Condition: new, Year of construction: 2025, Functionality: fully functional, cutting height (max.): 1,000 mm, cutting width (max.): 1,000 mm, cutting length (max.): 10,000 mm, power: 23.8 kW (32.36 HP), saw blade diameter: 700 mm, overall weight: 3,800 kg, Equipment: motor brake, The horisontal circular saw mill is designed for the production of radial sawn edged boards and beams from coniferous and hardwood logs by longitudinal sawing with two circular saws in both directions (without idling) at an angle of 90 °. Sawing is performing by movable carriage which is running alongside a fixed log. The log sawing scheme is chosen by the operator individually, based on the shift task and rational log cutting optimization, depending on its diameter. DISTINCTIVE FEATURES: - No need for logs sorting; - Individual sawing scheme for each log; - The possibility of sawing logs with a diameter of 150 to 1000 mm; - Efficient output up to 70%; - High productivity – up to 20 m³/shift (counting by raw roundwood). SPECIFICATION: Dimensions (for a cutting length of 6 m): Length: 3320 mm Width: 2220 mmHight: 2130 mm Track length: 13380 mm Cutting parameters: Max. log diameter: 1000 mm Min.log length: 2000 mm Max. dimension of the cut element: 200 x 200 mm (possibility of increasing the dimension 270x240) Dkob Ehlkjv D Rwvj Ajl Circular saw diameter: 450 - 700 mm Motors: Main motors power x2: 12 - 23,8 kW Shaft rotation speed: 1400 rpm Feeding system Feeding motor power: 1,5 kW Feeding motor rotational speed: 1450 rpm Feeding speed: 0-30 m / min *Using saws with a diameter of ø 450 mm, we can get a size max. 150x150 mm, with a saws with a diameter of 550 mm we get max. 200x200 mm, and in the version with a saw ø 630 we get a size of 240x240 mm., With a saw ø 700 the get an ability to increase the size to 270x240.

Condition: used, Year of construction: 2010, Functionality: fully functional, heating capacity: 600 kW (815.77 HP), total height: 3,400 mm, total length: 4,500 mm, total width: 3,000 mm, control cabinet width: 400 mm, control cabinet length: 1,000 mm, control cabinet height: 2,000 mm, Equipment: hot water, Endress moving grate combustion system with automatic discharge Dkjb Ejv N Hxgjhlk Aol with automatic ash removal with automatic ignition available from August 2025 Can be inspected during operation

Condition: like new (used), Year of construction: 2023, operating hours: 600 h, Functionality: fully functional, One as new 120kw wood chip boiler and complete fuel feed system. Has only run for short period of time and in excellent condition. Comes complete with ultra-modern control system. Dkjb Eswhc R Ushlk Asl

Condition: good (used), Year of construction: 2007, operating hours: 1,000 h, Functionality: fully functional, machine/vehicle number: 141-8300, cutting length (max.): 7,000 mm, saw blade width: 100 mm, year of last overhaul: 2022, Zenz BN 110 S saw with mechanization 22 kW drive motor 7 m cutting length 5 vertical supports 2 tensioners (+ 2 supports) Log lifter 4 leveling devices with claws 1 log roller 1 pre-cutter 20 l water lubrication drum PLC control Seat mounted on armrests PLC on the left - joystick on the right Mechanization, built in 2022, consisting of: Hydraulic flap frame for removal from the saw with electrically driven roller conveyor Roller conveyor with hydraulic ejectors 4 m roller conveyor All electrical and hydraulic elements can be operated from the operator's station. Zenz automatic sharpening machine, type AHB Dksb Ehlewhcwhsk Asl No. S-1012

Condition: reconditioned (used), Year of construction: 2007, Functionality: fully functional, cutting length (max.): 5,750 mm, cutting height (max.): 120 mm, cutting width (max.): 2,600 mm, main saw diameter: 460 mm, power: 27 kW (36.71 HP), Machine type: fh6 580 HT260 ERB-L / MCS-Evolution / Win 10 Cutting length: 5.750 mm Cutting width: 2.600 mm Year of construction: 2007 Dsb Eevx Ru Dehlk Aokl Saw blade projection max .: 135 mm Saw blade diameter max .: 460 mm Main saw motor: 27 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Package height max .: 120 mm Package height min .: 3 mm Saw aggregate forward: 6 up to 150 m / min Saw aggregate backward: up to 150 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 8 pcs grip push clamp Clamp opening: 125 mm Lifting / lowering device for clamps Strip aligner before and after the pressure beam Air cushion tables: 1 pcs. (2100 x 700 mm) Turn table: 1 pcs. (5800 x 2200 mm) 90° turnable Machine table: heavy-duty steel construction „Closed Frame Construction“ machine table surface is precision machined Machine table lips Automatic cutting length adjustment Lift table, max. panel width: 2600 mm Feeding roller conveyor: 7100 x 2600 mm Recesses for forklift trucks: 2 pcs Frequency converter for feeding roller conveyor Positioning stop: 2 pcs Push-off trolley Push-off device: 3 pcs Book aligning device for longitudinal board edges: 3 pcs Retaining device: 3 pcs Roller table Cross alignment stop at the roller table This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: good (used), Year of construction: 1984, cutting height (max.): 120 mm, overall weight: 2,500 kg, saw blade diameter: 360 mm, cutting width (max.): 230 mm, chain width: 250 mm, working width: 230 mm, saw blade bore: 80 mm, Multi-blade saw Manufacturer Raimann Type K 23 E With blade adjustment With 2nd socket Dkob Ehewhcqholk Aol With 3 laser lights Control panel for positioning control Cutting height without pressure rake: 120 mm Cutting height with pressure rake: maximum 110 mm Cutting height with movable saw blade without pressure rake: maximum 105 mm Cutting width: 230 mm Chain width: 250 mm Maximum saw blade diameter: 360 mm Minimum saw blade diameter: 250 mm Feed speed: 8 – 35 m/min. Feed motor 1.1 kW Saw motor 37 kW Saw shaft diameter 65 mm Saw blade bore 80 mm Shortest log length at 110 mm cutting height without pressure rake: 750 mm Shortest log length with pressure rake: 290 mm Maximum passage width from machine stand: 460 mm Table height 850 mm Table length 1770 mm Dimensions 2400 mm x 1500 mm x 1600 mm Weight approx. 2,500 kg

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 8106275, The Vacomat 300 XP large dust extractor is the ideal dust extraction system for multi-machine extraction. Air volumes of up to 6,000 m³/h can be conveyed with this clean air extraction system, which also makes it interesting for CNC processing or wide-belt sanding machines. The Vacomat 300 XP is equipped with an automatic control system as standard to ensure that the powerful extraction system is not forgotten or left idle. When a connected machine is switched on, the dust extractor fan starts automatically so that extraction begins immediately. Our Vacomat 300 XP is manufactured according to the modular principle. As standard, the dust and chip mixture is discharged into four dust-tight chip collection garbage cans (4 x 120 l) with inserted, sturdy plastic bags. A vacuum channel holds the plastic bags securely in the collection container. Viewing windows make it easier to check their fill level. It can also be discharged via chip containers, ATEX rotary valves and screw conveyors for disposal in a briquetting press, BigBags, a container or chip bunker. The filter bags are cleaned automatically after all connected processing machines have been switched off. Our patented filter shaker cleans the filter bags pneumatically/mechanically. Dust and chips are gently knocked out via the compressed air connection using a type of "shaking". Djbet Nfale Ehlk Askl As an option, especially recommended for very high and particularly fine dust content, an efficient pressure surge cleaning system is available (ATTENTION: overall height then +100 mm and length +350 mm). Cleaning via the compressed air tank takes place offline, after extraction operation.

Year of construction: 2005, operating hours: 18,000 h, Condition: used, machine/vehicle number: RUW 1703, Year of manufacture: 2005 Machine number: 1703 Track, m: 2,75 Crane type: ASX II Dkjb Ehlsmzawqok Ajl Reach: 13,0 m Lifting capacity without grab: 1.250 kg / 13,0 m Grab: included Crane arrangement: center cabin side: left at crane column !! Sale by customer order !!!

Condition: ready for operation (used), Year of construction: 2011, operating hours: 10,909 h, Functionality: fully functional, machine/vehicle number: 3001300311, travel distance X-axis: 3,150 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 100 mm, number of slots in tool magazine: 8, input voltage: 400 V, For sale CNC machining center profit H20 Format-4 Felder - 2011. The machine works continuously in a two-shift system, at the moment you can check it during operation! 3-axis center with preparation for the 4th axis (to start the 4th axis you need to buy a controller and a unit) Machining field 1250x3150mm, height Z = 100mm, possibility of working on two working fields. Dkob Ehlsv Sz I Iok Ael In 2024, the electrospindle was regenerated. All repairs and maintenance carried out by a qualified service. We provide loading. Transport on the buyer's side - truck, box length 7-8m Requirements to connect the machine: -Electric cable 5x4mm2 with a plug that fits into the sockets in the workshop -Electrical protection (at least) 32A industrial matched to the power of the engines General rule: rated current given on the machine (plate) + 40% -Pneumatic connection with an internal diameter of min. 12mm -Compressor with a capacity of at least 100l/min -Extraction installation We issue a VAT invoice The given price is gross. In case of questions, please contact us by phone or email

Condition: repair required (used), Year of construction: 2008, DEVICE MODEL SKORPION 650 EB Dimensions (length x width x height) [mm] 3000 x 1620 x 1400 (+600)* Weight [kg] 4555kg 4 cutting + 1 supporting Dksb Ehlkowhb U Ej Ael Inlet dimensions (width x height) [mm] 650 x 250 Cutting drum diameter [mm] 600 Cutting drum speed [rpm] 500 (3.4 knives on the drum) Feeding method belt conveyor Main engine power [kW] 110 Feeding motor power [kW] 2 pcs. x 4.0 Engine power at the receiving conveyor [kW] 2.2

Condition: excellent (used), Year of construction: 2019, BIESSE AKRON 1440 Airforce system (return system is not included) - Year 2019 - good condition - NC motors, all adjustable from PC control - Premilling • top pressure with belt instead of rollers • Auto infeed edge • Riepe release nebulizer • Glue pot • Air force system • Scissors • Pressure zone 3 rollers Dkob Ehlksv A H Ubs Ajl • Riepe antistatic nebulizer • Double saw unit 0-15° • Riepe lubricant nebulizer for delicate edges • Double motor corner rounding unit • Riepe cleaning nebulizer • Edge scraping unit • Glue scraping

Condition: excellent (used), Schuko 4kw sawdust extractor Djb Ehlowf Np Esk Askl Number of filter bags 24 Diameter of filter bags fi220mm Length of filter bags 115mm Number of collection bags 4 Diameter of collection bags fi500mm Diameter of inlet nozzle 250mm Dimensions of extractor 352x97x284cm

Condition: new, Year of construction: 2025, Functionality: fully functional, DANIBRUM CAS1080 Automatic Splitting and Edging Circular Saw – Speed, Precision and Safety in Cutting The DANIBRUM CAS1080 automatic splitting and edging circular saw is the ideal solution for processing timber and brass with high efficiency. This robust and precise machine ensures straight cuts at high speed, being recommended for users who want flexibility in operation and consistent high-quality results. Essential advantages: Working flexibility for edging and splitting various types of timber; High operating speed, ideal for intensive production; Precision in cutting, with straight and clean edges; Safety in operation, thanks to anti-kickback protection systems and ergonomic control panel. Main technical features: Suspended control panel: Mobile, pivoting – provides easy access from different working positions; Dsb Eswhbvcehlk Ajkl Intuitive interface with clear controls; Continuous electronic adjustment of the feed speed. Electric height adjustment: 0.25 kW motor for adjusting the blade holder spindle; Working height between 10 – 120 mm, displayed on the front on a graduated scale. Feed and safety system: Cast iron upper pressure bar, with independent rollers for secure fixation of the material; Anti-kickback devices, which prevent accidents during operation; Steel feed belt, driven by a 1.5 kW motor, with the blade centrally positioned. Cutting blade: Variable diameter Ø305 – 355 mm; Quick clamping system; Very good visibility of the blade; Manual height adjustment, by ergonomically positioned crank; Generous chamber for sawdust evacuation to the exhaust hood. Robust parallel ruler: Manual adjustment on cylindrical steel guide; Graduated scale and locking lever for precise settings. Centralized lubrication systems: Automatic electric pump for the feed chain; Dedicated device for guides and pressure rollers – ensures smooth operation and high durability. Additional functions: Positioning laser, for precise alignment of the material; Stroke limiters for correct positioning of the upper group; Free rollers in the work table, for quick turning of the material – height adjustable; Easy access to the cutting blade – quick and efficient maintenance. DANIBRUM CAS1080 is designed to increase the efficiency and safety of the cutting process in woodworking workshops, with an emphasis on continuous performance and intuitive operation. Ideal for professionals who need a reliable machine, easy to adjust and adaptable to various splitting and edging applications.

Year of construction: 1991, Condition: used, machine/vehicle number: 1194, Year of manufacture: 1991 Machine number: 1194 Track, m: 2,6 Crane type: ASX II (year of construction 2002) Reach: 13,0 m Lifting capacity without grab: 1.250 kg / 13,0 m Grab: included Crane arrangement: in front of the cabin cabin side: left saw: 1,3 m alpha sawdust container: included Dkob Ehlsgykrlek Ael measurement: dividing aid sale incl. 95 dm track system and polter from Baljer & Zembrod

Condition: new, Cefla painting system Dob Ehljwhbrwok Aokl

Condition: good (used), Year of construction: 2002, Underframe with funnel and chain conveyor for material discharge Filter area designed as an inlet or filter chamber with externally loaded filter hoses stabilized by support baskets, pressure relief device in accordance with VDI 3673 Clean air area with purge air fan mounted on trolley, access to the clean air area through maintenance door via ladder with platform and back protection according to UVW Circuit to control the cleaning (depending on the differential pressure) and the material discharge First commissioning in 2002 including rotary valve type V7 (pressure-tight) 1 "dry" fire extinguishing system 1 transport fan (clean gas) 4 vibration dampers 2 Flexible connections 1 circular flow line to feed two on-site containers 2 toggle switches 3 galvanized electric shut-off valves for shutting off the ring running pipe u tue fresh air intake when loading the silo 1 return air duct with 180 degree deflection and simultaneous pressure relief 1 splitter silencer 1 electric switch cabinet ES up to 140 KW 1 complete level indicator for chip bunker 1 pressure measuring device for suction 1 frequency converter type Danfoss VLT 6000 for transport system Filter system Filter area 522 m² - filter hoses 152 pieces (renewed approx. 1.5 years ago) - 1. Extraction fan D = 710 mm, motor 45 KW, volume flow 23,760 m³ / h. / 1475 rpm. at 50 Hz max. volume flow 31,000 m³ / h. / 1860 rpm. at 63 Hz - 2nd exhaust fan D = 710 mm, motor 45 KW, volume flow 23,760 m³ / h. / 1475 rpm. at 50 Hz max. volume flow 31,000 m³ / h. / 1860 rpm. at 63 Hz - 3rd chip transport fan (to the silo) D = 315 mm, motor 18.5 KW, volume flow 6,200 m³ / h. / 2935 rpm. at 50 Hz - Intake socket D = 570 mm / D = 450 mm / D = 350 mm Djb Ehohbv A Ajlk Aekl - Chain discharge 0.55 KW - Cleaning with a purge air fan 5.5 KW - Control cabinet with control and 3x Danfoss frequency converters Filter dimensions approx. Width = 2400 mm x length = 7500 mm x height = 9750 mm (discharge 2550 mm + 2400 + 2400 + 2400 mm = 9750 mm) Dimensions fan return air housing (2x) approx. Width = 1700 mm x length = 2000 mm x height = 4900 mm Total length of the system (filter + 2x fan return air housing) approx. 18.5 m New price of the system over € 200,000,-- More photos on our website

Condition: used, Year of construction: 1986, Panel laminating press for sale! Dsb Ehlkewhbgbe Aekl Manufacturer: POLZER Model: Kapfu 2 Year: 1986 Laminating table height: 735 mm Panel max. 1000 x 1000 mm Panel thickness max: 110 mm Heating from top Floor measurements: H 1710 mm, L 4500 mm, W 1400 mm

Condition: excellent (used), OSAMA S2R-400 Roller Glue Applicator Djb Eowf I Iyjhlk Aekl Working width 400mm Maximum working height 100mm Manual working height adjustment 2 top-bottom glue rollers Motor power 0.37kw CE marking

Year of construction: 2025, Condition: new, Functionality: fully functional, Improve the quality of your finish with the DAS LDX 1000 – 6 brush sander Dksbowhbtzs Ehlk Asl The DAS LDX 1000 – 6 automatic machine is designed for precise sanding and finishing of profiled wood or MDF elements, offering excellent results even for the most demanding aesthetic requirements. It is ideal for smoothing, fine sanding and final preparation of surfaces, thanks to the versatile and robust configuration of the 6 working units. Standard features and technical characteristics: Multiple working units: oscillating longitudinal drums, oscillating pads, transverse drums with Ø 280 mm and width 1000 mm, equipped with 20 helically mounted brushes. Working capacity: max. width 1000 mm, workpiece thickness max. 100 mm. Efficient sanding: disc rotation speed between 50 – 300 RPM (adjustable via frequency inverter). Sanding brushes: adjustable length between 20 – 70 mm, allowing detailed work on profiles with a depth of up to 8 mm. Touchscreen control panel: Ergonomically positioned, it allows independent control of each unit. The interface is intuitive, developed by DANIBRUM engineers for fast and efficient operation. Adherent conveyor belt: Equipped with ribbed rubber for constant advance, driven by a 1.1 kW motor. Includes automatic centering roller, height adjustment sensor and brushes for dust removal at the entrance and exit. Professional sliding system: Based on recirculating ball bearings, it offers precise, reliable and low-maintenance movement. Lubrication is done manually. Oscillation for sanding units: Ensures uniform finishing and prolongs the life of abrasive belts and sisal brushes. Efficient exhaust system: Each group has dedicated exhaust ports, connected to 8 Ø 100 mm outlets, keeping the work area clean and efficient. Fast side access: Large side openings allow easy brush changes and quick access for maintenance. Toothed belt transmission: Ensures constant speeds, stable transmission and low noise level during operation. Flexibility in finishing: The "fast release" system allows for quick changes of belts and brushes. The adaptable configuration is suitable for various styles and types of finishing. The DAS LDX 1000 – 6 machine is an efficient solution for manufacturers who want superior quality in the processing of profiled wood elements, with high productivity and impeccable finishing. Maximum working width 1000 mm Maximum working height 100 mm Longitudinal drum diameter (Ø) 220 mm Longitudinal drum drive motor power - oscillating 2 x 1.5 kW Longitudinal drum oscillation motor power 0.55 kW Oscillating pad diameter 200 mm Oscillating pad drive motor power 1.5 kW Pad oscillation motor power 0.18 kW Transverse drum diameter (Ø) 280 mm Transverse drum drive motor power 2 x 2.2 kW Advance motor power 1.1 kW Brush speed max. 1000 rpm Exhaust hood diameter (Ø) 4 x 100 mm Overall dimensions 3300 x 1600 mm Weight 1500 kg Technical support available in Romanian, English or German.

Condition: used, Year of construction: 2015, Working dimension X: 6.000 mm Working dimension Y: 1.400 mm Working dimension Z: 125 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 9 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis 5th axis: Aggregate interface HOMAG Flex 5 Plus interface: Yes Tool clamping system: HSK-F63, WFC 40 Tool changer positions: 28 Disc tool changer 8-fold: Yes Disc tool changer 14-fold: Yes Linear tool changer: Yes Tool changing auxiliary device: Yes Dob Ehjwf Nbhjlk Askl Number of exchangeable units: 1 HOMAG Flex 5 Plus aggregate: Yes Vertical drilling spindles: 21 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: 90° turnable Gantry machine: einseitig angetrieben Machine table: Pod and rail table Workpiece support aids: Yes Two rows of stops: Yes Electronic supervision of the end-position of the stops: Yes Stop for top layer protrusion: Yes HOMAG Lateral stop system PURE STOP: Yes Number of consoles: 12 Pneumatic pipe connectors: an den Konsolen 4-field processing: Yes Positioning aid: Yes Crosshair laser: Yes Vacuum pump: Yes Safety device: Safety mat Automatic central lubrication: Yes HOMAG ecoPlus: Yes WEEKE Quality package: Yes Handheld terminal: Yes Software: HOMAG WOODWOP 6.1, HOMAG, HOMAG MDE Conformity marking: CE mark

Condition: like new (used), Year of construction: 2022, operating hours: 50 h, Functionality: fully functional, BlueMax multi-spindle drill press in perfect condition and with accessories. Dkebowhbfwo Ehlk Asl It has been used very little. It can be delivered with the cabinet (see photo) and a stand-alone dust extraction unit (price not included).

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 3 h, Year of construction: 2021 Condition: as good as new (approx. 3 operating hours) Dkeb Esq H Sqdjhlk Ajl Technical specifications Roller carriage length 3200mm Cutting length 3400mm Cutting height max. 155mm at 90°, 105mm at 46° Cutting width width stop 1250mm Saw blade max. Ø 450mm Table size cast iron table top 1200 x 655mm Additional table extension 750 x 655mm Table extension 1430 x 940mm Table height +/-20?mm 900mm Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Net weight approx. 1150kg Technical description For trimming, cutting to length, formatting, mitre cutting etc. The complete saw shaft unit is dynamically balanced, double-guided swivel segments made of grey cast iron with double column guide for height adjustment and the long circular saw shaft with 2 ball bearings ensure absolutely smooth running. The double roller carriage with ball bearings is smooth-running and maintenance-free. Precise and backlash-free running over the full length, guided by hardened and ground round steel guides with remote locking in a 50 mm grid. Sturdy yet lightweight cross slide made of steel profiles with a support roller on the outer narrow side, cross slide widening on the wide side Length stop on the cross slide with mm scale and telescopic extension extendable up to 3500 mm; with 2 robust and backlash-free sliding stop flaps, 1 end stop with support for long strips; length stop can be used as an angle mitre fence on both sides, infinitely variable from 0° to 46° with mechanical length compensation; all common mitre angles (15°, 22.5°, 30°, 45°) can be quickly set using a fixing system. Electromotive width stop with cutting width 1250 mm to the right of the saw blade, dimension input on the control panel at the top via positioning control to 0.1 mm, stop can be folded down for free table surface; Safety cut-off bar between width stop and roller carriage in case of crushing hazard With pull-out tool drawer Top operation with control panel positioned at eye level, swivelling, incl. Including template holder and with 7" touchscreen control for cutting height, swivelling adjustment and speed Electromotive height and swivelling adjustment via positioning control Swivelling range of the saw blade from 0° - 46° Digital displays for degree setting, cutting height, speed and cutting width APA saw blade quick-clamping system Safety guard can be swivelled to both sides, Protective cover with interchangeable wide/narrow insert Push-button control with electronic soft start (start/stop) Electronic, wear-free motor brake Saw blade Ø 400mm can be lowered under the table Extraction nozzle Ø 120mm on the machine body, Ø 80mm on protective hood CE conformity GS tested Length stop analogue Cross slide standard Cutting length 3400 mm Three-phase motor 5.5 kW Width stop 1250 mm electromotive Scoring unit 1750 0.55 KW (0.75 HP) With manual height and side adjustment via external handwheels externally mounted hand wheels With saw blade quick clamping system APA Quickstep scoring system Tool-free manual adjustment adjustment of the scoring width From 2.8 to 3.8 mm with 0.05 mm grid adjustment per single step, incl. 1 Set of saw blades 125 x 2.8 - 3.8 x 50mm | Z = 12+12 Replacement HM scoring saw blade 125 x 2.8 - 3.8 x 50 mm Z = 12+12 (set = 2 pieces) for QuickStep scoring system

Condition: new, Year of construction: 2025, Functionality: fully functional, feed length X-axis: 2,100 mm, feed length Y-axis: 3,000 mm, feed length Z-axis: 300 mm, High-performance CNC router – the complete solution for wood and composite materials processing The CNC router 2130 ATC Master Drill NEST is designed for efficient processing of solid wood doors, furniture fronts made of chipboard, MDF or other similar materials. Equipped with a powerful 9 kW air-cooled motor, it allows for high-quality finishes and cutting at speeds of over 18 m/min. Solid and durable construction The 10 mm steel base provides stability, and the HIWIN industrial sliding system with 30 mm rails and recirculating balls ensures precision and speed in any working position. The clamping of the parts is carried out by vacuum, and the centralized lubrication system reduces wear and maintenance. Automatic performance and high productivity The automatic loading and unloading table, together with the adjustable 3-piston loading device and the material pushing system, optimizes work cycles. Optical sensors automatically detect the presence of plates, reducing errors and downtime. Advanced precision and versatility The drive system on the X and Y axes with bevel gear and rack, and on the Z axis with ball screw, guarantees smooth movements and total control. The linear tool magazine with 8 or 12 positions, pneumatically operated, allows for quick cutter changes, increasing process efficiency. Intelligent control and compatibility The NC Studio control unit is easy to use and compatible with most CAD/CAM software. Precise spindle adjustments and automatic tool measurement contribute to accurate machining, even in continuous mode. Essential Auxiliary Equipment Multi-operation Drilling Unit Impact and vibration resistant polyamide table Double piston reference limiters Efficient exhaust hood Strategically placed emergency buttons Key Benefits: Fast and quality machining with minimal personnel Low maintenance and extended service life Fully automated system for maximum efficiency Dkebewhbpps Ehlk Ajl This CNC router is part of the ATC Drill NEST series and is ideal for modern workshops looking for speed, precision and automation in the production of furniture, doors or decorative panels. Available in the 2128 ATC Drill NEST, 2140 ATC Drill NEST, 2145 ATC Drill NEST variants. Flexibility in configuration gives you full control over the machine model required for your business. Manufacturer DANIBRUM – Romania Working surface X - Y 2100 x 3000 mm Height stroke 300 mm Milling motor power 9 kW Maximum working speed 24000 rpm Motor cooling mode Air Converter yes Hiwin linear guide 30 mm Height adjustment - Z axis TBI 2502 ball screw Basic system with controller NC STUDIO Supply voltage 400 V – 3 Phase – 50 HZ Technical support available in Romanian, English, German.

Condition: good (used), The stationary compact dust extractors of the MOBEX-P series are suitable for extracting dry and free-flowing dust. Extractors can be used in almost all industries for single and multi-part workstations, such as circular saws, grinding and milling machines, etc. Up to 4 suction points can be used at the same time. The devices are based on an innovative housing concept, with a patented drive system, optionally equipped with IFA-tested versions. Areas of application: - In case of exhausting one or more workstations Djb Ejpcgxwshlk Aokl - Sawing, cutting - Grinding, polishing - Machining, milling Powder types: - Metal powder - Metal shavings - Plastic powder Advantages: - High suction power - Preselection system - Jet-Pulse filter cleaning

Condition: new, Year of construction: 2025, Functionality: fully functional, input voltage: 400 V, spindle speed (min.): 18,000 rpm, spindle speed (max.): 2,800 rpm, mount diameter: 300 mm, feed length Y-axis: 1,800 mm, Two-station CNC lathe – Efficiency, precision and productivity in the processing of cylindrical parts The CNC lathe with 2 working units and numerical control is a modern solution for the processing of wooden parts with a cylindrical shape – such as columns, table legs or decorative elements – offering accuracy, repeatability and efficiency in any workshop or factory. Double performance with independent units Equipped with two working units that operate simultaneously or independently, the lathe allows the rapid processing of parts up to 1200 mm. It is ideal for the series production of furniture components, church elements or artistic objects. Solid construction for durability The welded frame made of rectangular profiles, heat-treated, provides stability and torsion resistance. Linear guides on the X, Y and Z axes ensure precise, vibration-free movement. Precision through numerical control Hybrid servomotors, together with the rack and pinion system, guarantee precise positioning and efficient control on all axes. The manually adjustable tailstock with four clamping points stabilizes the parts during complex operations. Advanced motors and cooling Water-cooled motors allow operation at speeds of up to 18,000 rpm without overheating, ensuring a constant work rate and an extended service life. Intelligent DSP control The DSP control unit with internal memory allows for quick file import, project resumption from the stopping point and real-time parameter adjustment – ideal for a continuous and efficient production flow. Precision and maintenance auxiliary systems Self-centering chucks firmly fix the parts, while optical sensors and an automatic lubrication system ensure precision and low maintenance. Key advantages Perfect repeatability, even for large production runs Flexibility in operation with independent work units Robust construction and energy efficiency This CNC lathe is designed to deliver consistent performance, high quality and adaptability in woodworking, making it the ideal choice for modern workshops or furniture factories that aim to optimize production processes. Maximum working length 1200 mm Dkjb Eewhbguohlk Ael Maximum working diameter (Ø) 300 mm Number of work units 2 pcs Control DSP Workpiece rotation speed 0 – 2800 rpm Motor power 4.5 kW Mill speed 18000 rpm Inverter “BEST” inverter Drive motors Servo motors – Hybrid Maximum feed 50 mm/ s Accuracy 0.0125mm