Condition: not inspected (used), Year of construction: 2000, Functionality: unexamined, Straight-cut band saw, cutting capacity up to 450 mm wide The machine was part-exchanged and reportedly worked until the customer's last use. Fgslq Sowhmpbs E E Esb "This is a used machine whose functionality has not been tested. The sale is made without any warranty."

Condition: excellent (used), Functionality: fully functional, sheet thickness steel (max.): 3 mm, sheet thickness (max.): 3 mm, outer diameter: 80 mm, HEAVY-DUTY HIGH-PERFORMANCE TUBE MILL OTO 80.3 QTC With complete Quick Tool Change System Made by OTO MILLS PRODUCTION RANGE • Diameter range 19mm – 80mm • Thickness 0.8mm to 3.2mm • Speed Max. 150 m/min • Working direction Left - Right Scope of supply: 1. Entry Line made OTO MILLS with: • Double Uncoiler OTOAD256 -PA • Double strip peeler for opening from top/bottom • Automatic strip joiner OTO GG254 • Floop vertical accumulator 2. OTO 80.3 QTC tube mill made OTO MILLS with: • Casted Iron stand • Bottom shaft height adjustable • Reinforced motor and gearboxes 2-speed transmission • Hydraulic nuts • Double length cooling tunnel • Motorised turk-head for fast adjustment 3. Quick change rafted system OTO QTC - 2nd set of cassettes off-line including : • 1 complete cassette for forming • 1 complete cassette for fin-pass • 1 complete cassette for sizing • Quick – plug automatic cardan connections 4. 150 m/min Flying saw – High Speed cold saw OTO TCCG160 with : • Carriage motion with 70kW motor • Cutting head motion with hydraulic control • AC Rotation of the blade 5. Automatic packer MAIR SQ.HEX.90.D.5.SL with emulsion draining and bundle weighting system • Possibility to make hexagonal and square/rectangular bundles • 5 modules for production of tubes 4-10m (12m for thickness >1.8mm) • Including emulsion draining, and weighting unit • 3 chains for finished bundle storage • Test tube zone, with cutting saw for the test tube 6. Automatic strapping unit SIGNODE M400 7. Zinc spraying METALISATION 250 • 1 metallisation cabin • 1 zinc spraying unit METALLISATION ENERGIZER 250 • 1 Zinc spraying gun ARCSRPAY 528E 8. Fume exhaust system Felq S E Ejvr Tnto Ejgb • Fume exhaust conducts and exhaust covers on the required points a • Filter for fumes 9. Complete set of rolls (*See details) NEW PARTS SUPPLIED IN 2023/2024: 10. Thermatool CFI 350-VF Solid state welder with : • Automatch • Selectable frequency 250-400kHz • Thermaview control panel 11. Cooler PARKER, Model hyprechill Maxi 12. Inner scarfing hydraulical Blissenbach, with all the toolding for ID 30-50m 13. OPTRONIC CNC control unit for driving flying saw (Switzerland) 14. New Emulsion plant with : • Pump and heat exchanger • Fillters • Electrical controls and monitoring 15. New motor and electritical cabinet for accumulator 16. New motor and control for sizing section

Condition: new, Year of construction: 2025, Functionality: fully functional, New unwinding reels ready for delivery capacity 500Kg; 1,000kg; 2,000kg Fgelqewhmmyo S E E Eeb

Condition: new, With digital technology, the NEOPULSE 400 CW is a three-phase pulsed MIG / MAG generator for heavy industry. Mobile and equipped with a cooling unit and a high-performance unwinding system, the NEOPULSE 400 CW is Felq S Ejmxkggs E Ejgb ideal for tackling the most demanding applications. Intuitive and functional, its digital interface makes it possible to act on the welding parameters with ease. MULTIPROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - Flux-cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulosic electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Condition: used, Functionality: fully functional, For sale aRuhla type band saw in working order. Fgolq S Eeva Ex To E Eob

Condition: good (used), Year of construction: 2011, Traverses XYZ: 762 x 435 x 510mm, table size 920 x 435mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Fslq Sewgcate E E Esgb Through Spindle Coolant, Low Volt Light, Swarf conveyor,

Condition: excellent (used), Year of construction: 2020, operating hours: 4,181 h, Functionality: fully functional, machine/vehicle number: SB4568, ROBOTICS: 1 MAG welding robot, 6 axes, model AR2010, equipped with its YRC1000 control cabinet. 1 robot control panel with color touchscreen. 1 R2L type positioner with five controlled axes. The load capacity is 250 kg per workstation. The usable volume is represented by a cylinder with a 1600 mm diameter. 5-axis control system. 1 relocation system via 200 Volt wire. 1 DeviceNet welding control card. ENCLOSURE & SAFETY: 1 enclosure made of sheet metal panels. 1 operator panel. 1 operator loading station secured by a light curtain, a pre-reset button, and a two-color signal light. MAG WELDING EQUIPMENT: Felq Sowhl N Hs E E Eegb 1 MIG/MAG welding power source, brand FRONIUS, model TPSi 400 CMT with: - WF25i-R 4-roller wire feeder - CU-1400i water cooler - robot control interface - WF60i-WR water-cooled torch - wire block 1 mechanical torch cleaning system, MOTOMAN Type TCS-C EXTRACTION: KEMPER Filtration system included

Condition: good (used), Year of construction: 2015, Functionality: limited functionality, workpiece weight (max.): 270 kg, laser power: 80 W, type of cooling: air, total width: 70 mm, total height: 100 mm, total length: 110 mm, overall weight: 270 kg, height adjustment type: electric, space requirement length: 280 mm, ambient temperature (max.): 30 °C, Trotec Speedy 300 printer with atmos duo plus f9 230 V vacuum cleaner. Year of manufacture: 2015 POWER 80 W It was purchased in 2016. Felqovyr Uzj S E E Ejgb It is functional but the laser cannon needs to be recharged. It has extensive dust protection inside the laser. Intuitive JobControl® software included for easy use, suitable for beginners and experienced engravers. Ideal for starting a business or increasing production capacity with minimal maintenance and maximum uptime. Developed and produced in Austria, it guarantees first-class components and productivity. The fastest laser engraving machines on the market, with a maximum processing speed of 3.55 m/s and 5g. Suitable for a wide range of applications with endless possibilities. Designed for flexibility and ease of use, compatible with the most common graphics programs.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 850 h, Functionality: fully functional, machine/vehicle number: 14089165, Fully functional machine with a large number of punches and other accessories Fjlq S Eowhl Aae E Eegb

Condition: new, The NEOMIG-i 500 G is a three-phase multiprocess welding machine with separate wire feeder. Its advanced digital technology and its duty cycle ensure excellent arc characteristics for industrial MIG/MAG applications. The integrated synergies facilitate setup and reduce spatter during welding. Equipped with the WF wire feeder, it offers a control precise welding parameters to ensure perfect quality. MULTI-PROCESS MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - flux-cored wire (reverse polarity) : Ø 0.9 to 2.4 mm Fslemxkdpjq S E E Eegb MMA DC / Pulsed : basic, rutile and cellulosic electrodes. TIG DC Lift / Pulsed. Gouging.

Year of construction: 2015, operating hours: 300 h, Condition: excellent (used), Functionality: fully functional, A three-roller pipe bending machine is for sale. The machine comes with the bending tools shown in the pictures, in various sizes. D 21.5 mm 6pcs D26 mm 3pcs D 27 mm 3pcs D 31 mm 3pcs D 34 mm 3pcs D 35 mm 3pcs D 41 mm 3pcs D 43 mm 3pcs D 48 mm 3pcs D51 mm 3pcs Spacer plates for closed section with a diameter of 75.5 mm: 2.5 mm 2pcs 3 mm 1pc 5 mm 2pcs 6.5 mm 2pcs 7.5 mm 2pcs 8.5 mm 4pcs 9.5 mm 2pcs 10 mm 2pcs 12.5 mm 2pcs 15.5 mm 2pcs 20 mm 2pcs 25 mm 2pcs Fgslq S E Eeva Efae Eob 30 mm 2pcs 35 mm 2pcs 40 mm 2pcs

Condition: good (used), Year of construction: 1979, Functionality: fully functional, machine/vehicle number: 1054, grinding length: 400 mm, grinding width: 150 mm, Table length: 400mm Table width: 150mm Maximum cutting length: 400mm Fslq Ssr Eq U Se E E Ejgb Maximum grinding width: 150mm Maximum workpiece weight: 75kg Distance spindle to table: 400mm Table speed 1-24 m./min. Sharpening stone diameter: 25mm Spindle speed: 900 – 4500 rpm. Year of construction: 1979

Condition: new, Year of construction: 2025, Functionality: fully functional, spindle motor power: 4,200 W, turning length: 180 mm, turning diameter over cross slide: 26 mm, turning diameter: 26 mm, spindle bore: 26 mm, overall weight: 2,400 kg, rotational speed (max.): 10,000 rpm, type of input current: three-phase, bar passage: 26 mm, feed length Z-axis: 180 mm, machining length: 180 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, warranty duration: 12 months, Equipment: rotational speed infinitely variable, LINEAR LATHE ITWIN S Additionally with swivel head With a total of 29 tools, complex parts can be machined externally, internally and on the circumference on the iTwin S. The counter spindle allows backworking in one set-up.12 driven tools, 2 C-axes as well as Y-axis offer additional flexibility. The machine is very well suited for machining from bar as well as for machining inserts. As iTwinS, the machine is additionally equipped with a swivel head (B axis) on the main spindle. For inclined machining, 12 driven tools are available. Fslq S E Eovb Hybs Eegb The B-axis makes it possible to use the driven tools flexibly on the face or shell surface (90° swiveling).

Condition: good (used), Year of construction: 2006, Machine used only for plastic. Technical details shown in attached pdf document. Parts shown by hand not come. Fgjleu Ibihjq S E E Ejb

Condition: reconditioned (used), Year of construction: 2018, operating hours: 3,425 h, Functionality: fully functional, The device was completely overhauled before sale. The perfect welding machine Fgjlqowhlzij S E E Ejb

Condition: reconditioned (used), HYDRAULIC GUILLOTINE SHEAR GADE MOD. CO 40/6 MACHINE FULLY RECONDITIONED CUTTING ANGLE ADJUSTMENT MOTORIZED BLADE GAP VISULIZATION STROKE REAR REGISTER CUTTING LENGTH MM 4050 CUTTING CAPACITY MATERIAL MAX MM 6 CUTTING ANGLE AT DEGREES 1° - 2° 30 ' REAR REGISTER MM 1000 SPEED MM/SEC 65 DISTANCE TRALE SHOULDERS MM 4150 INCH MM 500 WORKTABLE HEIGHT MM 930 ENGINE POWER KW 15 TANK CAPACITY LT 110 MOTORIZED REAR REGISTER MM 1000 DIMENSIONS MM 4550 X 2050 X 2280 (H) APPROXIMATE WEIGHT KG 10.000 USE AND MAINTENANCE MANUAL INCLUDED CUTTING RECOVERY : -CLEANING of the machinery before disassembly. -Bench disassembly of the pair of BLADES with respective cleaning of the bench and anchors. -Polishing of the blade edge with stone with the purpose of removing small burrs. -Check condition of the BLADES and evaluation of the blade turn. -Remounting with respective adjustment and cutting test. -LUBRICATION check : -Check of the LUBRICATION SYSTEM and search for any leaks. -PUMP CLEANING*manual delivery and lubrication. -WASHING OF THE LUBRICATION SYSTEM and checking the efficiency of the NOZZLES. -Loading of LUBRICANTENUOUS oil and LUBRICATION test. LAMIER PRESSURE restoration : -Bench disassembly of the PISTONS. -Polishing of the stem with the aim of eliminating small "seizures." -Cleaning and polishing of the sliding chamber. -Replacing the SEALS with new ones. -Reassembly of each individual piston and bench test. -Reassembly and shear test. Checking OLEODYNAMIC CYLINDERS : -Oil leakage monitoring. -Check of delivery and return PIPES with respective fittings. -Check of "anchors" and support brackets. -Shear test at MAXIMUM PRESSURE in order to check for possible failure or cracks in the seals. OLEODYNAMIC PIPES check : Fgslq Sslp Ithe E E Ejb -Monitoring of hoses and respective fittings. -Check for possible leaks with contrast liquid OLEODYNAMIC POWER PLANT check : -Complete washing of the OLEODYNAMIC PLANT. -Control unit TANK cleaning. -Replacement of FILTER. -Bench cleaning of control VALVES with respective replacement of RING SEALS with new ones. PAINTING in original colors : -Complete degreasing of the machinery using NITRO DILUENT. -Plastering and shaving of the most obvious parts. -Application of BASE. -POLISHING of the components. -EPOXILICARAL varnishing. REAR REGISTRY check : -Dismantling crankcases suitable for checking and cleaning the moving parts. -Lubrication of SCREWS and SCREWS. -Adjustment of BEATS. -Functional check with possible restoration of MICRON. Securing FIXED PROTECTIONS: -Replacement of front PROTECTION with NEW one suitable for the type of work. -Application of existing SIDE PROTECTIONS. Electrical SAFETY : -Application of PEDESTRIAN with EMERGENCY restraint and 5 m cable. -Replacement of the CONTINUOUS system on the control panel with application of EMERGENCY to Restraint. -Control of safety MICRONs.

Condition: good (used), Year of construction: 2002, Functionality: fully functional, type of input current: three-phase, For sale is a grinding-polishing machine. It can be connected to a dust extractor. Little used, in working order. Fslq S E Eeva Elgo Eegb

Condition: new, Year of construction: 2023, X= 3500mm Y= 1200mm Z= 1500mm Fslq S Eshqhq Ne E Ejgb carousel dressing table Ø 1.250mm Clamping table 3.500 x 1.000mm Control Heidenhain automatic indexing milling head / 2 planes, 90°|45° / 2,5° x 2,5° Splash guard 5-sided Cable handwheel 2xchip conveyor 60 tool changer

Condition: used, Year of construction: 2010, operating hours: 12,250 h, Functionality: fully functional, Band saw. We've always been happy with this saw, but we're selling it due to discontinuation. Some NEW band saw blades for replacement are also included as a bonus. Fgolewhlwwjq S E E Eob

Year of construction: 2023, Condition: new, AXA MOVING CYLINDER ELECTRO-HYDRAULIC PRESS. Fgslq S Ejlruhdo E Esb 150-ton power. Automatic double speed with rapid. Moving cylinder stroke 816 mm transverse. Internal clearance from shoulder to shoulder mm 1500 Rod stroke mm 300 GALTECH distributors. - 2MP block. - No. 2 VIVOIL external gear unidirectional pumps. One for rapid approach and return (calibrated at 20 bar) and one with adjustable pressure with handwheel to set the required power. - Pressure relief valve with mechanical lock to prevent overpressure. - Standard pressure gauge to display power output. - INTECH electrical panel certified according to current regulations and with independent CE marking.

Condition: new, Year of construction: 2023, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,600 mm, Heidenhain / Siemens control Water-cooled inline motor 43 kW / 900 Nm Travels: Folq S Eoqy Hinj E Eogb X= 4,000 - unlimited Y= 2.600 / 3.200 Z= 1.600 Milling heads: 2.5°x2.5° / 1°x1° / 0.001°x0.001 / quill Further equipment: Tool changer 40 / 60 / 80 / 100 NC tables Plate fields Carousel rotary tables Chip conveyor Fully automatic milling head changing system Pendulum machining Splash guard cladding Operator-supporting technology packages

Condition: new, OMEC 3-roll mechanical symmetrical rolling calender. New "CE. Made in Italy. Ready for delivery except sold. General characteristics. Working envelope : mm 1330. Upper and lower roller diameter : mm 90. Side rollers diameter : mm 95. Thickness : mm 2 - 2.5 - 3. (1.5 X D 3 X D 5 X D ). Hardening of rollers HRC : 55/60 depth 2 mm. Installed power : Kw 1.1. Dimensions : mm 800 x 2100 x h 1100. Weight : Kg 490 The FX3.2 series distinguishes MECHANICAL CALENDERS with 3 ASYMMETRIC ROLLERS with simple complete invitation. The side roller (bending roller) is motorized as standard, for raising and lowering. The rotation of the rollers in these machines is applied to the upper and lower rollers by a self-braking motor coupled with a gearbox. Manual clamping of the sheet ,is performed by the bottom roller ,by a straight up-and-down motion using a bearing system. Fgolegyk Sueq S E E Esb All machines are equipped with a movable control pedal board as standard. The simple operation of these machines, combined with the roll hardening and conical device, is an excellent compromise between quality and economy of processing. Equipped with the machine Optionals supplied : Front conical device. No. 01 digital display for side roller position.

Condition: new, Year of construction: 2023, Longitudinal x 10000 mm Vertical Y 2200 mm transverse Z 1300 mm Felq Sjglpz Rj E E Ejgb tool holder ISO 50 Control Heidenhain TNC 640 milling head 2,5° 6000 rev. IKZ changer 60 pockets panel field 11000 x 2500 x 300 mm

Condition: new, OMEC 3 rollers mechanical symmetrical double invitation rolling machine New "CE Made in Italy USEFUL IN WORK mm 2050 DIAMETER OF THE UPPER ROLLER mm 150 LOWER ROLLER DIAMETER mm 150 LATERAL ROLLER DIAMETER mm 150 MAX CALENDER THICKNESS 1,5 x D mm 4 MAX CALENDER THICKNESS 3 x D mm 4,5 MAX CALENDERING THICKNESS 5 x D mm 5 MACHINE DIMENSIONS : mm 920 x 3400 x 1100 TOTAL POWER INSTALLED : Kw 6,5 WEIGHT : KG 1700 The FX3-3 series distinguishes the mechanical asymmetrical 3 ROLLERS calenders with simple FULL INVENTORY. The side roller (bending roller), is assembled as standard with steel supports and bearings and on the outside bronze pads which guarantee maximum reliability and minimum friction. ensure maximum reliability and minimum friction over time. The rotation of the rollers is applied to the UPPER and LOWER rollers by means roller by means of reducer and self-braking motor, as well as the translations and the sheet metal clamping by means of motors and reducer of the best brands. reducer of the best brands. Equipped with roll hardening, motorized translation and clamping, prearrangement for mounting curved rollers and conical device conical device positioned directly in the upper roller, they are today the best compromise of absolute quality and easy easy to use by the operator for the most varied cylindrical and conical calendering processes. Fgslqjgyk S Ae S E E Eob As standard, the upper roll is opened from the side in order to extract the rolled plate. MACHINE CONFIGURATION: MOTORIZED UPPER AND LOWER ROLL in rotation with equal power. [...]

Condition: excellent (used), Year of construction: 2007, Synchronized hydraulic press brake MECOS Mod. Syncro 200/4000. Numerco ESA KVARA control. NR.07 Controlled axes (Y1-Y2-X-R-Z1-Z1-Z1) WILA automatic compensation table. Fjlq S E Esv S Ad Rs Eegb Pneumatic tool attachment: Type Promecam, Tecnostamp H=150 mm. Useful bending length: mm 4050. Power exerted: Ton 200. Front safety devices: DSP LASER. Weight: kg 24,000.