Used Vertical Milling Center for sale (23,323)

Condition: used, Year of construction: 2001, x-travel 550 mm Nwsdpfx Ahoynnu Dovec y-travel 500 mm z-travel 400 mm Control Siemens spindle tunring speed 12.000 U/min table surface area 1050 x 450 mm table load 500 kg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2008, functionality: fully functional, Control: MAZATROL 640 workpiece diameter, max.: 1.050 mm workpiece length, max.: 1.000 mm Max. Spindle speed: 10.000 rpm table speeds: 500 rpm table drive: 37 kW Nodpfsynk Ugsx Ahvjwc number of tools: 80 number of paletts: 2 chucking diameter: 800 mm

Condition: used, Year of construction: 2006, functionality: fully functional, Control: MAZATROL 640 workpiece diameter, max.: 1.050 mm workpiece length, max.: 1.000 mm Max. Spindle speed: 10.000 rpm table speeds: 500 rpm table drive: 37 kW number of tools: 80 Nwjdpfjynk Efox Ahvjc number of paletts: 2 chucking diameter: 800 mm

Condition: used, Year of construction: 2006, x-travel 1050 mm y-travel 510 mm z-travel 510 mm control Fusion 640 M Nexus spindle taper DIN 69871/SK40 Feed speed 8000 mm/min. turning speed range 35 - 12.000 U/min rapid travel x/y/z 36 m/min distance spindle /table max. 660 mm distance spindle /table min. 150 mm no. of tools in the magazine 30 Stück tool taper CAT 40 Tool diameter 80 mm wotkpiece diameter with 2 vacant positions max. 125 mm max. tool weight 8 kg max. tool length 350 mm table length 1300 mm table width 550 mm number of T-slots 3 T-slot - width 18 mm T-slot - distance 100 mm max. table load 1200 kg table height over floor 850 mm coolant tank 250 l coolant pump 4,5 bar internal coolant system feed 15 bar Nedpfxjxp Rywo Ahvowc coolant capacity 271 l/min required air pressure 700 l/min spindle drive 18,5 connected load frequency 400 V connected load 36,6 kVA frequency 50 Hz Needed pneumatic pressure 5 (bei 200 l/min) bar weight of the machine ca. 6,9 t dimensions of the machine ca. 2,90 x 2,84 x 2,81 m Including special accessories: -Cooling through the spindle (15 bar) -Chip conveyor, hinged belt on the left side -Torque-dependent drilling cycle (Mazatrol) -Automatic determination of drilling depth increments after torque detection. preferably in combination with HSS tool) -Interface set Contents: - Interface for keyboard - Interface for mouse - Interface for printer Retrofitting not possible Machine color gray / black -CNC Performance Option Package contents: - Shared variables (600 pairs) - MAZAK Tornado thread tapping (EIA/ISO) - Synchronous thread cutting - EIA/ISO input function - EIA/ISO special function Spiral interpolation (G02.1, G03.1), 3D tool correction (G40-G42) Scaling (G50, G51) etc. - EIA/ISO, Constant feed (G93) When using this function, the feed rate remains constant for straight and curved combinations on the contour. - EIA/ISO tool length measurement (G37) - EIA/ISO, programme unit stop function Programme sequence is automatically stopped at a specified programme unit. - MAZACC-2D (Mazatrol & EIA/ISO) Precision control function for precise vector interpolation and optimal acceleration and deceleration at edges and radii. This enables improved two-dimensional shape accuracy. - Additional workpiece coordinate system (G54.1 P1 - 48) 48 pairs - Spiral machining function (G33) for boring head machining (e.g. with d'Andrea tool) - Used machine without warranty - - All dimensions, weight and performance data are non-binding

Condition: used, Year of construction: 2004, x-travel 510 mm Nwjdpfxjym D Aue Ahvec y-travel 355 mm z-travel 405 mm table surface area 786 x 355 mm control Kitamura spindle turning speed range 150 - 15.000 U/min spindle taper SK 30 table load 240 kg rapid traverse X/Y/Z axis 50/50/36 m/min ATC 20 Pos workpiece diameter at full load 70 mm tool diameter if 2 vacant positions 100 mm tool length - max. 200 mm weight of tools max. 2 kg total power requirement 15 kVA weight of the machine ca. 4 t dimensions of machine L x W x H 2,4 x 2,1x 2,63 m

Condition: good (used), Year of construction: 2003, x-travel 500 mm y-travel 500 mm z-travel 420 mm Control Heidenhain / Millplus total power requirement 35 kW weight of the machine ca. 5,7 t Nwjdsymqxcjpfx Ahvoc

Condition: used, x-travel 630 mm y-travel 500 mm z-travel 500 mm Nedpfoynnuqsx Ahvowc weight of the machine ca. 4500 kg

Condition: used, Machine has a defect in the main spindle CNC vertical machining center CHIRON type FZ 22 L high speed Machining center with CNC control FANUC Series 21-M serial no. 179-98 year of construction 1999 Travel X: 2000 mm, Y: 520 mm, Z: 630 mm Table size 2700 x 570 mm Table load 525 kg (per meter) Tool holder SK 40 (DIN 69871) Drilling capacity 35 mm Tapping capacity M27 Tool diameter 75 mm Diameter with free secondary positions 105 mm Tool change speed tool - tool 2.0 sec. Tool change speed from chip to chip 4.8 sec. Distance spindle nose - table 190 to 820 mm Spindle speed max. 10,500 rpm Main spindle drive max. 18.5 kW Mains connection 400 Volt, 50 Hz, 32 kVA - Pendulum machining over 2 work areas (partition wall missing) Nwsdpfx Asquhbgshvoc - CNC control FANUC Series 21-M - Tool changer 40-fold - IKZ = internal coolant supply through the spindle - Spray protection cabin with sliding door - Indirect measuring system - Coolant device with chip conveyor opposite - Electronic handwheel Transport dimensions of the basic machine L x W x H 4600 x 2470 x 2950 mm Weight of the machine approx. 7.5 tons. Transport space requirement on the truck L x W x H 12000 x 2470 x 2950 mm Transport Weight on the truck approx. 10 ton. Weight 7.2 tons. good condition - machine has a defect on the main spindle

Condition: used, As-new CNC Vertical Machining Center, Milling Machine VMC, BAZ, HSC Milling, Machining Center TAIKAN B540Z Serial No. 1171009 Year of manufacture: 2017 CNC path control: SIEMENS Sinumerik 828 D Basic Travel range for working area X: 488 mm, Y: 400 mm, Z: 230 mm X-axis travel for tool change position X: 540 mm Table size 520 x 400 mm Spindle taper ISO 25 Distance spindle nose - table 165 - 395 mm Max. spindle speed 36,000 rpm, infinitely variable Feed rate 0 to 10,000 mm/min Rapid traverse 15 m/min Table load capacity 200 kg Max. tool length 120 mm Max. tool diameter 80 mm Max. tool weight 0.8 kg Tool change time approx. 10 sec. Axis drives 0.8 kW each Spindle drive 3.5 kW at 100% duty cycle Electrical connection 400 Volt, 50 Hz, 7.5 kW CNC path control SIEMENS Sinumerik 828 D Basic - Software: NCU V04.05+SP06+HF01 - Interfaces: LAN, USB and CF-Card - Measuring system for tool setting: METROL tool sensor Nwjdow Ed U Nepfx Ahvec - Vertical milling spindle = high-frequency spindle with liquid cooling and external recooling unit - Tool changer with 13 tool stations - Electronic handwheel - Coolant system - Protective enclosure with sliding door - Central lubrication - incl. 10 tool holders ISO 25 with ER20 collet chuck and a set of collets Transport dimensions (L x W x H): 1800 x 1500 x 2300 mm Weight: 2,900 kg Excellent condition – as new Machine comes from a showroom with very few operating hours.

Condition: used, Year of construction: 2007, x-travel 500 mm y-travel 420 mm z-travel 380 mm Control Heidenhain TNC 530 max. turning speeds 20-18000 min/-1 tool taper SK 30 table surface area 800 x 480 mm max. table load 500 kg number of tool places 32 Pos. max. tool length 280 mm max. tool weight 6 kg rapid traverse 50 m/min feed speeds 20 m/min weight of the machine ca. 5700 kg dimensions of the machine ca. 6,6 x 5,4 x 3 m Nodpjyk H Nrefx Ahvjwc total power requirement 45 kW Number of working hours 24.437 h spindle hours 9.874 h Number of axles 5 St. 5-axis Milling Center Deckel Maho DMG 50 eVo linear, built 2007 Attachment: 10 off SK30 tool holder Note: The control system occasionally switches to EMERGENCY STOP due to a hydraulic fault. This is probably due to the control system and not the hydraulic unit or hoses, as there are no leaks. The supplier expects that a minor repair will suffice.

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp Nwedpfx Aew Nklhehvsc - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, Year of construction: 2022, x-travel 1.650 mm y-travel 850 mm z-travel 900 mm Control Heidenhain TNC 640 spindle tunring speed 6.000 U/min power capacity 37 / 20 kW Torque (40/100%): 824 / 549 Nm tool taper SK 50 number of tool places 24 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Internal coolant supply - Table cleaning system - Infrared workpiece measurement, Heidenhein TS-460 with breakage monitoring - 4th axis, Tsudakoma RWA-250L-SM - Three-jaw chuck Ø250 mm - Extraction system - 2-stage gearbox - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Nwodpeykb Ipjfx Ahvjc Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2022, x-travel 508 mm y-travel 508 mm z-travel 508 mm weight of the machine ca. 3650 kg Nedpfx Ahoylz Dgevjwc

Condition: used, Year of construction: 2011, x-travel 1100 mm y-travel 610 mm z-travel 610 mm control Heidenhain 530 Nsdpfx Aheyk Ifhevjwc weight of the machine ca. 7800 kg

Condition: used, Year of construction: 2019, travel -x axis 1.525 mm travel -y axis 770 mm travel -z axis 625 mm control HEIDENHAIN - TNC620 table dimension (L x W) 1.600 x 750 mm numbers of positions in the tool changer 24 tool taper SK50 Milling machining centers - vertical | DOOSAN - MYNX 7500/50 II equipped with 24-way tool changer, ITC cooling system and chip conveyor. The machine only has 3.165h spindle hours. Nwodpfx Ajyhrbuohvec The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MYNX7500/50II | MYNX 7500 | MYNX7500 | MYNX-7500 | MYNX750050II

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Njdstuggcopfx Ahvjwc Machine incl. the f...

Condition: used, Year of construction: 2018, travel -x axis 1.050 mm travel -y axis 570 mm travel -z axis 510 mm control HEIDENHAIN - TNC620 number of spindle speeds 12.000 U/min tool taper BT 40 table dimension (L x W) 1300 x 570 mm numbers of positions in the tool changer 30 Milling machining centers - vertical | DOOSAN - DNM 5700 equipped with 30-way tool changer, ITC cooling system and chip conveyor. The machine only has 13.600 spindle hours. The machine is in a well-maintained condition and has exclusively worked on Aluminum and Plastics. The machine video from the production plant will be shared on request. Nodpfx Ajw Dgcaohvswc Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DNM5700 | DNM-5700

Condition: used, Year of construction: 1996, x-travel 1500 mm y-travel 650 mm z-travel 650 mm size of pallet 1740 x 650 mm spindle taper SK 50 spindle turning speed range 25 - 6000 U/min feeds longditudinal/cross/vertical max. 8 mm/min rapid traverse longitudinal and cross 26 m/min rapid traverse vertical 20 m/min spindle throat 665 mm distance spindle nose and table 200 / 850 mm drilling in full material 50 mmø threading M 45 ATC 60 Pos tool diameter 125 mm wotkpiece diameter with 2 vacant positions 260 mm workpiece length 400 mm Nwjdpfx Ahoyg N Shovec weight of tools max. 20 kg spindle drive 18,5 kW control MAZATROL M PLUS Accessories: chip conveyor, coolant

Condition: used, Year of construction: 1998, x-travel 2000 mm y-travel 600 mm z-travel 500 mm Nodpfx Asvvnf Uehvowc table surface area 2500 x 650 mm spindle taper SK 40 control HEIDENHAIN, TNC 426 ATC 36 Pos total power requirement 60 kW weight of the machine ca. 8,2 t dimensions of machine L x W x H 3,81 x 2,67 x 3,13 m = travelling column machine - with coolant through spindle - Accessories: NC-dividing unit (= 4th axis) with tailstock, center height 225 mm; various tool holders, chip conveyor, coolant - new spindle on X-axis in 2020

Condition: used, Year of construction: 2012, x-travel 800 + 50 mm Nwjdpfxsyi Hvcj Ahvjc y-travel 650 mm z-travel 550 mm b-axis -5 / +110 ° c-axis NX 360 0 control Heidenhain

Condition: used, Year of construction: 1998, Technical details: x-travel: 760 mm y-travel: 550 mm z-travel: 300 mm control: Röders RMS 6 Vers. 2.70 spindle taper ISO: HSK E40 turning speed range: 42.000 stufenlos U/min spindle head swivable left - right: -52 ° / +5° (B-Achse) ° feed:: 0 - 30.000 mm/min Tool changer: 18-fach Werkzeuge + 2 places for Werkzeugvermessung Table dimensions: 860 x 550 mm table load capacity: 800 kp Number of working hours: siehe Foto h compressed air: 6,5 bar total power requirement: 20 kW weight approx.: 7000 kg dimension machine xH: 3,1 x 2,4 x 2,6 m dimension coolant device: ca. 0,6 x 0,8 x 0,7 m other features: Highspeed direct spindle digital axis drives AC servo motors ball screw spray cooling (microjet cooling jet and lubrication unit) working spindle Fischer MFW - 1230/42 up to 42.000 rpm tool measuring laser and probe system PS 25.00 Manual control unit Climatic cabinet Cooling water recooler Hyfra The machine can be demonstrated under power. Nwedpfx Ahsu Ndbpovsc *

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB max. turning speeds 15.000 min/-1 tool taper HSK-A 32 number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the Nsdjwth Sbepfx Ahvswc scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 1981, Table work surface: 500 x 1400 mm Nwedpfx Ajydl E Eshvoc Permitted workpiece weight: 1000 kg Strokes: X1050 Y510 Z560 Rapid feed X/Y: 12000 mm/min Rapid feed Z: 10000 mm/min Main spindle motor: 11 kW Video of machine in operation available

Condition: good (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, CNC control Heidenhain TNC620 4th axis (NC dividing head) electronical handwheel 24-fold automatic tool changer coolant through spindle device chip conveyor exhaustion device Technische Daten / technical details: X-Weg / X-travel 1000 mm Y-Weg / Y-travel 550 mm Z-Weg / Z-travel 550 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 10000 UpM /rpm Tischaufspannfläche / table clamping area 1000x600 mm Werkzeugwechselmagazinplätze / number of tool places in changer 24 Antriebsleistung Spindel 40%ED / drive capacity spindle 40%ED 13,5 kW Nwsdpfstqd E Eex Ahvec Gewicht ca. / weight 6000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, CNC control Sinumerik 828D 24-fold automatic tool changer chip conveyor coolant through spindle device measuring feeler Technische Daten / technical details: Nsdpfxswu Tpnj Ahvjwc Verfahrweg X / X-Travel 1020 mm Verfahrweg Y / Y-Travel 520 mm Verfahrweg Z / Z-Travel 550 mm Tischgröße / table size 1100x500 mm Drehzahlbereich / spindle speed 10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in changer 24 fach Antriebsleistung Spindel / drive capacity spindle 9/22 kW Gewicht der Maschine ca. / weight 5500 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.