Condition: used, Year of construction: 2011, Tenoning spindle 1 Stk Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2784 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please inquire about additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3 kW > Adjustment range: radially pneumatically controlled to 8 positions, e.g., for edge rounding from above > Laser alignment light for detecting the sawn section Dcelranjwamqvsbrsg Item 2: Rounding unit, horizontal, bottom ----- > Position: horizontal, bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm mm > Spindle speed: 9,000 rpm > Maximum tool travel: 130 mm > Axial adjustment range mechanically coupled to cross-cut saw > Radial adjustment range pneumatically controlled on/off Length stop NC-controlled ----- > Length 3,500 mm > Electronic length stop Item 3: Tenon and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 3,500 rpm > Maximum tool travel: 320 mm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Item 4: 1st Profiling Spindle (Cylinder and Counter-rotation) ----- > Position: vertical right > Number of tools: 1 > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW Item 5: 2nd Profiling Spindle ----- > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, continuously adjustable, NC- controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Maximum tool travel radius: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatically controlled opposite the spindle, 2 positions Rung guide consisting of: Guide ruler in the stop (concurrent spindle area), Rung support bar from above in the area of ??the profile milling unit vertically on the right, and profiling spindle. Item 6: Profile milling unit, horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.8 kW > Speed: 9,000 rpm > Max. tool travel: 130 mm > Axial adjustment range: 30 mm, 8 positions > Radial adjustment range: 125 mm, 8 positions Item 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range: 115 mm, 8 positions > Radial adjustment range: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool travel: 210 mm > Motor power: 3.8 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.8 kW > Tool clamping length: 125 mm > Axial adjustment ra...

Condition: excellent (used), CATALOG NUMBER 7642 Technical data: - max. blade diameter 350mm - blade hole diameter 30mm - blade guard - max. cutting height 100mm - max. cutting width 600mm - possibility of cutting at an angle in the vertical plane +90°/-90° (arm movement or blade movement) - possibility of rotating the arm right/left +/- 45° Dolraewhfd Rjnbrecg - 2.2kW engine - roller table 2070x620x1000mm - diameter of the exhaust port 2x80mm - tabletop dimensions 810x1020mm - dimensions length/width/height 1150/1060/1580mm - weight about 230kg ADVANTAGES - very good condition - Polish production - unpainted - used saw Net price: 6900 PLN Net price: 1620 EUR depending on the price 4.25 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, working width 950mm Dslranbewhfd Dorjcg combi unit with rubber roller and shoe shoe pneumatically fitted pneumatic oscillation controlled by photocells Two conveyor feed speeds year of production 2009 power supply 400V weight 660 kg

Condition: excellent (used), OMGA TI88 muntin tenoner Description in the photo Machine available on request Dcolranbswhd Tdersg

Condition: used, Year of construction: 2012, Working dimension X: 3.280 mm Working dimension Y: 1.320 mm Working dimension Z: 170 mm Number of milling spindles: 1 Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changer positions: 22 Linear tool changer: Yes Disc tool changer: Yes Number of exchangeable units: 4 Vertical drilling spindles: 10 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction Lock recess milling aggregate: Unit, changeable Cantilever machine: Yes Machine table: Pod and rail table Number of consoles: 6 Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 90 m³/h Safety device: Safety mat Two rows of stops: Yes Workpiece support aids: Yes Handheld terminal: Yes Control: BIESSE BH 660 Software: BIESSE BIESSEWORKS Dcjlranbjwhfdqjrjg

Condition: good (used), Code: 0110 Brand: OMS SALVARANI Model: FC 350 R - CE Standard Crosscutting machine with base frame for wood, aluminium, PVC, plastic, etc. - CE Standard Technical data Blade diameter mm 350 Dcelranowhffzjbrog Three-phase motor Watt 2800 - Rpm 3000 Cutting capacity height mm 145 Cutting capacity width at 45 degrees mm 113 Cutting capacity width at 90 degrees mm 160 Base complete with suction Overall dimensions mm 800 x 600 x 1500 h Weight kg 90

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Delranbov Uq Tlsrjcg Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)

Condition: good (used), Year of construction: 2019, Horizontal Band Sawmill NEVA Type RE-MAX 500 CNC Cast iron saw construction Hydraulic saw blade tensioning Main motor 22 kW Power supply 3 x 400 V, 50 Hz The saw processes wood up to a width of 330 mm Material processing height up to 140 mm Minimum cutting height: 2 mm Cutting width: 1.1–1.3 mm Dcslranswhdxgjbrsg Dust extraction: 160/100 mm Air pressure: 6 bar, Compressed air consumption: 2–10 m³/h Machine dimensions (L x W x H): approx. = 2300 x 2806 x 2448 mm Weight: 4500 kg The saw is 6 years old, has been operated in single-shift operation, and is in good condition. The saw has been regularly serviced (wheel camber, bearing replacement, etc.). INCLUDES 2 new conveyor belts INCLUDES workpiece return transport system as shown in the video NEW PRICE 2019 - without return transport approx. EUR 61,000

Condition: excellent (used), Working width: 500 mm 4-knife cutterhead Table length: 2690 mm Fence with angle adjustment Star-delta start Dolranbewhdvxjrscg

Condition: used, Year of construction: 2023, Longitudinal traversing range: 33 m Crosswise traversing range: 13,5 m Number of rows max: 3 Places per row max: 10 Stack height max: 2.000 mm Workpiece width max: 2.100 mm Workpiece width min: 700 mm Workpiece length max: 4.200 mm Workpiece length min: 1.600 mm Load capacity: 150 kg Dslranbewhfc Tjrjcg Feedrate max: 180 m/min Infeed roller conveyor: Yes Raised storage level: Doppelstocklager Vacuum lifter: Yes Turning device: Yes Management of residual parts: Yes Adjustment to panel size: Yes Labelling: Yes Control: PC control Control cabinet cooling: Yes Total connection: 18 kW

Condition: used, Number of spindles 4 St. Number of tools 11 St. Spindle diameter 50,40 mm Spindle length 285,125 mm length 4000 mm width 2000 mm height 2200 mm Weinig Univar 10/3 folding machine ----- For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjustable for both tool positions from the operator side. Central lubrication for the spindle units. The 1. Spindle can be selected in right-left rotation. This spindle dips the last 100 mm of each frame end appropriate synchronization tool into the passing wood. Through this This prevents the tool of the subsequent milling spindle from running in the opposite direction working, causing tearouts. Excavation of the first 7 transport rollers using Footswitch. This shortens the lead time. An additional The support rail also allows large-format frames to be milled around. Continuous, chainless rubber roller feed with extreme short roller spacing. Height adjustment of the feed bar electrically readable. Electrical version according to VDE. Machine including operating tools, but without processing tools tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1. Profiling spindle (synchronous and counter-rotation) ----- -- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm with synchronous automatic immersion 2. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm Dslranbovnv Uuerjcg 3. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 4. Profile spindle - fitting unit on the right ----- For milling the fitting groove in the milling cycle or for grooving in the longitudinal profile. Pneumatic horizontal movement with Selector switch in the control panel. Motor 2.2 KW Speed 6,000 rpm Spindle diameter 40 mm Clamping height 125 mm, 2 tools Tool flight circle min. 140 mm, max. 180 mm Motor power feed 1.1 kW Feed speed 6 - 12 m/min. ...

Condition: excellent (used), Functionality: fully functional, overall weight: 10,600 kg, Shelf length 3700mm Shelf width 1300mm Water heating 10 hydraulic cylinders Piston diameter 100mm Clearance between shelves 260mm Weight - 10600kg Maximum pressure 200 BAR Dslranswhduzsbrecg Ability to work on 6 or 10 pistons Possibility of dismantling the middle shelf (Clearance 570mm)

Condition: used, Year of construction: 2019, Sanding width: 1.350 mm Workpiece thickness min: 4 mm Passage height max: 170 mm Sanding aggregates total: 2 Sanding rollers: 2 Steel roller: Yes Combination unit: 1 Sanding pads total: 1 Vacuum table: Yes Doljwhfc Heranbrocg Sensing of workpiece thickness: mechanical Main motor power: 11 kW Feedrate max: 9 m/min Blow-off device: Sanding belt Configuration of aggregates: r-c-u Side of belt change: Left Protection against workpiece over-thickness: Yes Control: B&R Power Panel Conformity marking: CE mark Weight: 2.060 kg Space requirement Length: 2 m Space requirement Width: 1,9 m Space requirement Height: 2,4 m

Condition: new, Bore diameter variabel mm Number of heads horizontal 3 St. Number of heads vertical 4 St. Dimensions (L/W/H) 6100x1500x2300 mm Weight 950 kg 1 NEW drilling and milling center Götzinger Power Drill 300 With the Götzinger PowerDrill you can, depending on the type and design: - Drill on the front and on the long side - Dowels of front doors, pegs, fighters - The drilling patterns are freely programmable - You can drill: handle slides and corner bearings, with quick-change multiple spindle - You can: Milling lock case, pusher and PZ as well as 3D belts and drill - The machine has a horizontal and a vertical milling unit - A simple control lets you create drilling and milling programs, save and call again Base frame in sturdy design, covered with sheet metal Table top 1800 x 200 mm Processing unit: X-axis - 500 mm working travel Y-axis - 0-120 mm Z-axis - 0-105 mm (above table) Horizontal aggregates: 1 horizontal drilling unit (dowel drilling unit left) ----- Drilling motor 220 V, 1.1 kW Collet holder ER 25 4,000 - 11,000 rpm adjustable 1 milling unit horizontal for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 horizontal drilling unit (dowel drilling unit right) ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 Vertical aggregates: 1 drilling unit vertical ----- Drilling motor 1100 W, infinitely variable 4,000 - 11,000 rpm, with collet holder ER 25 1 boring unit vertical - with quick-change boring head ----- Drilling motor 1,1 KW, 3,000 rpm Dcolranbeif Az Uorsg Included: 1 boring head BKF 2/3, for corner bearing incl. Drill set, quick-change ----- On loose item, drill assembly to customer fitting 1 boring head BKF 3, for olive incl. Drill set, quick-change ----- On loose item, drill 1 cubo d = 25, 2 x dowel d = 10 1 milling unit vertical for lock case ----- Milling motor 2.2 kW Speed ??controllable 3,000 - 16,000 rpm Collet holder ER 25 1 piece length stop right and left, usable length 2.7 m, NC controlled Control: electro-pneumatic with three-axis NC positioning controller and integrated machine function Input via TFT display, 10 "color Machine complete, CE-compliant, with 1 set of drilling tools, DÜBO each 1 x d = 6,8,10,12 + 2 roughing cutters d = 16, ready for connection Loading dimensions: Machine L x W x H = 2.50 x 1.50 x 2.30 m, weight 850 kg Length stop L x W x H = 6.00 x 0.30 x 0.30 m, weight 100 kg ----- Total price in above mentioned version, ex works: on request Plus freight and installation / instruction (Technical information according to the manufacturer - without guarantee!)

Condition: excellent (used), Year of construction: 2001, working width 410mm tables lenght 2630mm 4-knives shaft motor with brake horizontal drill included drill table 250x570mm year 2001 Dcjlrehqrxmsanbreg

Condition: used, Year of construction: 2022, Cutting length: 4.300 mm Pusher stroke: 4.300 mm Number of grippers: 10 Feedrate max: 120 m/min SCM HIGH SPEED: Yes Continuously variable feed: Yes Saw blade projection: 80 mm Saw blade diameter max: 340 mm Main motor power: 9 kW Scoring saw: Motoric adjustment Groove cutting function: Yes Labelling: manually For sensible workpieces: Clamping pressure adjustable Stop side: Left Optimization: Yes Workpiece width measuring: Yes Workpiece length measurement: Yes SCM Saw Set: Yes Control: SCM eye-M Software: SCM MAESTRO ACTIVE, SCM MAESTRO CONNECT, SCM MAESTRO CUT MANAGER, SCM MAESTRO CUT EDITOR, SCM MAESTRO CUT UTILITY, SCM MAESTRO OTTIMO CUT, SCM MAESTRO OTTIMO IMPORT, SCM MAESTRO PATTERN Dcelranjwhfctjbrog Conformity marking: CE mark Weight: 4.250 kg Space requirement Length: 7,1 m Space requirement Width: 6,4 m

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 3 kW Feed speed 5-24 m/min. total power requirement 27 kw Dimensions (L/W/H) 3900 x 2200 x 2000 mm weight of the machine ca. 2500 kg Weinig four-side planer Profimat 23 window version with glazing bead removal, ATS control and program control ----- Machine will be checked ! Technical data summary (please inquire about any additional accessories included) ----- Generally ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pieces. > Dressing table length: 2500 mm > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom Dcelraou Su Hujnbrjg > Spindle 2: right, pneumatically clocked up-down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: Glass bead saw pneumatically up and down Spindle description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: Glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glazing bead removal > ATS control, automatic 2-axis positioning for width and height (left and upper spindle) with program memory 99 programs > Machine operation: window package Joint control of the right spindle and the glazing bead removal via manual selector switch in the control panel > Spindles with mechanical digital display Option: used planer heads (technical data according to the manufacturer - no guarantee!)

Condition: excellent (used), working width 530mm 4-knives shaft Tersa tables length 2730mm angle regulation of fence Delrehqrxfeanbrocg motor power 4kW CE

Condition: used, Year of construction: 2022, Sanding width: 1.350 mm Workpiece thickness min: 4 mm Passage height max: 170 mm Sanding aggregates total: 2 Sanding rollers: 2 Steel roller: Yes Combination unit: 1 Sanding pads total: 1 Polishing aggregate: Scotch Brite Vacuum table: Yes Vacuum fan: Yes Sensing of workpiece thickness: mechanical Main motor power: 18,5 kW Adjustable sanding belt speed: continuously variable Aggregates with frequency inverters: 1 Feedrate max: 9 m/min Continuously variable feed: Yes Blow-off device: Sanding belt Doljwhfcmjranbrocg Configuration of aggregates: r-c-u Side of belt change: Left Control: SCM eye-S Conformity marking: CE mark Weight: 2.060 kg

Condition: excellent (used), Year of construction: 2008, working width 510mm 4-knives shaft tables length 2250mm motor power 7,35kW Delranoh R S Uzobrscg angle regulated fence year 2008 iron cast tables

Condition: used, Year of construction: 2022, Working dimension X: 5.020 mm Working dimension Y: 1.680 mm Working dimension Z: 170 mm Number of milling spindles: 1 Milling spindle liquid-cooled: Yes Blow-off device: Yes Main motor power: 12 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis 5th axis: 5-axes spindle SCM 5-axes spindle PRISMA KT: Yes Tool clamping system: HSK-F63 Tool changer positions: 28 SCM Tool changer RAPID 16: Yes SCM Tool changer TR 12: Yes Vertical drilling spindles: 18 Horizontal drilling spindles in X: 4 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction SCM Drilling aggregate F 26 L: Yes Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Pod and rail table Workpiece support aids: Yes Three stop ranges: Yes Number of consoles: 8 Self-adjusting machine table: Yes SCM Machine table MATIC: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Delranowhfcgebrjcg Capacity vacuum pump: 250 m³/h Special workpiece clamping system: For windows Anzahl Sonderspanner: 4 Barcode reader: Yes Safety device: Bumper, Light barrier Chip conveyor: Yes Interface for .dxf data: Yes Tool charge measurement: Yes Remote control: Yes Control: SCM eye-M PRO Control cabinet cooling: Yes Software: SCM MAESTRO ACTIVE CNC, MICROSOFT WINDOWS 10 Conformity marking: CE mark

Condition: ready for operation (used), Suction capacity (max.) - 1500m3/h Negative pressure - 1450Pa Djlswhdprjranbrjcg Filter surface - 1.5 m2 Volume of waste bags - 120l Connection diameter - 125mm Power supply - 400V Motor power - 1.1 kW Noise level - 78 dB Weight - 40kg Height - 2080 mm Width - 480 mm Length - 950 mm

Condition: used, Year of construction: 2022, Working dimension X: 3.117 mm Working dimension Y: 2.177 mm Working dimension Z: 150 mm Number of milling spindles: 1 Blow-off device: Yes Main motor power: 14 kW Rotation speed max: 24.000 rpm Tool clamping system: HSK-F63 Tool changer positions: 18 SCM Tool changer FAST 18: Yes Tool changing auxiliary device: Yes Vertical drilling spindles: 13 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction, 90° turnable SCM Drilling aggregate F 23 LR: Yes SCM : Yes Gantry machine: beidseitig angetriebene Gantrymaschine Machine table: Matrix table SCM Machine table HE Multi function table: Yes Multi-zone vacuum: Yes Dynamic vacuum: Yes Anzahl Vakuumzonen: 8 Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 500 m³/h Suitable for nesting: Yes Feeding: Vakuum-Einzugsvorrichtung, Panel storage system Outfeed: discharge unit Safety device: Bumper, Light barrier SCM Pro-Speed: Yes Interface for .dxf data: Yes SCM TecPad: Yes Automatic central lubrication: Yes Tool charge measurement: Yes SCM S-N-D three-position selector switch: Yes Control: SCM eye-M PRO Control cabinet cooling: Yes Dcolranswhfcasbrsg Software: SCM MAESTRO ACTIVE, SCM MAESTRO CONNECT, SCM MSL, SCM NESTING FREE-FORM, MICROSOFT WINDOWS 10 Conformity marking: CE mark

Condition: used, Year of construction: 2022, Workpiece return: Conveyor belt Edgeband thickness max: 3 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Continuously variable feed: Yes Electromotoric height adjustment: Yes Top pressure by belt: Yes Places in coil magazine: 24 Glue system granulate: Premelting unit SCM Glue system QMS-P Premelter: Yes Quick-change glue pot: Yes SCM Glue system SGP Smart Glue Pot: Yes Suitable for PUR glue: Yes PUR Aufschmelzeinheit: interner PUR-Aufschmelzer SCM Glue system PU BOX L: Yes Spraying device: Yes SCM Spraying device AAP: Yes SCM Spraying device AAR Anti-adhesive spray unit: Yes Spraying device Cleaning agent: Yes Premilling unit: Yes SCM Premilling unit RT-X: Yes SCM Edsystem: Yes Preheating zone: Yes Andruckzone NC-gesteuert: Yes Trimming saw: 2 motors SCM Trimming saw YU/SP 1000: Yes Flush/radius/chamfer milling units: 2 SCM Flush milling unit R-E: Yes SCM Edsystem: Yes STEFANI Fine milling unit RSU-E: Yes SCM Multi Edge: Yes SCM Edsystem: Yes Corner rounding unit: 4 motors SCM Corner rounding unit ROUND 4: Yes SCM Multi Edge: Yes Nutfräsaggregat: Universalfräsaggregat schwenkbar, Zwei Aggregate SCM Grooving unit MX 80: Yes Scraper unit: Profile scraper, Flat scraper SCM Scraper unit RC S-E: Yes SCM Multi Edge: Yes SCM Scraper unit RC-E MULTILEAF: Yes Buffing unit: Yes SCM Buffing unit SP F: Yes Finishing aggregate: Hot air Suitable for nesting: Profile scraper, Bündig/Radius/Fasestationen Aggregates actuated by control: NC-axes Profilwechsel automatisch: Bündig/Radius/Fasestationen, Profile scraper, Eckenkopieraggregat Type: left-side machine Infeed automatically: Yes Batch size 1: Yes Barcode reader: Yes SCM Easy Size: Yes Control: SCM eye-M Control cabinet cooling: Yes UPS - Uninterruptible Power Supply: Yes Software: SCM MAESTRO ACTIVE EDGE Conformity marking: CE mark Djlewhfb Noranbrscg

Condition: used, Year of construction: 2020, Workpiece return: Conveyor belt Edgeband thickness max: 12 mm Panel thickness max: 60 mm Thickness of coiled edgeband max: 3 mm Feedrate max: 20 m/min Continuously variable feed: Yes Glue system granulate: glue pot above feeding chain Magazine for single strips: Yes Spraying device: Yes Premilling unit: Yes Preheating zone: Yes Trimming saw: 2 motors Flush/radius/chamfer milling units: 1 Corner rounding unit: 2 motors Scraper unit: Profile scraper, Flat scraper Buffing unit: Yes Aggregates actuated by control: NC-axes Type: left-side machine Machine length: 6.055 mm Djlrewhfb Aoanbrjcg Infeed barrier: Yes Control: SCM eye-M Conformity marking: CE mark Weight: 2.820 kg