Band Saw - Automatic

BERG & SCHMID A280

Condition: excellent (used), The fully hydraulic production rapid-frame bandsaw features a universal hydraulic system for either exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, using a standard tooth pitch of 3 or 4 teeth per inch. It is equipped with a pre-tensioned bow guide, enclosed oil hydraulics, three-position pivot bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lift-off movement, accelerated return stroke, and comes standard with a continuously adjustable mitre device. Rapid traverse for saw bow lifting. The oscillating vice ensures optimal use of the saw blade. Longitudinal guide with ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop shutdown. Push-button controls for ON, OFF, and rapid traverse lifting of the saw bow. Manufacturer: KASTO Model: Metal Frame Bandsaw Machine type: PSB 280 U Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per min Cutting speeds: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 280 mm Flat cutting capacity: 280 x 150 mm Mitre adjustment: 0–45° Material support height: 600 mm Weight: 650 kg Dimensions (L/W): 1500 x 600 mm Height: 1000 mm Djdpoxdwbksfx Aaaeki Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: Coolant equipment, rapid traverse lowering, rapid traverse raising.

Condition: used, Year of construction: 2005, Technical Data: Cutting capacity: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest residual piece length: 35 mm Total connected load: 2.0 kW Saw motor, frequency-controlled: 1.5 kW Infinitely variable cutting speed (frequency-controlled): 20 - 110 m/min Saw band dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, upper part fully raised: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Dkjdpfxox Irx Ie Aaaoi Features: - Infinitely variable cutting speed - Saw band guides made of carbide, replaceable - Hydraulic saw feed - Mechanical saw band tensioning - Machine light - Saw band cleaning via freely rotating, easily replaceable wire brush - Coolant supply via 1 coolant nozzle and 1 coolant hose, coolant tank capacity approx. 45 l, pump capacity 16 l/min - Minimum quantity lubrication - Infeed roller conveyor (1000 mm) and outfeed roller conveyor (2000 mm) with scale and length stop

Condition: used, Year of construction: 2000, cutting diameter 280 mm saw band length 4930 mm capacity 90 degrees: square 280 x 280 mm capacity 45 degrees: round 280 mm capacity 45 degrees: square 280 x 280 mm capacity 60 degrees: round 220 mm capacity 60 degrees: square 200 x 200 mm feed length 600 mm feed length: multiple 5400 mm cutting speed 17 - 90 m/min length of rest piece min/max min. 30 mm saw diameter min. 10 mm control KASTO, Compact Control total power requirement 5 kW weight of the machine ca. 1,75 t dimensions of machine L x W x H 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width; roller track 1350 mm length, 300 mm width Dkedpfx Asw En Efoaaji

Condition: new, cutting diameter 305 mm saw band length 3375 mm cutting width 350 mm dimensions of saw-band 3375 x 27 x 0,9 mm 305 mm 260 mm Dkjdsu Dbvtepfx Aaaoi 350 x 200 mm 250 mm 230 mm 230 x 200 mm 175 mm 155 mm 170 x 100 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,5 x 1,8 x 1,9 m

Condition: used, Year of construction: 2011, cutting diameter 260 mm saw band length 3340 x 27 x 0,9 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 380 x 260 mm band speed 37 / 74 m/min sawing motor 1,5 kW weight of the machine ca. 0,62 t dimensions of the machine ca. 1,7 x 1,4 x 1,3 m Miter band saw - Semi-automatic - Double miter Dkedpfxjwkvq Hs Aaaji - Material detection during lowering - incl. 7 saw blades

Condition: good (used), Year of construction: 2007, 1 used band saw manufactured by Bauer type SA 320 year 2007 Technical data: Type Electrical connection 3 x 400 V / 50 Hz Motor power 3000 W Dkjdjttbf Ropfx Aaaei Speed levels 2 Saw blade speeds 30- 120 m/min Saw blade dimensions 4150 x 34 x 1.1 mm Table height material feed 800 mm Cutting capacities Cutting capacity 0° round profile 320 mm Cutting capacity 0° round full 320 mm Cutting capacity 0° square material horizontal 320 x 320 mm Cutting capacity 0° square material upright Coolant pump

Condition: good (used), Year of construction: 2015, functionality: fully functional, cutting height (max.): 320 mm, cutting range round steel at 45°: 260 mm, stepless cutting speed hydraulic material clamping infeed automat coolant device roll conveyor Dodpfx Aaswvi Ageaoki manual swivable cutting frame for miter cuts Technische Daten: Schnittbereich rund 0° / cutting range round 0° 320 mm Schnittbereich vierkant 0° /cutting range square 0° 350x320 mm Schnittbereich rund 45° / cutting range round 45° 260 mm Schnittbereich vierkant 45° /cutting range square 45° 250x180 mm Schnittgeschwindigkeit / cutting speed 20-100 m/min. Sägebandlänge / dimensions of the saw band 3660x27x0,9 mm Antriebsleistung / drive capacity 3,9 kW Gewicht der Maschine ca. / weight 1825 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: new, Year of construction: 2026, Cormak S200R Manual band saw for cutting in large industrial facilities. Features high accuracy metal cutting, even at 45º/60º. Machine features CORMAK S-200R MANUAL band saw with EC declaration, provides cutting metal at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Appropriate arm lowering speed is ensured by a valve controlling oil flow between the chambers. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. Material is fed manually. This model is used in both low and high quantity production, and due to its solid construction allows for cutting various materials, including stainless steel, tool steel and profiles. The machine provides cutting at an angle due to rotary arm. The band saw arm is made of uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of various materials. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. The arm is equipped with an automatic blade tension sensor, at a 25° angle, thus increasing blade's durability. There is a blade cleaning brush attached to the bottom of the arm. Machine drive is transmitted through a worm drive filled with gear oil. The machine is equipped with a three-phase motor with double winding and two cutting speeds. The motor is thermally protected. Two cutting band speeds: 35 and 70 m/min. The construction: the arm, the vice and the rotating table are iron castings. Closed cooling system. The machine is equipped with a bumper with a ruler for setting the length of material cut. The base of the machine is a rigid cuboid made of steel sheets in which a fluid container with a flood coolant pump is located. Safety during cutting ensures an electrical system that meets all EC requirements. The machine is equipped with a limit switch which stops the machine after a cutting process is finished, an emergency button, and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened Technical data Type gravitational Arm raising and lowering gravitational with stepless arm lowering adjustment Band speed 36/70 m/min Cutting at an angle from 45° left up to 60° right Vice manual Minimum cutting diameter Ø 5 mm Minimum material length in vice 30 mm Vice base height 890 mm Cutting band dimensions 27×0.9×2910 mm Total power 2.1 kW Dimensions (LxWxH) 1600×800×1400 mm Weight 500 kg Max. cutting range [mm] Angle 0º ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 Dodpsfy Ttiofx Aaaeki For more information please visit our web page or contact us

Condition: ready for operation (used), Year of construction: 2018, cutting diameter 300 mm Dodpfx Ajx A H T Hoaaski saw band length 3660 x 27 x 0.9 mm capacity 90 degrees: flat 320 x 290 mm capacity 45 degrees: round 290 mm capacity 45 degrees: flat 260 x 280 mm capacity 60 degrees: round 200 mm capacity 60 degrees: flat 180 x 170 mm coolant capacity ca. 100 l Control SPS total power requirement 2.4 kW AC weight 904 kg range L-W-H 2410 x 1920 x 2020 mm in good conditions Original price approx. 22.000 euros Special price on request - in checked conditions - machinevideo - ?v=LAhu_AI9J5A Features: - Robust electro-hydraulic miter band saw, fully automatic (INDUSTRIAL) * Fully automatic with automatic material feed * Material feed unit with recirculating ball screws - Includes PLC MITSUBISHI control unit * 20 programs, each with 15 cutting lengths + number of pieces programmable - For angles from 0° to 60°, with ball-bearing rotary table * Mitre cuts up to 45° possible in automatic mode * Mitre cuts up to 60° possible in semi-automatic mode * Manual mitre adjustment * Stepless adjustment of the mitre angle - Saw blade guides made of carbide plates - Saw feed continuously adjustable via fine throttle - Strong machine bed and torsion-free saw frame - Stepless speed adjustment of the saw blade - Coolant device - Operating instructions for machine + control system * Special accessories included: - 1x PEGAS chip conveyor

Condition: new, Year of construction: 2026, Powerful, reliable and modern semi-automatic band saw for metal with automatic arm raising and lowering. The arm is rotational in both ways. The machine is fantastic for ironworking, e.g. cutting tubes and profiles. Product features CORMAK S-200RH band saw is by default equipped with automatic arm lowering and raising as well as with a precise arm height regulator. Due to an automatic hydraulic damper, the manual handling of the machine has been simplified to feed and clamping the cut material in a vice. The arm made of uniform iron casting, together with a refined, solid and stable construction, ensure S-200R's exceptional rigidity, resulting in failure-free handling and high cutting precision. The innovativeness and production of semi-automatic and automatic series "CORMAK-PREMIUM LINE" band saws, compliant with the norms and standards consistent with ISO:910001 and ISO:140001 certificates, warrant safety, quality and reliability of the product. M3V motors from ABB, a renowned worldwide manufacturer, warrant long-term reliability. As an official and the only representative on the Polish market, we assure that the product is original and provide professional, customised warranty and post-warranty services. Technical data Type - semi-automatic Arm raising and lowering - hydraulic with smooth arm lowering control Band speed - 36/70 mm/min Angled cutting - left to 45°, right to 60° Vice - hydraulic Minimum cutting diameter - Ø 5 mm Minimum material length in vice - 30 mm Vice base height - 780 mm Cutting band dimensions - 27×0.9×2910 mm Total power - 2.1 kW Dimensions (LxWxH) - 1600×800×1400 mm Dkedpfxji D D A Ss Aaaji Weight - 530 kg Angle 0º -----ø250 320×240 240×240 45º L ø200 220×120 190×190 45º P ø220 235×120 210×210 60º P ø110 155×110 100×100 Default equipment Control panel on separate component Built-in hydraulic unit Hydraulic control of arm motion (up – down) with possibility of smooth lowering speed control Arm position memory function (arm returns to a defined height after cutting) Cutting at angles of L/R 45° - 0° - 45° - 60° Brush for cleaning band Cooling system Bi-metal band saw EC Declaration of Conformity User manual The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.