Used 4 Axis Machining Center for sale (83,811)

Condition: used, Year of construction: 2011, operating hours: 37,463 h, Functionality: fully functional, machine/vehicle number: M34216027081EHC, travel distance X-axis: 750 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, table width: 1,000 mm, table length: 510 mm, spindle speed (max.): 15,000 rpm, Hurco VMX 30 T CNC machining center with additional 4th CNC rotary axis Year of manufacture 2011 Serial No. M34216027081EHC Frame No. H-30688 Gielhccswgbfueqrsw Hurco Winmax control system Table size 1,000 x 510 mm 3 axes, X/Y/Z travel 750 x 510 x 510 + 4th rotary axis Max. table load 1,350 kg Max. spindle speed 15,000 rpm Tool holder SK 40, 24-station tool changer, coolant system, chip conveyor

Condition: good (used), Year of construction: 2009, Internal Article No.: 25040 Gijlhjwy U Eboccqrjw CNC Machining Center Müga A7040 Year: 2009 Control: Mitsubishi + 4th axis + ICS (internal coolant supply) / filtration system / extraction system + NC clamp Röhm RKE-125L + SK40 tool holders Spindle: SK40 Spindle speed: 12,000 rpm 24-position tool changer Travel paths: X 700 / Y 400 / Z 550mm Dimensions (approx.): LxWxH 270 x 210 x 270cm Weight: approx. 4t

Condition: good (used), Year of construction: 2000, Description: Hedelius BC80 Type: 4-axis machining center Control: Heidenhain TNC430i Year of manufacture: 2000 Travel X: 2500mm Travel Y: 800mm Travel Z: 750mm Table clamping area: 3220 x 800mm Tool holder: SK40 Tool changer: 40 positions Spindle power: 10kW S1 / 15kW S6 Spindle speed: 50 to 15,000 rpm Total connected load: 25 kVA Special equipment: - Partition for pendulum machining Gielhcswy Dy Iecqrsw - Internal coolant supply - 4th axis Hoffmann with counter bearing, hydraulically clamped - Belt filter - Scraper conveyor for chips - Rinsing guns - Renishaw TS27R tool measurement system - Renishaw infrared workpiece measurement system - Ethernet connection - Handheld control module Other details: - Ball screws on X and Y axes replaced in 2018 - Complete documentation available Machine weight: approx. 20t Required floor space: 6.5m (width) x 3.8m (depth) x 3.7m (height)

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, Mitsubishi M-V5CN (Yr. 2001) Controller Mitsubishi X Travel 800mm Y Travel 510mm Gslhcewvricocqrjiw Z Travel 460mm RPM 12,000rpm # ATC 30 Taper BT40 Table-W 1,000mm Table-L 500mm 4th Axis Rotary Table Video upon request

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, travel distance X-axis: 915 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, total height: 2,370 mm, total length: 2,760 mm, total width: 2,760 mm, overall weight: 7,300 kg, spindle speed (max.): 12,000 rpm, For sale is a 5-axis machining center from Hermle, model U740. The machine is in excellent condition and immediately available for use, having only been employed for light machining operations. Service history: - 2022: new geared motor - 2023: new timing belt, new ball screw, angular contact ball bearing Technical data: Year of manufacture: 2003 Control unit: Heidenhain TNC 530 Total spindle hours: 24,601 X-axis travel: 915 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Max. spindle speed: 12,000 rpm Tool holder: SK 40* Tool changer: 16 positions Milling head: -5° to +95° Milling head automatic swivel and clamping Gielhcowhpuaecqrsw Milling table: NC rotary table, 360° Compressed air through spindle center Dimensions: 2,760 x 2,390 x 2,370 mm Total weight: approx. 7,300 kg The offer also includes: Scraper conveyor Heidenhain probe Electronic hand control module Coolant gun Additional service pack installed on the control unit Transportation and loading can be organized on request, at extra cost, Europe-wide. All prices are subject to VAT. On-site inspection by appointment is possible. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Functionality: fully functional, Year of construction: 2006, 4-axis machining center X-axis travel: 7400 mm Y-axis travel: 1460 mm Z-axis travel: 620 mm Gielswbwhnohccqrsw A-axis: +/- 90 ° Electrospindle power 5.5 kW

Condition: good (used), Year of construction: 2006, 10.000 rpm SK 40 Lehmann - additional axis. Giolhccqswt Rhlerjw

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Gelhccjvvi Spjqrsiw Storage location: Nattheim

Condition: like new (used), Year of construction: 2012, operating hours: 16,140 h, Functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 800 mm, rapid traverse Z-axis: 1,020 m/min, controller manufacturer: FANUC FS31iA5, workpiece weight (max.): 1,200 kg, total height: 3,300 mm, total length: 6,000 mm, total width: 4,300 mm, table width: 630 mm, table length: 630 mm, overall weight: 20,000 kg, spindle speed (min.): 10,000 rpm, tool mount: 97 mm, tool diameter: 300 mm, tool weight: 30 g, CNC controller: FANUC FS31iA5 Axes X-axis travel mm: 900 Y-axis travel mm: 800 Z-axis travel mm: 1.020 Rapid traverse m/min: 50 B-axis degrees: 360° (0.001°) Worktable Number of pallets: 2 Table dimensions mm: 630 x 630 Max. workpiece weight kg: 1.200 Spindle Spindle speed rpm: 10.000 Spindle drive power kW: 35/25 kW (15 min/cont.) Spindle torque Nm: 488 Tool system Tool holder: HSK - A100 Tool magazine slots: 97 Max. Tool Diameter: 300 With occupied neighboring places mm: 100 Max. Tool Length mm: 690 mm Max tool weight kg: 30 Cooling Cooling through the Spindle Center bar: 30 Tank capacity: 955 L Equipment Chip conveyor Signal lamp Tool breakage probe Workarea light Air filter unit, for drying and oil separation of the supplied compressed air Internal coolant supply Machine running times Under power: 60.802 Spindle Working: 16.140 Basic machine dimensions / weight Length mm: 6.000 Width mm: 4.300 Gislhccqjwr Dg Sjrow Height mm: 3.300 Weight kg: 20.000

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Golev N Di Ajhccqrsiw Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: good (used), Year of construction: 1999, For sale is a horizontal machining center from Axa of the Vario type with 2 milling tables. The machine is in good condition and has done little "heavy machining" (was mainly used for drilling and thread cutting). Technical data: Year of manufacture 1999 Control: Heidenhain TNC 410 M digital Table dimensions 2030 mm *500 mm Maximum table load (evenly distributed) 800 kg Min. speed 30 1/min Max. speed 10.000 1/min Drill length on X-axis (mechanical feed) 1760 mm Drill length on Y-axis (mechanical feed) 500 mm Drill length Z-axis (mechanical feed) 620 mm Gjlhstt Abmsccqrjiw Machine dimensions: Height: 3900 mm Length: 2900 mm Width: 3000 mm Weight: 9 tons SCOPE OF DELIVERY/EQUIPMENT 1 spindle version SK 40 DIN 69 871 A 1 switch cabinet (integrated in the rear of the machine) Ball screws: Made by Deutsche Star Central lubrication unit: Bielomatik Hydraulic unit: Hydac RTA 2-300 MK-3 tailstock manually operated Electric handwheel HR 410 Scraper belt conveyor discharge side right Measuring probe TS 630 WORKPIECE HOLDERS NOT INCLUDED IN THE OFFER Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2003, X working area: 3550 mm Y axis stroke: 1100 mm 4 axes Gijlewt Nq Sohccqrew Z axis stroke: 425 mm Electrospindles: 1, ISO 30 attachment – max 18000 rpm Tool change positions: 4 Worktable: 4 clamps

Condition: excellent (used), Functionality: fully functional, 4 Axis 310 MM Gislhccewckinoqrow Fanuc Control Table 1300 MM L

Condition: excellent (used), Year of construction: 2002, Rover 24 Numerically controlled machining center from Norway Working fields: X = 4 500 mm; Y = 1380 mm; Z = 180 mm Configuration 2 - Rover 24 8 ATS (semi auto also operator need to make placement of beams and vacuum cups by hand) panel supports - 24 sliding supports for vacuum modules - 8 stops - 2 side stops 90 m3/h Vacuum pump Auxiliary vacuum system for 2 working areas machine Hinged reference stop* Incompatible with automatic positioning working tables* These devices are managed neither by the collision check nor by the simulator 2 Additional pneumatic side stops (1 Lh + 1 Rh)(for FT machines: side stops inclusive of the pneumatic system required) 2 Pneumatic central stops inclusive of the pneumatic system (1 Lh + 1 Rh) 2 Additional pneumatic central stops (1 Lh + 1 Rh)It requires the 2 central stops inclusive of the pneumatic system. clamping units for narrow pieces mechanical locking 8 Digital readouts for work area set-up of support beams and position of vacuum cups at the support beam. Equipment for the installation of pneumatic devices Uniclamp" module.For piece thickness from 40 to 98 mm.* It requires the prearrangement for the assembly of pneumatic devices. Vacuum module - Size 132x146 - H29mmIt can be rotated through 360°, with a step of 15° Pneumatic system for lifting bar supports N. 6 bar supports - pneumatic system required. Boring head BH 2820 vertical spindles (10 in X and 10 in Y)8 horizontal spindles (6 in X and 2 in Y) SLOT A 9 kW (12.2 HP) Electrospindle, ISO 30 adaptor, air cooling Operating device with 360° rotation and gear transmission.Incompatible with the flange for aggregate assembly. Blowing unit for electrospindle* Incompatible with 5-axes units SLOT B Prearrangement for the assembly of an electrospindle SLOT C Prearrangement for the assembly of an electro spindle ISO 30 Aggregate with 1 outlet for horizontal routings - Rh rotation - collet end aligned with motor axis Safety devices i n conformity with the basic safety requirements of the regulation 98/37/CE . For machine version L Automatic lubrication system. Belt conveyor for the removal of chips and off-cuts Transformer for voltages different from 380/400/415 Volt 50/60 Hz Ethernet card for network connection.* For numerical control NC 1000 New CNI Computer in 2019 New sealings for the Z axis in 2022 Magazine revolver 10 The machine is in very good condition , only one owner, come from a Norwegian company with 4 employes. All services made by Biesse dealer Norway each year. More pictures and video will be publish soon. Rekman Maskin & Service work with service of cnc machines since 1986 Gielswpbzhehccqrjw

Condition: good (used), Year of construction: 2016, X axis travel: 15.75” (400 MM) Y axis travel: 20.47” (520 MM) Z axis travel: 17.72” (450 MM) A axis travel: + - 110 degrees C axis travel: 360 degrees Gielhccqewdq U Torow Table loading area: 10.43” X 8.46” (265 X 215 MM) Allowable table load: 220 pounds (100 KG) Floor Space Required (W x D): 115.35" x 88.98" (2,930 X 2,260 MM) Height: 111.7” (2,830 MM) Machine Weight: 14,300 lbs. (6,500 KG) Standard Power Source Requirement - Fanuc: 205-235 Volts / 3 Phase/60HZ Power Capacity: 65 Amps Minimum (25 KVA) Air Source Requirement: 85 – 115 PSI

Condition: ready for operation (used), Year of construction: 2002, operating hours: 9,366 h, Functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS X-axis travel: 1,020 mm Y-axis travel: 610 mm Z-axis travel: 560 mm Spindle Spindle speed: 10,000 rpm Spindle power: 11–15 kW Pallet system Number of pallets: 2 Pallet size: 1,050 × 550 mm Giolowi Iw Aohccqrjw Cooling system High-pressure coolant system: 15 bar Tool changer Tool magazine: Chain type Number of tool positions: 40 Control system Control system: Fanuc 18M MACHINE DETAILS Overall dimensions (L × W × H): 4,020 × 2,660 × 3,080 mm Machine weight: 12,000 kg On-time: 37,210 h Operating hours: 9,366 h EQUIPMENT - Chip conveyor included - 4th axis integrated as a table

Year of construction: 2025, Condition: new, XX100292 CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 470 Machine in stock Gijlhccqsiv Imnsrsw Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Central automatic greasing system and device for manual greasing - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR202941 Fixed tool magazine for 8 positions in the center on the machine base - PR202962 Device for checking the integrity and measuring tool length - ZR204058 Pendulum mode with multiple workpieces (2 work areas, 4 workpieces) and processing of non-standard lengths with X-PAL: • Two pairs of additional vices with independent positioning • Transformation of std vices into vices with independent positioning • LED bar • Profile positioning software • Software for viewing the progress of the processing cycle • Device for measuring profile length • Second X-FLOW • Right pneumatic reference stop • Pendulum control software • Safety devices for pendulum processing • Tunnel for oversized profile machining • Software to manage oversized machining operations • ''Clock'' time calculation module program - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715010 Module for rigid tapping and chase tapping - PR202957 Hinged belt conveyor with ramp - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 - PR202967 Angle head with vertical disc Ø 230 mm - PR202968 Cone with horizontal disc Ø 250 mm - PR204497 Holder HSKF63 with cutter Ø 200 x 6 mm - PR203072 Software adjustment of the vice pressure 3,5 - 7 bar - ZP714611 License for the office version of FST CAM 4

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2007, 4-axis machining center Working range in x : 4000 mm Gjlhccqowfw Rkerjiw automatic movement of the clamps

Condition: good (used), Year of construction: 2002, Parts shown by hand not come. Technical details are shown on piucture. Gslswb Dxgohccqrjiw

Year of construction: 2017, Condition: like new (used), Crs 1740 x 530 x 510 mm; table 2300 x 530 mm; spindle speed 12,000 rpm; CAT 40 30-tool magazine; RENISHAW preparation; KITAGAWA 4 th axis; central separation for pendular work; chip conveyor. Gelhjpz Iwyoccqroiw

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 9809133, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 625 mm, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Type: 4-axis horizontal machining center Control: CNC Yasnac J300M Travel paths X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 625 mm Pallet system Pallet size: 500 × 500 mm Number of pallets: 2 Pallet indexing angle: 0.001° Tool changer Tool positions: 120 Tool interface: ISO 40 Gslhcewc R E Nocqroiw Spindle Spindle speed: 15,000 rpm Cooling: Internal cooling through spindle Feed rates Rapid traverse: 24 m/min Working feed: 1 – 10,000 mm/min MACHINE DETAILS Power supply: 380 V / 50 Hz / 67 kVA Machine weight: 11.5 t EQUIPMENT - Twin pallet system - Yasnac J300M CNC control system - Internal spindle cooling - Large tool changer (120 positions) - ISO 40 tool holder

Year of construction: 2021, Condition: as good as new (ex-display), Highlights: - 112 HSK100 tools in the System - Coolant System with 80 bar ineternal coolant high pressure - Latest Machine Generation Basic machine G640 Work area travel range: X = 1.050 mm, Y = 800 mm, Z = 1.050 mm Power supply 400 V, 50 Hz, TN-S Decentralized work area mist collector: 1.650 m³ Machine cooling system (approx. 20 kW) with an air-cooled cooling unit Control system SIEMENS SINUMERIK 840D sl with machine control panel GROB4Pilot access Swivel axis calibration GSC for 4-axis machining centers SINUMERIK MDynamics technology package - milling Control panel to enter tool data at tool loading and unloading position Motorized spindle HSK-A 100, 13,000 rpm, 226/265 Nm, 64/75 kW GROB spindle diagnostics GSD Rotary table with GROB pallet clamping system (B-axis) Gijlhccqolak Icorow Four-disc-type tool magazine HSK-A 100 with 112 (22+5|25|30|30) tool pockets, 5 for oversized tools Tool cleaning device Electromechanical tool breakage detection device Pallet change system for two pallets Setup station, rotated manually Setup station door for manual and automatic loading and unloading Pallet, 630x800mm, with V&B press-fit bushing Ø12F7 and threaded bushing M12 in the grid 40x40mm, without carrier Equipping the pallet with 6 fluid connections Scraper-type conveyor, discharge height 1,100 mm High-pressure cutting fluid system (10-80 bar, ICS) Compressed air feed through spindle center External compressed air supply via a flexibly adjustable hose Oil skimmer for cutting fluid care Flush gun at the work area Air gun at the work area Part clamping system in work area KP1: Pressure oil, proportional valve technology, 30-190 bar (H2.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology, 30-190 bar (H2.1) Part clamping system in setup station of pallet changer, customer-specific KP1: Pressure oil, proportional valve technology and volume counter 30-190 bar (H3.1) KP2: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP3: Pressure oil, manual pressure reduction, 30-200 bar (H1.1) KP4: Pressure oil, proportional valve technology and volume counter 30-190 bar (H3.1) KP5: Compressed air, manual pressure regulation, 0.5-5 bar (P1.1) KP6: Compressed air, seating check system (P2.1) Radio touch probe RMP60 (RENISHAW) 12-month warranty

Condition: ready for operation (used), Functionality: fully functional, 4-axis machining center Gijlhowfw Nteccqrsw

Year of construction: 2010, Condition: excellent (used), 4-AXIS MACHINING CENTER 2 PALLETS Gslhccjpy D T Heqrsiw Crs 730 x 730 x 740 mm, 2 pallets 500 x 500 mm, spindle speed 18,000 rpm, pallet indexing in all degrees, Renishaw preparation, BT 40 40 tool magazine, 70 bar center coolant, chip conveyor. CN MATRIX

Year of construction: 2011, Condition: excellent (used), Functionality: fully functional, AXIS TRAVELS X AXIS (longitudinal) (mm) 4,000 Y AXIS (transversal) (mm) 470 Z AXIS (vertical) (mm) 420 A AXIS (spindle rotation) 0°  180° ELECTROSPINDLE Maximum power in S1 (kW) 8 Maximum speed (rpm) 24,000 Gislhcjwbwnhocqrjw Tool attachment cone HSK - 63F AUTOMATIC TOOL MAGAZINE ON BOARD CARRIAGE Maximum number of tools in magazine 8 Maximum blade diameter that can be inserted into magazine (mm) Ø = 180