Used Baz Horizontally for sale (6,511)

Condition: used, Machine is not operational, control system does not start. Horizontal machining center with pallet changer, STEINEL type BZ 24 FFZ with CNC control system SIEMENS Sinumerik 850 M Mfg. No. 58, Year of manufacture 1990 Travel range X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet: 400 x 400 mm Pallet rotation: B-axis Spindle speed: max. 7100 rpm, stepless Tool holder: ISO 40 Mains connection: 380 Volts, 50 Hz, 80 Amps - Tool changer with 60 tool positions and dual-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with transverse movement as Y-axis - Coolant spray nozzles on the spindle ram and in the working area - Coolant system with chip conveyor under the working area - CNC control system SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Space requirement L x W x H: 9000 x 3100 x 3200 mm Weight: 13.5 tons Machine is not operational, control system does not start – otherwise in good condition. Nwedpfxodzqmfj Ad Ssh Transport dimensions: Machine with tool magazine L x W x H: 9000 x 3000 x 3000 mm Chip conveyor L x W x H: 4700 x 1000 x 1450 mm

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Nwsdjzcuyispfx Ad Seh Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates the bidder to collect the machine on schedule in week 30 of 2026! TECHNICAL DETAILS Travel range X-axis: 1,000 mm Travel range Y-axis: 900 mm Travel range Z-axis: 900 mm Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600 mm tools: 80 Part accuracy: 0.001° MACHINE DETAILS Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h EQUIPMENT ATC with 320 positions 80 positions for 600 mm tools 2 pallets Nwjdpfx Aozd Tapod Ssh Balluff writing/reading system NC table Absolute scales in X, Y, and Z Renishaw MP10 measuring probe Tool breakage monitoring MOP tool monitoring 30-bar coolant system Mayfran Consep 2000 chip conveyor

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, center width: 1,500 mm, center height: 250 mm, swing diameter over bed slide: 500 mm, spindle speed (max.): 2,800 rpm, controller model: Monforts Control System MTC K, The machine was overhauled in 2017! The corresponding invoices are available upon request. TECHNICAL DETAILS Swinging diameter over bed: 500 mm Swinging diameter over slide: 290 mm Distance between centers: 1,500 mm Spindle bore: 70 mm Center height: 250 mm Spindle speed: 2 - 2,800 rpm MACHINE DETAILS Control system: Monforts Control System MTC K Control method: Teach-in Dimensions & Weight Dimensions (L x W x H): 3,350 x 1,550 x 1,800 mm Net weight: 3,300 kg Transport packages: 1 Nwedpfjzdfzasx Ad Seh EQUIPMENT Fixed steady rest 3-jaw chuck Documentation CE marking

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, pressing force: 42 t, empty load weight: 1,000 kg, TECHNICAL DETAILS Bending capacity: 42 t Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Stroke length: 300 mm Stroke width: 200 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Shipping weight: 1,000 kg Shipping packages: 2 units EQUIPMENT Nwjdjzdfb Tjpfx Ad Seh Documentation CE marking

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 3,500 rpm, travel distance X-axis: 271 mm, travel distance Y-axis: 600 mm, center width: 600 mm, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning diameter over bed: 350 mm Distance between centers: 600 mm Bed width: 210 mm Travel in X-axis: 271 mm Travel in Y-axis: 600 mm Spindle bore: 62 mm Maximum spindle speed: 3,500 rpm MACHINE DETAILS Control system manufacturer: Siemens Power: 30.0 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 2,100 x 2,100 mm Net weight: 5,000 kg EQUIPMENT Chip conveyor Three-jaw chuck Nedpfszdd Npjx Ad Sjwh Bar feeder Driven tools C-axis Note: The parameters are stored, but are lost if the power supply is interrupted. As long as the power supply is maintained, this is not a problem.

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 18966, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Njdpezdy S Sjfx Ad Sjwh Working area, X-axis: 3,309 mm Working area, Y-axis: 1,703 mm Working area, Z-axis: 120 mm Table length: 3,100 mm Table width: 1,500 mm Number of milling spindles: 1 Number of controlled axes: 3 Tool clamping system: HSK-F63 Tool changer positions: 12 MACHINE DETAILS System/Software: BiesseWorks Capacity: 360 m³/h Connection diameter: 70 mm Vacuum: 300 bar Main motor power: 11 kW Power consumption: 24 A Power: 14.2 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,350 x 2,000 mm Empty weight: 1,530 kg Transport packages: 2 Vacuum pump Busch MM 1322 A VM8 Year of manufacture: 2012 Main motor power: 6 kW EQUIPMENT CE marking CE certificate Documentation (Electrical diagrams, parts list, technical data, user manual (NL, paper form)) Safety fence, safety light curtain Milling table: Flat table Material clamping system: Pneumatic

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: AA1/015406, functionality: fully functional, operating hours: 14,808 h, working width: 1,300 mm, spindle speed (max.): 24,000 rpm, working height: 200 mm, working length: 3,110 mm, No minimum price – guaranteed sale to the highest bidder! The machine is still in operation and can be inspected while powered on. TECHNICAL DETAILS Working area X-axis: 3,110 mm Working area Y-axis: 1,300 mm Working area Z-axis: 200 mm Maximum travel X-axis: 3,500 mm Maximum travel Y-axis: 1,815 mm Maximum travel Z-axis: 440 mm Table length: 3,050 mm Table width: 13 mm Number of milling spindles: 1 Spindle speed: 600 - 24,000 rpm Number of controlled axes: 5 Horizontal drilling spindles: 6 Vertical drilling spindles: 12 Tool changer positions: 16 MACHINE DETAILS Main motor power: 11 kW Main motor power of the vacuum pump: 5.5 kW Capacity of the vacuum pump: 250 m³/h Dimensions & Weight Dimensions (L x W x H): 9,000 x 2,450 x 2,850 mm Installed dimensions (L x W x H): 4,600 x 6,500 x 3,400 mm Shipping dimensions: 9,000 x 2,450 x 2,850 mm Empty weight: 4,000 kg Shipping packages: 1 unit Operating hours: 14,808 h EQUIPMENT Milling table: Beam table Nsdpfxjzdy E Sj Ad Sewh Tool clamping system: HSK-F63 Material clamping system: Pneumatic Drilling tool Saw unit System/Software: Xilog plus Safety feature: Safety mat Vacuum pump: Becker CNC options: Chip conveyor, Hand control CNC documentation: User key/licenses

Condition: ready for operation (used), operating hours: 41,072 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 20, TECHNICAL DETAILS Travel in X-axis: 630 mm Travel in Y-axis: 560 mm Travel in Z-axis: 560 mm Spindle speed: 12,000 rpm Feed rate: 20-10,000 mm/min Rapid traverse rate X/Y/Z: 26/26/20 m/min Number of positions in tool changer: 20 Spindle mount: SK 40 Table surface area (L x W): 1,000 x 600 mm MACHINE DETAILS Nwjdpfx Adjzd Aw Do Seh Control system model: Heidenhain TNC 430 Total power consumption: 26 kW Operating hours: 41,072 h Machine weight: approx. 6.5 t EQUIPMENT B-axis (NC milling head) Electric handwheel Chip conveyor Cooling system

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,877 h, functionality: fully functional, machine/vehicle number: NH501CD0388, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 730 mm, controller model: Fanuc MGS-501, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 650 mm Travel range, Y-axis: 600 mm Nwedszcla Hjpfx Ad Sjh Travel range, Z-axis: 730 mm Rapid traverse rate, X-axis: 50 m/min Rapid traverse rate, Y-axis: 50 m/min Rapid traverse rate, Z-axis: 50 m/min Maximum workpiece height: 900 mm Maximum workpiece diameter: 730 mm Maximum workpiece weight: 500 kg Table dimensions: 500 x 500 mm Table load capacity: 500 kg Maximum spindle speed: 8,000 rpm Distance from table center to spindle nose: 100 mm Number of spindles: 1 Torque: 302 Nm Number of tool positions in the tool magazine: 60 Tool length: 500 mm Tool diameter: 120 mm Tool weight: 30 g Tool holder type for turret 1: ISO 50 MACHINE DETAILS Control system: Fanuc MGS-501 Rated apparent power: 73 kVA Input voltage: 380 V Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 4,900 x 2,595 x 2,770 mm Total weight: 13,200 kg Operating hours (according to diagram): 28,877 h Power-on time (according to diagram): 94,850 h EQUIPMENT CE marking Documentation/Manual Spindle speed infinitely adjustable Chip conveyor

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 813 mm Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Power: max. 22.4 kW Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Nwjdpfx Aszd Tcdod Sjh Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Tool diameter with full tooling: max. 102 mm Tool diameter with free adjacent positions: max. 254 mm Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Operating hours (see image) Spindle hours: 1,752 h Servo hours: 15,789 h

Condition: used, Year of construction: 2005, x-travel 800 mm y-travel 800 mm z-travel 800 mm Control Siemens 840D total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m Nwodpfxszhch Dj Ad Soh

Year of construction: 2026, condition: used, consisting of: 1x 20-foot sea container converted into a roll-off container, dimensions: height approx. 2.78 m, width approx. 2.45 m, length approx. 6.15 m, 1x horizontal drilling rig, manufacturer unknown, 1x mixing/pumping system, manufacturer unknown, 1x diesel generator, brand Honda, various accessories, including drilling rods, hoses, approx. 2 access ramps, warning signs and small parts, completeness cannot be guaranteed, inspection recommended after scheduling an appointment. Nwedpozha D Nefx Ad Sjh

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Technical details grinding length 800 mm grinding width 400 mm workpiece height 375 mm weight of the machine ca. 3,5 t Additional information CNC Precision Surface and Profile Grinding Machine This machine is ideally suited for precision applications in tool and mold making. Technical Details: Grinding surface: 800 x 450 mm Nwedpfx Aszg Udhod Seh Grinding area: 800 x 400 x 375 mm Table load (max.): 700 kg X-axis = Longitudinal movement of worktable Table longitudinal stroke: 20 - 850 mm Table drive: Electromechanical with toothed belt drive Table speed: 5 - 35,000 mm/min Table setup: Electric handwheel and direction push button Y-axis = Vertical movement Distance from table to spindle center: 140 - 525 mm Vertical drive: Electromechanical with ball screw Vertical speed: 50 - 2,000 mm/min Vertical adjustment via electric handwheel and direction pushbuttons Minimum infeed 0.001 mm Measuring system: glass scale Z-axis = Transverse movement Maximum transverse travel 400 mm Drive type: electromechanical with ball screw Transverse speed 50 - 2000 mm/min Transverse travel adjustment via electric handwheel and direction pushbuttons Measuring system: glass scale C-axis = Grinding spindle Grinding spindle motor 7 kW Grinding spindle speed 1400 rpm Grinding wheel standard 300 x 50 x 76.2 mm Spindle bearing: Precision roller bearing Lubrication: Lifetime lubrication Connected load: approx. 19 kVA Total weight: 3500 kg Equipment: - Electro-permanent magnetic chuck Clamping surface 800 x 400 mm, Pole spacing 18 mm, with 16-stage holding force control and automatic Magnetic pole reversal for demagnetization - Leveling blocks For setting up and leveling the machine - Grinding wheels and two flanges - Partial enclosure Open at the top for loading with a sliding door - Dressing system Consisting of a holder for a prism arm or fork dresser Practicle arm for single-point diamond (MK O) or shaped diamond - Grinding spindle speed control Peripheral speed 10-32 m/s The peripheral speed of the grinding wheel is kept constant (V-constant control) with a 7 kW grinding spindle motor - Universal paper belt filter unit UPF 100 Tank capacity approx. 280 liters, Pump capacity 20 liters/minute at 1.5 bar - Air purifier Flow rate approx. 1000 m³/h - Compressed air ports For easier removal of large workpieces with a manual compressed air valve in the machine's work area. - Mobile balancing unit With optical operator guidance for dynamic balancing of the grinding wheel directly in the machine. Imbalance size and position are calculated automatically. With transport case. - Cleaning set Hand-held impulse nozzle for cleaning the work area - Documentation/Manual For sale is our reliably operating grinding machine from mold making. The machine was purchased new in 2016 and is in good technical condition, having been used for a maximum of 20 hours per week. It runs perfectly and is being sold solely due to an investment in a larger model.

Condition: ready for operation (used), Year of construction: 1997, - USED - 4-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1500 mm Y-AXIS TRAVEL: 1200 mm Z-AXIS TRAVEL: 1250 mm SPINDLE: 10-4000 rpm; 40 kW; HSK-A 100 PALLET: CONTINUOUS ; 1000X1000 mm; 1-500 rpm MAX ADMITTED LOAD: 2000 Kg TOOL MAGAZINE: CHAIN-TYPE ; 161 POS CONTROL UNIT: SIEMENS 840 C OVERALL DIMENSIONS: 8500 x 4800 x 4800 mm ACCESSORIES: SWARF CONVEYOR ; PAPER FILTER NOTE: COMPLETELY OVERHAULED MACHINE; HORIZONTAL AND VERTICAL AUTOMATIC HEAD; TURNING TABLE Nwedpfx Adsh Hfrnj Sjh

Condition: new, functionality: fully functional, Year of construction: 2026, ! Short delivery time, under 10 weeks! Model designation: Impuls Packaging Box-Motion BF Production orientation: Horizontal Conveying system: Chain conveyor belt or infeed belt Film feed: From below Forming shoulder: Flexible and fixed Operator display: 10" touchscreen with memory functions, pivotable via outrigger arm for comfortable operator handling Drives & control: 9 servo motors and PLC control Package length: 120-600 mm Package width: Max. 350 mm (depending on film width) Package height: Max. 150 mm (depending on forming shoulder) Speed: 10-60 bags/min. Film width: Up to 900 mm, depending on model Machine weight: Approx. 900-1500 kg Machine material: 304 stainless steel Registration mark sensor: Yes External compressed air required: Yes Printer mount: Available at extra cost Delivery time: Current delivery time under 10 weeks Features: • Box-motion end sealing • Manual reel fixation without compressed air • Automatic reel centering for precise application • Automatic stop with empty products (no product – no bag) • Easy touch screen operation via color icons • Continuous product feed through sensor-based control • Registration mark sensor included Nsdpfxoq Ikgye Ad Sjwh • Safety protection covers • 3-sided seam packaging (fin seal) + longitudinal seal • Can be combined with upstream and downstream machines • Customer-specific modifications/designs on request Additional options (on request and at extra cost): • Thermal transfer printer, e. g. for best-before dates, print width up to 60 mm • Euro hole punch, etc. • Gas flushing units for modified atmosphere packaging (extends product shelf life) • Automatic product infeed systems, intermittent push-in systems • Length-dependent product processing via photoelectric sensors

Condition: good (used), Year of construction: 2011, Ref. -No.: 10598 Manufacturer: HELLER Type: MC 2000 Year of construction: 2011 Type of control: CNC-Steuerung Control: Siemens 840 D sl Storage location: Halberstadt Country of origin: Hermany Machine-No.: 50XXXX X-Travel: 800 mm Y-Travel: 800 mm Z-Travel: 1000 mm Work spindle torque (25% ED): 242 Nm Tool Taper: SK 40 Numbers Of Tools In Magazin: 54 Tool Piece Magazine With: 80 Pcs./pcs. Turning Speeds: 10000 RPM Drive Capacity - Spindle Motor: 17 kW High-Pressure Pump: 50 bar Speed range - main spindle: 10000 RPM Numbers Of Pallets: 2 Size Of Pallet: 630 x 500 mm Weight Of The Machine Ca.: 13000 t spindle running time: 7000 H Operating hours: 14000 H Preparation area: 4 x 90° hydraulic pressure: 200 bar Nwsdpfx Aex Hn D Rod Seh Further information: - The machine has been measured - The geometry is in excellent condition - The spindle runs a little rough - Clamping towers and cutting tool holders are also included - 2 additional clamping towers - 2 replacement pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in the work area - Central cooling unit for motor spindle and control cabinet - Control unit at the workpiece setup station - NC-controlled rotary table - Clamping hydraulics The machine can be viewed under power by appointment.

Condition: good (used), Year of construction: 2017, Ref. -No.: 10596 Manufacturer: HELLER Type: H - 2000 Year of construction: 2017 Type of control: CNC-Steuerung Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: 56XXX X-Travel: 630 mm Y-Travel: 630 mm Z-Travel: 630 mm B-Axis: 0,001 ° Table Load: 500 kg Max. Tool Length: 350 mm Max. Tool Diameter: 160 mm Tool Taper: HSK 63 Numbers Of Tools In Magazin: 80 Turning Speeds: 16000 RPM Tool changer: Doppelgreifer Max. Workpiece height: 850 mm Max. Torque: 95 Nm Rapid Travel X/Y/Z: 60 mm / min Rapid Traverse X-Axis: 80 m / min Rapid Travel Y-Axis: 80 m / min Rapid Traverse Z-Axis: 90 m / min Drive Capacity - Spindle Motor: 40 kW Internal cooling: 50 bar Numbers Of Pallets: 2 Size Of Pallet: 400 x 500 mm spindle running time: 1000 H Operating hours: 3000 H Workpiece interference circuit max.: 720 mm Media interface: 5 - fach Nsdpfxex Hn D Dj Ad Sowh Further information: - Equipped with NC rotary table. - State-of-the-art spindle technology. - Ideal for precise machining tasks. - Spindle hours: 1000. - Pallet can be rotated manually 4 x 90 - Hydraulic pressure 200 bar - Quick drill breakage check Machine can be viewed under power by arrangement

Condition: good (used), Year of construction: 2011, Ref. -No.: 10565 Manufacturer: TOYODA Type: FH 630 SX Nwsdpfx Ajxvw I Ied Ssh Year of construction: 2011 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS3XXXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Distance Spindle /Table: 200 - 1050 mm Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Rapid Travel X/Y/Z: 60 mm / min Tool to tool: 2,4 sec Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Pallet height: 1200 mm Positioning (X, Y and Z axes):: + - 0,003 mm Repeatability (X, Y and Z axes):: + - 0,0015 mm Payload pallet: 800 kg Axial: 14700 N Further information: - Cutting feed (same for X-, Y- and Z-axis): 0.001 - 30m/min - Distance between spindle center and upper edge of the area: 100mm - 900mm - Table size range: 630 mm - Positioning of the lower table: 1 ° - Positioning of the rotary table: 0.001 ° - Tools used: SK 50 - Operating oil: 53l - Slide lubricating oil / spindle head lubrication: 3.0 l - Coolant for spindle & ball screw head: 37l Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Nwjdpfsxvw Izjx Ad Soh Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2012, Ref. -No.: 10558 Manufacturer: YOU JI Type: HMC 1200 BP Year of construction: 2012 Type of control: CNC-Steuerung Nedpsxxpbxjfx Ad Sowh Control: FANUC Series 18i-MB Storage location: Halberstadt Country of origin: Taiwan X-Travel: 1800 mm Y-Travel: 1500 mm Z-Travel: 1360 + 990 mm B-Axis: 360 ° W-Axis: 700 mm Table Dimensions (Lengthxwidth): 1200 x 1400 mm Table Load: 5.000 kg Max. Tool Weight: 25 kg Max. Tool Length: 400 mm Max. Tool Diameter: 125 mm Spindle Speed: 30 - 3.500 RPM Numbers Of Pallets: 2 Further information: 4-axis simultaneous machining IKZ (internal spindle cooling) AKZ (external spindle cooling) Synchronized walking (rigid thread cutting) Renishaw RMP60 workpiece probe (radio) Number of pallet changers for automatic pallet change: 2 Size: 1200 x 1400 mm Tool magazine, number of tools: 60 The machine is currently in production and can be viewed by appointment.

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Nwsdpfx Adjwgnz Ao Ssh Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges. Control doesn't work continuesly !!

Condition: excellent (used), Year of construction: 2007, CNC Control: MSX-501III Nsdjythprepfx Ad Sswh X axis mm: 730 Y axis mm: 730 Z axis mm: 850 B axis mm: 0.001 Pallet size mm: 500 x 500 Number of pallets: 2 Table load capacity kg: 500 Cutting feed mm/min X, Y, Z: 50,000 Max. rapid traverse m/min X, Y, Z: 50, 50, 50 Spindle speed rpm: 14,000 Spindle power kW: 22/18.5 Taper type: BT-40 Torque Nm: - Tool changer type: Chain Tool magazine positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent pockets empty: 140 Max. tool length mm: 500 Max. tool weight kg: 8 Coolant tank capacity l: 760 Through-spindle coolant bar: Yes Equipment Chip conveyor Internal coolant Rigid tapping Manuals, electrical diagrams, etc.

Condition: excellent (used), Year of construction: 2011, TECHNICAL DETAILS CNC control: MSX-501III X axis mm: 560 Y axis mm: 560 Z axis mm: 660 B axis deg.: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X,Y,Z: 60,000 Max. rapid traverse m/min X,Y,Z: 50 Spindle speed rpm: 12,000 Spindle power kW: 15 Taper type: ISO-40 Torque Nm: 120 Tool changer type: Chain Tool changer positions: 60 Max. tool diameter mm: 70 Max. tool diameter with adjacent positions empty mm: 170 Max. tool length mm: 450 Max. tool weight kg: 8 Coolant tank capacity l: 500 Through-spindle coolant (high-pressure): Yes EQUIPMENT Double chip conveyor ISO-40 taper High-pressure through-spindle coolant with pump Tool breakage detection probe Part measuring probe RENISHAW MACHINE DIMENSIONS Length mm: 3,755 Njdpexfka Nefx Ad Sjwh Width mm: 2,300 Height mm: 2,610 Weight kg: 7,600

Condition: used, Year of construction: 2002, Used machine Year of manufacture: 2002 Cutting area: 4200 x 4200 mm Maximum cutting height: 80 mm Saw blade protrusion: 92 mm Main saw motor: 11 kW Scoring saw motor: 2.2 kW Total electrical connected load: 19.5 kW, 41 amperes Required air pressure: 8 bar Extraction: 4000 m³/h Saw feed speed, stepless: 0 - 70 m/min Rip fence speed: 0 - 80 m/min (max. output: 25 m/min) Main saw blade: 350 x 4.4 x 30 Z 72 TF Scoring saw blade: 180 x 4.4/5.4 x 30 Z 28 VR conical Net weight approx. 6000 kg Nwsdpfx Adjyt Tkus Soh Availability: by arrangement Storage location: Rhineland-Palatinate