Horizontal machining center

Bauer Maschinenbau 94424 Arnstorf Bohrmax Z 30

Condition: excellent (used), Year of construction: 2014, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 256316, turning length: 1,000 mm, turning diameter: 730 mm, spindle motor power: 18,500 W, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, rotational speed (max.): 1,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, torque: 160 Nm, workpiece weight (max.): 680 kg, spindle nose: Cône 7/24, N°40, table load: 880 kg, number of slots in tool magazine: 120, pallet changer: automatic, Equipment: CE marking, chip conveyor, documentation/manual, Secondhand Mazal Integrex i500V Njdpfsyymrmox Af Selg

Condition: excellent (used), Steel headstock Center height 650 mm Nedpfogzhbzex Af Solg Distance between centers 650 mm Height from base 1190 mm The total height can optionally be reduced by 100 mm, and the center height can also be reduced by 100 mm, by removing an intermediate plate. Further details, see image.

Condition: like new (used), Year of construction: 2007, operating hours: 300 h, functionality: fully functional, machine/vehicle number: PSW-L, Used in very good condition, only 300 operating hours, 3 pallets included, documentation included Nledou A Ddwopfx Af Sog

Condition: used, Year of construction: 2000, centre height 400 mm centre distance 3.000 mm max. swing over bed 810 mm max. swing over facing slide 510 mm max. swing-dia. in gap 850 mm control WEILER max. workpiece weight 3.800 kg spindle diameter in front bearing 150 mm spindle bore 106 mm faceplate diameter 630 mm worktool system Parat tailstock quill taper MT 6 dia. of quill 115 mm spindle turning speed range 1 - 1.800 U/min Nlsdpfx Aoy Ty Ihjf Sjg Lathe - cycle-controlled | WEILER - E80 x 3000 equipped with 630mm faceplate, 400mm SCHUNK ROTA-S plus chuck, boring bar attachment, PARAT tool system as well as a chip conveyor. A comprehensive tool package is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-80 | E 80 | E80 x 3000 | E80x3000 | E 80 x 3000

Condition: used, Year of construction: 2002, turning diameter 0455 mm turning length 2000 mm control CNC Pilot Heidenhain swing diameter max. over bed cover 670 mm swing diameter above cross guideway 455 mm travel -x axis 320 mm travel -z axis 2080 mm spindle head 220 h5 spindle bore 107 mm turning speed range - spindle 4 - 2.800 U/min max. Torque 2.000 Nm drive capacity - spindle motor 30 kW turret (x-stations) 12 tool taper VDI 50 diameter of quill 120 mm pressure max. 14 KN quill stroke 120 mm tailstock taper MT 5 total power requirement 58 kVA weight of the machine ca. 10 t dimensions of the machine ca. 6,7 x 2,4 x 2,3 m CNC - Lathe GILDEMEISTER - CTX 600 E Serie 2 With 3 jaw chuck and self centering steady. Nlodpozgw Tfefx Af Ssg

Condition: new, functionality: fully functional, overall weight: 2,500 kg, total length: 4,200 mm, total width: 2,500 mm, total height: 2,170 mm, travel distance X-axis: 390 mm, controller manufacturer: Siemens, controller model: 840D sl + ShopTurn mit „manual machine“, turning diameter over cross slide: 370 mm, bed width: 433 mm, center height: 315 mm, center width: 2,000 mm, quill diameter: 100 mm, quill stroke: 200 mm, rapid traverse Z-axis: 8 m/min, rapid traverse X-axis: 8 m/min, spindle bore: 140 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 2 rpm, turning diameter over bed slide: 630 mm, Equipment: rotational speed infinitely variable, Swing over bed: 630 mm Center distance: 2000 mm Maximum speed range: 2500 rpm Spindle power (100% duty cycle): 20 kW (AC drive) Spindle mount: Camlock D11 Spindle bore: 140 mm Included equipment includes: - 8-station SAUTER VDI-40 turret - Movable control panel along the entire length - Chip conveyor - Siemens AC servo motors - Siemens power supply and amplifier modules - Automatic (or via M function) gear change (2 speeds) - Machining area covered by two sliding doors - Operating mode 1 and operating mode 2 (setup mode at 5 rpm) - Siemens 840D sl ShopTurn control system with "manual machine" - 15-inch touchscreen format 16:9 - With manual machines, cycles can be executed without creating a program header. - Siemens control option: residual material detection. - Absolute encoder (i.e., no reference point travel required). Nlodpfswgbuiex Af Sjg - USB interface on the control panel. - Manual tailstock with drag device and 100 mm spindle diameter. - Automatic central lubrication. - Coolant system.

Condition: excellent (used), functionality: fully functional, Chip processing plant for the deoiling of chips of all types (can be customized to your requirements). With this system, coarse and foreign materials are not a problem! The machines are patented and specifically designed so that foreign parts in the chips are automatically ejected. Included in the scope of delivery: - SPYRA chip crusher ZE 2000 - AME hinged belt conveyor (between crusher and centrifuge) - SPYRA chip centrifuge 500H (can be replaced with the larger 600H centrifuge upon request) - Additional discharge conveyor (if required) Not included but available as optional upgrades: - Tipping and lifting device for fully automatic filling of the chip crusher - Filtration system for extracting oil from the chips for reuse - Control cabinet Technical data for the SPYRA chip crusher ZE 2000: Total height with hopper: approx. 2,318 mm Dimensions (L x W): approx. 1,500 x 800 mm Weight: 2,000 kg Motor power: 22 kW Voltage: 400 V/50 Hz Speed at tear arm: 40 rpm Torque at tear arm: 3,500 Nm Inner diameter of tearing hopper (bottom): 315 mm Inner diameter of tearing hopper (top): 782 mm Height of tearing hopper: 412 mm Hopper capacity (tearing hopper): 85 liters Hydraulic unit Motor power: 0.75 kW Pump output: 2.4 liters/min Hydraulic tank capacity: 5 liters Operating pressure: 10–80 bar Maximum pressure: 160 bar Technical data for SPYRA chip centrifuge PSZ 500 H: Outer diameter: Ø 1,160 mm Drum diameter: Ø 500 mm Feed hopper: Ø 700 mm Discharge hopper: Ø 800 mm Total height (with frame height 1,160 mm): 2,735 mm Motor power: 4 kW Connection: 400 V/50 Hz Drum speed: 1,200 rpm Hydraulic unit, Spyra standard Power: 4 kW Voltage: 400 V Tank volume: 100 l Operating pressure (without oil filling): 100 bar Inspection cover bolted. No electrical monitoring. Alternative larger centrifuge PSZ 600 H: Outer diameter: Ø 1,260 mm Drum diameter: Ø 600 mm Nodpsyzhdysfx Af Solg Feed hopper: Ø 700 mm Discharge hopper: Ø 900 mm Machine height without base: 1,900 mm Discharge height: 835 mm Total height (with frame height 1,160 mm): 2,735 mm Total height is variable by adjusting the frame and hopper height Motor power: 5.5 kW Connection: 400 V/50 Hz Drum speed: 1,000 rpm Hydraulic unit, Spyra standard Power: 4 kW Voltage: 400 V Tank volume: 100 l Operating pressure (without oil filling): 100 bar If needed, please contact us for a tipping and lifting device, swiveling discharge conveyor, filtration system, or control cabinet.

Year of construction: 2011, condition: ready for operation (used), An automated pallet handling system DMG Mori for machining centers is available. Pallet positions: 7, max. workpiece weight: 250kg, max. workpiece diameter: 500mm, max. workpiece height: 400mm, pallet change time: under 40s. Documentation available. An on site inspection is possible. Nodpfx Ajydd Acjf Solg

Condition: ready for operation (used), Year of construction: 2022, operating hours: 6,000 h, functionality: fully functional, spindle speed (max.): 4,000 rpm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 30 m/min, turning diameter: 450 mm, total length: 8,720 mm, total height: 3,888 mm, total width: 4,325 mm, type of input current: three-phase, torque: 585 Nm, overall weight: 18,000 kg, controller model: Siemens 840 D sl, For sale: a Hessapp DVT400, manufactured in 2022. Equipped with a Siemens 840 D sl control system. Nledpfx Aew D Apcof Sjg Features: - Powered tools on the left turret - Infeed and outfeed conveyor - Chip conveyor (discharge on the right) - 2x tool holders, 12x VDI50 The machine is operational and can be inspected.

Condition: excellent (used), Year of construction: 2001, Length:1200mm Width:800mm Height:1200mm Weight:290kg Nljdpfjx Tp Dxsx Af Sjg