Used Machining Center Vertical for sale (68,401)

Condition: new, Year of construction: 2025, table width: 450 mm, table length: 900 mm, table load: 500 kg, spindle speed (min.): 8,000 rpm, number of spindles: 1, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. Cjdpfsxc I Dgex Ab Tshf As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 1179736, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, faceplate diameter: 500 mm, Submission of a bid obligates the buyer to collect the item on time by the end of 2025! TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 508 mm Travel Z-axis: 508 mm Swivel range: +120 to -35 degrees Rotational range: 360 degrees Faceplate diameter: 500 mm MACHINE DETAILS Electrical data Voltage: 440 V Phases: 3 Frequency: 50/60 Hz Chjdpfex Agv Iox Ab Tef EQUIPMENT Two-axis rotary table Standard T-slots Precision alignment bore

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 860 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 0i-MF Plus, spindle speed (max.): 15,000 rpm, Machining center with RoboJob Mill Assist automation, year of manufacture 2025! TECHNICAL DETAILS Travel Range X-axis travel: 860 mm Y-axis travel: 550 mm Z-axis travel: 550 mm Table Table size: 950 x 550 mm Maximum load: 800 kg T-slot width: 18 mm Number of T-slots: 3 T-slot spacing: 150 mm Chodpfjxz A Udsx Ab Tof Spindle nose to table surface: 150 - 700 mm Linear Guides & Speeds Linear guides: Ball guideways X/Y, roller guideway Z Rapid traverse X/Y/Z: 40/40/30 m/min Feed rate during milling: 0 - 10,000 mm/min Minimum increment: 0.001 mm Tool Magazine Magazine positions: 30 System: random-access Maximum tool diameter: 75 mm Maximum tool diameter with adjacent slots free: 150 mm (for 40 tools: 130 mm) Maximum tool length: 300 mm Maximum tool weight: 7 kg Spindle Spindle taper: SK-40 Drive power (30min/continuous): 18.5/11 kW Speed: 15,000 rpm MACHINE DETAILS Controller: Fanuc 0i-MF Plus Dimensions & Weight Machine dimensions (W x D x H): 2,260 x 2,900 x 2,775 mm Required floor space (W x D x H): 3,160 x 3,000 x 3,000 mm Machine weight: approx. 5,400 kg Coolant, Chip, and Compressed Air Management Coolant system: 300-liter tank and pumps Chip evacuation: chip spirals right and left in the machine bed Compressed air connection: at the spindle (M32/M33) Compressed air through the spindle: (M38/M39) Compressed air and coolant gun Electrical and Pneumatic Requirements Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar EQUIPMENT Prepared for fourth axis (FANUC control), incl. wiring and Harting connector (without axis driver) Bed flushing system Integrated coolant pump with 20 bar pressure Belt-type chip conveyor incl. chip trolley RENISHAW OMP-60 probe with infrared transmission RENISHAW NC4+ tool laser measurement system and tool breakage monitoring Auto-door (side door) Pneumatic interface for workpiece clamping RoboJob Mill Assist 25kg, year of manufacture 2025 Full enclosure with double gripper

Condition: ready for operation (used), Year of construction: 2010, operating hours: 14,400 h, functionality: fully functional, machine/vehicle number: A1003212.01, travel distance X-axis: 1,050 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 520 mm, controller model: Siemens 810D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X: 1,050 mm Travel Y: 710 mm Travel Z: 520 mm Tool holder: SK 40 Spindle speed: max. 8,000 rpm Spindle power: 12 kW Tool magazine: 30 stations MACHINE DETAILS Control: Siemens 810D Weight: approx. 5,600 kg Operating hours Spindle hours: 14,400 h Power-on time: 60,521 h EQUIPMENT Fully enclosed working area Cjdpfx Aexywa Esb Tshf Work area lighting Central oil mist extraction Hinged belt chip conveyor Internal coolant supply 20 bar Note: The last day for pick-up in 2025 is December 22, 2025. The earliest pick-up date in 2026 is January 12, 2026!

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FML14BE06, travel distance X-axis: 850 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, The machine is completely unused! TECHNICAL DETAILS X travel: 850 mm Y travel: 530 mm Z travel: 510 mm Spindle speed max.: 10,000 rpm Spindle speed min.: 150 rpm Distance spindle nose to table: 150–660 mm Distance spindle center to column: 585 mm Spindle diameter: 70 mm Table Table size: 1,000 × 510 mm Number and size of T-slots: 5 × 18 mm Table load capacity: 500 kg Feeds Rapid traverse X/Y/Z: 36 / 36 / 24 m/min Working feed: 1–10 m/min Cjdpfx Abox Ar Ucj Tjhf Accuracy Positioning accuracy: 0.01 mm Repeatability: 0.007 mm Tool Changer Tool capacity (arm type): 24 tools Tool shank: BT40 Tool change time (T-T): 2.0 s Drawbar: P40T-1 Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 7 kg MACHINE DETAILS Dimensions & Weight Footprint (W × D × H): 2,430 × 2,115 × 2,813 mm Machine weight: 5,800 kg

Condition: ready for operation (used), Year of construction: 2010, operating hours: 47,512 h, functionality: fully functional, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 850 mm, table load: 6,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,230 mm Travel Y-axis: 1,400 mm Travel Z-axis: 850 mm Table size: 2,000 mm × 1,250 mm Table load capacity: 6,000 kg Spindle speed: 6,000 rpm Spindle drive / Power: 38 kW Tool holder: SK50 Rapid traverse: 12 m/min Number of tool stations: 40 MACHINE DETAILS Control: HEIDENHAIN iTNC 435 Dimensions & Weight Machine dimensions (L × W × H): 6,135 × 4,338 × 4,150 mm Chjdpfox Agndox Ab Tof Weight: 22,000 kg Operating Hours Spindle hours: 47,512 h Program run time: 48,891 h Power-on hours: 72,846 h EQUIPMENT Coolant system Chip conveyor Internal cooling Electronic handwheel control Automatic tool measurement Workpiece measuring probe Chip flushing

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 1120 000155 3, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 530, spindle speed (max.): 12,000 rpm, Submitting a bid obligates you to collect the item by 16.01.2026! For loading, a complete semi-trailer with a height of 3 m is required. The consignment comprises 8 packages. Chjdpfx Aboxywlzj Tjf

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: Q0EC156, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, controller model: Fanuc 0i MD, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X: 450 mm Travel Y: 300 mm Travel Z: 300 mm Tool changer: 12-position Spindle taper: BT30 Spindle speed: 10,000 rpm MACHINE DETAILS Controller: Fanuc 0i MD EQUIPMENT Various tool holders Operating manual Cedsx Agtyopfx Ab Tjhf

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,200 kg, table width: 1,350 mm, table length: 600 mm, spindle speed (max.): 8,000 rpm, VERTICAL MACHINING CENTER DMG MORI NVX5100/50 YEAR 2015 ERGOline (Mitsubishi M730UM-B) Table: 1350x600 mm Axes travel: X:1050 Y:530 Z:510 mm 8,000 rpm, BT50, ATC30 Chip conveyor Automatic tool length measurement Workpiece setup detection Csdpfx Aex Axdksb Tshf

Condition: used, Year of construction: 2017, Universal Machining Center Machine type: DMG DMF 260 / 11 linear Control: CELOS Siemens 840D sl Operate Year of manufacture: 2017 Cedpfxsx Dr Urj Ab Tjhf TECHNICAL DATA: Travel distances: X-axis: [mm] 2,600 Y-axis: [mm] 1,100 Z-axis: [mm] 900 B-axis C-axis Number of controlled axes: 5 Rapid traverse (X/Y/Z) [m/min]: 80 / 60 / 60 Spindle speed range [rpm]: 20 - 15,000 Options: - Main spindle: 15,000 rpm, 46/30kW, SK40 - Dynamic package rapid traverse x-y-z: 80/60/60m/min - X-axis linear motor - Separate electronic handwheel - 60-position chain magazine - Bed flushing via M-function - High-pressure coolant pump 40 bar - 600L coolant tank with paper band filter - Rotary table integrated into table - B-axis in head - Automatic door - Coolant gun - Spindle probe - 2 pcs. Roto clear - Scraper belt chip conveyor This offer is non-binding and subject to prior sale. Changes, errors, and interim sale expressly reserved.

Condition: like new (used), Year of construction: 2023, operating hours: 9,000 h, functionality: fully functional, Lease return Used for one year 9,000 spindle hours CNC control: CELOS with Siemens 840D sl Operate 21.5" ERGOline control panel with multi-touch screen Motor spindle speedMASTER HSK-A63 20–20,000 rpm, 35 / 25 kW, 130 / 86 Nm (40 / 100% duty cycle) Tool changer: Chain magazine with 60 tool pockets and double gripper Machine weight per machine approx. 9,850 kg Technical Data Working Area Travel (X / Y / Z): 600 / 500 / 500 mm NC rotary swivel table, table size: 600 x 500 mm Swivel range B-axis: -5° to +110° C-axis: 360° continuous Table load: up to 400 kg Spindle and Drive Motor spindle speedMASTER HSK-A63 Speed range: 20–20,000 rpm Power: 35 kW (40% duty cycle), 25 kW (100% duty cycle) Torque: 130 Nm (40% duty cycle), 86 Nm (100% duty cycle) Tool Magazine Chain magazine with 60 tool positions Double gripper for automatic tool change Tool holder: HSK-A63 Cooling and Chip Removal Internal coolant supply through spindle with paper band filter Pressure range approx. 20–80 bar, frequency-controlled Coolant tank approx. 980 l Bed cleaning and extended work area flushing Double cartridge filter, fine filtration 50 µm / 25 µm Coolant temperature control unit, heating and cooling output approx. 4 kW each Scraper-type chip conveyor Coolant spray gun Oil / emulsion mist separator Rotating safety window in operator door Measuring and Monitoring Systems Infrared workpiece probe Renishaw Laser tool measurement system for automatic length and diameter measurement, retractable below table level, incl. calibration tool Software option 3D quickSET for verification and compensation of 5-axis kinematics Sensor package (2022 machine) with i4.0 sensors incl. spindle growth and coolant flow sensors Automation and Options 4-color signal tower Pneumatic actuation for zero-point clamping system EROWA UPC with rotary coupling and two active pneumatic circuits DMG MORI PROFIBUS interface with side loading door for robot connection, dual-channel safety circuits Safety glass in operator door, polycarbonate side windows, automation preparation Electronic handwheel Chodpox Dq Idofx Ab Tef Preparation for DMG MORI NETservice IoTconnector Service Agent and Messenger for remote maintenance and condition monitoring Equipment and Accessories Package DMU 60 eVo basic machines as described Chip conveyors and internal coolant systems on all machines Complete CELOS / Siemens 840D sl controls with ERGOline operating panels Workpiece and tool probes (Renishaw / BLUM) on all machines Preparation for zero-point clamping system EROWA UPC on all machines Documentation available in German and English Condition and Inspection All three machines are in very good condition, from a modern manufacturing environment with a high maintenance standard To the best of our knowledge, there are no significant defects or functional limitations A powered, in-operation inspection is possible by appointment

Condition: good (used), Year of construction: 1998, CNC Vertical Machining Center Cjdpfx Aowifzlsb Tehf MORI SEIKI SV500-50, Year 1998, Fanuc MSC-518 Control With pallet changer. Table: 1100x600mm BT50 spindle mount, 40-position magazine. Spindle speeds up to 6,000 rpm Travels: X800, Y510, Z510, Rapid traverse 32 m/min Machine without magnetic chipboard. Complete machine documentation available.

Condition: good (used), Year of construction: 2011, Traverses X Y Z: 1000 x 520 x 610mm, 24 station tool changer, Table 1100 x 500mm, spindle taper BT40, spindle speed 10,000rpm, Codpfx Abox Dk I Rj Tshf 24 station ATC, FANUC OI-MD Control, 11Kw power, coolant.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 14599631, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, The tool measurement system and the touch probe were retrofitted in 2022 for a total of EUR 15,000. The machine is prepared for 4th and 5th axis operation! TECHNICAL DETAILS Travel X: 500 mm Travel Y: 350 mm Travel Z: 610 mm Spindle speed: 18,000 rpm Spindle taper: SK30 Tool changer: 24 positions Chedpfx Asx Agp Ieb Tof MACHINE DETAILS Operating hours Program run: 13,613 h Machine on-time: 39,034 h Control on-time: 38,758 h EQUIPMENT Connection and drives for 4th/5th axis 3D touch probe Heidenhain TS642 Tool measurement Heidenhain TT140 Spindle chiller unit Heidenhain HR410 electronic handwheel Approx. 30 tool holders Collets Complete documentation 3D touch probe

Condition: excellent (used), Year of construction: 2012, Winmax control Travel paths X/Y/Z: 1060 x 610 x 610 mm Tool magazine for 24 tools, SK 40 Spindle speed: 12,000 rpm 4th axis Kitagawa Chodpjx Ddgtofx Ab Tjf Chip conveyor

Condition: good (used), Year of construction: 2022, spindle speed (min.): 12,000 rpm, Machine type: CNC-BAZ vertical Model: M1 Pro with 4th axis including tailstock Manufacturer: DMGMORI Control: Siemens 828 D Year of manufacture: 2022 Location: Germany Technical data Travel range X-axis approx. 550 mm Y-axis approx. 550 mm Z-axis approx. 510 mm Table size approx. 850 x 650 mm Max. workpiece weight approx. 600 kg Max. speed approx. 12,000 rpm Spindle motor approx. 13/9 KW Number of tool positions approx. 24 Rapid traverse X / Y / Z approx. 24 m/min Holder taper approx. SK40 Footprint L x W x H approx. 3.1 x 2.7 x 2.9 m Machine weight approx. 5,600 kg Equipment Main spindle 12,000 rpm 13/9 kW - Separate electronic handwheel - 24-place chain magazine - SK40 - Coolant tank - IKZ pump 20 bar - Filter for coolant - Bed flushing switchable via M function - Coolant spray gun - Spindle blowing air switchable via M function - Cabin roof - Measuring probe - 4th axis Chodpfox Dr D Tex Ab Tjf (Errors in the technical data and information excepted)

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: 810D, table width: 600 mm, table length: 1,200 mm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 7,600 h, Equipment: chip conveyor, rotational speed infinitely variable, Very nice DMC 1035 V ECO with Siemens control system Year of manufacture: 2012 Program run hours: 7,600 h SK 40 with 10,000 rpm spindle 30-position tool changer Production package with measuring probe and tool length measuring device in the work area Internal cooling Chip conveyor Codpfx Abjx Dci Tj Tjhf Available immediately.

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 730 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 40 m/min, total height: 3,264 mm, total length: 2,691 mm, total width: 3,965 mm, table width: 500 mm, table length: 500 mm, table load: 300 kg, rotary table diameter: 500 mm, rotational speed (max.): 1,200 rpm, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 35,000 h, spindle nose: HSK A 63, number of spindles: 1, number of slots in tool magazine: 180, tool length: 300 mm, tool diameter: 125 mm, tool weight: 80 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Mori Seiki NMV5000 DCG is a true powerhouse, and we have taken it directly from production, fully operational, from our client (see video). Additional specifications: Max. workpiece weight on table: 300kg Table height (from floor): 870mm Max. workpiece height: 450mm Table rotation speed (in turning mode): 0 - 1200 min-1 Table rotation speed (standard): 0 - 120 min-1 Max. tool diameter: 125 mm Cedpfsxgd Hxox Ab Tohf Max. tool length: 300 mm Max. tool weight: 8 kg Coolant tank capacity: 750L Machine dimensions: 2691x3965x3264 mm (LxWxH) Weight: approx. 15,000 kg total Includes: Original Mori Seiki tool block. KNOLL FKA/500 belt filter system + 3 filter rolls. Filtermist FX5000 emulsion mist extractor. Renishaw OMP60 3D probe. Chip conveyor. Spindle cooler. Original documentation + electrical diagrams. Photos were taken during disassembly at every stage and will be provided after purchase to assist with installation on site.

Condition: good (used), Year of construction: 2014, Traverses X Y Z: 800 x 520 x 610mm, 24 station tool changer, table 890 x 500mm, 11kW motor power, spindle taper BT40, spindle speed 40 – 8,000rpm, FANUC 0i-MD Control, low volt light, coolant, 4th axis. Chodpfxex Dk Hme Ab Tjf

Condition: excellent (used), Working travels 635 x 510 x 460 mm Table size 790 x 560 mm Spindle taper SK40 Spindle speeds -14'000 rpm Tool changer 30 Pos. Control HEIDENHAIN iTNC-530 3D measuring taper Chip conveyor Chjdorx Spmepfx Ab Tjf Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2022, Machine type: CNC Vertical Machining Center Model: CMX1100V Manufacturer: DMGMORI Control: DMG MORI SLIMline® Multi-Touch Heidenhain Year of manufacture: 2022 Location: Germany Options: - Main spindle 12,000 rpm 13/9kW SK40 - Tool holder BT 40 for pull studs DIN 69872 - Direct absolute measuring system X-Y-Z - Magazine with 30 tool stations - Through-spindle coolant supply (IS) 20 bar - Double changeover filter - External coolant air-blast switching via M-function - Chip conveyor (scraper type, left side) - Tank capacity (left side chip conveyor): 250 - Coolant spray gun for chip removal - Automatic cabin roof - Signal lamp - Electronic handwheel Chodsx Dr Dyepfx Ab Tof - Probe kit for spindle and table Travel range X-axis 1100 mm Y-axis 560 mm Z-axis 510 mm Table size approx. 1400 x 560mm Workpiece weight max. approx. 1000kg Rapid traverse X / Y / Z 30 m/min Floor space (L x W x H) approx. 4.04 x 2.8 x 2.95m

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 762 x 406 x 508mm, Table 915 x 355mm, Spindle speed 0 - 12000rpm, Codpsx Dk Evsfx Ab Tshf Spindle taper BT40, Spindle Motor 40Hp, HAAS Control, 30 Station ATC, coolant

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 762 x 406 x 508, Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Spindle Motor 20Hp HAAS Control, 20 Station ATC, Programmable Coolant nozzle, Low Volt light, swarf auger Chjdex Dk Epjpfx Ab Tef

Condition: good (used), Year of construction: 2012, Table size 1200 x 600mm, table load 500 kgs, Traverses X Y Z; 1020 x 610 x 510mm, spindle to table min-max 130 – 640mm, spindle speed 10,000rpm, Cedpfx Ajx Dk D Sjb Tohf spindle taper BT40 Big Plus, 24 station ATC, Fanuc oi-MB control, , coolant.

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle speed 12,000rpm, BT40 spindle taper, Spindle Motor 17kW, Chedex Dk Dlspfx Ab Tjf FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant