x-travel:700 mm
Mey8b
y-travel:500 mm
z-travel:450 mm
total power requirement:5,5 kW
weight of the machine ca.:4,4 t
dimensions of the machine ca.: m
more
for the production of straight / oval stems max cutting diameter: 70 mm Clamping length: 200 to 800 mm Motor: 5.5 hp, 2800 rev. / min. Special motor: 0.35 HP infinitely variable hydraulic motor: 2.0 hp
Fzdosfl70
more
Miling machine Gambin
X-axis travel: 600 mm
Y-axis travel: 230 mm
Z-axis travel: 560 mm
Table size: 1.000 x 230 mm
2-Axis DRO: R.S.F. Elektronik
Spindle nose: ISO40
Spindle speed: 25 - 1.600 Rpm
M2bat
Feed on axis: 10 - 630 mm/min.
Country of origin: France
Machine weight: 2.000 kg
Machine LxWxH: 2.000 x 1.300 x 1.800 mm more
Outdoor exciting pipe milling machine / portable edge milling machine for tubes to the weld preparation on pipes and boiler tubes.
Pneumatic actuator (6 bar)
Clamping range: 20-38 mm
2cvmh73vz
maximum wall thickness: 15 mm
more
spindle diameter:140 mm
x-travel:3000 mm
y-travel:1950 mm
z-axis:1750 mm
spindle stroke:1000 mm
Bndxjhem
spindle taper ISO:50
spindle turning speed range:4,5 - 800 U/min
spindle motor:27 kW
feed speeds:1,7 - 2400 mm/min
Table area:1800 x 2200 mm
workpiece weight:18 t
total power requirement:47 kW
weight of the machine ca.:52 t
dimensions of the machine ca.:7,2 x 5,7 x 4,65 m
The machine was overhauled in 2007 and new electric was fitted. digital readout, including B-axis ball screws for X,Y ... more
x-travel 600 mm
y-travel 250 mm
z-travel 350 mm
table-size 900 x 315 mm
spindle throat vertical 450 mm
spindle taper ISO 40
16 spindle turning speeds 32 - 2800 U/min
drive vertical 3,2/4 kw
speed horizontal 2,2/2,9 kw
18 feeds longitudinal and cross 16 - 800 mm/min
18 feeds vertical 6,4 - 320 m/min
drive: feed 1,5 kw
total power requirement 7,5 kW
weight of the machine ca. 2,3 t
Qmot2ukje
dimensions of the machine ca. 1,6 x 1,6 x 1,8 m
Condition: ready for operation
Electric 380 Volt
Coo... more
x-travel:400 mm
y-travel:400 mm
z-travel:340 mm
control:DIALOG 11
spindle taper ISO:SK 40
spindle turning speed range:40- 4.000 U/min
table-size:700 x 460 mm
9ppyfhswv
table load:350 t
feeds -stepless-:2 - 6000 mm/min
power capacity:3,0 kW
quill stroke:80 mm
coolant:ja/ yes
weight of the machine ca.:2,0 t
dimensions of the machine ca.:2,0 x 2,33 x 2,1 m
- control: DIALOG 11 - electrical hand wheel - coolant equipment - machine lamp more
rotor dia 630 mm
hobbing length 1700 mm
clamping length 1740 mm
milling cutter diameter 600 mm
range of angles 0 - 60 °
hob turning speeds 20 - 120 U/min
milling motor 45 kW
milling slide travel 1270 mm
spindle bore 203 x 838 mm
max. workpiece diameter 630 mm
pitch in mm 150 - 2500 mm
milling width 216 mm
boring diameter 100 mm
total power requirement ca. 60 kW
Zbdabbmuz
weight of the machine ca. 26,5 t
dimensions of the machine ca. 5,3 x 6,25 m
Auto Pump- Rotor Milling Machine
This machine... more
Miling machine Gambin
X-axis travel: 600 mm
Y-axis travel: 230 mm
Z-axis travel: 560 mm
Table size: 1.000 x 230 mm
2-Axis DRO: R.S.F. Elektronik
Yrkiuk
Spindle nose: ISO40
Spindle speed: 25 - 1.600 Rpm
Feed on axis: 10 - 630 mm/min.
Country of origin: France
Machine weight: 2.000 kg
Machine LxWxH: 2.000 x 1.300 x 1.800 mm more
internal diameter:50 mm
grinding depth:75 mm
Fb3hy3p
swing diameter:320 mm
weight of the machine ca.:2700 kg
dimensions of the machine ca.:2,4 x 2,2 m
:
:
:
:
:
:
:
:
:
:
:
:
:
3-jaw chuck:
magnet chuck:
oil mist lubrication:
internal grinding extractor:
100 % before loading warranty: none used internal grinding machine, make REINECKER, type ISA-5, year of production 1978 more
x-travel:2000 mm
y-travel:800 mm
z-travel:800 mm
spindle turning speed range:10 - 1400 U/min
tool taper:ISO 50
table surface area:2500 x 800 mm
weight of the machine ca.:18 t
Bjmpjmt3
total power requirement:20 kW
dimensions of the machine ca.:5,5 x 3,5 x 3,2 m
with swivelling vertical milling head horizontal milling spindle 3-axes digital readout make HEIDENHAIN motorized tool clamping hardened guideways, telescopic covers more
x-travel 800 mm
y-travel 500 mm
z-travel 450 mm
3r9euzfje
control FAGOR 8055 MC
table: 530 x 900 mm
spindle taper ISO 40 ISO/MAS-BT
turning speeds 60 - 3000 U/min
workpiece weight 900 kg
quill stroke 80 mm
feed - longitudinal/cross 1 - 5000 mm/min
feeds - vertical 1 - 3000 mm/min
rapid traverse: longitudinal and cross 10000 mm/min
rapid traverse: vertical 6000 mm/min
total power requirement 5,5 kW
weight of the machine ca. 3,6 t
dimensions of the machine ca. 2,8 x 3 x 2,2 m
Condition: good
... more
x-travel 1250 mm
y-travel 700 mm
z-travel 665 mm
table-size 1350 x 700 mm
table load 1200 kg
spindle taper ISO 50 DIN 69871
turning speed range 20 - 2100 U/min
control Heidenhain TNC 355
Mvslh
feed X/Y/Z-axis 1 - 3000 mm/min.
rapid traverse X/Y/Z axis 6000 mm/min.
spindle motor 14 kW
electrics - voltage/frequency 380 / 50 V/Hz
total power requirement 30 kW
weight of the machine ca. 10,3 t
range L-W-H 3,3 x 3,4 x 2,5 m
CNC control Heidenhain TNC 355
original HURON-milling head, hydr. tool c... more
x-travel 710 mm
y-travel 630 mm
z-travel 500 mm
control Heidenhain TNC 407
table surface area 600 x 1.200 mm
number of T-slots 9
T-slot - width 14 - H7 mm
T-slot - distance 63 mm
max. table load 500 kg
power capacity - milling spindle 11,5 / 7,5 kW
turning speed range - milling 5 - 5.000 U/min
max. Torque 800 Nm
transmission ratio 4
quill stroke 80 mm
Tool changer 22 pos.
tool taper SK 40 DIN 69871A
max. tool weight 8 kg
max. tool length 300 mm
max. tool-dia with free toolbox 130 mm
max. too... more
spindle diameter:100 mm
x-travel:1250 mm
y-travel:850 mm
z-travel:850 mm
spindle turning speed range:9 -1120 U/min
29p8xk9ro
table load:3 t
spindle taper ISO:50
Table area:1000 x 1100 mm
total power requirement:18 kW
weight of the machine ca.:12 t
dimensions of the machine ca.:7,5 x 4,3 x 2,8 m
- HEIDENHAIN TNC 135 control - spindle support bearing more
x-travel 800 mm
y-travel 210 mm
z-travel 400 mm
Ypxrac
table-size 1100 x 240 mm
spindle turning speed range 66 - 1500 U/min
spindle taper ISO 40
feeds 11 - 500 mm/min
coolant
voltage 380 V
total power requirement kW
weight of the machine ca. 1,5 t
dimensions of the machine ca. 1,70 x 1,50 x 1,80 m
more
x-travel 1010 mm
y-travel 310 mm
z-travel 440 mm
table surface area 1600 x 450 mm
speeds 28 - 2240 U/min
control Grundig Manual Plus
spindle taper ISO 50
weight of the machine ca. 5 t
dimensions of the machine ca. 3,5 x 2,3 x 2,4 m
Electric 380 Volt
Cooling equipment
Div. receivings SK 50
Crfbbrb0
3-axes CNC path control MANUAL PLUS new in 1997.
The machine has run until last, but the control cabinet with its
many individual cables is now no longer connected. That is why we are sellin... more
spindle diameter 130 mm
x-travel 3000 mm
y-travel 2000 mm
z-travel 1600 mm
w-axis 700 mm
table-size 1800 x 1600 mm
spindle turning speed range 10 - 2500 U/min
tool taper ISO 50
Control Heidenhain 426 PB
workpiece weight 10 t
spindle drive 27,5 kW
B-axis (table) 90 °
total power requirement 44 kW
weight of the machine ca. 26 t
equipped with:
- 5-axis Heidenhain TNC 426 PB CNC Control
- Siemens Motors
- ATC for 40 Tools
- chip conveyor
Mv27p
- through the Spindle Coolant
- low Pressure Pump... more
Conventional millingmachine Schaffner
X-axis: 300 mm
Y-axis: 150 mm
Z-axis: 400 mm
Eeecqgd
Table size: 425 x 125 mm
Spindle nose: ISO30
Spindle speeds: 150 - 6.000 Rpm.
Country of origin: Switzerland
Machine weight: 350 kg
Machine LxWxH: 600 x 900 x 1.500 mm more
x-travel 710 mm
y-travel 600 mm
z-travel 500 mm
tool taper SK 40
Psjvcy
quill adjustment 80 mm
spindle turning speed range 0-6.300 U/min
feed speeds - directly programable 10 -3.150 mm/min
rapid traverse 6 m/min
milling head -swivable +- 90 Grad
spindle drive 7,5 / 9,5 kW
control Dialog 4
weight of the machine ca. 4,5 t
dimensions of the machine ca. 3,0 x 1,8 x 2,4 m
more
spindle diameter:100 mm
x-travel:1000 mm
y-travel:1000 mm
spindle stroke:710 mm
z-axis:900 mm
Tyea9brca
table surface area:1000 x 1120 mm
spindle turning speed range:8 - 1600 U/min
spindle taper ISO:40
total power requirement:20 kW
weight of the machine ca.:15 t
dimensions of the machine ca.: m
with digital readout more
x-travel:1000 mm
y-travel:480 mm
z-travel:480 mm
table width:315 mm
table length:1250 mm
table - longitudinal motion:1000 mm
:1250 x 315 mm
Rcxijyiml
turning speed range:28 - 1400 U/min
power capacity:3,7/4,4 kW
total power requirement:6 kW
weight of the machine ca.:2800 kg
100 % before loading warranty: none one used knee and column milling machine-universal, make UNION Bielefeld, type USF 4, Baujahr 1970, Maschinen-Nr. 55/214 more
x-travel 450 mm
Csrx2b7q
y-travel 320 mm
z-travel 450 mm
digital readout 3-Achsen ANILAM
spindle taper ISO 40
spindle turning speed range 80 - 1800 U/min
table-size 950 x 320 mm
feeds -stepless- 0 - 1000 mm/min
power capacity 4,0 kW
quill stroke 62 mm
coolant
voltage 380 V
weight of the machine ca. 1,5 t
dimensions of the machine ca. 1,50 x 1,50 x 1,90 m
- 3-Axis-digital readout
- rapid traverse
- central lubrication
- coolant equipment
more
Universal milling machine lid FP4 with 3 - axis digital display K & C new!
Technical data:
> Built in ca. 1980 machine Nr. 0088
> 3-axis digital display K & C new
> Solid angle table
> Speed: 31.5-1600 rpm
> Feed: 10-500 mm / min > feed and rapid motion in 3 axes
> Drill bit feed: 0.005-2 mm / min
> Power.: 4 KW
> Traverse path x/Y/Z: 700/450/450 mm (vertical head is movable 215 mm)
> Equipment: vertical SK 40 extendable
> Suit system S20x2
>... more
x-travel 870 mm
y-travel 370 mm
z-travel 400 mm
table surface area 1370 x 310 mm
table load max. 400 kg
spindle taper SK 50
spindle turning speed range 40 - 1740 U/min
feed - longitudinal/cross 15 - 1200 mm/min
3t07vewnx
feeds vertical 7,5 - 600 mm/min
rapid motion -longitudinal/cross/vertical 3,4 / 3,4 / 1,2 m/min
spindle drive 5,5 kW
total power requirement 9 kW
weight of the machine ca. 2,6 t
dimensions 2,15 x 1,97 x 1,95 m
Acc.: vertical head swivelling in 2 planes with hydr. tool clamp... more
travels:
- X - lengthwise 1,120 mm
- Y - cross 345 mm
Mujpx
- Z - vertical 400 mm
clamping surface 1,600 x 400 mm
table load 1,500 kg
spindle holder SK 50 - electromechanical tool clamping
system
swivelling milling head
spindle speeds 18 steps 28 to 1,400 rpm
infeeds:
X - Y 18 steps 16 to 800 mm / min
Z - 18 steps 5 to 250 mm / min
rapid traverse X and Y - 3,150 mm / min
rapid traverse Z - 1,000 mm / min
coolant device
electrical data 380 V / 18.5 KW
weight approx. 4,100 kg
doc... more
x-travel: 690 mm
Vb9gc
y-travel: 400 mm
z-travel: 500 mm
table clamping surface:: 1250x250
max. table load: 1500 kg
spindle speeds:: 18 Stufen/step 55-2800 U/min
height over floor: 1350 mm
feed: 10-630 stufenlos m/min
tool taper: SK40
total power requirement: 6,3 kW
weight of the machine ca.: 2,0 t
machine dimensions LxWxH: L:1,8xB:1,7xH:2.0 m
The working table can be adjusted manual or electric and is equipped with 4 t-slots.
The throat of the counterholder boom = 500, the total length = 105... more
x-travel:800 mm
y-travel:630 mm
z-travel:500 mm
feed stepless:1-7500 mm/min
rapid traverse feeds:7500 mm/min
tool cone:40 ISO
Cppmloig
spindle drive motor:10 kW
turning speed range - spindle:20-4000 U/min
Torque of spindles:630 Nm
total connected load:25 kW
weight of the machine ca.:5 t
dimensions of the machine ca.:15 qm
metrical version, 380V 50 Hz 3 phases:
rotatary table ISS CNC as 4th CNC axis:
:
100 % before loading warranty: none The machine is in very good condition (only one prio... more
x-travel 600 mm
y-travel 500 mm
z-travel 450 mm
control Heidenhain TNC 426
table surface area 530 x 900 mm
number of T-slots 8
T-slot - width 14 - H7 mm
T-slot - distance 63 mm
max. table load 400 kg
power capacity - milling spindle 9 / 6 kW
turning speed range - milling max. 42.000 U/min
transmission ratio 4
Tool changer 22 pos.
tool taper HSK 40
Ud8ew2pwy
max. tool weight 6 kg
max. tool length 300 mm
max. tool-dia with free toolbox 130 mm
max. tool diameter 80 mm
rapid traverse X-axis 10 ... more
saw blade diameter 400 mm
cutting diameter 130 mm
stroke 225 mm
cutting lenght max. 1800 mm
capacity 45 degrees: round 130 mm
capacity 45 degrees: flat 160 x 80 mm
capacity 45 degrees: square 110 x 110 mm
capacity 90 degrees: round 130 mm
capacity 90 degrees: flat 210 x 80 mm
capacity 90 degrees: square 110 x 110 mm
height of material-table 1050 mm
sawing motor 2,50 kW
cutting speed 14 / 28 m/min
min. workpiece diameter 10 mm
Ypxlxk
cutting length min. 10 mm
total power requirement 6,00 kW
weig... more
workpiece dia. over bed 500 mm
threading length 3150 mm
max. module 7 / 10
lead of leadscrew links 1/2 inch.
center height over bed 260 mm
workpiece dia. over saddle 250 mm
workpiece spindle bore 102 mm
workpiece turning speeds 0,036 - 1,98 U/min
Vorschübe - Wälzfräsen 0,076 - 4,16 mm/WU
Vorschübe - Längsfräsen 2,72 - 149 mm/min
hob turning speeds 18-224/45-560 U/min
main drive 4 kW
total power requirement 8,5 kW
weight of the machine ca. 6 t
8awdk8pbm
Machine is equipped with:... more
chamfer width 1 to 20 mm - stepless adjustable
Daunqtewo
chamfer angle 15 to 60° - steplessly adjustable
forward feed manual
speed 2,850 rpm
electrical data 220 V / 1.1 KW
with turning plates for replacement purposes, tools in
transport case
space requirements length - 455 x depth - 365 x height - 270
mm
weight approx. 25 kg more
spindle diameter: 90 mm
x-travel: 1000 mm
y-travel: 1000 mm
z-travel: 1600 mm
B-axis (table): 360° mm
drill depth: 700 mm
table load: 2,5 t
Ywc2ta2d
table-size: 1000x1120 mm
tool taper: Frässpindel ISO 60
tool taper: Bohren MK5 / DIN 228+1806
spindle speed max.: 8-1600 U/min
feed: 0,8 - 2000 m/min
total power requirement: 18 kW
weight of the machine ca.: 9,2 t
machine dimensions LxWxH: L5,6XB3,2xH2,7 m
dimensions electric cabinet: :0,8x0,8x2,0 mm
Table Type Boring and Milling Machine with face ... more
x-travel:1800 mm
y-travel:800 mm
z-travel:800 mm
table-size:2.000 x 700 mm
workpiece weight:3500 kg
drive capacity - spindle motor:17 kW
spindle cone:50 ISO
spindle turning speed range:3000 U/min
dimensions of the machine ca.:4.886 x 2.714 x 2.417 m
weight of the machine ca.:9 t
chip conveyor:
CNC controller: Heidenhain TNC 410
:manuell
:
32eccozqa
used universal bed type milling machine with chip conveyor, automatic 2 position (vertical/horizontal) head 3000Rpm The retrofitting jobs do... more
x-travel 625 mm
y-travel 525 mm
z-travel 455 mm
table-size 900x500 mm
quill stroke 80 mm
tool taper SK 40
feeds x/y/z -stepless 1-4000 mm/min
rapid traverse 10000 mm/min
Lojdv
milling head -swivable +/- 45 °
weight of the machine ca. 4 t
dimensions of the machine ca. 4,2x3,6x2,4 m
CNC Control Heidenhain TNC 407
more
Console milling machine, FNK
Type: FNK 2; Positp 855
Work surface: (250 x 1100 mm) 300 x 1300 mm
Workpiece weight of up to 200 kg
Speed range: 16 levels... 500 to 4000 RPM
Continuously variable (Variator)... 75 to 4000 RPM
Double-sided spindle rotation in the longitudinal plane: +-90°
In the transverse plane: +-45°
Rotation of the arm with spindle head: 360°
Total power: 4,0 KW
9reyg2eeq
Optional accessories: horizontal milling head; Long milling; Longitudinal dividing PDA2;... more
drilling capacity 16 mm maximum
milling performance end mill 20 mm
J2stxc27
milling performance cutter head 63 mm
outreach 185 mm
spindle holder MK2
milling head pivoted +/- 90°
speed steplessly adjustable 50 to 2,250 rpm with digital
speed display
right-/left-handed rotation
quill stroke 50 mm with digital display
travel - X - lengthwise - 150 mm
travel - Y - crosswise - 370 mm
travel - Z - vertically 440 mm
table size 500 x 180 mm
T-slots width 12 mm
electrical data 220 V / 0.75... more
spindle diameter:130 mm
x-travel:3500 mm
y-travel:2000 mm
w-axis:1250 mm
spindle stroke:800 mm
table-size:1800 x 1600 mm
table load:12 t
spindle taper ISO:50
spindle turning speed range:1 - 1000 U/min
feed range:1 - 3000 mm/min
total power requirement:50 kW
2eitcpv7u
weight of the machine ca.:35 t
dimensions of the machine ca.:7,5 x 7 x 5 m
with CNC HEIDENHAIN TNC 360 angular milling head spindle support bearing angle plate telescopic covers many accessories more
-Digital display
-Thread cutting device - Kueuhlmittelpumpe
Table 770 x 320 mm
Speed 40-3600 RPM
Spindle diameter 65 mm
Recording Aciera quick-change system
Spindle stroke 120 mm
Dimension WxDxH 90 x 130 x 185 cm
Weight 800 kg
9qwg99v9x
more
X/Y/Z 420/240/450 mm
Control HEIDENHAIN TNC 155
Speed 50-9000 RPM
Gouitsf
Feed 1-5500 mm/min
Rapid feed 7200 mm/min
Table surface 730x280 mm
Stroke quill 120 mm
Taper in spindle FEHLMANN SF 32
Dimension (WxDxH) 187x140x200 cm
Weight 1300 kg
Accessories:
A lot of accessories including 1 set of manuals
with electric handwheel
mit elektrischem Handrad more
WERKZEUGFRAeSMASCHINE cover FP 3 - 07-07-219
Shipping time: immediately
Gvds3c
Number: 07-07-219
Manufacturer: Lid
Type: FP 3
MACHINE DATA
Year of constr.: 1978 approx.
L x W x h: approx. 2000 x 1600 x 1900 mm
Weight: 1500 kg
Good general condition
TECHNICAL DATA
Digital display: 3 - axes - digital display HEIDENHAIN VRZ 752 B
Procedures:
X - axis: 500 mm
Y - axis: approx. 300 mm
Z - axis: approx. 380 mm
Table clamping surface (Tilt/Swivel table): 660 x 375 mm
S... more
x-travel:6000 mm
y-travel:1000 mm
z-travel:1000 mm
spindle drive:15 kW
Uci3av2ea
table-size:8000 x 1200 mm
rapid speed:10 m/min
spindle speed:10-2000 U/min
dimensions of the machine ca.: m
weight of the machine ca.:35 t
Used CNC traveling column milling machine with CNC control of NUM 1060 Further technical data and accessories, as defined in Appendix. Warranty: no Take advantage of the favorable leasing and rental conditions of ABC Leasing. Ask us about it. Upon request we can organize ... more
spindle diameter 150 mm
x-travel 3000 mm
Qw90mq8at
y-travel 2000 mm
z-travel 1600 mm
w-axis 700 mm
b-axis 360.000 x 0,001 °
rapid travel x/y/z 10000 mm/min
spindle turning speed range 10 - 2500 U/min
no. of tools in the magazine 80 Stück
table-size 1600 x 2000 mm
table load 12,5 t
spindle motor 52 kW
control SIEMENS 850M
total power requirement 100 kVA
weight of the machine ca. 34 t
dimensions of the machine ca. 11,5 x 8,2 x 4,6 m
- CNC control SIEMENS Sinumeric 850 M for 7 axis. Z-axis (co... more
x-travel 850 mm
7w3w2qm70
y-travel 270 mm
z-travel 400 mm
clamping table 1250 x 350 mm
spindle taper SK 50
turning speeds 18 / 35 - 1800 U/min
power capacity 5,5 kW
weight of the machine ca. 2,8 t
dimensions of the machine ca. 2 x 1,9 x 2,1 m
Condition: ready for operation
Cooling equipment
Seperate control cabinet
Vertical milling head ISO 50
Hanging panel with the operation elements
Counter-stay
Milling abours
Taper
Well - maintained heavy universal milling machine with fee... more
DIDN'T FIND ANYTHING SUITABLE?
Save this search now and we will inform you about new machines free of charge!
The Machineseeker trust seal gives buyers the ability to detect whether they have to do it with a trusted seller at a glance.
What do we check?
Check of the trade licence or commercial register extract.
Check the address of the dealer.
Validation of Bank connection .
Verification of the telephone accessibility the main phone number.
Credit report must not contains negative criteria.
Buyer complaints can lead to the withdrawal of the seal.
What does this mean for buyers?
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course occur anyway during the purchase process differences of opinion. Machineseeker and Thorsten Muschler GmbH is not liable for violations of the active Maschinensucher or Machineseeker buyer or seller.
Try our Machineseeker app now! Machineseeker app for iPhone and Android.
+44 (0) 20 806 810 84
+49 (0) 201 857 86 10
+48 (0) 223 076 958
