Band Saw - Automatic - Horizontal

BERG & SCHMID K-tech 60/48 CNC VS 500

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Bwjdpfoiyyf Iox Ak Eel Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Cutting range 90° Round: 260 mm Flat: 300 x 260 mm Smallest diameter: 5 mm NC-controlled, automatic material feed with hydraulic full-stroke material clamping Easy operation via NC control with plain text display Material advance function without reclamping for short section cuts Robust, linear-guided feed gripper with servo positioning for maximum precision Automatic adjustment of blade guides to material width Bwjdpfxjh Tnd Ao Ak Ejl Recommended options: Powered chip brush synchronized with blade speed Separate control panel 7" CE panel, network-compatible, up to 1000 data sets storable, history memory for various functions and data, etc.

Condition: new, TECHNICAL DATA type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t Bsdeg Dgymspfx Ak Eewl PLC: Siemens S7

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for Bsdjd Iipmjpfx Ak Eswl series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Year of construction: 2004, condition: ready for operation (used), A fully automatic Kasto band saw system is available. Cutting range at 90°: round material: 530mm, square material: 530mm/530mm, flat material: 530mm/640mm, saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions X/Y/Z: approx. 5200mm/2700mm/2700mm, weight: approx. 6000kg. Including roller conveyors. Documentation available. On-site inspection is possible. Bsdpfx Aev S E Edjk Eowl

Condition: new, Screw compressor with refrigeration dryer Bwodpfswm Ih Ajx Ak Esl Belt-driven. Space-saving. Affordable. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Refrigeration dryer: Attached, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Installation data: Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Noise level 68 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight: Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 525 mm Bwsdpfx Aotqqmhek Eol z-travel 500 mm table surface area 1000 x 543 mm spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z axis 18 / 18 / 15 m/min table load max. 350 kg control HEIDENHAIN MillPlus milling-head swivable +/- 90 ° total power requirement 26 kVA weight of the machine ca. 4,2 t dimensions of machine L x W x H 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant

Year of construction: 2006, condition: refurbished (used), HYDRAULIC PRESS MECAMAQ Bwsdpfxsfmqqlo Ak Eol PRESSURE 350t STROKE 350mm TABLE LEFT RIGHT 600mm TABLE FRONT BACK 750mm POWER 15kw Dimensions: Height: 2,9m Width: 1,9m Length: 1,3m Weight: 5.700 kgr

Condition: used, Year of construction: 2017, fuel type: diesel, Equipment: cabin, * Anfragen gerne per WhatsApp * LInde H 80-3/900 * Diesel * EVO * 8000 kg NL * 14055 kg GG * 3+4 Steuerkreis * Klima * Straßenbeleuchtung * Arbeitsbeleuchtung * Rundumlicht * Rückfahrcamera * Reifen 8.25-R15 * 315/70R25 * deutsches Fahrzeug * 1. Hand * gegen Aufpreis mit Mehrpalettengabel * · Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, · Verkauf nur an Gewerbe, Transport zum Hafen möglich, Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. · Keine Gewähr auf Eingabefehler. Besichtigungen nur nach Vereinbarung, WhatsApp Bodpfjn E Sxgex Ak Eewl

Condition: used, machine/vehicle number: 7979, Table Ø: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Bwjdpfxjb Ez R Uo Ak Esl Space requirement: 600 x 450 x 175 mm Weight: approx. 100 kg