Bandsaw - Horizontal

GERD WOLFF KSY 550 X 700

Condition: refurbished (used), Year of construction: 2011, Used automatic hydraulic bandsaw for metal MEP SHARK 332 NC EVO Blade dimensions: 3320x27x0.9mm Mitre angle: from 45° to +60° Operating modes: manual, semi-automatic dynamic, semi-automatic, automatic Cutting speed: 15-100m/min (inverter) Cutting capacity: at 0° - round 300mm - square 260mm - rectangle 330x260mm Dimensions: 2600x2320x2000mm Year of manufacture: 2011 Weight: 1050kg The machine is fully refurbished and tested. Chjdpfxoul Svlj Ai Nea

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 417 h, Amada HFE M2 5012 press brake (2021) Manufacturer: Amada Type: HFE M2 5012 press brake Condition: used, in production and operational Year of manufacture: 10/2020 Operating hours: 6830 hours Working hours: 417 hours (still in use) Pressing force (kN): 500 Press beam length (mm): 1270 Distance between machine uprights (mm): 1035 Stroke (mm): 150 Opening width without punch holder (mm): 480 Overhang (mm): 100 Chodpfxjy Twk Hj Ai Nja Working height (mm): 920 Working speed (mm/sec): 15 Approach speed (mm/sec): 185 Opening speed (mm/sec): 185 Dimensions: Length (mm): 2585 Width (mm): 2190 Height (mm): 2420 Weight (kg): 3600 Video available.

Year of construction: 1993, condition: good (used), machine/vehicle number: 86317, Offer 25335 Technical specifications: - Nominal / continuous temperature, stepless: up to 1280 °C - Three-sided heating (bottom and sides) - Temperature control via NABERTHERM Controller C 19 - Drive: 400 V / 5.5 kW - Internal dimensions approx.: W 250 x H 140 x D 350 mm - Usable volume: 11 L - Base frame: W 900 x H 900 x D 950 mm - Required space approx.: W 800 x H 600 x D 750 mm Chedpfxsx D U Eys Ai Noa - Weight approx.: 80 kg

Condition: used, Year of construction: 2008, Material feed in any length (maximum stroke 610 mm) Cutting diameter: round 510 mm, square 500 x 500 mm Cutting speed adjustable via control: 25 - 235 m/min chip conveyor Operating manuals, wiring diagrams and spare parts lists available Only about 5,000 cutting hours Further technical data see photo or on request Chjdpfevxqtasx Ai Nea Machine weight: approx. 3 t Very good condition

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Specifications • Working Area: 2500 mm × 1800 mm • Laser Source: CO₂ laser, with available power options ranging from 60 to 600 watts, utilizing sealed-off laser technology for consistent performance • Mechanical Tools: Supports a variety of tools, including routers, oscillating knives, drag knives, kiss-cut knives, and creasing wheels • Control System: Equipped with Zünd's ZCC V3 software, facilitating precise control over cutting operations • Additional Features: o Optical registration camera for enhanced precision Chjdpowm Nu Defx Ai Nea o Integrated conveyor system for efficient material handling o Modular design allowing up to three tools to operate in parallel

Year of construction: 2004, operating hours: 15,800 h, condition: ready for operation (used), overall weight: 3,000 kg, This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine. The saw features a hydraulic clamping device that operates in both the vertical and horizontal directions. The roller conveyor on the feed side is 15 m long and is equipped with a manually controlled feed mechanism. On the discharge side, there is a 12 m long roller conveyor without a drive. • Working area – Ø / flat at 90°: 420 mm / 720 mm x 420 mm • Working area – Ø / flat at 75° left: 420 mm / 710 mm x 420 mm • Working area – Ø / flat at 60° left: 420 mm / 550 mm x 420 mm • Working area – Ø / flat at 45° left: 420 mm / 450 mm x 420 mm • Working area – Ø / flat at 30° left: 420 mm / 250 mm x 420 mm • Working area – Ø / flat at 75° right: 420 mm / 710 mm x 420 mm • Working area – Ø / flat at 60° right: 420 mm / 550 mm x 420 mm • Working area – Ø / flat at 45° right: 420 mm / 450 mm x 420 mm • Working area – Ø / flat at 30° right: 420 mm / 250 mm x 420 mm • Smallest material dimensions – Ø / flat: 10 mm / 10 mm x 10 mm • Smallest cutting length (90°): approx. 90 mm • Remaining cutting length (manual, 90°): approx. 90 mm • Cutting speed: 10–120 m/min Csdpfx Aijx D N Amo Nsha • System/belt tensioning pressure: 95 bar • Connected load: approx. 9 kW • Voltage: 400 V, 50 Hz • Control/hydraulic valve voltage: 24 V DC • Current consumption: approx. 18 A • Fuse protection: 35 A • Cable cross-section: min. 4 x 6 mm² • Material support height: 800 mm Additional equipment • Silberland B 660 powered roller conveyor, 15 m (year of manufacture: 2010) • Chip conveyor (0.15 kW motor)

Condition: good (used), Year of construction: 1995, machine/vehicle number: 2-025-12-934, Offer 26200 Technical specifications: - Maximum working length: 1250 mm - Stand clearance: 1020 mm - Maximum pressing force: 25 t - Press pressure regulation via manual control - Digital display for pressing depth + rear stop - Overhang: 200 mm - Table height approx.: 1000 mm - Stroke of the lower press beam approx.: 80 mm - Drive power: 3 kW - Rear stop adjustable via handwheel: 500 mm - Electric foot pedal - Space requirement approx.: W 1600 x H 1800 x D 1200 mm - Weight approx.: 1.3 t Chodpfjzn Rd Tox Ai Nsa

Condition: excellent (used), Year of construction: 1999, Hours: approx. 24,000 6 axles Csdsznip Ijpfx Ai Njha Location available upon request.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, power: 5.5 kW (7.48 HP), type of input current: three-phase, cutting height (max.): 650 mm, cutting width (max.): 1,050 mm, overall weight: 4,300 kg, empty load weight: 4,300 kg, coolant pump power: 120 W, cutting range round steel at 90°: 650 mm, cutting range square steel at 90°: 650 mm, height adjustment type: hydraulic, roll diameter: 650 mm, saw blade length: 8,330 mm, saw drive: 5,500 W, Excellent working conditions Chsdpfx Aoxwch Nei Nja

Condition: excellent (used), Year of construction: 2009, operating hours: 8,100 h, AMADA PROMECAM MODEL HFE 5020 50 TONS CAPACITY X 2000 year 2009 specification 7 AXIS CNC HYDRAULIC DOWNSTROKING PRESS BRAKE CAPACITY 50 TONS CONTROL OP 2000 CNC NO OF AXIS SEVEN X 1 X 2,Y 1 Y 2, R 1 , Z1 & Z2 Cjdpfxszn Afvo Ai Neha BENDING LENGTH 2000 mm OPEN HEIGHT 470 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR SIZE 7.5 KW APPROACH SPEED 100 BENDING SPEED 10 RETURN SPEED 100 SERIAL NO.V090090 GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING REAR INTERLOCKED year 2009 price POA specification