Condition: new, cutting diameter 220 mm saw band length 2450 x 27 x 0,9 mm table height 915 mm band speed 35 + 70 m/min connected load frequency 400 V capacity 90 degrees: round 220 mm capacity 90 degrees: square 210 x 210 mm capacity 90 degrees: flat 230 x 185 mm total power requirement 1,2 kW weight of the machine ca. 240 kg dimensions of the machine ca. 870 x 1550 x 1740 mm The Zimmer Z241/R is a self-lowering saw for miter cuts from 0 ° - Blodpfxsfgyh Nj Aknjp 60 ° left. After the cut, the machine stays through one Safety limit switches stand. The reduction is infinitely variable Hydraulic system adjustable. The saw arm can be raised after the cut any position. The saw arm remains at the desired position stand. The Z241 / R has the following features: Hydraulic cylinder, emulsion pump, eccentric tensioner, base, saw band, 400V Connector -16A- The machine is completely assembled and delivered ready for use.

Condition: new, capacity 90 degrees: round 255 mm Blodpfx Aefgyh Tjknep capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,42 t Double miter metal band saw, GBS 250 Super AutoCut - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Quick release vice - Massive, large material support - Automatic cooling

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t Blodpfx Akofgyiconjp dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 saw band length 5850 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,45 t dimensions of the machine ca. 5,85 x 3,6 x 2,7 m Blsdpfofgyifox Aknop 2-column band saw for quick cutting, K-tech 800H with pusher system P 15. P 30 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 saw band length 8140x54x1,6 mm band speed 15 - 90 m/min table height 855 mm Blsdpefgyigofx Aknsp total power requirement 7,5 kW weight of the machine ca. 4,96 t dimensions of the machine ca. 5,7 x 4,0 x 2,75 m 2-column band saw for quick cutting, K-tech 1200H with pusher system P 30. P 60 (option), Fast, quiet and ergonomic cutting Special development for cutting profiles and beams as well as solid material. The material is fixed vertically on and section sides. The machine is from K-tech 800 H standard with an additional horizontal vice equipped. The interaction of the hydraulic Saw frame lowering, material positioning and the Pusher system is CNC controlled. The machines come standard with the environmentally friendly “B&S-Clean Cut cutting system” with minimal quantity lubrication equipped. This saves cleaning effort and is gentle Resources. CNC Control A CNC control allows programming of up to up to 90 cutting programs with different cut lengths, Quantities and mitres. The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 820x610 capacity 45 degrees: round 550 mm capacity 45 degrees: square 550 mm capacity 45 degrees: flat 550x600 mm capacity 60 degrees: round 370 mm capacity 60 degrees: square 370 mm capacity 60 degrees: flat 370x600/450 mm saw band length 7260 x 41 x 1,3 mm band speed 15 - 100 m/min table height 800 mm total power requirement 5,5 kW weight of the machine ca. 4,8 t dimensions of the machine ca. 5,85 x 3,7 x 2,7 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Bledpfofg E Hmox Aknsp Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels Bledpfxjfg E Hpo Aknop • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Blodpsfg E Hzsfx Aknsp Real-time control of all cutting parameters

Condition: new, cutting diameter 250 mm saw band length 2950 x 27 x 0,9 mm table height ca. 800 mm band speed 36/72 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,37 t MEP sawing machine: Saw band bow, vice unit and base made of durable cast iron Precision grade marking on the cast iron structure Electrical system (with fully identifiable electrical wiring and Low voltage system 24 V) Switch handle IP 55 for manual cycles (if available) Rotating scraper brush for the saw band Clamping unit with vice for quick approach Bodpfjfg E H Iox Aknolp Accurate stops with adjustment for miter cuts at 0°, 45°, 60° left Bi-metal saw band 2950 x 27 x 0.9 mm Keys, instructions for use and instructions for ordering spare parts in the User language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cutting with automatic head feed by its own weight. CCS (Cut Control System) with (A switch for manual and automatic Cutting – B) Cutting speed regulation – C) Hydraulic brake with tank – D) End stop for stopping the belt) also optional for already produced machines available. Vice with quick adjustment Hydraulic converter for belt tension display Electric coolant pump for cooling and lubricating the saw band and manageable coolant tray above the base frame In the versions with a pneumatic vice (MA), the opening takes place and Closing the vise with a manual valve (with pedal control as option available)

Condition: new, cutting diameter 250 mm saw band length 2950x27x0,9 mm band speed 36/72 m/min total power requirement 1,8 kW Bjdpfx Aofg E H Nsknolp weight of the machine ca. 440 kg Basic equipment: Vice with quick adjustment and adjustable guide bars Hydraulic band tensioning device with tensioning pressure display Base frame with removable coolant tray Chip clearing brush Precision stops set for cuts of: 0°, 45° and 60° left and 45° right Turntable for double miter cuts Electric coolant device 48 V (A micro spray device can be installed)

Condition: new, cutting diameter 250 mm capacity 90 degrees: flat 280 x 220 mm capacity 90 degrees: square 220 x 220 mm vice 285 mm turning speed range: 36/72 m/min dimensions of saw-band 2950x27x0,9 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 485 kg dimensions of the machine ca. 1700 x 1000 x 1800 mm Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic, manual function, has a MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor switches off – Saw head rises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw band bow up to to the desired position and cycle start via the manual button.) Some features: New centralized control console on an articulated arm to allow the operator can be easily switched from any working position. Low voltage control panel: Polyester membrane keyboard with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in the user language) * Alarms (description of alarm causes) Blsdsfg E H Sopfx Aknop * State of inputs and outputs * Counting cuts * Time taken for the cut made * Current consumption of the saw blade motor * Saw blade tension * Blade speed * Numerical display of head position. Switch handle IP55 of manual 24V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for special ones Applications New, latest generation hydraulic control unit, extremely powerful and with low energy consumption. Large work surface with turntable on roller bearings, measuring 265 mm preloaded thrust bearing, mounted. Double belt speed (36/72 m/min.) with control Intended to accommodate an electronic inverter for the Continuous regulation of the belt speed from 20 to 90 m/min. Stroke of the saw bow can be programmed directly from the control panel Adaptation to the cutting material. Clamping device can be moved laterally to the left and right Quick release vice. Manually operated strap tension control with display on the screen electronic converter. Base frame with pull-out coolant tray. Electric coolant pump for cooling and lubricating the saw band. Preparation for installing the minimum blade lubrication kit (Optional), in addition to the conventional standard lubrication Emulsion oil. Chip clearing brush. The machine is intended for pallet truck transport. Length stop for cuts of the same length Material support arm with roller for attaching the loading platform Bimetal saw band for solid and profile material. Tools and instructions for use in the respective user language.

Condition: new, cutting diameter 300 mm saw band length 3320 x 27 x 0,9 mm band speed 40/80 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 670 kg How it works in the CCS version: After the material has been advanced and Once the vices have closed, the cutting process begins. The lowering is done by its own weight and is controlled by a spring balanced and a hydraulic brake cylinder regulates when the cut is carried out, the saw arm is moved by hand to the necessary position for the feed of the material is pushed up. Electrical panel (marked cable connection, indicator light for Ready for operation, safety main switch provided with padlock, Switch or speed switch, emergency stop, thermal magnetic protection, Low voltage system 24 volts) Electronic tape tension converter with on-screen display. Manual vice with quick lock Bodpfofg E H Tsx Aknolp Base frame with coolant tray and chip drawer, which has a Motorized chip conveyor (accessory) can be replaced. Electric coolant pump for cooling and lubricating the saw blade. Chip clearing brush Adjustable precision stops to make cuts of the same length. Machine is intended for pallet truck transport. Bimetal saw band for solid and profile material Tools and instructions for use

Condition: new, Model Name Blsdpjgvkafjfx Aknsp Shark 332-1 SXI evo

Condition: new, Model Name Bledpfxjgvkbcs Aknsp Shark 282 CCS

Condition: new, Model Name Shark 282 SXI evo Bjdpfx Aegvkcteknjlp

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right Blodpjfd Abaefx Aknsp - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: repair required (used), Cutting capacity round Ø 300 mm Cutting capacity rectangular 305 x 305 mm Saw blade speed approx. 25-108 m/min Saw blade drive 4 kW Incl. hydraulic saw blade tensioning Incl. coolant system Bedowqcahepfx Aknolp Incl. various replacement bands

Condition: used, Year of construction: 1991, machine/vehicle number: 113307651086088, functionality: fully functional, cutting height (max.): 260 mm, total height: 2,100 mm, total length: 2,200 mm, total width: 2,100 mm, saw band length: 4,115 mm, saw band width: 38 mm, The Kasto SSB 260 VA is a fully automatic bandsaw machine designed for precise serial cuts of solid material, pipes, and profiles. It stands out for its compact design and high cutting accuracy. The machine features hydraulic workpiece clamping, automatic feed, and a coolant system. Blodpfowqw Tvjx Aknsp Additionally, a chip conveyor is integrated to increase efficiency. Cutting range round: 10 – 260 mm Cutting range square: 260 x 260 mm Smallest cut-off length: 5 mm Single feed: 600 mm Multiple feed: max. 5,400 mm Cutting speed: 15 – 125 m/min (stepless) Saw blade dimensions: 4,115 x 38 x 1.3 mm Drive power: 4 / 6.5 kW Machine weight: 2,110 kg Machine dimensions (LxWxH): approx. 2,160 x 2,080 x 2,015 mm

Condition: new, neu Blsdpfxew Np N Ee Aknop ca. 12 - 14 Wochen ab Auf Türkei 16700 € 320.64 € Schwenkrahmen 4800x34x1,1 mm 15 - 120 m/min 360 mm 360 mm 510x360 mm rund 360 mm, quadrat 360 rund 250 mm, quadrat 220 rund 280 mm, quadrat 260 860 mm 0.37 kW 3 kW 0.12 kW 2650 mm 1210 mm 1870 mm 1450 kg Hydraulic vice Inverter for contious variable band speed Continuously adjustable saw arm lowering speed Hydromechanical blade tension can be read via pressure gauge Control panel Chip brush Coolant equipment Operating instructions in German or English

Condition: used, Automatic band saw, used but technically in good condition. Maximum capacity: Ø 260 mm Bedpfx Aew N Iw Ieknjlp

Condition: new, Year of construction: 2025, saw blade diameter 370 x 3,0 x 40 mm cutting diameter 120 mm stroke -- mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 180 x 100 mm capacity 45 degrees: round li. 120 / re. 105 mm capacity 45 degrees: square li. 100 / re. 100 mm capacity 45 degrees: flat li. 130x100 / re . 130x10 mm capacity 60 degrees: round 110 mm capacity 60 degrees: square 90 mm capacity 60 degrees: flat 90 x 100 mm total power requirement 1,8 / 2,2 kW Bledpfevuz Rnex Aknop weight of the machine ca. 392 kg dimensions of the machine ca. 700 x 900 x 1800 mm Description: - Mitre left 60° + right 45° - Clamping block with double clamping arm - Robust prism guide for the saw head (adjustable dovetail guide) - Chip brush - Automatic cooling - Metal handle for high clamping force - Solid, strong cast iron table

Condition: used, Year of construction: 1975, roll diameter 440 mm throat 420 mm workpiece height 200 mm cutting speed 20 - 1550 m/min table surface area 560 x 560 mm band length 3250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,2 x 0,8 x 2,1 m Blsdpfxevu Hb Ej Aknop Bandsaw with - Saw blade welding unit - Grinding stone - Saw bands - documentation

Condition: used, Year of construction: 2008, cutting diameter / mm saw band length / mm cutting width / mm including roller conveyor 4000 x 500 x 850 mm Sawing diameter (round): 260 mm Sawing diameter (square): 260 mm Sawing diameter (rectangular): 300 x 260 mm Bsdpfx Akewm Rqtsnslp Saw blade dimensions: 4200 x 34 x 1.1 mm High-performance band saw automatic machine, heavy-duty hydraulic production band saw Parallel sawing feed system in profile guide rails Mitsubishi NC program control E1032 for preselection of 90 sets, each with a specific quantity and corresponding cut length PLC control Mitsubishi With Siko incremental encoder Material feed with ball screw spindle 950 mm in one stroke, any desired cut length from 3 mm – 9999 mm Hydraulic material clamping with long-stroke cylinder, opening on both sides Material clamping with double vice in front of and behind the saw blade Remaining piece length in automatic mode: 90 mm Max. cutting length in automatic mode: unlimited Material support height: 850 mm Net weight: 2300 kg Dimensions W x H x D mm: 2580 x 2000 x 2000

Condition: used, Year of construction: 1971, roll diameter / mm throat / mm workpiece height / mm table-size 800x750 mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm Bedpfx Aswgi R Sjknelp - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: new, neu Bledpfxowiqt Ho Aknop ca. 4 Monate ab Auftragse Türkei 27700 € 529.07 € Doppelsäulenführung 6000x41x1,3 mm 20-100 m/min 560 mm 560 mm 750x560 mm rund 410 mm, quadrat 410 590 mm 1.1 kW 4 kW 0.12 kW 3400 mm 1000 mm 2050 mm 2045 kg 2° inclined band linear guides control panel material limit shaft coolant pump 1200 mm roller table hydraulic vice hydromechanic band tensioning inverter presser adjustment band brush optical height adjustment security switch operating manual in Englisch OPTION: turn table for mitre cuts hydraulic top clamping from above micro cooling unit laser cutting line