Used Weiler Lz for sale (208)

Condition: used, machine/vehicle number: 11756, second-hand WEILER LZ 280 sliding headstock and sliding headstock lathe Njdevd Dbnopfx Af Eelh center height 125mm center width: 800mm spindle speed approx. 26-2000 rpm 1 x three-jaw lathe chuck Ø 125mm with inner and outer jaws, brand new Multifix size A with 2 interchangeable holders Emergency stop/switch unit, rear chip guard, all change wheels present, drive disk, storage tray, machine light, new socket, 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube, fixed point and MK 2 sleeve for clamping tube, bed stop, chuck protection cover, various turning tools and operating instructions. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. A viewing of the machine is possible by arrangement.

Condition: good (used), WEILER LZ 330 / From Educational Facility - Swing over bed: 330 mm - Swing over cross slide: 165 mm - Turning length: 800 mm - Speed range / gearbox: 25-2800 rpm Nsdpfjxf Uf Njx Af Eslh - Automatic longitudinal / face feeds - Spindle bore: 38 mm - 3-jaw chuck - Collet chuck system incl. 20 collets - Multifix incl. 3 tool holders - Copying device - Various accessories - Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight: 750 kg Errors and omissions excepted

Condition: excellent (used), Year of construction: 1979, Manufacturer Weiler type Commador II L+Z Lathe year of construction: 1979 L x W x H: approx. 2500 x 1200 x 1800 mm weight: approx. 1500 kg Nlodslp Ircepfx Af Eoh Technical data: Max. Turning diameter over bed: approx. Ø 380 mm Max. Turning diameter over support: approx. Ø 190 mm Max. turning length: approx. 1000 mm Bar passage: approx. Ø 56 mm Spindle: Speed range: approx. 25 - 2000 rpm spindle nose: A 2 - 6 Drive power: approx. 4,0 kW Automatic longitudinal & face feeds: Feed range: approx. 0.026 - 1.253 mm/rev. Suitable for threads: - metric 0.35 - 12 mm - inch 44 - 2 Gg/" - diametrical - pitch thread 88 - 5 Dp - Module 0,2 - 4 Tailstock: MK 4 Without tool holder

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Njdpfx Aertd Uwef Eelh Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm turning length 800 mm total power requirement 3 kW weight of the machine ca. 800 kg Nlsdpfxswwl Izo Af Ejh dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Nodew I A Uxopfx Af Eolh Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: good (used), Lead & feed screw lathe WEILER LZ330 from educational institution - Swing diameter over bed 330 mm - Swing diameter over support 165 mm - Turning length 800 mm - Spindle bore 36 mm - Speed range 25-2800 rpm - Automatic longitudinal / face feed - Multifix with inserts - Drive power 3KW - Collet chuck + 20x collets - Three-jaw chuck - Four-jaw chuck - Face plate - Chip guard - Various accessories - Documentation Dimensions: Nodpfxswndcfo Af Eolh LxWxH 1.8x0.7x1.6 meters / weight 750 kg Errors / input mistakes excepted

Condition: used, functionality: fully functional, Distance between centers: 450 mm Center height: 120 mm Spindle bore: 23 mm Njdpjwcxf Dofx Af Eolh Speed: 30 – 3000 rpm Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint finish: Reseda green RAL 6011. Digital display: Available upon request for an additional charge. Accessories: Additional accessories available upon request! We are also happy to offer this machine completely overhauled!

Condition: ready for operation (used), operating hours: 33,600 h, functionality: fully functional, spindle bore: 83 mm, center width: 2,000 mm, turning diameter over bed slide: 570 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens 810D, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swing diameter over bed: 570 mm Swing diameter over carriage: 340 mm Centre distance: 2,000 mm Speed range, stage 1: 1–625 rpm Speed range, stage 2: 4–2,500 rpm Spindle bore: 83 mm Spindle nose: Size 8 DIN 55027 Feed range longitudinal/cross: 0–20 mm/rev Metric threads: 0.1–400 mm Inch threads: 1/4–56 TPI Tailstock quill diameter: 80 mm Taper: MK 5 MACHINE DETAILS Control: Siemens 810D Electrical data Main drive: 20/17 kW Connected load: 30 kW Dimensions (L x W x H): 4,000 x 2,300 x 1,800 mm Operating hours: 33,600 hours Nljdpfoxqpgfex Af Eoh EQUIPMENT Rapid traverse longitudinal/cross 8-position Sauter tool turret incl. holders Mayfran chip conveyor with coolant system Movable chip guard cover 3-jaw chuck Schunk Rota S 250 Manuals Note: The viewing windows and feed selection levers have been replaced. In addition, an oil change has been performed and the oil filter replaced.

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 320 mm turning diameter over slide rest: 198 mm turning length: 650 mm total power requirement: 2,2 kW weight of the machine ca.: 650 kg dimensions of the machine ca.: 1700x1000x1700 mm : 3 - Achs Heidenhain ND 780 : Ø 40 mm : 96 - 2500 1/min : A 2 - 5 : 0,007 - 0,63 mm/1 : metrisch 0,25 - 8 mm,Zoll 80 - 2 Gg/",Diametral - Pitch Gewinde 200 - 5 Dp,Modul 0,2 - 4 : MK 3 3-jaw chuck: 160 mm Accerories Nlsdowt Auwjpfx Af Eeh Technical equipment Typ B

Year of construction: 1980, condition: used, Weiler W2 hollow 280 mm centre height 440 mm bed width 320 mm weight of the machine ca. 200 kg +++++ Njdpfxjfgv Dgj Af Eolh Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) Nlodoxq Hh Hjpfx Af Ejh particularly suitable for medium-precision turned parts Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Condition: used, Technical data : Center width approx. 500 mm Center height above bed 125 mm 16 speeds from 125 - 2800 rpm Space requirement, length x width 1.2 x 0.6 m Nljdpfxoxq E Dmj Af Eeh Estimated weight approx. 450 kg . Scope of delivery : Hand lever quick clamping device Electrical monitoring of whether the part clamping lever is in the open or clamped position 1 set of collets from 3.0 - 25.0 mm, increasing by 1 mm Cross support with two tool holders Turret with 6 tool holders .

Condition: used, This Weiler Condor lathe is being auctioned online in our industrial/machinery insolvency auction – SK Hydroautomation GmbH – CNC machines – workshop equipment – material. Nljdpfxoxqyp Ds Af Esh

Condition: used, Year of construction: 2000, Technical details: turning length: 750 mm turning diameter over bed: 330 mm turning diameter over slide: 160 mm spindle bore: 42 mm turning speed range: 1 bis 4500 U/min drive capacity - spindle motor: 10 kW diameter of quill: 50 mm quill stroke: 130 mm control: Weiler Zyklensteuerung D2 Nodexp I E Dopfx Af Ejlh rapid travel - longitudinal/face: 8 m/min weight of the machine ca.: 2100 kg Teach-in lathe, PARAT toolholder basicsystem prepaired for collets 3.chaw-chuck SCHUNK Rota S plus D = 200 mm Yuear of teh Machine 2000, complet retrofitted in 2018 for € 53.000.- Original Invoice exists Control-Update new D2 - V2.07 Machine in very good condition Machine under power *

Year of construction: 2006, condition: ready for operation (used), This Weiler DZ65 was manufactured in 2006. A horizontal turning machine featuring a chip conveyor, counter spindle, extraction system, interface bar feeder, and an in-machine puller for 1m bars. It also boasts an enlarged coolant tank. Consider the opportunity to buy this Weiler DZ65 horizontal turning machine. Contact us for more information. Application Types Turning Nsdpfx Aoxp Sp Hef Ejlh

Condition: used, Technical details: turning diameter over bed: 570 mm turning diameter over support: 340 mm turning length: 1000 mm switched on hours: 37917 h centre distance: 1000 mm swing diameter over bed: 570 mm swing diameter over face slide: 340 mm centre height: 280 mm spindle bore: Ø 66 mm revolution per minute: 1 - 625 steples U/min max. torque on the spindle: 1600 Nm longitudinal feeds:: 0 - 20 mm/U cross feed: 0 - 20 mm/U tailstock quill adjustment:: 160 mm tailstock quill: MK 5 mm total power requirement: 20 kW weight of the machine ca.: 3,2 t dimension machine xH: 2,9 x 2,28 x 1,8 m Machine has been overhauled/refurbished: Ball screw Z overhauled, X-axis end position overhauled, new paint job. Nedpfx Aoxg Nhnef Eelh Conventional design with integrated automatic cycle control. Metric thread cutting, inch threads, DP threads. Chip conveyor not available. 4-jaw chuck with steady rest available. 3-jaw chuck mounted. *

Condition: ready for operation (used), turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - in very good condition (!!) particularly suitable for medium-precision turned parts Njdoxq Hhyjpfx Af Eslh Features: - Robust lead/feed screw lathe - RÖHM three-jaw chuck Ø 160 mm - Foldable lathe chuck guard - Chuck key - MULTIFIX steel holder A, with 3x new inserts - Movable tailstock - Swiveling machine light - Control panel, front left - Automatic feeds for face and upper support - Machine base, with cabinet door (storage space) - Chip splash guard rear panel - 1x empty tool cabinet - Emergency stop button - Operating instructions

Year of construction: 1973, condition: excellent (used), turning length 125 mm Nodoxpxqwopfx Af Eolh weight of the machine ca. 0,4 t

Condition: used, Year of construction: 1997, - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 Nledpfx Afownh I So Eeh - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout - Type of digital readout: Weiler - Year: 1997 - Documentation available: Yes - CE marking present: Yes - Serial number: 270 - Control: CNC Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1977, condition: ready for operation (used), A Weiler precision lathe, overhauled by Mammut in 2004, is available. Center height: 125mm, max. swing over bed/cross slide: 260mm/140mm, distance between centers: 500mm, spindle bore: 28mm, clamping range: 1mm-26mm, drilling diameter: 22mm, cutting edge height: 22mm, tailstock quill diameter: 80mm, tailstock quill travel: 80mm, tailstock offset: 450mm. Documentation available. An on-site inspection is possible. Nedpfsxqqmtjx Af Eslh

Condition: used, Year of construction: 2014, turning length 650 mm turning diameter 320 mm centre height 160 mm turning dia. over face-slide 190 mm quill: 3 MK spindle bore 42 mm turning speeds 25-5000 U/min centre distance 650 mm Number of working hours 637 h total power requirement 8 kW weight of the machine ca. 1250 kg dimensions of the machine ca. 1,6 x 0,5 x 1,7 m Weiler Praktikant VC Plus lathe, built in 2014, from a test workshop, in excellent condition! Features: All 99 storable tools can be programmed separately with feed rate and speed or constant cutting speed. Separate control of speed and feed rate via potentiometer is also possible. Thread pitches are freely programmable and feature electronic limit switches. Additional electronic stops can be set for lengths and diameters. A coolant device is not available. 8" colour screen Energy recovery Accessories: The machine includes a quick-clamping device with 30 collets 5 to Dmr 26 mm, 3-jaw chuck made by Röhm including 10 sets of soft jaws,centring tips, tailstock mounts (MK 3) for thread cutting with threaded drills and dies Njdpfoxn Txajx Af Eolh by hand, 15 Multifix holders size A, turning head for Multifix holder for producing bolt circles,spindle and bed stop, tool cabinet with 12 drawers, WP holder for internal and external machining, drills, reamers, standard thread gauges up to M10, comprehensive documentation on operation and maintenance. Translated with (free version)

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 570 mm turning diameter over support: 340 mm Njdpfx Afswtc T Tj Ejlh turning length: 1.000 mm swing diameter over bed: 570 mm centre height: 280 mm centre distance: 1000 mm switched on hours: 26668 h spindle bore: Ø 66 mm revolution per minute: 1 - 2.500 U/min max. torque on the spindle: 1.200 Nm longitudinal feeds:: 0-20 mm/U cross feed: 0-20 mm/U diameter of quill: MK5 Taper tailstock quill adjustment:: 200 mm total power requirement: 30 kW weight of the machine ca.: 3,2 t dimension machine xH: 2,85x2,29x1,9 m Cycle controlle lathe equipment: -revolving tip (quill) -chip conveyor -cooling water unit manufactor Mayfran *

Condition: used, turning diameter 210 mm turning length 1000 mm Nlodpfx Afjxqrdyj Esh swing diameter over bed slide 435 mm centre height 210 mm greates pass round over bed 435 mm spindle head DIN 55027 / DIN ISO 702-3 spindle bore 52 mm turning speeds 44 - 2.000 U/min transmission ratio 12 feed per revolution 0,036 - 2 U/mm diameter of quill 65 mm quill stroke 120 mm taper bore DIN 228 MK4 total power requirement 5,5 kW -Lead screw and feed screw cover -Brake for main spindle -Toolmaker precision according to DIN 8605 -High drive power and high torque on the main spindle -Large thread cutting range -Convenient operation -Digital position display (HEIDENHAIN ND 7013) 3-axis display for bed, cross slide, and top slide Tool memory for 16 tools Tool memory with one reference point per axis Sum button for Z and Zo Inch/metric switchable Plane path X as radius or diameter display Display resolution up to 1 µ Taper calculator -LED machine light -Coolant device

Condition: used, Year of construction: 2002, Weiler E90 / 4.5M - CNC Lathe with Cycle Automation - Weiler D2 cycle control - Chip conveyor - Approx. 15 pcs. Multifix quick-change toolholders - 1 live centre - Regular servicing by Weiler - Supplied without chuck, without steadies - Year of manufacture: 2002 Technical Data Working Area: - Distance between centres: 4500 mm - Centre height: 450 mm - Swing diameter over bed: 900 mm - Swing diameter over cross slide: 530 mm - Bed width: 600 mm - Travel of cross slide: 590 mm - Travel of top slide: 250 mm - Cross slide length: 1230 mm - Cross slide width: 345 mm - Saddle guideway length: 860 mm - Tool shank cross-section (height/width): 40 x 40 mm Spindle: - Spindle nose according to DIN 55027 / 55026 size: 11 - Spindle diameter in front bearing: 178 mm - Spindle bore: 128 mm - Main spindle internal taper, metric: 140 mm Nodjxn Rr Rspfx Af Eslh Main Drive: - Spindle nose according to DIN 55027 size: 11 - Total speed range: 1 - 1120 rpm - Speed range gear stage I: 1 - 350 rpm - Speed range gear stage II: 4 - 1120 rpm - Drive power at 60%/100% duty cycle: 45 / 37 kW - Max. torque at spindle: 6000 Nm Feed Drive: - Feed range Z/X: 0 - 20 mm/rev - Feed force Z/X: 20 kN - Rapid traverse speed Z/X: 7 / 3.5 m/min Tailstock: - Quill diameter: 140 mm - Quill stroke: 300 mm - Quill internal taper: MK 6 Thread Cutting Range: - Metric threads: 0.1 - 400 mm - Inch threads: 1/4 - 56 TPI - Module threads: 0.125 - 28 mm - DP threads: 1 - 224 DP Connection Data: - Operating voltage: 400 V - Control voltage: 24 / 230 V - Connected load: 55 kW - Rated current: 85 A Machine Dimensions: - Total length: 6900 mm - Total width: 2600 mm - Total height: 2120 mm - Machine weight: 10,500 kg