20 - Thread cutting GG 25: M 24 - Drill spindle mounting: MK 4 - Quill stroke: 140 mm - 18 drill spindle speeds: 60 - 3050 rpm - Drilling feed, stepless: 0.075 - 0.15 - 0.70 mm/rev - Drilling radius min / max: 420 / 1320 mm - Swivel angle: 320° - Table size: 1200 x 600 mm - Table height: 905 mm - Motorized height adjustment / stroke of the drill column: 430 mm Gjdpjzwftzefx Ak Ujkb - Hydraulic column and arm clamping - T-slots, vertical, on the left side of the machine - Coolant system - Drive: 400 V / 1.1 / 1.6 kW - Space requirement: approx. W 1300 x H 1910 / 2340 x D 2700 mm - Weight: approx. 1800 kg

Condition: like new (used), Year of construction: 2023, operating hours: 400 h, functionality: fully functional, machine/vehicle number: 2022LW160, High-speed roll forming line, equipped with tooling for the production of GELAN and SCHUCO metal profiles used in PVC window frame manufacturing. Machine achieves speeds up to 55 m/min with 6 m profile length production. Maximum processable material thickness is 2.5 mm. Upper and lower shaft diameter is 60 mm, the width between the stands is 360 mm, and each station is driven by an individual gearbox with two cardan shafts. Both upper and lower shafts are driven at each station. The line features 15 forming stands plus two straightening stands (Turkish heads). All forming rollers have a surface hardness of 62 HRC. Additionally, all auxiliary rollers and shafts in contact with the material are induction-hardened to 58–62 HRC (including run-out table rollers and horizontal accumulator rollers). A flying cut servo positioning system (DELTA 7.5 kW servo motor, ball screw, and linear guides) facilitates precise length adjustments via HMI. Hydraulic cutting system included. The run-out table features an automatic profile kickout, conveying, and separation system for continuous production without stopping. The horizontal entry accumulator for strip material ensures uninterrupted production, equipped with pinch rollers and individual drives. Double-sided hydraulic decoiler included. The line is equipped with a continuous ink-jet marking system from KONING (Germany). The automatic stacking system is not installed (see photos). The machine features recirculating cooling and lubrication across all 15 stations. Gjdpfeyw Rzaex Ak Ujkb Electronics: SIEMENS (PLC, contactors), SCHNEIDER (contactors), DELTA (Taiwan drives and servo). Main electric motors by Siemens. Bearings by SKF. The mechanical frame is stress-relieved and milled for precision. The machine has only been used for test production, having processed just 250,000 m of material (machine is nearly new). It is installed and connected to power; test runs can be arranged on-site. The listed price refers to the machine disassembled and loaded onto a truck. Included is comprehensive documentation with detailed tooling setup instructions for each profile (including detailed assembly drawings of rollers). Model: LW160 Supply voltage: 380 V Installed power: 73.5 kW (consumes only 40% of power when processing 2 mm strip) Frequency: 50 Hz Weight: 16,500 kg Current: 160 A Serial number: 2022LW160 Year of production: 2022 Year of on-site assembly: 2023

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min Gksdpezt Twysfx Ak Ujb 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 56.604, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! MACHINE DETAILS Supply voltage: 400 V AC Rated current: 29 A Number of phases: 3 Gksdszzbcyspfx Ak Ueb Power: 17.1 kW Frequency: 50 Hz Short-circuit interrupting capacity: 10 kA RMS symmetrical EQUIPMENT Drilling tool Saw unit Vacuum pump Tools

Condition: ready for operation (used), functionality: fully functional, COLETT - Gamesa – Radial drilling machine “PORTABLE, operated by crane” -Outreach approx. 1200 mm -Universal swivel head -Spindle speeds 95 – 750 rpm -Automatic feed -Morse taper shank MK 4 -Outreach height-adjustable, approx. 1400 mm -Control cabinet / Retrofit Dimensions: L x W x H 2 x 1 x 2.1 meters / Weight 1600 kg Errors and omissions excepted. Gsdpfx Aozpfy Ssk Uekb

Condition: like new (used), Year of construction: 2022, operating hours: 10,000 h, functionality: fully functional, number of slots in tool magazine: 80, MAZAK HCN-5000 Horizontal Machining Center Year 2024 Control Unit: Smooth G X-axis travel: 730 Gkedpez Aauksfx Ak Ueb Y-axis travel: 730 Z-axis travel: 800 Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface: Tapped holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm (high torque) Spindle taper: ISO 40 Rapid traverse rate (X-axis): 60,000 Rapid traverse rate (Y-axis): 60,000 Rapid traverse rate (Z-axis): 60,000 Number of tools (ATC): 40-60-80 Maximum tool diameter (ATC): D. 95 D.170 Maximum tool length (from reference line) (ATC): 170 Tool selection method (ATC): FIXED Maximum tool weight (ATC): 12 Tool change time (ATC): 2.8 Coolant pressure: 15 Bar Coolant tank capacity: 500L Height (machine dimensions): 2813 Width (machine dimensions): 2623 Depth (machine dimensions): 5769 Weight (machine dimensions): 11430 Pallet size: 500x500

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min Gkedpfxovylh Ue Ak Uob voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: used, Year of construction: 2005, total height: 2,500 mm, total length: 7,500 mm, total width: 3,700 mm, Colour: Grey Godpozkudcefx Ak Uskb Empty weight: 9.600 kg Price: On request - Year: 2005 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Power [kW]: 24.0 - Number of axes [pcs]: 4 - X-axis travel [mm]: 2000 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 550 - C-axis rotation [°]: 360 - Table length [mm]: 2600 - Table width [mm]: 550 - Tool holder: ISO40 - Main spindle power [kW]: 22 - Min. spindle speed [rpm]: 20 - Max. spindle speed [rpm]: 12000 - Positioning accuracy [mm]: 0.01 - Travel speed [mm/s]: 667 - Options: Tool magazine, Chip conveyor, External cooling - Transport dimensions: 7500mm x 3700mm x 2500mm (l x w x h) - Transport weight [kg]: 9600kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1987, TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Year of manufacture: 1987 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanics, small holes / threads. Godpfx Ajwifd Hsk Uskb Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: good (used), Donau DR 40 Z High-Speed ​​Radial Drilling Machine Gksdpfx Akjznkd Te Ueb The Donau DR 40 Z is a powerful, conventional high-speed radial drilling machine designed for trade and industrial applications. It is characterized by its high flexibility and a swiveling, extendable arm, enabling fast and precise machining of workpieces. Technical Specifications Drilling capacity: Up to 40 mm in steel and 50 mm in cast iron. Tapping capacity: Max. M33 in steel and M45 in cast iron. Tool holder: MT 4 (Morse Taper 4). Spindle stroke: 200 mm. Reach: Variable from 320 mm to 1140 mm. Workpiece height: Max. approx. 700 mm. Table size: 1200 x 750 mm. Speed ​​range: 45 to 2240 rpm. Feed rate: 0.075 to 0.6 m/min. Drive power: Approx. 6 kW. Weight: Approx. 1.8 to 2.0 tonnes. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Year of construction: 2008, operating hours: 24,663 h, condition: ready for operation (used), functionality: fully functional, working width: 2,200 mm, machine/vehicle number: 0-241-06-7504, TECHNICAL DETAILS Saw blade overhang: 125 mm Main saw motor: 18 kW Feed rate: 1–150 m/min Max. clamping width: 2,200 mm FEEDING SYSTEM Gksdpfx Ajzxgf Usk Uob Lift table dimensions: approx. 4,300 × 2,200 mm Lift table load capacity: 7 t MACHINE DETAILS Operating hours: approx. 24,663 h (as of 05.10.2023) EQUIPMENT Automatic panel feeding system Lift table feeding system Longitudinal/cross-cutting unit Roller conveyor and transport system

Condition: good (used), Year of construction: 1988, machine/vehicle number: 77796, Offer 25071 Technical data: - Electro-hydraulic raising and lowering of the saw bow - Saw blade dimensions: 400 x 45 x 2.0 mm - Cutting range - 90° round: approx. 250 mm - flat: approx. 250 x 130 mm Godpfx Akswzu A Aj Uskb - square: approx. 220 x 220 mm - Max. vice opening width: 405 mm - Stroke and cutting speeds adjustable - Mitre-adjustable vice - Electric motor with coolant unit - Drive: 380 V / 2.0 kW - Required space: approx. W 550 x H 1270 x D 1700 mm - Weight: approx. 380 kg

Condition: good (used), Year of construction: 1983, Stock number: 3005 Manufacturer: HKS Singen Year of manufacture: 1983 Machine number: 401044 Model: HKS 40 Drilling capacity: 40 mm Spindle taper: MK 4 Speed range: 26 to 1,940 rpm Feed: 0.05 to 0.45 mm/rev Table: 1,520 x 740 mm Clamping surface: 1,370 x 610 mm Gkedpfewu Ilwex Ak Ueb Outreach min/max: 400 / 1,120 mm Stroke: 200 mm Swiveling range: 360° Vertical adjustment of arm: mm Horizontal adjustment of arm: 720 mm Accessories: Connection: 6.5 kW Footprint: 1,500 x 1,100 mm 2nd plate: 1,500 x 1,000 mm Dimensions: 1,800 x 1,600 x 2,700 mm Weight: 2.3 t

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 7,990 kg, CHIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a comprehensive factory overhaul by CHIRON For sale is a CHIRON FZ 18 S MAGNUM High Speed vertical CNC machining center manufactured in 1998. The machine is equipped with Siemens SINUMERIK control, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also has an oil mist extraction system with a filter. The most important advantage of the offered machine is the comprehensive inspection and overhaul carried out in 2020 by CHIRON. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available for the work performed, confirming the scope of the overhaul. Technical data: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the comprehensive overhaul carried out by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Gkodpfxezdkhqs Ak Uob Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: good (used), Donau DR 32 High-Speed ​​Radial Drilling Machine A high-precision, robust high-speed radial drilling machine valued for its reliability in mechanical engineering and industrial manufacturing. Thanks to its swiveling arm, it allows for the quick and flexible positioning of the drill head over the workpiece. Technical Specifications Drilling capacity: Max. 32 mm in steel. Tool holder: MT 4 (Morse Taper). Speed ​​range: Approx. 41 to 1,800 rpm. Quill stroke: 190 mm to 200 mm. Gkedpfoznkgnsx Ak Ujb Reach: Flexibly adjustable from approx. 240 mm to 850 mm. Table size: 1,200 x 600 mm. Typical Features Tapping function: Integrated automatic system for thread cutting (e.g., up to M26 in steel). Feed rates: Automatic quill feed with multiple settings. Coolant system: Integrated pump and coolant channel directly on the work table. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, Year of construction: 1987, We are offering this used Donau DR 40-Z high-speed radial drilling machine, year of manufacture 1987. Manufacturer: Donau Model: DR 40-Z Gjdpsy Dn E Njfx Ak Ujkb Serial number: 1146-3 If you have any questions or require further information, please feel free to send us a message. The machine is located in Osterode/Harz. Viewing can be arranged by appointment. This is a used machine, therefore we sell under exclusion of any warranty.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, empty load weight: 13,000 kg, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 1,100 mm Travel range, Z-axis: 500 mm C-axis rotation: 360° Tool magazine slots: 32 pcs. MACHINE DETAILS Gjdszxckmjpfx Ak Uekb Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Dry weight: 13,000 kg Transport packages: 3 pcs. EQUIPMENT Documentation CE marking