Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 5 h, cutting height (max.): 490 mm, cutting width (max.): 750 mm, roller diameter: 540 mm, pivoting range: 60 °, Like-new machine with only 5 operating hours! TECHNICAL DETAILS Cutting width: max. 750 mm Cutting height: max. 490 mm Roller diameter: 540 mm Swiveling range: 60° Table height: 800 mm Cutting diameter at 90°: max. 540 mm Rectangular cutting area at 90°: 750 × 490 mm Swiveling range: up to 60° in both directions Saw blade dimensions: 6,880 × 41 × 1.3 mm Saw blade speed: 15–150 m/min Drive power: 5.5 kW Speed: max. 150 rpm Speed: min. 15 rpm Type of operation: electric MACHINE DETAILS Control type: PLC-controlled Input voltage: 400 V Bsdpfj Aggc Iex Aknsww Input frequency: 50 Hz Input current type: three-phase Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,500 x 2,000 mm Total weight: 2,370 kg Operating hours: 5 h EQUIPMENT Lighting Documentation / Manual CE marking

Condition: good (used), Year of construction: 2010, Ref. -No.: 10602 Manufacturer: DANOBAT Type: CR 330 Year of construction: 2010 Type of control: Digital Control: Digital Storage location: Halberstadt Country of origin: Germany tape length: 2438 mm capacity: 330 mm Speeds: 14-105 m / min Vice opens: 345 m / min traverse: 500 mm engine: 3 kW Bodpfx Ao Ahmvbjknjww Width: 1727 mm Height: 1878 mm Weight: 1750 kg Further information: The machine can be viewed while powered up.

Condition: like new (used), Year of construction: 2025, machine/vehicle number: 5401511001, functionality: fully functional, operating hours: 25 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 800 mm, control type: CNC control, roller diameter: 540 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, PEGAS-GONDA 540 HORIZONT X-CNC-M | CNC | MIRROR VERSION | SAVE 44% EXCLUSIVE CNC DEMONSTRATION MACHINE – LEFT-HAND MATERIAL FEED – DIRECTLY FROM THE MANUFACTURER! We are selling a fully automatic two-column bandsaw, PEGAS-GONDA 540 HORIZONT X-CNC-M, directly from our showroom. M = MIRROR (MIRROR VERSION) This special version of the 540 HORIZONT X-CNC features a mirrored material feed: the material is fed from the LEFT instead of the usual right side. The perfect solution for production halls where the spatial conditions do not allow for material feed from the right! The machine offers complete CNC control for angular positioning, material feed, and sawing process. Demonstration machine, not used in regular production. Sale due to the renewal of our showroom equipment. SPECIAL PRICE – 44% SAVING! List price: 105,299 EUR Our price: 59,000 EUR plus VAT. You save 46,299 EUR! TECHNICAL DATA Model: 540 HORIZONT X-CNC-M (MIRROR) Fully automatic CNC two-column bandsaw Material feed from the LEFT CNC-controlled angle adjustment: ±45° Round cut at 90°: 540 mm Rectangular cut at 90°: 750 × 490 mm Saw band: 6880 × 41 × 1.3 mm Band speed: 15–150 m/min Main motor: 5.5 kW Weight: approx. 3,875 kg SIEMENS SIMATIC S7-1500 PLC SIEMENS TP700 Comfort Touchscreen CNC-controlled material feed Feed stroke: 2,000 mm Multiple feed: up to 19,999 mm Servo-controlled saw feed Automatic cut adjustment (ASR) Up to 100 cut programs 6 MONTHS MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of a recognized warranty claim, the buyer only bears the travel and transportation costs. Service rates: Travel costs: 1 EUR/km (round trip) Travel time: 25 EUR/hour Technician work: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Price: 59,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Immediately available! We offer transport to the customer, commissioning, and operator training for an additional fee, according to our service rates. ORIGINAL ACCESSORIES A wide range of original accessories are available (see accessory price list). We recommend matching PEGAS-GONDA roller conveyors for the left-hand material feed. We will gladly prepare an offer for a complete sawing station. YOUR ADVANTAGES: Special MIRROR version with left-hand material feed Fully automatic CNC operation Directly from the manufacturer 46,299 EUR price advantage 6 months warranty Original manufacturer service Bsdpfxs Aa Dmvj Akneww Immediately available Contact us for a viewing or further information! PEGAS-GONDA – directly from the manufacturer.

Condition: used, Year of construction: 2008, machine/vehicle number: .080356001, with miter cut, roller feed, and pneumatic clamping. Bwsdpfxo Af Nk No Aknew

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1424140083, Elumatec sawing machine SAS 142/141 with dust extraction system Year of manufacture: 2008 Cutting accuracy: 0.5-0.6 mm Dust extraction system: Year of manufacture: 2008 For sale only to dealers and commercial businesses. Bsdpfez Rpgwox Aknjww Due to the age and operating hours, no guarantee or warranty is provided.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: three-phase, Equipment: CE marking, documentation/manual, FMB PEGASUS VHZ semi-automatic bandsaw Year 2017, CE certified Blade rotation via inverter Cutting angle from 0 to 60° to the right Bwjdps Af Nd Rjfx Aknow Round cutting capacity: 330 mm Square cutting capacity: 330 mm Rectangular cutting capacity: 330 x 510 mm Blade: 4210 x 34 x 1.1 mm Rotation speed: 16 - 120 mm/min Motor power: 0.3 kW Weight: 870 kg

Condition: good (used), Year of construction: 2008, machine/vehicle number: 1008360, Offer 26291 Technical data: - Cutting range at 90°: - Round: 310 mm - Flat: 520 x 310 mm - At 45° left, flat: 350 x 310 mm - At 30° left, flat: 230 x 310 mm - At 45° right, flat: 260 x 310 mm - Miter adjustment, left and right - Smallest material dimensions, round/flat: 10/10 x 8 mm - Smallest cutting length: 40 mm - Digital miter angle display - Saw blade dimensions: 5000 x 34 x 1.1 mm - Cutting speed, continuously variable: 20 - 140 m/min - Cutting pressure, continuously adjustable: 0 - 10 m/min - Hydraulic material clamping system with tension pressure regulation - Bundle clamping device Bsdpfx Akj Ahniconoww - Micro-spray coolant system - Total drive power: 400 V / 6.0 kW - Space requirement: approx. W 3000 x H 1600 x D 1750 mm - Weight: approx. 1900 kg - 9 pieces of height-adjustable infeed and outfeed roller stands

Year of construction: 2018, condition: ready for operation (used), Metal Band Saw manufactured in 2018. This Pilous ARG 640 DCT SAF features a cutting range of Ø 640 mm for round materials and 550 mm for square materials at 90°. It offers continuous angle setting for miter cutting from 90° to 60° left. With a robust design and a total weight of approximately 4200 kg, this machine is ideal for various cutting applications. If you are looking to get high-quality cutting capabilities, consider the Pilous ARG 640 DCT SAF machine we have for sale. Contact us for further details. Bwsdpfxe Ahx R Is Aknow - Total Connected Load: 8.80 kW - Main Motor: 400 V / 50 Hz, 7.5 kW - Hydraulic Motor: 400 V / 50 Hz, 0.37 kW - Cooling Pump Motor: 400 V / 50 Hz, 0.12 kW - Connected Voltage: 3 × 400 V - Mains Frequency: 50 Hz - Hydraulic Pressure Max.: 70 bar - Coolant Tank Capacity: 70 Litres - Saw Band Dimensions: 8100 × 54 × 1.6 mm - Saw Blade Angle: 5° to the vice table surface - Saw Band Speed: 15–90 m/min (infinitely variable via frequency converter) - Cutting Range at 90° Round: Ø 640 mm - Cutting Range at 90° Square: 550 mm- Cutting Range at 90° Rectangular / Flat: 1100 × 550 mm - Cutting Range at 45° Round: Ø 640 mm - Cutting Range at 45° Square: 550 mm - Cutting Range at 45° Rectangular / Flat: 710 × 550 mm - Cutting Range at 60° Round: Ø 375 mm - Cutting Range at 60° Square: 375 mm - Cutting Range at 60° Rectangular / Flat: 375 × 550 mm - Miter Cutting Range: Continuous angle setting 90°–60° left - Vice Working Height: 800 mm - Machine Dimensions (Min.): 2050 × 3800 × 2500 mm - Machine Dimensions (Max.): 2700 × 3800 × 2700 mm - Total Machine Weight: 4200 kg – 4300 kg

Condition: used, Year of construction: 2016, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 325 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30 °, actuation type: hydraulic, total height: 1,400 mm, total length: 2,050 mm, total width: 1,300 mm, overall weight: 910 kg, table height: 76 mm, Equipment: CE marking, documentation/manual, Bandsaw machine MEBAswing 320 G-HSS Year of manufacture: 2016 Cutting capacity, round at 90 degrees: Ø 325 mm / at 45 degrees: Ø 300 mm Cutting capacity, flat at 90 degrees: 500 x 300 mm / at 45 degrees: 300 x 300 mm Saw blade speed 15-150 m/min Saw blade dimensions 4200 x 34 x 1.1 mm Connection: 400V 3-phase Total power requirement 3 kW Dimensions L x W x H: 2050 x 1300 x 1400 mm Weight 910 kg Bedpfoz I Ig Nsx Aknjww Standard equipment: Quick mitre adjustment from 90° to 30° in increments of 0.5° accuracy according to the scale. The mitre pivot point is the intersection between the saw blade and the material support, thus there is no change in the length dimension. At every angle setting of the saw frame, the material is clamped parallel at 90°. Coolant system with electric submersible pump Machine stand with chip collection tray Precise saw blade carbide roller guide, saw blade brush MEBA high-performance package, "HSS" version: Hydraulic raising and lowering of the saw frame and hydraulic clamping of the sawing material. Infinitely adjustable hydraulic cutting pressure and feed rate. Display of lowering speed on a scale. Display of cutting pressure on a manometer. Rapid lowering of the saw frame via push button to the material edge Frequency-controlled AC drive 15-150 m/min, 3 kW Hydraulic raising and lowering of the saw frame Including special equipment: Micro-dosing system: Economical and clean sawing: Minimum quantity lubrication with high-performance spray oil for dry chips without droplet formation. Ideal for tubes and profiles. Switching from coolant function to micro-spray nozzle. Compressed air connection required. Laser light for cut line indication/marking saw: Projects the cut line onto the sawing material and indicates the cutting channel. The workpiece can be manually aligned for a saw cut based on the marking. Clamping pressure adjustment at a fixed control panel: The clamping pressure can be manually adjusted via a pressure reducing valve. The applied pressure can be read on the corresponding manometer (in bar). Material stop 0-800mm 3 roller supports 6 new bandsaw blades High-performance spray oil Saw blade brushes

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, control type: manual, total height: 1,400 mm, total length: 1,640 mm, total width: 750 mm, overall weight: 295 kg, table height: 900 mm, Equipment: CE marking, cooling unit, lighting, Technical specifications: Bevel cutting on two sides, Cutting speed: 40/80 m/min, Motor power: 0.9/1.4 kW; 400 V / 50 Hz, Machine dimensions (L x W x H): 1640 x 750 x 1400 mm, Machine weight: 295 kg, Saw blade dimensions: 2710 x 27 x 0.9 mm, Working height: 900 mm, Cutting range (90°): Ø 235 mm (300 x 200 mm), Main motor: 400 V, 50 Hz, 0.9/1.4 kW, Pump motor: 400 V, 50 Hz, 0.05 kW, Belt speed: 35/70 m/min, Vice working height: 900 mm, Coolant tank capacity: approx. 15 l. Bodpfx Asz Tdcxeknsww The saw is in very good technical condition and can be tested at our warehouse in Přerov.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Used BOMAR Ergonomic 290.250 GAC fully automatic bandsaw machine, manufactured in 2012. This professional horizontal bandsaw machine is suitable for the automatic cutting of various metal profiles, tubes, and solid materials. The machine features a fully automatic sawing cycle, a hydraulic saw arm, and a hydraulic material clamp. The cutting length and the number of parts to be cut can be set, making the machine very suitable for series production. The saw arm can be adjusted for miter cuts. Automatic cutting is possible up to 45°, while semi-automatic cutting is possible up to 60° under certain conditions. Specifications: Max. cutting diameter: Ø 250 mm Max. cutting capacity 0°: approx. 280 × 230 / 290 × 230 mm Max. square material 0°: 250 × 250 mm Saw blade: 2,910 × 27 × 0.9 mm Sawing speeds: 40 / 80 m/min Motor power: 1.1 / 1.5 kW Connection: 3 × 400 V Min. cutting diameter: Ø 5 mm Hydraulic up and down movement of the saw arm Hydraulic material clamp Dimensions: Length: 1,790 mm Bwjdpfx As Afp T Seknsw Width: 1,810 mm Height: 1,200 mm Weight: approx. 575 kg

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 6 h, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 460 mm, cutting width (max.): 600 mm, control type: PLC-controlled, roller diameter: 460 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 1,630 mm, total length: 3,200 mm, total width: 1,140 mm, overall weight: 1,200 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, motor brake, Semi-automatic hydraulic band saw Double-sided miter cuts: ±60° Round cuts at 90°: 460 mm Rectangular cuts at 90°: 600 × 460 mm Round cuts at ±45°: 460 mm Round cuts at ±60°: 320 mm Saw band: 5380 × 41 × 1.3 mm Bjds Aa Dtcspfx Aknsww Band speed: 20–100 m/min Main motor: 4.0 kW Weight: approx. 1,195 kg Power supply: 3 × 400 V MITSUBISHI PLC control with touch display Hydraulic material clamping Hydraulic saw feed Automatic feed monitoring PEGAS BRP Digital angle display Manual material feed MAIN ADVANTAGES Large cutting capacity up to 600 × 460 mm Double-sided miter cuts up to 60° Robust construction for demanding applications Hydraulic cutting cycle Stepless band speed Ideal for large steel profiles and structures 6-MONTH MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of a recognized warranty claim, the buyer bears the travel and transportation costs of the technician. Service rates: Travel costs: 1 EUR/km (round trip) Travel time: 25 EUR/hour Technician work: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Price: 16,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Immediately available! We offer transport, installation, and operator training for an additional charge, according to our service rates. ORIGINAL ACCESSORIES PEGAS-GONDA original accessories available (see accessory price list). We especially recommend matching roller conveyors for long and heavy workpieces. We will be happy to prepare an offer for a complete sawing station. YOUR ADVANTAGES: Large cutting capacity Double-sided miter cuts ±60° Directly from the manufacturer 9,133 EUR price advantage 6-month warranty Original manufacturer's service Immediately available Contact us for a visit or further information! PEGAS-GONDA – directly from the manufacturer.

Condition: good (used), Year of construction: 2006, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, cutting width (max.): 440 mm, control type: PLC-controlled, total height: 1,600 mm, total length: 3,300 mm, total width: 1,500 mm, overall weight: 4,700 kg, cutting range round steel at 90°: 440 mm, Equipment: CE marking, documentation/manual, Automatic band saw for Aluminium, capacity Ø 440 mm, 90°-cut, cutting speed 200-1100 m/min stepless, motor 22 kw, chip conveyor, piece counter, hydraulic material clamping adjustable, coolant device with filter, dimension 3300x1500x1600 mm, weight ca. 4700 kgs Bsdpfx Akjy Awagsnsww

Condition: good (used), Year of construction: 2019, Used automatic band saw PEGAS 230x280 A-CNC-R Blade dimensions: 2720x27x0.9mm Cutting angle up to 60° Blade speed from 20 to 100 m/min Cutting capacity at 0°: round 230 mm, rectangular 280x200 mm Bwedpfxe Af Ur Dj Aknow Year of manufacture: 2019

Condition: used, Year of construction: 1997, functionality: unexamined, saw blade diameter: 400 mm, type of input current: three-phase, cutting diameter: 400 mm, input voltage: 400 V, We are offering this used Kaltenbach KKS 400 E saw, manufactured in 1997. The sawing capacity is 400 mm. Bwedpjz Sx Adsfx Aknow It has two cutting speeds. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2015, cutting range 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 45 degrees: square 250 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm capacity 60 degrees: square 180 mm automatic feeds 9999,9 mm feed minimum 2.0 mm cutting diameter minimum 5.0 mm band speed 15 - 100 m/min vice 340 mm Öffnung dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1240 kg range L-W-H 1800 x 1900 x 1750 mm actual NEW price about 23.000 Euro special price on request Equipment: - robust electro-hydraulic fully automatic band saw (INDUSTRY) - with additional semi-automatic function, for cuts from 0° to 60° left - WINDOWS “CE” based MEP 50 – control and 7” touch screen display * simple and quick setting of all machine parameters * with additional soft keys + backlit display * 10 programs, each with a maximum of 9999 pieces and . a maximum length of 9999.9 mm - material feed with stepper motor via ball screw * single stroke 600 mm repeatable to saw any length * accuracy of ± 0.1/600 mm - feeder with protective cover and safety limit switch - precise setting of the cutting feed with indication in mm/min - positioning of the saw head and movement of the feeder using a joystick - automatic detection of the start of the cut - large deflection discs, adjustable from cast steel - Saw blade tension with blade tension control and display - Hard metal blade guides for maximum cutting precision - Automatic monitoring of the cutting load - Vice with quick adjustment Bwjdpfx Ake Agcl Eenjw * with interchangeable clamping and stop jaws - Large, laterally extendable chip tray and coolant container * equipped with 2 electric pumps for lubricating and cooling the saw blade * Coolant gun for cleaning the machine - Chip removal brush for cleaning the saw blade - Operating instructions DE Information from the manufacturer: When installing this saw in a network with a residual current device (FI), this should be universally current sensitive and not less than 300 mA.

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 566-06124, functionality: fully functional, Doall automatic bandsaw in good working condition. Bwsdpfsx A S Agex Aknew Cutting capacity round: 335 mm Year of manufacture: 2006

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 8 h, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 500 mm, control type: PLC-controlled, roller diameter: 360 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,340 mm, total length: 2,600 mm, total width: 2,940 mm, overall weight: 1,500 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, motor brake, PEGAS-GONDA 360x500 A-CNC-R | CNC AUTOMATED MACHINE | 33% SAVING AUTOMATIC MITER BANDSAW – DIRECTLY FROM THE MANUFACTURER! We are selling an automatic bandsaw PEGAS-GONDA 360x500 A-CNC-R directly from our showroom. The machine is designed for economical, automatic sawing of profiles, tubes, and solid materials. Automatic material feed and programmable control enable efficient series production. Demonstration machine from our showroom. For sale due to the replacement of our exhibition machines. SPECIAL PRICE – 33.3% SAVING! - New price: 34,398 EUR - Our price: 22,950 EUR plus VAT - You save 11,448 EUR! TECHNICAL DATA - Automatic hydraulic bandsaw - Cutting range 90°: round 360 mm - Rectangle 90°: 500 × 360 mm - Cutting range 45°: round 360 mm - Rectangle 45°: 440 × 240 mm - Cutting range 60°: round 300 mm - Rectangle 60°: 290 × 280 mm - Automatic miter cuts up to 45° right - Semi-automatic miter cuts up to 60° right - Saw band: 4780 × 34 × 1.1 mm - Band speed: 20–100 m/min - Main motor: 3.0 kW - Weight: approx. 1,500 kg - MITSUBISHI FX5U PLC control Bodpo Aa Drxjfx Aknoww - MITSUBISHI GT2104 color touchscreen - Automatic hydraulic material feed - Hydraulic material clamping - Programmable quantities and cutting lengths 6 MONTHS MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of a recognized warranty claim, the buyer will bear the travel and transport costs of the technician. Service rates: - Travel costs: 1 EUR/km (round trip) - Travel time: 25 EUR/hour - Technician work: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Price: 22,950 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Available immediately! We offer transport, commissioning, and operator training for an additional fee at our service rates. ORIGINAL ACCESSORIES A wide range of PEGAS-GONDA original accessories is available (see accessories price list). We particularly recommend matching roller conveyors for efficient material handling. We will gladly prepare a quotation for a complete sawing station. YOUR ADVANTAGES: - Automatic material feed - Miter cuts up to 60° - MITSUBISHI PLC control - Directly from the manufacturer - 11,448 EUR price advantage - 6 months warranty - Original manufacturer service - Available immediately Contact us for more information or to arrange a visit! PEGAS-GONDA – directly from the manufacturer.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 1001058, power: 4 kW (5.44 HP), type of input current: three-phase, cutting height (max.): 800 mm, total height: 800 mm, overall weight: 2,960 kg, coolant pump power: 120 W, cutting range round steel at 45°: 440 mm, cutting range round steel at 90°: 800 mm, cutting range square steel at 45°: 440 mm, cutting range square steel at 90°: 800 mm, height adjustment type: hydraulic, roll diameter: 800 mm, saw band length: 820 mm, saw blade length: 8,200 mm, Excellent working condition. Last 2 years doesn’t work Bsdpfjxwcd Dox Aknjww

Condition: used, Year of construction: 2015, machine/vehicle number: 319 C1000075, cutting length (max.): 6,600 mm, saw blade diameter: 600 mm, For sale is a Schüco double miter saw PDG e-Cut600L, manufactured in 2015. The machine is designed for the precise cutting to length and miter cutting of profiles and features a version with a cutting length of 6,600 mm. With its two saw blades, each with a diameter of 600 mm, it is particularly suitable for professional use in profile and window manufacturing. The Schüco PDG e-Cut600L enables the cutting of profiles to defined lengths and processing with different miter angles. Technical data: Bwedpfx Aksz Spn Ronow • Version: 6.6 m • Motor: 230 / 400 V / 2 x 2.2 kW • Saw blade speed: 2800 rpm • Tilt angle: 20° (outward), 45° (inward) • Saw blade Ø: 2 x 600 mm • Cutting length (min.): 350 mm; 270 mm; (via software) • Cutting length (max.): 6600 mm

Condition: used, Year of construction: 2018, capacity 90 degrees: round 430 mm capacity 90 degrees: square 340x340 mm capacity 90 degrees: flat 460x335 mm Cutting area at 45 degrees right: round 320 mm Cutting range at 45 degrees right: square 320x320 mm Cutting range at 45 degrees right: flat 320x320 mm capacity 60 degrees: round 240 mm capacity 60 degrees: square 220x220 mm capacity 60 degrees: flat 210x230 mm min. dia. Ø 6 mm table height 700 mm dimensions of saw-band 5090x34x1,1 mm Bsdpfx Akj Agpgqjnsww cutting speed 32/64 m/min total power requirement 3,5 kW weight of the machine ca. 1.050 kg dimensions of the machine ca. 2700x1250x1400 mm

Condition: used, Year of construction: 2008, functionality: fully functional, miter ja cooling ja Bodpfx Ajyacp Tjknjww weight of the machine ca. 400 kg

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex works: Hydraulic horizontal band saw automation machine, Jaespa Bsdpfj Aa Iibex Aknsww Type W 320 AZ – 6 Year of manufacture 1995 Cutting capacity: 320 mm round / 90 degrees Cutting capacity: 320 x 320 mm rectangular / 90 degrees Band speed, infinitely variable: 15 – 110 m/min Drive power: 4.9 kW Cutting lengths: 5 – 9999 mm Complete as shown in the picture, including all powered roller conveyors Weight: 2.2 tons Price: EUR 2,750.00 plus VAT, ex works

Condition: good (used), Year of construction: 1976, functionality: fully functional, Cold circular saw with automatic feeder Year of manufacture: approx. 1976 Equipment: Bjdpfswtdi Aox Akneww - Standard accessories - Automatic feeder, cutting length 1700 mm - Various saw blades - Coolant system - Infeed roller conveyor 2400 mm, split (2 x 1200 mm) - Outfeed roller conveyor 500 mm - Documentation Condition: good, workshop tested

Condition: used, Year of construction: 1990, Max. saw blade diameter: 350 mm Manual saw feed Bwsdpfx Ae Aa Ac Asknew 2 sawing speeds Coolant lubrication