Used machining centers (horizontal) X-axis travel 400-599mm for sale (77)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Horizontal Machine Center DMG MORI NH 5000DCG/40 Year 2010 Tavel X 730 Y 730 Z850mm Fully C axis 0.001 degree Nodps Ad Uciefx Ag Ielh MAPPS FAUNC Spindle 14,000rpm 37/22KW 303Nm HSK-A63 Taper 60 ATC Pallet 500 x 500mm

Condition: good (used), Year of construction: 2016, operating hours: 36,629 h, functionality: fully functional, machine/vehicle number: 196091, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 560 mm, feed length Y-axis: 560 mm, feed length Z-axis: 625 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 42 kVA, controller manufacturer: Okuma, controller model: OSP-P300M, workpiece weight (max.): 400 kg, total height: 2,650 mm, total length: 4,700 mm, total width: 2,420 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, overall weight: 9,500 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 22,704 h, coolant supply: 50 bar, spindle motor power: 26,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer a used Okuma MB-4000H, a 4-axis CNC horizontal machining center, manufactured in 2016 (produced in June 2016), in good condition. Manufacturer: Okuma Nodpfs Ad Rclox Ag Ielh Model: MB-4000H Serial number: 196091 Year of manufacture: 2016 Condition: used, good condition Key specifications: - CNC control: Okuma OSP-P300M - X/Y/Z travels: 560 / 560 / 625 mm - 2 pallets, 400 x 400 mm, with automatic pallet changer - Maximum pallet load: 400 kg - B-axis: NC table with 0.001° indexing - Spindle: BT40, 15,000 rpm, power 26 / 18.5 kW (30 min / continuous) - Rapid traverse rates X/Y/Z: 60 m/min - Automatic tool changer with 60 positions - Coolant through spindle with high-pressure pump - Tool wear/breakage monitoring probe - Power supply: 400 V - 3-phase - 50 Hz, 42 kVA - Approximate weight: 9,500 kg; approximate footprint: 2,420 x 4,700 x 2,650 mm Machine hours recorded (09/29/2026): - CNC on: 45,737 h - Operating: 36,629 h - Cutting time: 17,380 h - Spindle active: 22,704 h Accessories, tools, and tool holders: to be agreed upon. Complete technical data sheet with photos available upon request. Available for viewing by appointment. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller model: Siemens, workpiece weight (max.): 100 kg, total height: 3,030 mm, total length: 5,400 mm, total width: 6,265 mm, overall weight: 24,000 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 32,000 W, number of spindles: 2, number of slots in tool magazine: 100, Equipment: CE marking, chip conveyor, documentation/manual, type plate available, SAMAG MFZ 4-2W CNC twin-spindle machining center Nledpfoz Nlzzox Ag Ieh For sale: SAMAG MFZ 4-2W CNC machining center, currently in working order and available for inspection at our facility. The machine is ideal for high-productivity machining thanks to its twin-spindle configuration and has been maintained in good working condition. >Included in the supply: Spare electro-spindles Spare B-axis motors Spare W-axis motors Spare A1/A2 motors Machine documentation available (mechanical and electrical) >Main features: CNC twin-spindle machining center Year of manufacture: 2014 Machine in working order Inspection and testing possible on-site by appointment The inclusion of spare parts represents a significant added value, allowing for reduced time and costs for any future maintenance work. The system includes a chip extraction system for cast iron components from Knoll, complete with a filter mat for managing the emulsion for coated parts. Spindle mount: HSK-80 The 3D (step) model of the machine is also available for use with simulators. IMPORTANT: The machine will be sold without tooling, as it is specific to the components being produced! For further information, photographs, videos of the machine in operation, or to arrange a visit, please contact the seller directly.

Condition: like new (used), Year of construction: 2018, operating hours: 240 h, functionality: fully functional, travel distance X-axis: 460 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 410 mm, feed rate X-axis: 48,000 m/min, feed rate Y-axis: 48,000 m/min, feed rate Z-axis: 48,000 m/min, controller manufacturer: siemens 828D, controller model: 828D, total height: 2,602 mm, total length: 3,350 mm, total width: 2,265 mm, table width: 320 mm, table length: 320 mm, table load: 250 kg, rotational speed (max.): 200 rpm, overall weight: 6,200 kg, spindle speed (max.): 18,000 rpm, coolant supply: 20 bar, distance table center to spindle nose: 60 mm, spindle motor power: 23 W, spindle nose: hsk63, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Due to the cessation of business operations, we are offering this like-new Hardinge H320 horizontal machining center, manufactured in 2018. Model: H320 Serial number: GHLB7G0001 Date of manufacture: 05/31/2018 Supply voltage: 400 V Number of phases: 3 Weight: 6200 kg Cooling on the ball screw spindles Spindle cooled Glass scales on all axes High-speed 4th axis with direct drive motor, 200 rpm Scraper chip conveyor Nodpfx Aj Aazdxsg Ijlh It is also possible to take over the tool holders and machine clamps. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1990, operating hours: 18,960 h, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, controller manufacturer: Mitsubishi CNC Co., total height: 2,206 mm, total length: 2,490 mm, total width: 3,220 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 7,200 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 7,000 rpm, spindle motor power: 5,500 W, spindle mount: MK 4, number of spindles: 1, additional equipment features: + same Extra Machine for spare parts!, Equipment: chip conveyor, documentation/manual, We offer this very good Mazak H400 horizontal machining center, year of construction 1990. Nedez E I Twepfx Ag Islh Manufacturer: MAZAK Model: H400 NC number: M335M038240 Manufacture date: April 1990 Serial number: A81117 EXTRA NOTES: - The price includes AN EXTRA Machine as the one provided for SPARE PARTS! (attached pictures) - The offer includes many Tool Holders, Coillets, two fixturing Hubs! If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2080403, CNC Horizontal 5-Axis Double-Spindle Machining Center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of Manufacture: 2017 Machine Number: 2080403 Control System: CNC Siemens 840 Number of Axes: 5 Number of Spindles: 2 Double Table System Travel Ranges X/Y/Z: 600 / 600 / 510 mm Spindle Speed: up to 17,500 rpm Rapid Traverse: up to 45 m/min Tool Interface: HSK-A63 Machine Weight: approx. 16,000 kg Equipment: Standard accessories Powerful CNC horizontal machining center with a double spindle and double table system for precise and efficient series production. Location: Maribor, Slovenia Availability: By arrangement Nlsdpfxo Aarqpe Ag Ieh Inspection possible by appointment.

Condition: used, Year of construction: 2006, operating hours: 6,526 h, functionality: fully functional, machine/vehicle number: SN0575, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, nominal power (apparent): 40 kVA, controller manufacturer: Fanuc, controller model: 16i, total height: 2,800 mm, total length: 4,800 mm, total width: 2,800 mm, table width: 400 mm, table length: 400 mm, overall weight: 10,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 6,526 h, spindle motor power: 18,500 W, spindle nose: BT 40, number of spindles: 1, number of slots in tool magazine: 210, Equipment: chip conveyor, documentation/manual, MITSUI SEIKI precision machining center with very few spindle hours, as it was only put into operation in 2017. Matrix magazine with 201 positions. High-pressure coolant system KNOLL 200/1400. Scraper conveyor chip removal system Knoll 450K-1/290. Fanuc 16iMA. Nlsdpfoz R Rcbjx Ag Ioh Can be inspected while powered on.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080100, CNC Horizontal 5-Axis Twin-Spindle Machining Center Njds Aarpxopfx Ag Ijlh Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of Manufacture: 2011 Machine Number: 2080100 Control System: CNC Siemens 840SL Number of Axes: 5 Number of Spindles: 2 Dual Table System Travel in X/Y/Z: 600 / 600 / 510 mm Spindle Speed: up to 17,500 rpm Rapid Traverse: up to 45 m/min Tool Interface: HSK-A63 Machine Weight: approx. 16,000 kg Equipment: Standard accessories High-performance CNC horizontal machining center with twin spindle and dual table system for precise and cost-effective series production. Location: Maribor, Slovenia Availability: Immediately available Inspection possible by arrangement.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2080082, Used CNC horizontal machining center, 5-axis, with dual spindle and dual table Technical data – SW BAW06-22 Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Model: BAW06-22 Year of manufacture: 2010 Machine number: 2080082 Control system: CNC Design: Horizontal Number of axes: 5 Number of spindles: 2 Number of work tables: 2 Nlsdpfj Aarpfox Ag Ish Travel in X-axis: 600 mm Travel in Y-axis: 600 mm Travel in Z-axis: 510 mm Maximum spindle speed: 17,500 rpm Rapid traverse rate: up to 45 m/min Tool holder: HSK-A63 Machine weight: approx. 16,000 kg Accessories: Standard accessories Availability: Available immediately Machine description Used CNC horizontal machining center SW BAW06-22 with 5-axis machining, two work spindles, and a dual table system. The dual-spindle design allows two workpieces to be machined in parallel. The high spindle speed of up to 17,500 rpm enables productive and precise machining. Additional manufacturer data According to the technical data sheet from SW, the following values are specified for the BA W06-22 series: Spindle distance: 600 mm Spindle power: 2 × 35 kW Spindle torque: 2 × 80 Nm Tool magazine: 2 × 42 positions, optional larger Maximum tool length: 425 mm Maximum tool weight: 10 kg Control system according to manufacturer: Siemens SINUMERIK 840D sl Operating voltage: 400 V / 50 Hz

Condition: used, Year of construction: 2007, operating hours: 13,400 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 775 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 450 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 72 kVA, torque: 65 Nm, controller manufacturer: Indramat, controller model: MTC 200, total height: 3,000 mm, total length: 6,000 mm, total width: 5,500 mm, table width: 700 mm, table length: 1,100 mm, spindle speed (max.): 16,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 70 bar, distance between spindles: 450 mm, spindle motor power: 28,000 W, number of spindles: 2, number of slots in tool magazine: 100, mount diameter: 63 mm, tool length: 320 mm, tool diameter: 160 mm, tool weight: 8 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, This machine is offered for sale as part of a package that includes two other machines of the same type and with similar operating hours. Nodpfjzk U Hwex Ag Ielh The advertised price is for the purchase of all three machines, plus a large spare parts package (including two reconditioned spindles), as well as an additional, fourth machine, which the buyer will receive free of charge. The machines can be inspected under power at any time by appointment.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 81362, travel distance X-axis: 305 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 330 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller model: Fanuc 18i-MB, total height: 2,200 mm, total length: 3,300 mm, total width: 2,000 mm, table width: 250 mm, table length: 250 mm, overall weight: 4,600 kg, spindle speed (max.): 15,000 rpm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Kitamura Mycenter HX250iF, year 2011 Serial number: 81362 *Main spindle bearings replaced 07/2026 Nlsdpoxur E Sefx Ag Ioh - CNC control unit: Fanuc 18i-MB - Spindle power: 11.2 [kW] - Spindle speed: 15000 [rpm] - Travels in X/Y/Z axes: 305 / 305 / 330 [mm] - Rapid traverse (X/Y/Z): 48 [m/min] - Number of tool positions: 40 - Tool holder type: BT30 - Tool change time: 1.2 [s] - Pallet size: 250 x 250 [mm] - Number of pallets: 2 - Maximum weight per pallet: 110 [kg] - Distance center of table/top of spindle: 380 [mm] - Machine dimensions: 3,300 x 2,030 × 2,300 [mm] - Machine weight: 4,600 [kg] Equipment - Manual command - 3-color status light - Coolant tank with high-pressure pump - Oil mist extractor - Chip conveyor - Spindle cooling unit - Renishaw 3D probe - Renishaw tool measurement - Transformer - Approx. 150 tool holders

Condition: ready for operation (used), Year of construction: 1997, operating hours: 19,000 h, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 480 mm, controller manufacturer: MATSUURA, controller model: G-Tech 18i, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 80, number of axes: 3, This 3-axis Matsuura H.PLUS-300 was manufactured in 1997. It features a maximum spindle speed of 15,000 rpm and impressive travels of 500 mm in both the X and Y axes, with a Z-axis travel of 480 mm. The machine is equipped with an automatic tool changer that holds 80 tools and includes coolant in the spindle. If you are looking to get high-quality machining capabilities, consider the Matsuura H.PLUS-300 horizontal machining centre. Contact us for further details. • Through-spindle coolant • Tool setter Technical Specification Taper Size ISO 40 Nedpoz Tzrwsfx Ag Iolh

Condition: used, Year of construction: 2001, functionality: unexamined, machine/vehicle number: 81147, Origin: JP Dimensions: 290x180x220 cm Net machine weight: 4500 kg TECHNICAL SPECIFICATIONS Axis travels X-axis: 305 mm Y-axis: 305 mm Z-axis: 330 mm B-axis: continuous rotation 360°, indexing 0.001° Table and pallets Pallet dimensions: 254 × 254 mm Number of pallets: 2 Maximum load per pallet: up to 250 kg Spindle Spindle taper: BT40 / NST40 Maximum speed: 15,000 rpm Spindle power: approximately 7.5 to 12 kW Tool changer Magazine capacity: 40 tools Tool change time: approximately 1.7 seconds Chip-to-chip time: approximately 6.5 seconds Feed rates Rapid traverse X/Y/Z: up to 24 m/min Numerical control CNC YASNAC i80Mi or YASNAC 180Mi depending on configuration Dimensions and weight Main equipment Automatic pallet changer (APC) Integrated 4th axis 40-tool magazine Coolant system RS232 communication interface (depending on configuration) Nljdpfx Agez U Uy Re Ieh Subject to error or omission, the technical information is provided without guarantee.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Control: F31iA X mm: 560 Y mm: 560 Nljdpfx Agjz Riu Ue Ish Z mm: 630 B mm: 360.000 Table load capacity kg: 400 Cutting feed rate mm/min X, Y, Z: 50,000 Maximum rapid traverse rate m/min X, Y, Z: 50 Spindle speed rpm: 14,000 Spindle power kW: 18.5 Taper type: BT-40 Torque Nm: 120 Loader type: Pallet chain loader Positions in loader: 120 Maximum tool diameter: mm 70 Maximum tool diameter with adjacent positions empty mm: 140 Maximum tool length mm: 400 Maximum tool weight kg: 8 Coolant tank capacity liters: 500 Through-spindle coolant

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, feed length X-axis: 630 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, controller manufacturer: Fanuc, controller model: MSX-516, table width: 500 mm, table length: 500 mm, rotational speed (max.): 12,000 rpm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are offering this used MORI SEIKI SH-50 horizontal machining center, manufactured in 1996, for sale. Model designation: SH-50 Serial number: 450 Sale and collection: Sales are exclusively within the EU. Due to the high administrative effort and lack of experience with export processing, we cannot offer sales and deliveries to countries outside the EU. Collection, loading, packaging, and transport are the responsibility of the buyer and at their expense. Nedpfsyt Nnpox Ag Ielh The machine is still powered and available for immediate collection. • P8 power supply, with a value of 1500, was replaced in August 2024. • The spindle was repaired in 2017 and has since mainly been used for single-shift operation, as we primarily manufacture individual parts and small series. Therefore, the machine has mostly been used for setup work. • Machine: Mori Seiki SH50 milling machine • Control: Fanuc MSX-516 • Year of manufacture: 1996 • Design: Horizontal milling machine with indexing table • Tools: 60 (BT40) • Number of pallets: 2 (500mm*500mm) • Travel ranges: X630mm Y600mm Z650mm • Spindle speed: Milling spindle 12000 rpm • Chip conveyor Known defects: The rapid traverse speed of the X-axis has been reduced by 20% to extend the life of the telescopic covers. The sealing ring is likely damaged during pallet changes, resulting in oil leakage. We have temporarily resolved this by installing a ball valve in between; we only need to open this when we change pallets, which we do not do very often. The machine is sold as inspected, without any warranty or guarantee. Any liability for defects, including hidden defects, is excluded to the extent permitted by law. The magazine loses its reference point after being shut down for a longer period. The procedure for restoring it is known. If you have any questions or require further information, please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table width: 1,270 mm, table length: 1,400 mm, table load: 4,535 kg, overall weight: 20,800 kg, spindle speed (max.): 7,500 rpm, CNC Haas with 15-inch LCD screen Table size: 1400x1270 mm Maximum table load: 4,535 kg Spindle ISO 50, power 22.4 kW Maximum spindle speed: 7,500 rpm Travels: 1626x1270x813 mm 50-position tool changer Chip conveyor Nljdpfxsypv T Rs Ag Ish Weight: 20,800 kg

Condition: used, Year of construction: 1990, functionality: fully functional, weight 4 t X - Y + Z-axis each 410 mm kN control Fanuc Axis 4 Nlsdpfxjuu S R Uj Ag Ioh

Condition: used, Year of construction: 2003, functionality: fully functional, For sale: OKUMA MB-500H CNC Horizontal Machining Center Year of manufacture: 2003 Reliable and robust Japanese horizontal machining center equipped with an automatic 2-pallet changer, through-spindle coolant, and chip conveyor. The machine is in working condition and can be inspected under power at our facility in Croatia. TECHNICAL DATA Manufacturer: OKUMA Model: MB-500H Year: 2003 Machine type: CNC Horizontal Machining Center CNC control: OKUMA OSP WORKING AREA X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Distance from pallet surface to spindle center: 70 – 870 mm Distance from pallet center to spindle nose: 150 – 950 mm PALLET / TABLE Number of pallets: 2 Pallet size: 500 × 500 mm Maximum pallet load: 500 kg Pallet changer: Automatic rotary pallet changer (APC) Table indexing: 1° Pallet surface: 24 × M16 tapped holes The automatic 2-pallet system allows the next workpiece to be set up while the machine is running, significantly reducing non-productive setup time. SPINDLE Spindle speed: 50 – 15,000 rpm Spindle taper: SK40 / MAS 403 SK40 Spindle motor power: 26 kW / 18.5 kW continuous Spindle bearing diameter: Ø70 mm Through-spindle coolant (TSC) AUTOMATIC TOOL CHANGER Magazine capacity: 40 tools Tool holder: MAS SK40 Tool selection: Memory random Maximum tool diameter: Ø75 mm Maximum tool diameter without adjacent tools: Ø145 mm Maximum tool length: 350 mm Maximum tool weight: 8 kg FEED RATES Rapid traverse: up to 90 m/min Cutting feed rate: 1 – 60,000 mm/min EQUIPMENT Automatic 2-pallet changer (APC) 2 × 500 × 500 mm pallets Through-spindle coolant (TSC) Chip conveyor Automatic tool changer 40-tool magazine BT40 spindle Full machine enclosure Coolant system CONDITION The machine has been used in our own production and has been regularly maintained. Nlodpfjzxq Itex Ag Ijh Machine is fully operational and can be inspected under power. Location: Croatia Inspection and test run are possible by appointment. Additional photos, videos, and information are available on request. Loading/transport can be discussed separately. Price: on request / negotiable

Condition: used, Year of construction: 2001, Technical details: x-travel: 560 mm y-travel: 510 mm z-travel: 510 mm control: Fanuc 18i GOP 3 spindle speeds: 12000 1/min spindle drive: 22 kW rapid travel x/y/z: 42 mm/min Number of tool station: 40 BT 40 Pallet dimension: 2x 400x400 mm table load: 0,5 t working diameter: max. 580 mm total power requirement: 56 kVA weight of the machine ca.: 8,7 t dimensions of the machine ca.: 2,9x4,1 m Accerories Chip conveyor Coolant Gun Coolant shower Memory 125 Memory 320 m No. of tool offset pairs 64 offsets for parts 6 Macro B 82 var. Interface for coolant through the spindle spindle load monitor Program restart Coolant through Spindle 50 bar Knoll VRF unit Control Fanuc 18i M, 40 tool stations, trough spindle coolant Knoll 50 bar, 4th axis, Chipconveyor, twin pallet-changer tool magazine 40 BT 40 Nledpfx Aj Adtcnsg Ish *

Condition: good (used), Year of construction: 2004, functionality: limited functionality, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: Okuma, controller model: OSP-E100M, workpiece length (max.): 600 mm, workpiece width (max.): 710 mm, workpiece weight (max.): 400 kg, total height: 2,760 mm, total length: 4,535 mm, total width: 2,415 mm, table width: 400 mm, table length: 400 mm, table load: 400 kg, overall weight: 10,000 kg, spindle speed (max.): 8,000 rpm, distance table center to spindle nose: 710 mm, spindle motor power: 15,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, Okuma Space Center MA400HA Horizontal Machining Centre Machine Type: CNC Horizontal Machining Centre Year: 2004 Control: OSP-E100M Axes: 4 No. of Pallets: 2 Condition: Good - There is an issue with the pallet changer. Includes Cromar Swarf Conveyor Coolant Filtration System Technical Specifications Pallets: 2 Size of Pallets: 400 x 400mm X Axis Travel: 560mm Y Axis Travel: 610mm Z Axis Travel: 625mm B Axis Travel: 360 Deg Rapid Traverse: 60m/min Spindle Centre to Pallet Top: 50 - 660mm Spindle Nose to Pallet Centre: 85 - 710mm Max Pallet Load: 400kg Nodewcd Evspfx Ag Ijlh Max Workpiece Dimensions: 600 x 710mm Tool Pockets: 40 Spindle Taper: BT40 Spindle Power: 15kW Spindle Speed: 8,000rpm Machine Dimensions: 4535 x 2415 x 2760mm Machine Weight: 10,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2008, machine/vehicle number: 1160821, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Machine No.: 166 0821 Year of manufacture: 2008 Used, ready for operation Travel axes: X-axis 600 mm Y-axis (alternate position) 600 (975) mm Z-axis 500 mm Control: Siemens 840D control, side-mounted Feed / rapid traverse speed: X, Y, Z 1 – 45,000 mm/min Max. feed force X, Y, Z 15,000 N Average acceleration: X, Y, Z 2.5 m/s² Measuring system: Absolute linear measuring system X, Y, Z Nsdoy Ah Rcspfx Ag Islh Spindles: Spindle speed (stepless) 20-10,000 rpm Torque 2 x 363 Nm (S6/40%ED) Power 2 x 38 kW (S6/40%ED) HSK-A 100, horizontally arranged side by side Spindle center distance 600 mm Spindle bearing diameter 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing-arm carrier with straight-toothed gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec Partition wall between machining and loading area Tool magazine: 2 x 40 tool HSK-A 100 chain magazines, position-coded Automatic pickup Tool change time (chip-to-chip): 4.9 sec Max. tool diameter 100 mm 250 mm if adjacent pocket is empty Max. tool length 350 mm Max. tool weight 20 kg Equipment: Central lubrication Minimum quantity oil lubrication (spindle lubrication) Chip conveyor Connection for central coolant system Hydraulic system Service unit Water recooler Fully enclosed; crane loading possible Dimensions with paper band filter: approx. 5.15 x 8.50 x 4.20 m Weight approx. 20,000 kg Dimensions without paper band filter: approx. 5.15 x 6.60 x 4.20 m Other details: - Condition appropriate for its age - Annual maintenance was regularly performed by the previous owner --- Machine is sold without clamping devices --- --- without foundation parts --- Immediately available, timing by arrangement EXW 72793 Pfullingen Dismantled into main components Transport to site by the customer/buyer! Dimensions/transport dimensions of main machine components: 1 pc. machine unit (X, Y, Z) mm 3800 x 3350 x 3400 approx. 13,000 kg 1 pc. table unit mm 4400 x 2400 x 3400 approx. 10,000 kg Additionally, peripheral equipment such as chip conveyor, small parts, sheet metal, etc. Short delivery time possible! Schedule by arrangement.

Condition: used, Year of construction: 2005, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, workpiece weight (max.): 400 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, documentation/manual, Mitsui Seiki HU40A (2005) is a high-precision horizontal machining center: Nsdpfx Agswwrw No Islh * axis travel: 560 × 560 × 560 mm, * spindle: 12,000 rpm, power 11–15 kW, BT40 taper, * tool magazine with 60–220 positions, * new FANUC CNC systems, * large workspace and cooling system, * chip conveyor.

Condition: used, Year of construction: 1999, Technical details: x-travel: 560 mm y-travel: 510 mm z-travel: 510 mm control: Fanuc 18i M power capacity - milling spindle: 22 / 18,5 kW spindle turning speed - stepless: 12.000 1/min numbers of tools in magazin: 60 BT 40 size of pallet: 2x 400 x 400 mm max. workpiece diameter on pallets: 580 mm workpiece height max.: 650 mm feeds x/y/z -stepless: 16.000 mm/min rapid travel x/y/z: 32.000 mm/min total power requirement: 54 kVA weight of the machine ca.: 8,7 t dimensions of the machine ca.: 2,9 x 3,9 x 2,6 m Accerories Chip conveyor Coolant through Spindle 50 bar Knoll VRF unit Horizontal twin - pallet machining center with full 4th axis, 60-tool magazine BT 40 and 50 bar coolant through spindle. Nedpfx Agj Adth Ro Islh *

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080092, Used CNC horizontal 5-axis twin-spindle double-table machining center Njdpsz E Ddfjfx Ag Islh Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of manufacture: 2011 Machine No.: 2080092 Weight: approx. 16,000 kg Technical data: - CNC horizontal machining center - 5-axis design - Twin spindle - Double table - Travel ranges: - X-axis: 600 mm - Y-axis: 600 mm - Z-axis: 510 mm - Rapid traverse: up to 45 m/min - Tool interface: HSK-A63 - Spindle speed: up to 17,500 rpm Equipment: Machine with standard accessories. Availability: Available in the short term.

Condition: used, Year of construction: 2008, travel distance X-axis: 500 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 210, Horizontal Machining Center Manufacturer: MATSUURA Model: H.PLUS 300 Year of manufacture: 2008 Control: Matsuura G-Tech 30i Nljdpfx Aeyigalog Ijh Technical data: Travel ranges: - X-axis travel: 500 mm - Y-axis travel: 560 mm - Z-axis travel: 500 mm Main spindle: - Max. speed: 20,000 rpm - Number of tool positions: 210 - Total power requirement: 52 kW Equipment & accessories: - 5-station pallet changer - New spindle (including ceramic ball bearings) - New spindle chiller In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.