Used Centering Machine for sale (86,942)

Condition: used, Year of construction: 2014, Technical details: workpiece diameter - max.: 120 mm workpiece length: 403 mm spindle speed:: 750 / 1333 U/min workpiece diameter - max.: 120 mm workpiece diameter - min.: 25 mm workpiece length - min.: 117 mm workpiece length - max.: 400 mm work stroke: 40 mm total stroke: Einheit fest: 140 mm total stroke: Einheit verstellbar: 320 mm compressed air: 6 bar total power requirement: 4 kW weight of the machine ca.: 0,980 t voltage: 3x400V / 50Hz V dimensions L x W x H: ca. 2,1 x 0,8 x 2,1 m This is a centering and drilling machine that was specially designed for one of our customer's production concepts. Functional principle: The shafts are inserted by hand in the central area and then clamped at the touch of a button, after which drilling heads move simultaneously on both sides of the shaft and drill centering holes. Hjdpfevxrwmex Ah Njng 2x drilling heads (right/left) with tool holder/clamping fixture Mapal clamping cartridge, center height = 220 mm (machine currently equipped with collet chuck and centering drill) Clamping range max./min.: Ø 120mm / Ø 25mm via pneumatic cylinder, manual material feed Equipment: Grid enclosure EMERGENCY OFF *

Condition: good (used), 1 used coordinate centering tapping and drilling machine Make: Hartkämper Model: S 35-100 Technical specifications: Max. drilling capacity: 18 mm Hsdpjxuqd Tefx Ah Nsng Tapping capacity up to M 10 Drilling depth: 90 mm Throat depth: 215 mm Spindle-table distance: 150-450 mm Column diameter: 75 mm On coordinate table with Heidenhain digital readout for X and Y axis Measuring length X axis: 1000 mm Dimensions (machine footprint): Length: 1360 mm Height: 1700 mm Depth: 1000 mm

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2 6750 007, type of input current: three-phase, input voltage: 400 V, We are offering this used WAFIOS AF 750 centering and end-finishing machine, year of manufacture 2002. Hodpfxjx Srnqj Ah Nong Type: AF 750 Machine No.: 2 6750 007 Year of manufacture: 2002 Drawing No.: 6750 2 9000 07 Voltage: 3~ 400 V Frequency: 50 Hz Control voltage DC: 24 V Control voltage AC: 230 V Current: 35 A Fuse: 50 A If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: new, Year of construction: 2024, functionality: fully functional, Clamping range 25 mm ID to 120 mm OD Electric drive: 1050 W, 230 V, 50 Hz Speed of the tool carrier unloaded 150 rpm, nominal 70 rpm Clamping with wrench Hodpfevr Ec Aox Ah Neng Tool feed by hand Weight approx. 6.5 kg Incl. operating instructions In wooden box Incl. 1 planing knife 90 ° and 2 chamfering knives 30 °

Condition: good (used), Cutting / Centering Machine UMA SZM 100 E Year of manufacture: 1976 Serial No.: 33-0241 Clamping range: 10–160 mm Diameter for facing up to 100 mm Clamping length: 90–1950 mm Drill spindle: ISO40 DIN2079 2 clamping fixtures - Special program for internal threading with reverse feed and spindle reservation as a second program in automatic mode - Automatic triple chip-breaking for deep drilling - 2-edge positive tool head with 12H7 keyway for overcutting holders with 2 carbide indexable inserts SPGN 190 (DIN4968), with holder for centering drill R4.0 mm The machine was in use until recently and is fully operational. Hnedpsxt Dzpsfx Ah Njg Price: net, ex stock, loaded.

Condition: used, Year of construction: 2008, Technical details: max. workpiece diameter: 29 mm min. workpiece diameter: 26 mm Hnodpfxolqac So Ah Nsg workpiece length: 66 mm the system was originally delivered for the following workpiece sizes: diameter 26mm - 29mm length 65mm - 66mm Changing parts in the clamping device, handling, etc. would probably result in diameters of up to approx. Ø50mm Total length will probably be almost 400 mm possible with a few conversions. Also dependent on tool lengths, machining lengths on the component, etc. *

Condition: used, Machine for centering shafts, etc. 2 units available. 1x manufacturer Inpro, 1x manufacturer unknown. Both machines are operational and ready for immediate use. Sale price per machine: 1x €2,000, 1x €2,500. Hnodpfx Aox Rb Ahjh Njg

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale is an SMD pick-and-place machine from Fritsch GmbH, model placeALL 610, equipped with a single placement head featuring laser centering. The machine is fully operational and ready for use after programming. Technical Data: Type: placeALL 610 Hnjdjwy U Nmepfx Ah Nsg Year of manufacture: 2014 Placement rate: 600 components/hour Component sizes: 0402 chips up to 22x22 mm (alternatively up to 32x32 mm) Laser centering: non-contact, on-the-fly Slots: 108 Feed positions: 208 for 8 mm tapes Placement table: 520 x 370 mm Placement area: 620 x 450 mm Tool: 5 x standard Additionally: Camera system: Vision System II + lighting Dispensing system: CD-05 placement tool & air blow function Frame adjustment; access for robot arm from the left Universal CAD conversion Barcode reader for ID barcode Camera attachment for LM, SM, FP systems and much more. Feeders: - 2 pcs feeder racks with 16 slots each, for tape/tube feeders, front and rear side PA610 - 1 pc feeder rack with 22 slots, for tape/tube feeders, left and right side PA610/L - 20 pcs tape feeders 8 mm, max. tape thickness 1.1 mm, max. tape height 6.0 mm, max. tape width 8.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 4 pcs tape feeders 12 mm, max. tape thickness 1.4 mm, max. tape height 6.0 mm, max. tape width 12.3 mm, max. roll width 17.5 mm, 1 slot each, barcode configurable - 2 pcs tape feeders 16 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 16.3 mm, max. roll width 30.5 mm, 2 slots each, barcode configurable, incl. feeder extension 908.120.007 - 1 pc tape feeder 24 mm, max. tape thickness 1.4 mm, max. tape height 13.0 mm, max. tape width 24.3 mm, max. roll width 30.5 mm, 2 slots, barcode configurable, incl. feeder extension 908.120.007 - 1 pc vibration tube feeder, processes max. 10*SO sticks, 5 slots, barcode configurable - 1 pc feeder setup station with software for setting up and creating a complete component, PC connection via RS232 (PC not included) - 1 special PA wire feeder for feeding and cutting wire pins, including placement tool - 5 pcs tape feeder TF 943 cassettes for 8 mm rolls, width 11 mm Transport and loading can be organized Europe-wide upon request for an additional fee. Prices are exclusive of VAT. Viewing available by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to get in touch, please visit our website.

Condition: used, Log centering system for aligning logs with 6 rollers before cutting in sawmill systems. Hnodpfjxyw Dkox Ah Nsg Technical specifications: on demand feed: max about 70 m/min Hexagonal diameter: max. approx. 45 cm

Condition: used, Year of construction: 1991, Technical details: Hsdeu Iww Uspfx Ah Nong workpiece diameter - max.: 8 - 50 mm workpiece length: 5 - 500 mm spindle speed:: 100 - 1000 U/min workpiece diameter - max.: Ø 50 / Vollmaterial mm workpiece diameter - min.: Ø 8 / Vollmaterial mm workpiece diameter - max.: Ø 70 / Rohr mm workpiece diameter - min.: Ø 8 / Rohr mm wall strength: 1 - 10 mm centre height: 300 mm spindle hollow: Ø 90 mm cut-off length with swivable stop min/max.: 5 - 500 mm total power requirement: ca. 25 kW weight of the machine ca.: Anfrage t dimension machine xH: 5.,8 x 1,5 x 1,7 m dimensions electric cabinet: 1300x450x1950 mm dimensions L x W x H: panel de control: 0,36 x 0,30 x 0,68 m dimensions L x W x H: alimentación de material: 5,5 x 0,95 x 1,15 m Facing and Centering Machine (Manufacturing process cut to length and deburring possible) Other features: - turning speed of the parting head infinitely 100 - 1000 U / min. - speed end machining 4 wheelsets with speed from 52 - 1320 rpm. - feed push-off head continous, 0 - 0.3 mm / rev, hydraulic - feed deburring device feed infinitely 0 - 175 mm / sec. - feed head 0 - 0.03 mm / rev, continous - material supply speed 170 mm / sec. Operation is via operator panel / control panel i.D. *

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. Hjdpfx Ahoxb Ucao Nong - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, power: 24 kW (32.63 HP), pressure (max.): 120 bar, TECHNICAL DETAILS Minimum dimensions for double-sided machining: Diameter 12 mm, Length 200 mm Hedpfx Aoxxkd Ijh Njng Maximum dimensions for double-sided machining: Diameter 50 mm, Length 800 mm Minimum dimensions for single-sided machining: Diameter 12 mm, Length 75 mm Maximum dimensions for single-sided machining: Diameter 70 mm, Length 500 mm Cutter diameter: max. 140 mm Tool holder: SK40 Workpiece clamping: Hydraulic centering vice MACHINE DETAILS Performance Data Power: 24 kW Voltage: 400 V Frequency: 50 Hz Max. pressure: max. 120 bar EQUIPMENT Horizontal end machining center Simultaneous double-sided end machining of shaft-shaped parts

Condition: used, Year of construction: 1961, max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length 0 mm total power requirement 0 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m Hodpfx Ahowwl I Ie Neng The UMA was built in 1961 and the guides have been rebuilt.

Condition: good (used), Year of construction: 2013, E.Büker - Type N76 End Finishing Machine / Beveling Machine Hnjdpfx Aexnlnmsh Neg - Working range: 6 - 76 mm - Speed: 10-1800 rpm - Power: 0.75 kW - Base frame - Emergency stop Dimensions: LxWxH 0.7x0.5x1.4 meters / Weight 250 kg Errors and input mistakes excepted

Condition: used, Log centering system for aligning logs with 4 rollers before cutting in sawmill systems. Technical specifications: on demand feed: max. about 70 m/min Hexagonal diameter: max. approx. 45 cm Hsdpjxyw D Refx Ah Neng

Condition: reconditioned (used), Year of construction: 1985, In 2020, the machine was extensively overhauled for €7000. Proof available. Working processes: - 60° chamfering - longitudinal turning up to maximum 40 mm - Center drilling Work process fully automatic: - Clamping, chuck closed - rapid traverse forward - Work feed - Dwell time for cutting out - Rapid traverse back - Unclamp, chuck open Technical data: max. workpiece diameter round 80 mm max. workpiece diameter hex-SW 70 mm min. workpiece diameter round and hex 10 mm Hnjdoiamn Sepfx Ah Nog min. Workpiece length 450 mm Speed range stepless Stage I/Stage II = 51-306/102-612 Electrical equipment 220/380 V, 50 Hz Motor power main motor kW 1,3/1,8 Motor power coolant motor kW 0,07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Condition: new, Year of construction: 2024, workpiece weight (max.): 12 kg, - Weight approx. 11.8 kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, saving crane capacity, man hours and energy energy are saved If machines are in use, you have to crane to the machine and then back again Hsderi Sicopfx Ah Nong to the picking area - the time lost for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing on the machine) - All components are manufactured in Germany - Centering Din 333 Form A, 60°, 5, 6.3 and 8 mm. Other requests are also possible. A "must have" for every steel dealer! - Selling price: 5.950,- EUR net plus VAT ex stock, freight free within Germany - Scope of delivery: Fixture, Fein cordless drill, charger, - 2 rechargeable batteries - complete in case - 3 centering drills 5, 6.3 and 8 mm Din 333 A with surface, incl. 3 holders, one 6 m

Condition: used, Year of construction: 2000, max. workpiece diameter 40 mm min. workpiece diameter 10 mm workpiece length 200 - 640 mm Control SPS Siemens S5 95 U total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 8,5 x 2,8 x 2,35 m Hydraulic cutting and double-end machining machine suitable for pre-machining trapezoidal thread spindles and other round workpieces in the form of sawing off the bar and double-sided end machining such as chamfering, countersinking and drilling with fixed parts and rotating tools. Machine consisting of: - Basic machine model TR 60/4-650, passage 640 mm - Bar magazine for bar lengths 2 - 3.5 m Hnsdpjvp Sd Iefx Ah Neg - Normal version for solid material up to ? 40 mm - Central position of the bar feed rollers - Bar feed unit - Feed gripper in standard version - Cross switch with 4 clamping stations model TR 300.00 - 4 base jaws, width 80/140 mm, contact ? 75 mm - Swiveling cross switch in both directions - Saw unit with worm drive TR 200.00, stroke 100 mm - Saw blade 350 mm, speed 25/39 rpm - Motor power 2.6/3.2 kW - Motorized positioning of saw head - Automatic positioning of saw stand with hydraulic. Clamping - Saw blade guide - Processing unit no. 1 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 3 - USP.00/M - Speeds 842/1684 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Toothed belt drive - Machining unit no. 4 - USP.00/M - Speeds 943/1882 rpm, kW 3.3/4.0 - Working stroke 80 mm - Rapid feed 40 mm - Spindle mount ISA 40/M 16 - Unloading chute - Millimeter bars for all adjustment movements - Hydraulic system with feed pump SAUER SUNDSTRAND - Pressure accumulator - Rexroth flow regulator for machining units and saw - Coolant system with filter and container - Coolant pump CALPERA - Electrical equipment in separate electrical control cabinet, Control voltage 24V/50 Hz - PLC SIEMENS S5 95 U - Machine light - Flashing light to signal machine downtime - Central lubrication - Chip conveyor. In 2011, an extensive mechanical overhaul was carried out to optimize positioning and centering accuracy for € 25.000. In addition, switches, some cables, ball bearings, seals, hydraulic hoses, etc. were replaced. The machine has hardly been used in recent years; the seller estimates the whole operating hours at around 24,000. Machine under power in sellers factory. Machine dealer with own stock of 1600 m².

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Suitable for facing, internal and external chamfering - machine in very good condition and with lots of accessories! TECHNICAL DETAILS Workpiece diameter: 25 - 80 mm Workpiece length: 50 - 1,200 mm Workpiece weight (max.): 12 kg Control: Siemens PLC Tool holder: HSK 63C Spindle speed: 350 - 12,000 rpm Working height: 1,000 mm Axial movement of the milling spindle (automatic/manual, max.): 300 mm MACHINE DETAILS Total power requirement: 26 kW Machine weight: approx. 6.8 t Space requirement: approx. 7.7 m x 2.9 m x 2.1 m EQUIPMENT - 1 workstation - 2 spindle units. - Feed belt - Discharge belt Hedpfx Ajvpgtqoh Njng - Fully automatic process flow

Condition: good (used), Centering Machine - KUHN KAZ 80-2 - Max. workpiece diameter / round: 80 mm - Max. workpiece diameter / square: 60 mm - Centering length: endless - Clamping unit with self-centering vise - Spindle drive: 1.8 kW - Drill chuck - Chip tray Hodpfx Aexcmhwjh Njng - Power cable - Forklift slots for transport Dimensions: LxWxH 1.7x0.7x1.4 meters / Weight 600 kg Subject to errors and input mistakes.

Condition: good (used), Year of construction: 2001, In good technical condition and fully operational. Manufacturer: Rollsett Machine Oy Finland. Year of manufacture: 2001. Profile height: 18 mm. Entry width: 1,250 mm. Overall width: 1,146 mm; 1,166 mm. Construction width: 1,100 mm. Min./max. length: 0.5 lm/8 lm at a thickness of 0.50 mm. Accessories, aids: screws, sealing tapes, profiled seals, anti-condensation treatment, light profiles. Hodpfxjx Tf Itj Ah Nsng

Condition: new, Year of construction: 2023, functionality: fully functional, 5-axis travelling column machining centre - SAMAG SFZ3500- with swivel head and internal rotary table (Ø:1000mm, interference Ø:1300mm) X:3500mm Y:1000mm Z:1000mm Spindle: SK50 max. 12,000rpm 54kW Hsdpottv Hasfx Ah Nong Tool changer: 60 Control: Heidenhain TNC7 Coolant system with paper belt filter Internal coolant supply: 40bar (max. 80bar) Internal air supply through the spindle 3D touch probes Collision monitoring (DCM) Kinematics Opt The machine is available at short notice and can be inspected and tested at the factory.

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Hnodpfx Ajx Utd Ejh Njg Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: excellent (used), Year of construction: 2021, turning diameter over cross slide: 840 mm, turning length: 6,000 mm, spindle bore: 105 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 7,000 m/min, 3 chuck SCHUNK ROTA-S Plus 500-102 3 x Steady rest fixed Revolver VDI Duplomatic Siemens 840 DSL This type of lathe is commonly used in industries like: Oil & gas (pipe threading, tool joints) Steel industry (roll turning)  Power generation (turbine shaft turning)  Heavy machinery manufacturing DBC Turning Length: 6000mm Swing over bed Ø: 840mm Swing over cross slide Ø:570mm Spindle bore: 105mm Spindle power: 33kW Bed width: 450mm Tailstock spindle Ø: 220Ø Spindle taper: 5Mk Speeds / ranges: 1200Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 7000mm/min. Workpiece load: 2500 Length: 9500mm Width: 2300mm Height: 2300mm Hodpfxsx Sqaxo Ah Njng Weight: 8600kg

Condition: used, Year of construction: 2012, Model Year: 2012 Width: 1,050 mm Length: 515 mm Height: 600 mm Number of Axes: 3 Hnodpfox Tuddex Ah Neg Holder: BT40 Spindle Speed (RPM): 8,000 Processable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek