Used Ath 1200 for sale (8,282)

Condition: used, Year of construction: 2000, machine/vehicle number: 990101, total length: 6,400 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 18,500 kg, Heavy Duty Lathe Seiger SLZ 1200 x 3000with Siemens Sinumerik 810D Cycle Control (Teach-In)The heavy duty lathe Seiger SLZ 1200 x 3000 is equipped with a Siemens Sinumerik 810D cycle control (Teach-In). The machine was most recently used as a faceplate and frontal lathe and therefore operated without a tailstock and without steady rests. However, the machine can still be structurally equipped with appropriate steady rests or a tailstock and used for classic center work.Configuration with AC main drive, large faceplate, hydraulic unit, separate control cabinet, and 2 chip conveyors.Working AreaDistance between centers: 3,000 mmSwing diameter over bed: 1,200 mmSwing diameter over cross slide: 850 mmCross slide travel: 620 mmBed width: 750 mmSpindleSpindl e nose: DIN 55027 size 11Spindle diameter front bearing: 190 mmSpindle bore: 104 mmSpeed range: 5 – 900 min⁻¹Max. torque: 6,000 NmMain DriveDrive power: 37 / 52 kW (100% / 60% duty cycle)FeedX-axi s feed force: 24,000 NZ-axis feed force: 16,000 NRapid traverse X: 7 m/minRapid traverse Z: 4 m/minTool HolderTurning tool cross-section: 40 × 40 mmElectrical DataSupply voltage: 400 VFrequency: 50 HzMax. current consumption: 200 AWorkpiece Weights(Manufacturer specifications for standard configuration)Between centers without steady rest: 5,000 kgBetween centers with 1 steady rest: 6,000 kgBetween centers with 2 steady rests: 7,000 kgFlying in faceplate: 1,800 kgChip Conveyor2 x AME Chip ConveyorsManufacturer: AME GmbH, EmsdettenType: S8 300 Tlg. 63Year of manufacture: 05/2016Not Included:TailstockSteady restsNoteThe machine was most recently used as a faceplate or frontal lathe. Therefore, neither a tailstock nor steady rests are currently available. The machine is particularly suitable for machining large disc, ring, and flange workpieces. A later retrofit for use between centers is fundamentally possible. Turning diameter max.: 850 mm Control: • Siemens Sinumerik 810D Weight approx.: 18,500 kg Dimensions (LxWxH) approx.: 6400 x 2200 x 2300 mm Serial number: 990101 Tip width: 3000 - mm Year of construction: 2,000 Iijdpfx Aqszdd E Reuoc Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: used, This listing is for the Heathrow Scientific HS120000 Electronic Counter. The unit is in full working condition and ready for immediate use. Designed for precise and efficient counting applications, it features a clear digital display and user-friendly interface, making it ideal for laboratory and industrial environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Iiedoyyb Ehepfx Aquoc • Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2023, condition: used, 1 unit of ATH-HEINL COMFORT LIFT 2.35XL, 2-column lift Load capacity: 3500 kg, power: 3.0 kW, self-disassembly Color: as shown in the pictures, see pictures and inspection Year of manufacture: 2023 Condition: used Iodpfezcl E Ajx Aqusic Location of goods: Hall 1 Payment method: prepayment by bank transfer Shipping: self-collection only from the location in Hofgeismar

Year of construction: 2024, condition: used, 1 unit of a double-scissor lift, ATH-HEINL FRAME LIFT 30FZ Load capacity: 3000 kg, power: 2.6 kW, self-dismantling Ijdpfxszcl A Ij Aqusic Color: as shown in the pictures, in accordance with the images and inspection Year of manufacture: 2024 Condition: used Location of goods: Hall 1 Payment method: prepayment by bank transfer Shipping: Self-collection only at the Hofgeismar location

Condition: new, Year of construction: 2025, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg Load Capacity Welding Positioner, CE Certificate Load capacity horizontal: 1200 kg Load capacity tilted: 1200 kg with a load center at 250 mm Very robust Continuously adjustable speed from 0.05 to 0.7 rpm (higher speeds available at extra conversion cost) Iijdoxq S Nispfx Aqujc Turntable diameter: 1200 mm Tilting up to 120° Height horizontal: 1,050 mm, tilted up to center: 880 mm Hand and foot remote control Dimensions: 1.35 m (length) x 1.2 m (width) Chuck or quick-change chuck available for extra charge, depending on size As shown, diameter 1000 mm, price: €2,900 (special price, only available when purchased with the welding positioner) Counter bearing with steps: €480, counter bearing with screw adjustment: €880; load capacity 4000 kg

Condition: good (used), The scope of delivery includes: Iiedpelucaqjfx Aqusc 01x back wall grille, used material color: similar beige total width: approx. 1.200 mm total height: approx. 1.100 mm Mesh size (outside): approx. 93 x 53 mm Mesh width (inside): approx. 88 x 48 mm Frame profile dim.: L-profile 30 x 30 mm The back wall grids are rusty, partly the frame profile is damaged, see pictures.

Condition: used, Professional granite surface plate – renowned quality by Mitutoyo / Planolith (Made in Germany). Ideal for use in quality control, tool shops, and metrology. ⸻ Specifications: • Plate dimensions: approx. 1200 x 800 mm • Thickness: approx. 170 mm • Weight: approx. 460 kg • Accuracy class: DIN 876/0 (high precision) • Permissible deviation: 0.009 mm • Actual deviation: 0.00273 mm • Manufacturer: Planolith GmbH / Mitutoyo • Country of manufacture: Germany • Includes: solid steel stand ⸻ Advantages: Very high measurement accuracy Stable construction – heavy granite dampens vibrations Ideal for measurements, marking out, and component inspection Professional equipment Isdoyw Ubqjpfx Aqueic Ready for use ⸻ Condition: Used item – shows normal signs of wear (scratches visible on the surface), but is fully functional and maintains its specification parameters.

Condition: good (used), Perfecta BSH5-1200 Paper Stack Lifter The device is in perfect condition. Hydraulic drive, state-of-the-art hydraulic unit. Iiodpfx Aqjy Tu Eusujc 400V power supply. Automatic and manual lifting cycles, fast operation. Load capacity: 1200 kg. Pallet/sheet dimensions: 990 x 1350 mm. Documentation included.

Condition: ready for operation (used), Brand: HERAEUS Maximum temperature: 1200 °C Iiedpfx Aqoy Nlfdeujc Internal furnace dimensions: 390 x 200 mm, depth: 650 mm

Condition: defective spare-parts repository (used), functionality: limited functionality, Dear Sir or Madam, We hereby offer you the following device for sale: Keyence XM-1200 coordinate measuring machine. The device is defective and currently not operational. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. Iedpfx Aqoyrcx Ssueic This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 13 May 2026. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: excellent (used), CATALOG NUMBER 6901 TECHNICAL DATA - max turning length: 1200 mm - max turning diameter: 210 mm - max turning diameter with standard steady rest: 90 mm - max dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copy attachments - additional 3 tools on hydraulic pistons (2 pieces installed) - 4 spindle speeds - automatic or manual machine operation - spindle motor power: 9 kW - hydraulic pump motor power: 3 kW - extraction nozzle diameter: 90 mm - transport dimensions (L/W/H): 3700x2100x2000 mm Iijdpjyy Ngmefx Aqujc - weight: approx. 3000 kg ADVANTAGES – Italian production – automatic hydraulic copy attachment – original technical documentation (DTR) – not repainted – used lathe, in very good condition Net price: 63,900 PLN Net price: 15,200 EUR Net price calculated at the rate 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: used, Plant: Used membrane filter press Type: Passavant Noggerath Application area: Sludge dewatering Iodpfx Aqjwy H Nrsusic Design: Sidebar frame Filter plate size: 1200x1200 Number of plates: 100 units / membrane-mix Filter plates: PP Filter cloths: optionally available, tailored to the medium Press volume: approx. 2900 dm3 Filter pressure: approx. 15 bar Pump technology: optional Purchase or rental: Inspection of the plant possible by appointment at our facility.

Year of construction: 1970, condition: used, Cut Tape BRENTA torso 1200 Location Isdpscudizsfx Aquoic Gorzow Wielkopolski. Conditions of delivery Cost of delivery Client cover startup type negotiated Description Comments Vertical band saw blade stylitowane carbide wheel diameter 1200 mm, adjustable mechanical feed, feed regulation smoothly on the tape and the wheels flat, cast iron, no need to anchor. Important machine has the ability to cut diameters up to 330 mm, new electrics, a complete ready to go, belt width 200 mm stylit, after pouring rubber on the wheels do not need to regenerate.

Year of construction: 2023, condition: as good as new (ex-display), EXHIBIT DEVICE. High quality and robust short stroke lift with hydraulic drive, almost maintenance free. Powerful hydraulic unit (230V / C16A) Very low drive-over height of only approx. 105 mm No electrical limit switches installed in the scissors, protective hose over the hydraulic hoses Ijdpfx Ajn Armwoqueic Mechanical synchronization due to bottom cross connection and double hydraulic lowering lock (no safety catch or compressed air required) High lifting force already from zero point Emergency lowering system for lowering in case of power failure Ideally suited for paint and body stores, repairs, brake and tire services Color anthracite gray Lifting capacity 3 t Lifting height 960 mm Drive-up height 105 mm Length of rails 1.450 - 2.040 mm Rail width 530 mm Drive power 2.2 kW Lifting/lowering time approx. 20 s Operating voltage 230V / C16A Foundation min. C20/25 2,500 x 2,500 x 180 mm Can be inspected and tested by appointment.

Year of construction: 2023, condition: as good as new (ex-display), Pneumatically controlled, without electrical components Tool holder for storing impact wrenches and sockets Catch hook to secure the wheels against falling down Lockable castors for locking the wheel holder Load capacity 65 kg Lifting height 1,2 m Min. height of the room 2,8 m Iiodpfx Aon Atm Iequec

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: YS-2674, turning height: 1,250 mm, workpiece weight (max.): 5,000 kg, turning diameter: 1,600 mm, faceplate diameter: 1,250 mm, controller model: Fanuc 0i-TD, TECHNICAL DETAILS Faceplate diameter: 1,250 mm Max. torque on faceplate: 12,500 Nm Turning height: 1,250 mm Max. turning diameter: 1,600 mm Max. workpiece weight: 5,000 kg Table speed: 2 - 300 rpm Travel range X-axis: 1,475 mm Travel range Z-axis: 900 mm Rapid traverse: 10 m/min Spindle taper: ISO BT50 Number of tool positions: 12 MACHINE DETAILS Control system: Fanuc 0i-TD Total power: 75 kW Dimensions & Weight Iiedpfx Aozb Uy Toqusc Footprint: approx. 4.7 x 5.8 x 5.5 m Machine weight: approx. 32 t EQUIPMENT Tool changer magazine for 12 turning tools with BT 50 shank Note: The €5,000 for dismantling and loading applies to the preparation for EU transport. Preparation for sea transport is possible; costs upon request.

Condition: not inspected (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: 71267, total width: 500 mm, total length: 500 mm, total height: 500 mm, overall weight: 20 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Measuring volume: 1,200 mm Accuracy: 0.015 mm MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): approx. 500 x 500 x 500 mm Weight approx.: 20 kg EQUIPMENT Laptop and software (completeness not guaranteed) Ijdpfx Aszb A Dtoqueic Transport case Note: The red base frame on which the laptop is placed is not included in the offer.

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 13,300 h, load capacity: 16,000 kg, lifting height: 5,000 mm, free lift: 2,500 mm, fuel type: diesel, mast type: duplex, construction height: 4,185 mm, power: 157 kW (213.46 HP), fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,500 kg, total length: 5,470 mm, drive type: Diesel, construction width: 2,530 mm, Heavy-duty forklift - diesel Load center: 1200 ISO class: Terminal West Mast type: Duplex Iisdpfx Aqszd H T Aeuec Transmission: Clark 13.7HR28316 Condition: Operational and fully functional Technical condition: good Front tire size: 12.00-20 Rear tire size: 12.00-20 Sideshift, fork positioner,

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,500 kg, Accessories Condition: New Ijdpfx Aqozd H Nqeuoic Technical Condition: New Description: Manitou 180° Swivel Fork Carrier – More flexibility on every construction site. Welcome to today's product highlight: the Manitou 180° Swivel Fork Carrier. This intelligent attachment significantly expands the application possibilities of your Manitou telehandler and ensures maximum efficiency in handling pallets and long materials. The swivel fork carrier enables a 90-degree rotation to the left and 90 degrees to the right. This allows loads to be positioned precisely without constantly having to realign the machine. This is especially beneficial on tight construction sites, between buildings, or in hard-to-reach areas, as it saves valuable time and increases safety. Whether it's sandwich panels, drywall, wood, or steel structures – long loads can be easily transported lengthwise and placed exactly where they are needed. Even pallets that are not optimally aligned can be easily corrected. Another advantage: positioning materials through window openings or narrow passages becomes significantly easier. The driver does not have to constantly move the machine but can align the load directly using the rotating function of the fork carrier. This saves travel distances, reduces fuel consumption, and increases productivity on the construction site. With a load capacity of up to 1,500 kilograms, the Manitou Swivel Fork Carrier is suitable for most daily material transport tasks on construction sites and in industrial applications. Typical applications include roofing and facade work with sandwich panels, drywall construction, wood and steel construction, and all applications where long or bulky loads need to be moved safely. The Manitou 180° Swivel Fork Carrier offers a perfect combination of flexibility, precision, and productivity. Less maneuvering, faster workflows, and more efficient material logistics make it an indispensable tool for modern construction sites.

Condition: used, Year of construction: 2009, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2009 In General: Year of manufacture:2009 Control system:Siemens 840 D External gear diameter:1,200 mm Internal gear diameter:1,200 mm Maximum gear width:260 mm Maximum workpiece diameter:1,500 mm Machine base: Travel:600 mm Lateral adjustment:+/- 60 mm Cutting head: Spindle diameter:125 mm Ijdpfx Aszdxi Njqujic Tool holder:SK 45 Distance between spindle and table:0–820 mm Stroke length:270 mm Max. module:16 mm Max. tool diameter:300 mm Max. spindle speed:25 rpm Table: Table diameter:900 mm Table bore:320 mm Bore depth:520 mm Max. speed:12 rpm Max. table load:95 kN Equipment: Chip removal:2 magnetic belt conveyors Coolant supply:Cutting oil system with filter and temperature control Set-up operation:Electronic handwheel

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 16065, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 16,000 rpm, The seller can handle the disassembly and loading for €1,250! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 500 mm Spindle speed: 16,000 rpm Tool holder: SK 40 Milling spindle diameter at the front bearing: 70 mm Table clamping surface: 1,400 x 900 mm MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Iijdpfx Aqszdttpjujc EQUIPMENT Tool changer

Year of construction: 2007, condition: excellent (used), 3 AXIS VERTICAL MACHINING CENTER Isdpfx Ashvr Auequsic

Condition: used, functionality: fully functional, Year of construction: 1990, operating hours: 11,500 h, load capacity: 20,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: duplex, construction height: 4,800 mm, fork carriage width: 2,900 mm, fork length: 2,400 mm, total length: 6,100 mm, drive type: Diesel, construction width: 3,050 mm, Heavy-duty forklift - Diesel Load center: 1200 Mast type: Duplex Transmission: Clark Condition: Ready for operation and fully functional Technical condition: good Front tires type: Pneumatic Front tires size: 14.00-24 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires size: 14.00-24 Rear tires condition: 60 - 80% Iedpfx Aqezc Sbdouoic New forks + lifting chains / new forks + lifting chains

Condition: like new (used), AC 10(2) A, 230V Max. 500–24 degrees Application: Temperature monitoring Width: 67 mm Height: 100 mm Depth: 120 mm Weight: 426 g Ijdszd S Sqjpfx Aqujic Condition: Like new

Year of construction: 2024, condition: new, - 50 mm cutting height - 1210 mm cutting width - 12 driven rollers - 10 - 30 m/min variable feed rate - 37 KW Sawing Motor (more is possible) - 2,2 KW Feed Gearbox - 70 mm Sawing spindle Iijdpfxofdzrho Aquec - 225 mm Circular Saws - 4000 Kg weight of the machine