Condition: good (used), Year of construction: 1990, cut-off saw 3 KW Spindle diameter 40 mm Spindle length 185 mm Folewgi Aberc Dawepg

Condition: used, Working width 3500 mm Working height 2550 mm Felsvnwalsrc Dawopg Number of cylinders 6 St. loading dimensions L x W x H 4500x950x2900 mm weight 1800 kg Hess Speedy frame press ----- will be checked Insertion dimension / pressing length max. 3,500 mm Insertion dimension / pressing height max. 2,550 mm Sliding carriage for width adjustment locking in 50 mm Double hole grid system Electric height adjustment of the long-stroke cylinders (hydraulic) Insertion height of the abutment plates can be preselected in 4 positions 3 vertical printing cylinders stroke 1000 mm Pressure force per cylinder 2000 kN / 20000 N 3 horizontal printing cylinders stroke 80 mm Pressure force per cylinder 1250 kN / 12500 N Printing plate depth 100 mm width 140 mm Grid for cylinder fixation/rear bearing 50 mm Medium pressure beam with shut-off valve Final pressure switch-off and pressure control Control and pressing process in touch button operation Adjustable pressing pressure min. 25 – max. 160 bar Electrical connection 2.2 kW / 400V Image and video not original, show identical model ----- (technical data according to the manufacturer - no guarantee!)

Condition: used, Iseli Stelliting Machine SAA Fpslrswgh H Soc Dawog

Condition: ready for operation (used), Year of construction: 2010, This BRANDT Highflex 1440 edgebander was manufactured in 2010. Ideal for precise edgebanding applications, it ensures consistent performance for a variety of woodworking tasks. Consider the opportunity to buy this BRANDT Highflex 1440 edgebander. Contact us for more information. Application Types Fslrjwgf Hcsc Dawopg Edge Banding

Condition: used, Year of construction: 1993, machine/vehicle number: 4172/9-333, max. Schnittbreite : 4300 mm max. Schnitthöhe hor. : 2100 mm max. Schnitthöhe vert. : 2200 mm max. Bearbeitungsdicke : 80 mm Sägeblattdurchmesser : 300 mm Sägeblattbohrung : 30 mm Auflage unten : fest, mit absenkbaren Rollen Materialauflage : Holzlattung ausweichend Kleinteilauflage : Ja Messsystem : Skala Schwenkung Sägekopf : manuell Sägevorschub : manuell Befestigung : freistehend Absaugung : externe Absaugung Vorritzaggregat : mit Ritzmesser Gewicht ca. : 1500 kg Motorleistung : 4 kW Absaugdurchmesser : 2x100 mm Fslrc Daevw Ewkswjpg Horizontal teilbar für einfachere Einbringung

Condition: used, Year of construction: 2008, Underfloor painting system with return air ceiling and heating coil. Exhaust air unit, air volume: 6,000/3,150 m³/h. Motor: 2.7/0.7 kW. Supply air unit, air volume: 7,300/3,650 m³/h. Motor: 0.46/2.2 kW. Heater: PWW 80/60°C / 84 kW. Fpjljvwauksrc Dawjg Storage location: Nattheim

Condition: good (used), Year of construction: 1995, Working width 1100 mm Number of sanding units 1 st. Workpiece thickness max. 160 mm sanding belt measurements 1120 x 2150 mm Motor roller 15 kW Feed motor 1 kW Feed speed 2,5 - 13 m/min. Weight 2600 kg Fpolrsulncujc Dawsg

Condition: excellent (used), CATALOG NUMBER 7644 Technical data: - max. diameter of the main blade with a scorer 350mm - max. diameter of the main blade without a scorer 450mm - cutting height with a 100mm blade installed - hydraulically adjustable main blade up/down + angle - electric angle display - electric adjustment of the scorer up/down, right/left - spindle diameter 30mm - spindle locking - with a format carriage - cutting length on the carriage 2800mm - cutting width at the guide 1440mm - with a side carriage - with a scorer - max. diameter of the scorer 120mm - spindle diameter 22mm - scoring motor 0.75kW - main motor 5.5kW - 4 types of rotation speeds - electronic rotation display - diameter extraction nozzle 120mm, 80mm - table top dimensions 1220x730mm - table top dimensions with extension 1230mm - table top dimensions with extension 2070mm Fpslrc Daowgdh Sjweg - blade guard - dimensions length/width/height 2940x3400x1420mm - weight 1100kg ADVANTAGES – German production – with scoring saw – unpainted – used saw, very good condition Net price: PLN 29900 Net price: EUR 7030 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: used, Iseli BS 5 sharpening machine Iseli EBW leveling machine Fpsljwgh H Eorc Daweg

Condition: good (used), Year of construction: 2006, Industrial extraction system GESCHA, type: EURO-SET professional system, mobile, year of manufacture: 2006 Fpelrjv Sc H Ssc Dawog

Condition: used, Year of construction: 1998, machine/vehicle number: 188, Laufrichtung der Platte : von Bediener nach links max. Anleimerstärke : 12 mm min. Werkstückdicke : 10 mm max. Werkstückdicke : 40 mm min. Werkstückbreite : 70 mm min. Werkstücklänge : 200 mm Vorschubgeschwindigkeit : 10 m/min Aufheizzeit : 4 min Fügeaggregat : Nein Kappschere bis : 3 mm Einzelzuführung der Kante : möglich Beleimung : Leimkontaktwalze Kappsäge : Ja Kombiaggregat Bündig/Fase/Radius : manuell zustellbar Steuerungsart : Über Endschalter Bedienung : Bedienpult mit Tasten Motorleistung : 6,4 kW Fahreinrichtung : Ja Ausziehbare Rollenauflage : Ja Schutzhaube : Ja Gewicht ca. : 730 kg Absaugdurchmesser : 100 mm Abmessung : 3000 mm Folrowhtcnoc Dawjpg

Condition: used, Year of construction: 2025, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Storage location: Supplier Fslrowhr Nmjc Dawjpg

Condition: used, Model making machines Including over 100 canvas belts Including 11 profile sanding rods Used, excellent condition, little used Make: Zimmermann Type: PS 1 Extraction connection diameter 80 mm Space requirement approx. 1000 mm x 600 mm x 1800 mm Weight approx. 400 kg Fjlrcowhqxae Dawepg Storage location: 97447 Gerolzhofen, free on freight, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: used, CATALOG NUMBER 7643 ADVANTAGES Fpjlrc Daswgdg Ijwsg – German production – original DTR documentation – Vacum pump – 3 units – used grinder, perfect condition Technical data: - max. width of the processed element 1350mm - max. height of the processed element 160mm 3 units: 1) grooved metal roller for calibration 2) grooved rubber roller smooth metal roller + pneumatic shoe 3) 2 smooth metal rollers + sequential shoe with a jump – from above: - 1 rubber roller, sliding - unit - 1 metal roller, sliding - unit - metal roller, sliding - unit - pressure with sliding roller - 2 cleaning brushes – from below: - feed roller, metal, slipping - pulling belt - 2 metal, slipping outfeed rollers - pneumatic belt oscillation on photocells - electric table lifting - lifting motor 0.55kW - smooth feed speed regulation 3-15m/min - feed motor 2.2kW - pneumatic brakes - total power 48.7kW - vacuum pump 3kW - working pressure 6-8bar - diameter of the extraction nozzle 3x85mm, 1x81mm, 4x120mm - total dimensions length/width/height 3070x2300x3030mm - weight approx. 4000kg Net price: PLN 47900 Net price: EUR 11270 Net price calculated according to the exchange rate of PLN 4.25/EUR (at In case of larger exchange rate fluctuations the price may change)

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Fpolrswhr Ezsc Dawog

Condition: used, Year of construction: 1986, From a model shop Used, excellent condition, little used Make: Panhans Type 325 Year of manufacture: 1986 GS-tested Motor: 4.0 kW Top control panel Planing width: approx. 510 mm Infeed table length: approx. 1600 mm Removal table length: approx. 1150 mm Auxiliary stop Slotted/low-noise table lips Number of knives: 4 Blade system: Strip planer knives Chip thickness indicator Hollow-pointed joint Automatic brake Hollow-pointed joint adjustment Extraction connection: 140 mm diameter Space required: approx. 2800 mm x 800 mm x 1200 mm Weight: approx. 800 kg Folrcswhqw No Dawepg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Storage location: Nattheim Fjlrc Daewhr Euewjpg

Condition: used, Year of construction: 1986, From a model workshop Used, excellent condition, little used Make: Panhans Type 426 Year of manufacture: 1986 Machine No. 670 GS-tested Powered motor: 7.5 kW Fpslrcowhqw Ao Dawsg Planing width: approx. 630 mm Planing height: approx. 250 mm Adjustable table guide rollers Linked pressure beam Steel feed roller Feed rate: 7-14 m/min Number of knives: 4 Knife system: Strip planer knives Digital display for planing height Electric height adjustment with handwheel fine adjustment Extraction connection diameter: 160 mm Space required: approx. 1200 mm x 1000 mm x 1400 mm Weight: approx. 1150 kg Storage location: 97447 Gerolzhofen, free on load, unpacked Sold in the current condition, as seen, without warranty or guarantee

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Fjlrc Daowhr Enswspg

Condition: used, Year of construction: 1999, Main saw motors 18 kW each Scoring saw motors 2.2 kW each Collet opening: 130 mm Saw feed forward 5 - 125 m/min Saw feed return constant 125 m/min Cutting length rip saw: 2500 mm Cutting length cross saw: 1600 mm Collets rip saw: 4 Collets cross saw: 7 Stack height of lifting table when installed at floor level: max. 680 mm Lifting table 2500 x 1600, payload 7 tons Cross saw output 2 air cushion tables 2160 x 650 mm Intermediate table for thin panels 25/16 Main saw blade HM 450 x 4.8 x 60 Scoring saw blade HM 180 x 4.8-5.8 x 45 "Power-Loc" quick-clamping device for HS "Power-Loc" quick-clamping device for VS Fpelrswhr Ehec Daweg Storage location: Customer

Condition: used, Year of construction: 2023, Only 466 operating hours, including cross-screw discharge and automatic magnetic separator. Drive power: 18.5 kW. Throughput: 350 - 600 kg/h. Hopper: 990 x 990 mm. Screen: 30 mm. Blades: 27. Chopper dimensions: 1050 x 1500 x 1710 mm. Chopper weight: approx. 1700 kg. Fpolrowhr Amsc Dawjg Storage location: Customer.

Condition: used, Year of construction: 2011, Basic machine Stk Volt 400 EU Stk #93.07.31 Series 800 TV working areas 5020x1905 Stk # 52.19.14 8 Matic supports (Y=1825 mm) with 3 basic modules Stk # 52.19.92 for automatic vacuum suction cups Additional basic module for automatic vacuum suction cups Matic Stk # 52.19.99 4 working areas H= 50 Stk # 52.21.63 Front and rear stops H=50- 8 traverse Stk # 52.24.11 Integrated additional stops H=50 mm for 8 traverse Stk # 52.24.15 Central double rail (removable) with 6 stops Stk # 52.24.18 H=50 mm suction cup TV 145 x 30 H50 Stk # 52.18.69 Suction cup TV 145 x 55 H50 Stk # 52.18.70 Suction cup TV 145 x 145 H50 Stk # 52.18.71 8 Posi-Aids H50 Stk # 52.21.66 Group 800 - Electrospindle Prisma K 11 kW Stk # 52.21.80 Drilling head F50L2 (38V-80X-40Y-L0/90°) Stk # 52.22.51 PBTC-On Pos.3 Electrospindle PB+Rapid 6 Stk # 52.21.96 Tool magazine Rapid 12 on board (X,Y-traveling) Stk # 52.22.90 Stk # 52.22.92 Vacuum pump with 250 (300) M3/H50(60) HZ Item # 52.21.97 Folrc Daewhrvtjwopg Storage Location: Supplier

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Fslowhrvmerc Dawepg

Condition: used, Year of construction: 2022, Incl. 2nd glue pot. Glue thickness for roll edges: 0.4 - 3 mm. Glue thickness for strip edges: 5 mm. Min. - Max. workpiece height: 8 - 50 mm. Feed speed: 9 m/min. Pre-milling unit. Glue unit. Trimming unit. Rounding unit. Flush trimming unit. Radius scraper. Flat scraper. Buffing unit. Spraying unit. Fjlrc Dajwhrvgewjpg Storage location: Customer.

Condition: used, Year of construction: 2001, Max. cutting width: 4300 mm Max. cutting height: 2200 mm Sawblade diameter: 300 mm Max. processing thickness: 80 mm Sawblade bore: 30 mm Measuring system: scale Saw head pivoting: manual Saw feed: manual Extraction: external extraction Saw beam locking: manual Approx. weight: 1200 kg Dimensions: 5300 x 1200 x 2900 mm Motor power: 5.5 kW Fjlswhrvaorc Dawopg Storage location: Nattheim