Used Manual Band Saw for sale (22,024)

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Bsdpfx Aoyh Hc Roknslp

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: AY11051, functionality: fully functional, cutting height (max.): 330 mm, overall weight: 1,500 kg, saw band length: 5,385 mm, saw band width: 100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS SAWING AREA Sawing direction: Vertical. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sawing direction: Vertical Cut to feed roller: max. 230 mm Cut to stop: max. 260 mm Cut width to column: max. 300 mm Total opening: max. 480 mm Cutting height: max. 330 mm Saw band width: max. 100 mm Saw band length: min. 5,385 mm Saw band length: max. 5,485 mm Saw band thickness: min. 0.8 mm Saw band thickness: max. 1 mm Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS & WEIGHT Dimensions (L x W x H): 2,000 x 950 x 2,400 mm Bljde Af Hk Uopfx Aknep Weight: 1,500 kg EQUIPMENT CE marking Max. cut to feed roller: 230 mm Max. cut to stop: 260 mm Max. cut width to column: 300 mm Max. total opening: 480 mm Max. cutting height: 330 mm SAW BAND Max. saw band width: 100 mm Min. saw band length: 5,385 mm Max. saw band length: 5,485 mm Min. saw band thickness: 0.8 mm Max. saw band thickness: 1 mm TABLE AND WHEELS Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm FEEDING AND DUST EXTRACTION Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS GENERAL Year of manufacture: 2002 Color: Blue Serial number: AY11051 CE marking: Yes ELECTRICS AND DRIVE Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS AND WEIGHT Overall length: 2,000 mm Overall width: 950 mm Overall height: 2,400 mm Weight: 1,500 kg

Condition: good (used), Year of construction: 2002, machine/vehicle number: 526-02514, functionality: fully functional, DoALL 2013-V3, 2013-V3 Vertical contour band saw Manufacture DoAll sawing Products U.S. Year of manufacture: 08/2002 Blodpfx Akju A Ikhenep S/N 526-02514 CE marked Variator drive Max. Working height 330 mm Maximum width up to the column 508 mm Capacity of the machine: b 20″ x b 13″ (508mm x 330mm) These vertical machines are one of the most versatile machines on the market! Vertical contour saws for cutting aluminum, brass, copper, mild steel, tough tool steel, stainless steel and sheet metal as well as cutting plastics and fiber materials. They are also available with a variety of attachments that allow for cutting contours, slices and more. The 2013-V2 has the same main structure, capacity and features as the 2013-V3. The only difference is the power of the motor: 2013-V3: 2.2kW/3HP, 400V, 50 Hz Standard equipment One set of high-speed guide blocks with inserts for belts from 3 to 13 mm One set of steel guide inserts for belts of 6, 10 and 13 mm Belt speed indicator Removable chip tray Belt tension indicator Chip blower (requires factory air) Handwheel for lifting the column AC drive with variable speed (speed control, soft start and dynamic braking functions) Belt door interlocks Dual range gearbox Gear oil One bi-metal band saw blade Operating instructions and spare parts manual

Condition: good (used), Year of construction: 2006, functionality: fully functional, overall weight: 4,200 kg, Equipment: CE marking, documentation/manual, Kaltenbach bandsaw KBR 371 NA Chip conveyor Infeed side with roller conveyor, approx. 5 m Programmable material feed Saw band dimensions: 5920 mm x 41 mm Manual and CE marking available Further technical data can be found in the photo documentation Last used in a metalworking shop, not for mass production. Blodps Aavmzjfx Aknjp

Condition: good (used), Year of construction: 2002, functionality: unexamined, 1 used mitre band saw Manufacturer: Kasto Model: SBL 400 G Year of manufacture: 2002 Technical data: Bjdswuqbbjpfx Aknjlp Length: 2491 mm Width: 1240 mm Height: 1369 mm (bow down), 2109 mm (bow up) Minimum cutting length: 6 mm Shortest remnant length: 35 mm Total weight approx.: 920 kg Total drive power approx.: 3.5 kW Mitre adjustment: 0-60° Cutting speed: 32/64 m/min Cutting feed: hydraulically controlled, discharge regulated Material clamping: manual Saw band dimensions: 5090 x 34 x 1.1 mm Saw band guide: carbide, replaceable Saw band tension: mechanical via tensioning cross Saw band cleaning: via easily replaceable wire brush, driven proportionally to the main drive Coolant: supply through a coolant nozzle, tank volume approx. 50 l, pump capacity approx. 16 l/min Cutting ranges in mm approx.: Mitre angle 0° (90°) / 45° / 60° Round: 400 / 320 / 240 Square: 320 x 320 / 320 x 320 / 220 x 220 Flat (W x H): 400 x 320 / 210 x 320

Condition: ready for operation (used), Year of construction: 1961, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Bedpfx Ako Ad Iwyonelp Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: PEHAKA Type: USF 4R Year of manufacture: 1961 Machine type: Metal band saw SAWING DATA Roller diameter: 380 mm Overhang: 380 mm Workpiece height: 260 mm Table dimensions: 600 × 600 mm Cutting speed: 0–2,000 mm/min MACHINE DETAILS ELECTRICAL DATA Total power consumption: 1.5 kW DIMENSIONS AND WEIGHT Length: 1,200 mm Width: 1,000 mm Height: 1,900 mm Weight: 1,300 kg

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex works: Hydraulic horizontal band saw automation machine, Jaespa Bljdo Aa Iibspfx Aknjp Type W 320 AZ – 6 Year of manufacture 1995 Cutting capacity: 320 mm round / 90 degrees Cutting capacity: 320 x 320 mm rectangular / 90 degrees Band speed, infinitely variable: 15 – 110 m/min Drive power: 4.9 kW Cutting lengths: 5 – 9999 mm Complete as shown in the picture, including all powered roller conveyors Weight: 2.2 tons Price: EUR 2,750.00 plus VAT, ex works

Condition: like new (used), Year of construction: 2021, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting width (max.): 310 mm, control type: manual, actuation type: manual, Equipment: CE marking, documentation/manual, Technical specifications: Cutting range: (circle): 255 mm, (rectangle): 190 x 310 mm, (square): 190 mm, Cutting range at a 45° angle (circle): 215 mm, Saw blade dimensions: 27 x 0.9 x 2750 mm, Two saw blade speeds: 335–75 m/min, Electrical connection: 400 V, Power input: 1500 W, Machine dimensions (W x H x D): 1680 x 1850 x 1300 mm, Weight: 335 kg, Heavy-duty cast iron construction, Angle adjustment by rotating the arm from -60° to +45°, Quick-release vice, High cutting accuracy due to vibration-free operation, Quiet operation, Precise and durable saw blade guide, easy replacement, Option to choose “manual blade control” for switching on and off, Longitudinal fence with a scale, Brush for removing chips, Automatic blade shut-off after cutting is completed. The machine can be viewed and fully tested in our warehouse in Přerov by prior arrangement. Bedpfx Ake Advqnonolp

Condition: new, Year of construction: 2026, machine/vehicle number: MTP-BS260G-2026, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 260 mm, control type: manual, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 72 rpm, rotational speed (min.): 36 rpm, total height: 1,900 mm, total length: 1,950 mm, total width: 750 mm, overall weight: 230 kg, Equipment: CE marking, documentation/manual, motor brake, rotational speed infinitely variable, OFFER OF THE WEEK – 5% DISCOUNT! MTP BS260G METAL BAND SAW PROFESSIONAL HORIZONTAL METAL BAND SAW WITH 0–60° SWIVEL CUTTING HEAD The brand-new MTP BS260G Metal Band Saw has been designed for precise cutting of carbon steel, stainless steel, acid-resistant steel, alloy steel, and non-ferrous metals. Thanks to its robust construction, hydraulic downfeed system, and high-quality blade guidance, it is an ideal solution for manufacturing plants, metal fabrication workshops, tool rooms, maintenance departments, and engineering companies. The swivel saw head allows precise cutting at any angle from 0° to 60°, providing excellent flexibility for a wide range of applications. The hydraulic downfeed system ensures smooth, accurate, and repeatable cutting performance. STANDARD EQUIPMENT • Integrated coolant system • Hydraulic cylinder with infinitely adjustable downfeed • Manual mechanical blade tensioning system • Carbide blade guides with precision bearings • Swivel cutting head (0°–60°) • Material clamping vice Bljdoyr Ndhjpfx Aknep • Infinitely variable feed adjustment • Automatic blade drive shut-off after completing the cut • Technical documentation and operating manual • CE Declaration of Conformity KEY FEATURES • Precise mitre cutting from 0° to 60° • Heavy-duty cast iron saw frame for maximum rigidity • Two blade speeds: 36 and 72 m/min • High-precision carbide blade guidance for extended blade life • Hydraulic automatic downfeed system • Integrated coolant system for improved blade durability • Excellent cutting accuracy and surface finish • Ideal for cutting tubes, pipes, profiles, bars, and solid steel sections TECHNICAL SPECIFICATIONS • Machine type: Horizontal metal band saw • Cutting angle range: 0°–60° • Blade dimensions: 2455 × 27 × 0.9 mm • Blade speeds: 36 / 72 m/min • Feed rate: 0–50 m/min (infinitely variable) • Blade tensioning: Manual mechanical • Downfeed adjustment: Hydraulic, infinitely variable • Vice base height: 1010 mm • Main motor power: 1.1 kW • Power supply: 400 V / 50 Hz / 3-phase • Machine dimensions: 1950 × 750 × 1900 mm • Machine weight: 230 kg SAFETY The machine is equipped with blade guards, safety switches, and an automatic motor shut-off system that stops operation after the cutting cycle is completed or when a guard is opened. An additional safety feature automatically switches off the machine if the saw blade breaks. TECHNICAL SUPPORT We provide professional technical advice, warranty and after-sales service, as well as assistance in selecting the appropriate saw blades and cutting parameters. Transport can be arranged throughout Europe and worldwide. Brand-new machine supplied with a 12-month warranty, fully operational and ready for immediate use.

Condition: good (used), Year of construction: 1980, Bandsaw blade dimensions: recommended size 3400 / 3200 mm Cutting width: 400 mm Bodpfxj Ahq Ale Aknjlp Bandsaw blade length min./max.: 3200 / 3400 mm Bandsaw blade width: 20 x 3 mm Cutting speed: 10 - 2150 / 8 steps (manual) m/min Table size: 670 x 670 mm Table height above floor: 1020 mm Table tilting +/-: left 10° and right 30° Table movement horizontal: 270 mm Total power requirement: approx. 1.5 kW Machine weight approx.: 650 kg Machine dimensions (LxWxH): 1.2 x 1.05 x 2.0 m

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: ST001, functionality: fully functional, power: 18.4 kW (25.02 HP), overall weight: 9,500 kg, saw band length: 11,760 mm, saw band width: 67 mm, No minimum price – guaranteed sale to the highest bidder! Blodpfx Ake Af Hd Ionep TECHNICAL DETAILS Circular sawing capacity: 1,050 mm Saw band length: 11,760 mm Saw band width: 67 mm Saw band thickness: 1.6 mm Workpiece clamping: Hydraulic MACHINE DETAILS Control system: Conventional Power: 18.4 kW Dimensions & Weight Dimensions (L x W x H): 12,000 x 2,450 x 2,000 mm Unladen weight: 9,500 kg Number of transport packages: 2 EQUIPMENT CE marking 6-meter roller conveyor

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Blsdo Ad H Dlspfx Aknop TECHNICAL DETAILS General Data Manufacturer: Kölle Type: ERSO Machine Type: Bandsaw Work Table Table Dimensions: 600 x 560 mm Table Groove: 1 MACHINE DETAILS Dimensions and Weight Length: 1,000 mm Width: 700 mm Height: 1,800 mm Weight: 300 kg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, control type: manual, total height: 1,400 mm, total length: 1,640 mm, total width: 750 mm, overall weight: 295 kg, table height: 900 mm, Equipment: CE marking, cooling unit, lighting, Technical specifications: Bevel cutting on two sides, Cutting speed: 40/80 m/min, Motor power: 0.9/1.4 kW; 400 V / 50 Hz, Machine dimensions (L x W x H): 1640 x 750 x 1400 mm, Machine weight: 295 kg, Saw blade dimensions: 2710 x 27 x 0.9 mm, Working height: 900 mm, Cutting range (90°): Ø 235 mm (300 x 200 mm), Main motor: 400 V, 50 Hz, 0.9/1.4 kW, Pump motor: 400 V, 50 Hz, 0.05 kW, Belt speed: 35/70 m/min, Vice working height: 900 mm, Coolant tank capacity: approx. 15 l. Bljdpfxjz Tdcxj Aknjp The saw is in very good technical condition and can be tested at our warehouse in Přerov.

Condition: like new (used), Year of construction: 2025, machine/vehicle number: 5401511001, functionality: fully functional, operating hours: 25 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 800 mm, control type: CNC control, roller diameter: 540 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, PEGAS-GONDA 540 HORIZONT X-CNC-M | CNC | MIRROR VERSION | SAVE 44% EXCLUSIVE CNC DEMONSTRATION MACHINE – LEFT-HAND MATERIAL FEED – DIRECTLY FROM THE MANUFACTURER! We are selling a fully automatic two-column bandsaw, PEGAS-GONDA 540 HORIZONT X-CNC-M, directly from our showroom. M = MIRROR (MIRROR VERSION) This special version of the 540 HORIZONT X-CNC features a mirrored material feed: the material is fed from the LEFT instead of the usual right side. The perfect solution for production halls where the spatial conditions do not allow for material feed from the right! The machine offers complete CNC control for angular positioning, material feed, and sawing process. Demonstration machine, not used in regular production. Sale due to the renewal of our showroom equipment. SPECIAL PRICE – 44% SAVING! List price: 105,299 EUR Our price: 59,000 EUR plus VAT. You save 46,299 EUR! TECHNICAL DATA Model: 540 HORIZONT X-CNC-M (MIRROR) Fully automatic CNC two-column bandsaw Material feed from the LEFT CNC-controlled angle adjustment: ±45° Round cut at 90°: 540 mm Rectangular cut at 90°: 750 × 490 mm Saw band: 6880 × 41 × 1.3 mm Band speed: 15–150 m/min Main motor: 5.5 kW Weight: approx. 3,875 kg SIEMENS SIMATIC S7-1500 PLC Bljdpe Aa Dmvefx Aknop SIEMENS TP700 Comfort Touchscreen CNC-controlled material feed Feed stroke: 2,000 mm Multiple feed: up to 19,999 mm Servo-controlled saw feed Automatic cut adjustment (ASR) Up to 100 cut programs 6 MONTHS MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of a recognized warranty claim, the buyer only bears the travel and transportation costs. Service rates: Travel costs: 1 EUR/km (round trip) Travel time: 25 EUR/hour Technician work: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Price: 59,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Immediately available! We offer transport to the customer, commissioning, and operator training for an additional fee, according to our service rates. ORIGINAL ACCESSORIES A wide range of original accessories are available (see accessory price list). We recommend matching PEGAS-GONDA roller conveyors for the left-hand material feed. We will gladly prepare an offer for a complete sawing station. YOUR ADVANTAGES: Special MIRROR version with left-hand material feed Fully automatic CNC operation Directly from the manufacturer 46,299 EUR price advantage 6 months warranty Original manufacturer service Immediately available Contact us for a viewing or further information! PEGAS-GONDA – directly from the manufacturer.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Manual high-performance metal bandsaw with selectable manual or hydraulic saw frame lowering. In autonomous mode, the lowering speed is continuously adjustable via the “Push&Pull” controller. By pulling the controller, the frame maintains the previously selected speed, removing the need to reset it for the next cut. Standard Features: - Saw frame made of a robust cast construction - Heavy-duty round table with cutting channel for mitre cuts from 0°–60° to the right and 0°–45° to the left - Movable vise with adjustable guide rails and quick-release lever for repeat cuts - Oil-bath reduction gearbox with bronze gear and hardened, ground steel worm - Electric coolant pump for band lubrication and cooling - Mechanical bandsaw blade tensioning with electrical blade tension monitoring - Precise blade guidance via adjustable, ground carbide plates and ball bearings - "Push&Pull" controller for adjusting the lowering speed - Rotating swarf removal brush - Precision angle scale for angles from 60° right to 45° left - Control panel with ready-to-operate indicator, main/speed selector switch, and switch for manual or autonomous lowering mode - Emergency stop button at knee height for optimal accessibility - Microswitch in the handle for starting motor and pump (dead-man function in manual mode) - Safety switch on the saw frame guard and blade tensioning carriage - Limit switch for automatic motor shutoff after cutting - Length stop for repeat cuts - Material support on the infeed side - Bi-metal saw blade - Tools and user manual Technical Data: - Pole-changeable 400 V three-phase motor, 1.1/1.5 kW - 2 cutting speeds (33/66 m/min) - Vise clamping width: 305 mm - Working height: 940 mm - Saw blade dimensions: 2750x27x0.9 mm - Weight: 380 kg Cutting capacity in mm: 90° 255 250x250 300x200 Bsdpfoxcnqasx Aknjlp 45° R 190 180x180 190x170 60° R 110 110x110 150x110 45° L 160 140x140 170x120

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Mössner REKORD SSF630 – heavy-duty 11 kW version with manual transmission Bledps Afuqpsfx Aknep Top-maintained industrial band saw including extensive equipment Mössner REKORD SSF630 in the heavy-duty 11 kW version, equipped with a 2-speed manual transmission. The machine comes from an industrial environment, is fully functional and ready for immediate use. Equipment & Features: 11 kW drive – heavy-duty version Manual transmission Cutting speeds: 27–142 m/min and 410–2200 m/min Roller guide completely including guide rollers Feed table with 4 T-slots Mushroom-head emergency stop button LED work light Extra protective cabin (ideal for series or precision cuts; can be removed for long workpieces) Machine mounted on a steel plate – immediately stable Spare saw blades included Main technical data: Saw band length: 5180 mm Maximum cutting height: 460 mm Maximum cutting width: 605 mm Table size: 740 × 785 mm Table load capacity: 250 kg Operating voltage: 400 V Loading onto a truck is free of charge.

Condition: used, total height: 3,270 mm, total length: 2,700 mm, total width: 2,250 mm, Colour: Green Weight: 4.000 kg Price: On request - Serial number: U5624 - Main motor power [kW]: 22.0 - Wheel diameter [mm]: 1200 - Max. cutting to feed roller opening [mm]: 450 - Max. cutting to stop opening [mm]: 330 - Max. cutting height [mm]: 320 - Table width [mm]: 1000 - Table length [mm]: 1150 - Max. band saw width [mm]: 130 - Voltage [V]: 400 - Current consumption [A]: 46.5 - Fuse [A]: 63 - Power [kW]: 22.0 - Transport dimensions: 2700mm x 2250mm x 3270mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Bodjz Rz E Sspfx Aknelp VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Danobat CP 1211T Large Capacity Horizontal Bandsaw (1999) Year 1999 Condition Used Serial Number 03994700 Bljdpfez N Awmox Aknjp Stock Number 2138 Type CP 12.11 T Round Cutting Capacity 1100mm Rectangle Cutting Capacity 1200mm x 1100mm Table Height 785mm Wheel Size 1200mm Saw Band Speeds 1-77 m/min Band Tension 400L Machine Dimensions 7000mm x 8500mm 3650mm Swarf Conveyor Manual & Automatic Cycles

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Pegas 500 X 750 Horizontal X-NC 2000 Automatic Bandsaw- Year 2016 500mm Diameter Tube / 400mm Diameter Solid Bar. 750mm x 480mm Sections. +/- 45 and 60 Degrees. Bljdpjz Hfftofx Aknep 4000mm Feeder arm.

Condition: good (used), Year of construction: 1990, functionality: fully functional, A used, well-maintained vertical band saw machine, JAESPA Model MSP 4. Blsdpez Tdlaofx Aknjp Roller diameter: 420 mm Cutting height: 280 mm Cutting width: 405 mm Table size: 615 x 615 mm Table can be tilted 15° / 45° Material support height: 955 mm Band length min/max: 3200/3400 mm Cutting speed: 40-280 m/min, continuously adjustable Length: 1100 mm Width: 900 mm Height: 2200 mm Weight: 470 kg Ideal welding equipment BSO/25 Technical data and dimensions: Subject to change.

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work Bjdpfx Akevuhumsnelp general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: used, Year of construction: 2016, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 325 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30 °, actuation type: hydraulic, total height: 1,400 mm, total length: 2,050 mm, total width: 1,300 mm, overall weight: 910 kg, table height: 76 mm, Equipment: CE marking, documentation/manual, Bandsaw machine MEBAswing 320 G-HSS Year of manufacture: 2016 Cutting capacity, round at 90 degrees: Ø 325 mm / at 45 degrees: Ø 300 mm Cutting capacity, flat at 90 degrees: 500 x 300 mm / at 45 degrees: 300 x 300 mm Saw blade speed 15-150 m/min Saw blade dimensions 4200 x 34 x 1.1 mm Connection: 400V 3-phase Total power requirement 3 kW Dimensions L x W x H: 2050 x 1300 x 1400 mm Weight 910 kg Standard equipment: Quick mitre adjustment from 90° to 30° in increments of 0.5° accuracy according to the scale. The mitre pivot point is the intersection between the saw blade and Bjdpfez I Ig Nox Aknolp the material support, thus there is no change in the length dimension. At every angle setting of the saw frame, the material is clamped parallel at 90°. Coolant system with electric submersible pump Machine stand with chip collection tray Precise saw blade carbide roller guide, saw blade brush MEBA high-performance package, "HSS" version: Hydraulic raising and lowering of the saw frame and hydraulic clamping of the sawing material. Infinitely adjustable hydraulic cutting pressure and feed rate. Display of lowering speed on a scale. Display of cutting pressure on a manometer. Rapid lowering of the saw frame via push button to the material edge Frequency-controlled AC drive 15-150 m/min, 3 kW Hydraulic raising and lowering of the saw frame Including special equipment: Micro-dosing system: Economical and clean sawing: Minimum quantity lubrication with high-performance spray oil for dry chips without droplet formation. Ideal for tubes and profiles. Switching from coolant function to micro-spray nozzle. Compressed air connection required. Laser light for cut line indication/marking saw: Projects the cut line onto the sawing material and indicates the cutting channel. The workpiece can be manually aligned for a saw cut based on the marking. Clamping pressure adjustment at a fixed control panel: The clamping pressure can be manually adjusted via a pressure reducing valve. The applied pressure can be read on the corresponding manometer (in bar). Material stop 0-800mm 3 roller supports 6 new bandsaw blades High-performance spray oil Saw blade brushes

Condition: used, Year of construction: 1980, machine/vehicle number: 267, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 320 mm, cutting width (max.): 615 mm, roller diameter: 630 mm, pivoting range: 10 °, actuation type: manual, total height: 2,100 mm, total length: 1,100 mm, total width: 1,400 mm, overall weight: 800 kg, table height: 1,020 mm, Equipment: lighting, rotational speed infinitely variable, Vertical band saw, manufacturer Kölle Type ST 63 Bedpozymyhefx Aknjlp Year of manufacture: 1980 Overhang: 615 mm Maximum cutting height: 320 mm Table size: 780 x 770 mm Table surface can be tilted +/- 10° Cutting speed, continuously adjustable from 15 to 2300 m/min (3 gear stages) Band saw blade length: 4580 to 4740 mm Band saw blade welding device: IDEAL Halogen lamp Heavy-duty construction made of gray cast iron. No vibrations, even at high speeds. Due to the large cutting speed adjustment range, the machine can be used for both wood and metal. Connection: 400 V, 16 A Weight approx. 800 kg Dimensions (W x D x H): 1400 x 1100 x 2100 mm Available from November 15, 2026.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, operating hours: 6 h, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 460 mm, cutting width (max.): 600 mm, control type: PLC-controlled, roller diameter: 460 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 1,630 mm, total length: 3,200 mm, total width: 1,140 mm, overall weight: 1,200 kg, table height: 800 mm, Equipment: CE marking, documentation/manual, motor brake, Semi-automatic hydraulic band saw Double-sided miter cuts: ±60° Round cuts at 90°: 460 mm Rectangular cuts at 90°: 600 × 460 mm Round cuts at ±45°: 460 mm Round cuts at ±60°: 320 mm Saw band: 5380 × 41 × 1.3 mm Band speed: 20–100 m/min Main motor: 4.0 kW Weight: approx. 1,195 kg Power supply: 3 × 400 V MITSUBISHI PLC control with touch display Hydraulic material clamping Hydraulic saw feed Automatic feed monitoring PEGAS BRP Digital angle display Manual material feed MAIN ADVANTAGES Large cutting capacity up to 600 × 460 mm Double-sided miter cuts up to 60° Robust construction for demanding applications Hydraulic cutting cycle Stepless band speed Ideal for large steel profiles and structures 6-MONTH MANUFACTURER'S WARRANTY Warranty on spare parts and labor. In the event of a recognized warranty claim, the buyer bears the travel and transportation costs of the technician. Service rates: Travel costs: 1 EUR/km (round trip) Travel time: 25 EUR/hour Bsdpfx As Aa Dtcsknslp Technician work: 50 EUR/hour (outside the warranty) DELIVERY AND SERVICE Price: 16,000 EUR net, FCA Slavkov u Brna, Czech Republic (Incoterms 2020). Immediately available! We offer transport, installation, and operator training for an additional charge, according to our service rates. ORIGINAL ACCESSORIES PEGAS-GONDA original accessories available (see accessory price list). We especially recommend matching roller conveyors for long and heavy workpieces. We will be happy to prepare an offer for a complete sawing station. YOUR ADVANTAGES: Large cutting capacity Double-sided miter cuts ±60° Directly from the manufacturer 9,133 EUR price advantage 6-month warranty Original manufacturer's service Immediately available Contact us for a visit or further information! PEGAS-GONDA – directly from the manufacturer.

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions Bljdpfx Asxz Dqmjknop • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel