Used saws (window production) for sale (130)

Year of construction: 2025, condition: new, XZ100228 Single head sawing machine Ø 400 mm for aluminium and PVC with manual blade down-feed and pneumatic vices FOM INDUSTIRE SIKA PLUS M Machine in stock Configuration: - Aluminium and PVC cutting machine with CE certification - Tungsten carbide saw blade Ø 400 mm - Manual blade lowering (with lever) with pneumatic servo control to reduce operator stress - Side support plates on both sides - Blade motor power 2.2 kW - 2850 rpm - Self-braking motor with blade stop in less than 10 sec - Cutting angle from 45°Lh to 45°Rh on vertical axis and 45°Rh to 90° on horizontal axis - Intermediate angles with mechanical stop - Cylinder blocking involuntary head lowering - Double working pressure servo-controlled in low pressure - 1 pneumatic vertical vice - 2 pneumatic horizontal vices - 1 safety servo-valve for each pneumatic horizontal vice - Conical anti-crushing buffers - Worktable and turntable structure in stabilized cast iron - Motor transmission by belt - Saw blade holding spindle Ø 32 mm - Spray mist blade lubrication system Nkodpspl Tgmsfx Ad Njt - Integral blade guard in rest position - Set up for the extraction of chips and fumes

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Excellent technical condition of machine. Nsdpfjwltqasx Ad Nokt

Condition: used, Automatic feed via Diethei PD 100 control For attachment on the right Nkodpfxovuruks Ad Njt Max. insertion length: 2000 mm Good condition

Condition: as good as new (ex-display), Year of construction: 2018, saw blade diameter: 550,500 mm, Machine in perfect technical condition. Practically very little used. For processing aluminum and PVC profiles. Mitres possible in 3 levels and can be used as a splitting saw, manual adjustment of the horizontal saw blade by a maximum of 20 mm in front of the vertical saw blade. Nsdpevtarnefx Ad Njkt Notch options: rectangular, one-sided diagonal, two-sided diagonal, three-sided diagonal. Processing of profiles up to 300, width up to 90 °, bevels up to 30 °. Notch depth horizontally up to 185 mm, vertically up to 210 mm at an angle of 90 °. Notch width at 90 °: 300 mm, profile height 280 mm Manual adjustment of the notch and height, positioning using mechanical digital displays. Vertical saw blade rotation range 30° – 90° – 30°, (front/middle/back) manual, positioning via digital display. Vertical saw blade rotation range 30° – 90° – 30°, manual, positioning via digital display. The material stop (table top) can be manually rotated left and right within the range of 30° - 90° - 30°, positioning via measuring scale. The material depth stop can be manually adjusted via the sliding carriage and manual clamp, positioning via digital display.

Year of construction: 1996, condition: not inspected (used), functionality: unexamined, FOM double-head saw for aluminum, plastic, and wood - one head electic drive - saw diameter 400mm - total length 4800mm - maximum saw approximately 4000mm The machine worked until the end. After unplugging, it was tested and working. It may require minor repairs (air leaks). You can inspect it on-site at our company in Poland. Nksdpfx Aeycv Nxsd Nst We can send a video of the machine in operation. We can assist with transport.

Year of construction: 2002, condition: used, Max. cutting length: 3000 mm Max. saw blade diameter: 380 mm Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimum quantity spray device Pneumatic material clamps Miter cuts possible on both sides Nedjyabzuspfx Ad Nokt 2-Hand-Bedienung

Year of construction: 2001, condition: like new (used), functionality: fully functional, machine/vehicle number: 694-6367, For sale is a SCHÜCO KSM 235 clipping machine, year 2001, article no. 296757, S/N 694-6367, 230 V, approx. 150 kg, roller conveyor approx. 200 cm. The machine can be inspected at our company premises and, if desired, also tested. Njdpfx Adsycqq Dj Nskt

Year of construction: 2017, condition: good (used), Assembly table for all assembly work on windows and doors. The movable and extendable work surfaces allow for absolutely safe handling of frames in all sizes as well as very large structures. Nedjycknpspfx Ad Nskt Height-adjustable feet The height-adjustable feet ensure precise adjustment of the working surface to the desired height and perfect alignment. In addition, the table can be fixed to the floor using the pre-drilled holes. The work surfaces are covered with soft, non-slip PVC, which allows frames to rest securely. A storage shelf enables easy and organized storage of small parts for quick access and clear arrangement of tools and components. Quick-connect couplings provide easy supply of compressed air. Adaptation to any frame size is ensured by both the horizontally movable support plates and the roll-mounted, extendable support plate, allowing for a highly flexible enlargement of the working area.

Condition: good (used), saw blade diameter: 360 mm, Sliding saw / Mitre saw / Chop saw / Radial saw Wegoma zs 135 Mitre saw type ZS135 -Motor power: 2.2 kW Nksdpfxjyckbie Ad Nst -Saw blade: Ø 360 mm, swiveling

Condition: excellent (used), functionality: fully functional, Pantograph with 2 controlled axes, ideal for machining aluminum, PVC, and steel profiles up to 2 mm, with the option to process stainless steel (optional). The work cycle is managed through intuitive software that guides the operator with simple instructions on the touchscreen display. The USB connection allows for easy linking to a PC. The four-sided rotating worktable ensures very high precision by using shorter tools, thus avoiding through machining and the resulting issues of vibration and noise. It is equipped with a quick tool change system with ISO 30 taper. A retractable, pneumatically operated guard protects the operator during machining. Nodpfxsx U Dg Dj Ad Njkt

Year of construction: 2014, condition: like new (used), functionality: fully functional, Double mitre saw with 5 NC axes suitable for aluminium and light metal alloys, featuring automatic movable head adjustment and electronic control of all angles from 22°30' (internal) to 45° (external), with a fine-resolution of 280 positions per degree. The 600 mm saw blades offer two different feed modes. The standard feed optimises the cutting chart vertically for profiles taller than 450 mm. The radial mode utilises an extended stroke beyond the vertical reference plate, producing a large cutting chart horizontally for profiles up to 240 mm wide. Accessories: - Pro software package: Overlength / Shortcut / Cross-cut / Wedge cut - Pneumatic profile supports - Data import from external software (LogiKal / Schücal / MAP / TXT / Excel, etc.) - Additional clamps - Additional material support - Short part clamp for automatic and semi-automatic cutting - Additional clamp on roller conveyor - Motorised feed Nksdpoycht Nsfx Ad Njt - Safety hood with adjustable opening width for improved noise and dust protection The saw has extremely low operating hours and cutting cycles! It is in excellent condition. Only 13,000 cuts and 900 operating hours! Twin-head cutting-off machine with 5 NC axes for aluminium and lightweight alloys, with automatic mobile head movement and electronic management of all angles from 22°30’ (internal) to 45° (external) with a resolution of 280 positions per degree. The 600 mm saw blades have two distinct feed modes. Standard feed optimises the cutting chart in the vertical direction for cutting profiles over 450 mm in height. The radial mode utilises a large stroke beyond the vertical reference plate, generating a large cutting diagram horizontally for profiles up to 240 mm wide.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, cutting length (max.): 10,000 mm, feed length X-axis: 5,000 mm, saw blade diameter: 500 mm, air pressure: 6 bar, Emmegi Classic Magic 500 5 Meter Electronic double mitre saw with automatic feed of the movable cutting head, driven by a brushless motor with numerical control system. Pneumatic control of the angle adjustment in three fixed positions: 90°, 45°, and 22°30' (external), or via a mechanical system for manual adjustment of intermediate angles. Hydro-pneumatic feed of the saw blades. Swivelling heads: the rotation of the heads around the horizontal axis is performed by pneumatic cylinders, with adjustable angles ranging from 90° to 22°30' (external). Intermediate angles are set using special manually adjustable stops. The mobile units are equipped with integrated pneumatic drop-down safety devices for the working area. Pneumatic intermediate support The pneumatic intermediate support is particularly useful when cutting lightweight profiles of considerable length. In such cases, the pneumatic support automatically provides ideal support for the profile. Additional clamp for profile support on roller conveyors After each cut, the remaining short profile section tends to fall onto the roller track, posing the risk of coming into contact with the saw blade edge while the cutting phase is ongoing. This movement can potentially damage both the workpiece itself and the freshly cut section. The additional vise installed on the roller conveyor prevents this issue by securely holding the profile throughout the entire cutting operation. Year of manufacture: 2019, as new! The saw has barely been used and protective film is still present on the printer and scales! As the saw unfortunately does not have a cut counter, it is not possible to state exactly how many cuts have been made. However, it is immediately apparent upon inspection that the saw is virtually as new and has seen very little use. It was used by the previous owner solely for training purposes! LCD display with backlighting Prepared for connection of an industrial label printer USB port Single-cut operation Storage for 99 profile correction values and automatic calculation of cut length for mitre cuts Storage for 20 cutting lists entered via keyboard (50 sets each) Storage for 10 cutting lists (100 sets each) imported from an external PC via RS232 serial interface MACHINE FEATURES Position detection of the movable unit via direct measuring system with magnetic tape 2 carbide-tipped saw blades, 500 mm diameter Pneumatic full safety covers over the cutting area 2 pneumatic horizontal clamping devices with low-pressure safety system Profile support roller conveyor Lubrication system: mist spray device or minimum quantity spraying device Cuts with saw blades Ø 500 mm in mitre range from 22°30' (external) to 90° Manual profile support Prepared for automatic start of chip extraction system MG4 Two standard profile inserts Nkjdpfxew Svxlj Ad Not Metric scale Label printer incl. peel-off function Long cut Shortcut Cross cut Macro Automatic cut Software package pro

Year of construction: 2014, condition: used, functionality: fully functional, Mobile chip extractor MG4, sound-insulated and equipped with automatic start. Features an antistatic filter, suitable for extracting aluminum, PVC, and steel chips. Automatic filter cleaning and easy chip container emptying thanks to castors. Nksdpfx Adjycgtbj Njt The VP version is fitted with a control unit featuring a potential-free contact for external activation by the connected machine. The front extraction system comprises two cast aluminium suction ports, each with a 100 mm diameter. These allow for multiple connections via plastic hoses with metal reinforcement to dust extraction devices mounted on cutting machines, sawing centers, machining centers, and PVC machinery. Accessories include adapters reducing to 70 mm, a Y-connector, and approximately 14 meters of extraction hose. (Perfectly set up for use with an Emmegi double mitre saw)

Year of construction: 1991, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm Nsdpfsmydmbjx Ad Nskt -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Condition: used, Facade saw GRAULE type AS-U-450 Nkedpfx Aepl T Rpsd Net blade 450 mm electronic angle display

Condition: used, Double-head cutting saw with 3 controlled axes, featuring automatic movement of the movable head and electronic management of all cutting angles from 45° (internal) to 15° (external). Blade feed is driven by a pair of oil-pneumatic cylinders. MAIN FEATURES *Electronic control of X axis *Standard X-axis positioning speed (m/min): 25 *Movable head position detection via direct measuring system with absolute magnetic strip *Cutting unit tilt detection via direct measuring system with absolute magnetic strip *Electronic control of intermediate angles *Max internal angle: 45° *Max external angle: 15° *Oil-pneumatic blade feed *Useful cutting length (mm): 5,000 *Carbide blades: 2 *Max blade diameter (mm): 550 *Blade motor power (kW): 2.64 *ELECTRONIC PROFILE THICKNESS MEASURING DEVICE *LABEL PRINTER *Front local safety guard with pneumatic operation *Minimal oil diffusion lubrication system *Prepared for automatic start of external dust extractor *Pair of horizontal pneumatic clamps with “low pressure” device *Pair of horizontal clamps with vertical clamping system *Mechanical intermediate profile support *Roller table on movable head with mechanical profile supports in assisted mode Nkedpfx Aoyaqu Rjd Not *Weight: 1,480 kg

Year of construction: 2022, condition: like new (used), Circular Saw OMRM 105 Technical Specifications: • Automatic cutting of PVC profiles for glazing beads at 45° • 4 cutting saw blades • Vertical pneumatic clamping system • Adjustment handle for easy mould adaptation • Double cutting of glazing bead at 45° in one single operation Njdpfx Asw D Dq Uod Nekt • Adjustable cutting speed via regulator on the control panel • Standard equipment includes feeding and measuring conveyors (2.5 m + 2.4 m)

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, ZAX12372 Single-head saw machine with pneumatic tilting of the heads • Head tilt up to 22.5° right / left (Automatic positioning at fixed angles 22.5° - 45° - 90°) • Head tilt at intermediate degrees, with manual positioning (mechanical stop) • Full guarding • Three-phase motor 400V 50Hz 4kW (inverter-driven) • Saw blade rotation speed 1900 rpm • Provision for chip and fume extraction • Simultaneous start of the vacuum with the start of the saw blade • Saw cut lubrication by spray mist • Widia saw blade Ø 700 mm • 2 pneumatic horizontal clamps • 2 pneumatic vertical clamps • Set of service tools Nkodpfeya H Dzox Ad Not -> optional FOM length stop

Condition: excellent (used), Year of construction: 2012, Double head saw for aluminim or PVC profiles PERTICI UNIVER 400IP, year 2012 Condition: excellent Nkodpfxehqb T Hj Ad Njt - Two Ø400 mm tungsten carbide saw blades - Spray mist blade lubrication system - Maximum cut between the two heads: 3500 mm - Minimum cutting capacity between two heads at 90°: 580 mm - Minimum cutting capacity between two heads at 45°: 580 mm - Hydro-pneumatic feeding of saw blades - Two horizontal pneumatic vices - Two vertical pneumatic vices - Two intermidiate profile support

Year of construction: 2022, condition: like new (used), functionality: fully functional, For sale: Emmegi Five 300CS glazing and inspection press, ideal for precise glazing and final inspection of window and frame elements. The machine features a self-centering clamping system and robust, scratch-resistant contact surfaces. Reliable technology, user-friendly operation, and compact design. Technical specifications: - Contact surfaces coated with hard, scratch-resistant PVC - Adjustable working surface height: 875–925 mm - Working surface tilt: 0° (horizontal) to 85° - Adjustable clamping force (max.): 660 N - Clamping device opening: 425–2,425 mm - Clamping jaw height (max.): 65 mm Nksdpex U Daqjfx Ad Not - Clamping device with 2 beams, each with 5 adjustable jaws - Beam height: H = 2,060 mm - Self-centering clamping system with retractable clamping beams - Pneumatic tilting of the roller conveyor in horizontal position - Infeed/outfeed roller conveyor, floor height adjustable: 305–355 mm - Machine length: 3,000 mm - Air consumption: 150 Nl/cycle - Maximum load capacity: 200 kg - Machine weight: 330 kg

Condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 Nedpfem Hd Sfsx Ad Nskt -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) - Cutting height 55 mm (max. ca. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 1000/840/H1240 mm -Weight: 162 kg

Condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, circular table saw, circular saw -Manufacturer: White Paisley, table saw on solid base -Motor power: 6.3 kW / 1430 rpm Nedoi I Hc Uopfx Ad Nekt -Saw blade: Ø 550 mm -Max. Cutting height 180 mm -Cutting width: up to 455 mm -Table height: 850 to 1000 mm -Chip extraction: Extraction system can be supplied at an additional cost -Dimensions 1240/1100/H1500 mm -Weight: 762 kg

Year of construction: 1992, condition: good (used), Aluminum circular saw, chop saw, glazing bead saw, aluminum saw,machine Nkjdpfx Adsif Azfo Net -Manufacturer: Alfred E.Gohl, glass bead saw type GLS -Saw blade: Ø 225x2.0x32 mm -Drive: 1.1 kW -Speed: 3000 rpm -Dimensions: 1100/650/H1350 mm -Weight: 152 kg

Year of construction: 1980, condition: good (used), Underfloor circular saw, cross-cut saw, pull saw, chop saw, sliding table saw, table saw, circular saw -Transfer: in the current state as viewed -Table extension: do-it-yourself -Manufacturer: Ulmia, circular saw type 1612SP -Motor power: 2.2 kW / 2800 U/min Nkedpfxef D H Hbe Ad Nst -saw blade: Ø 280 mm -max. cutting height 70 mm -Miter cut: up to 45 ° -Length stop: up to approx. 800 mm -Dimensions 1000/1340/H980 mm -Weight: 306 kg

Condition: used, Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° pivotable Nsdpfx Adem Sk H Is Nekt -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 175 mm, (max. Ø 300 mm) -Cutting height 37 mm with saw blade Ø 175 mm (max. ca. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 940/860/H1390 mm -Weight: 162 kg