3
Catalog No. : 5723
Type: GDK 750
Producer: Weingarten
Made in: 1987
Characteristic:
Gyayqs
Clamping force: 866 t
Brettgröße: 1280x1280 mm
Distance Between Tie Bars: 790x790 mm
Tie Bar Diameter: 165 mm
Closing Stroke: 850 mm
Opening the mold: 400-900 mm
Injection force: 73 t
Injection Positions: 40/170/300 mm
Weight: 36000 kg
Machine dimensions:: 8250x2000x3400 mm
Equipment:
Krownmatic KM 1200 furnace (2011)
10
bore capacity in steel (diameter) max. 40 mm
throat 350 mm
bore stroke max. 170 mm
column diameter 150 mm
threading M35
work table:
table surface area 530 x 530 mm
max. table load 250 kg
T-slots 3x 16 x 125 mm
distance spindle /table 130 - 725 mm
boring spindle
turning speed range 90 - 1.520 min/-1
transmission ratio 8
quill stroke 170 mm
spindle taper MK 4
distance spindle/base plate max. 1.210 mm
base area 480 x 435 mm
Dxuoye
T-slots 2x 18 x 150
total power requirement 2,2 kW
weight of...
closing pressure 240 kN
clamping plate 380x380 mm
distance between columns 250x250 mm
weight of the machine ca. 3000 t
lock stroke 180 mm
capacity of ejector 30 t
ejector stroke 50 mm
height of form 120-300 mm
column diameter 45 mm
casting capacity 40 kN
casting plunger stroke 85 m/m
injection plunger diameter 36, 40, 45 mm
casting volume (DIN 24480) 39, 56, 79 cm³
volume cast pressure 392, 317, 250 kp/cm²
casting area 61, 76, 96 cm 2
Bjkywl2cdr
Traverse Stroke 105 m/m
Used Die Casting machi...
6
Melting Capacity (Aluminum): 2,000 KG per hour / 4,400 pounds per hour
Bath Capacity: 3,000 KG / 6,600 pounds
9adn3ew8
Maximum Bath Temperature: 740 C / 1364 F
Burner System: 2 Melting - 1 Holding / 2 Melting - 1 Holding
Type of Burner: Medium Speed Gas Burner / Medium Speed Gas Burner
Fuel: Natural Gas / Natural Gas
Total Burner Rating: 1,250 KW / 42.67 Therms
Controls: Allen Bradley SLC 5/04 / Allen Bradley SLC 5/
10
Coating sprayer - casting molds.
Note: There are no communication cables
Ctytvj7s
6
Operational hours counter: ca. 40,000h, machine is not ready for use, including Furnace STRIKO W00 SL Xp, Sprayer WOLLIN PSN T3SP, Extraction Robot REIS and cooling basin.
Basvwmzyu
2
Catalog No. : 5724
Type: GDM H-400B DC
Producer: Bühler
Made in: 1991
Characteristic:
Clamping force: 4600 kN
B2i2kpihje
Brettgröße: 990x990 mm
Distance Between Tie Bars: 640x640 mm
Tie Bar Diameter: 120 mm
Opening the mold: 250-780 mm
Injection force: 240 kN
Weight: 16600 kg
Machine dimensions:: 7500x2500x2400 mm
6
I sell a FRECH DAW 315 clay hot chamber zinc die casting machine with good condition.
Uocdrzc
closing pressure 3150 kN
clamping plate 900x900 mm
distance between columns 550x550 mm
weight of the machine ca. 15,5 t
lock stroke 500 mm
capacity of ejector 159 kN
ejector stroke 120 mm
height of form 300-700 mm
column diameter 110 mm
casting capacity 158 kN
casting plunger stroke 250 mm
injection plunger diameter 70,80,90,100 mm
casting volume (DIN 24480) 514,791,1105,1455 cm 2
volume cast pressure 410,316,249,201 kp/cm²
casting area 768,996,1265,1597 cm 2
Traverse Stroke 300 mm
Bjkywcj3pq
...
5
pressure: t
throat: mm
distance table/ram: mm
lockforce: 30 (300kN) t
casting capacity: 42 kN
lock stroke: 180 mm
casting plunger stroke: 85 mm
casting volume (DIN 24480): 39 - 56 - 79 cm²
ejection stroke: 50 kN
force of ejector: 36 kN
height of form: min./max.: 120/300 mm
Nm9kn
clamping plate: 2 Stück = 405 x 405 mm
total power requirement: 9,0 kW
weight of the machine ca.: 3,2 t
dimension machine xH: 3,95 x 1,7 x 2,20 m
dimensions electric cabinet LxWxH: 0,9 x 0,45 x 2,10 m
Hot chamber die ca...
1
capacity 6 tons aluminium
electrically heated
power 51 kW, 78 A
Ucfuj3vje
nominal temperature 1000°C
length 3600 mm
width 2200 mm
height 2700 mm
weight 15 to
tiltable by overhead crane
6
Including Furnace STRIKO W1200 SL Pro Dos, Punching Machine REIS Sep 13-65 SKT and cooling basin.
Cav2jffcux
3
Automated high pressure die casting machine Bühler. 800 ton clamping force.
Bgreypzhul
Machine is DISMANTLED
15
For sale is a refrigeration unit from
LETHIGUEL
THERM HDK 4
Year of manufacture 2013
241 TECHNICAL DATA Lethiaue!-themat"-Hochdruchhenlezt
Working pressure 120
Water flow bar 120I/min
Permissible working overpressure
bar
Water inlet temperature max
Sound pressure level Lp
°
nominal voltage-current type
25
170
dB(A)
65
400 V 3Ph N PE AC 50 HZ
Control voltage
VIDC
24
Rated current
Rated power
Amp.
kW
Jxycj3
7.5
2.0
Protection class
IP54
Motor power
High pressure pump at 1000 rpm kW
Feed pump
at 28...
closing pressure 2200 kN
clamping plate 755x755 mm
distance between columns 500x500 mm
weight of the machine ca. 8 t
lock stroke 430 mm
capacity of ejector 110 kN
ejector stroke 100 mm
height of form 250-600 mm
column diameter 85 mm
casting capacity 130 kN
casting plunger stroke 175 mm
injection plunger diameter 70,80,90 mm
casting volume (DIN 24480) 450,636,856 cm ³
volume cast pressure 335,260,203 kp/cm²
casting area 656,846,1078 cm 2
Traverse Stroke 230 mm
Used Die Casting machine DAW 200...
15
2) Bühler H 630B Bühler Brescia 2014
Pr. Nr 10.148.601
Komplet casting cell
Peripherie:
Wollin PSM 2 – Baunummer 2048 Wollin GmbH 2001
West.650SL Prodos Striko Westofen ;Baunummer10561 2008
Kawasaki FS 020-540P(v.č.540P) Kawasaki 2007
Diesse Presse T35 NG č.13(2670) Diesse Presse 2007
H9uhwyvmk
Thermobiehl 2x24 kW (L-0417)
Thermobiehl 2x24 kW(L-0252)
Thermobiehl 2x24 kW(L-0002)
5
Die casting machine DYNACAST with spraying system. Machine is not under power. Many accessories: spare parts, drawings, etc.
Qlur7rfb
6
Including Furnace STRIKO W1200 SL Pro Dos, Punching Machine REIS and cooling basin.
Swb8a0
4
Automated high pressure die casting machine Bühler. 700 ton clamping force. Air conditioning KMA / Bentleon type Ultravent / AFS 6000 (2000)
Machine is DISMANTLED
Kzmkfe37
11
I sell an aluminum die casting machine Bühler SC D/42 with good condition.
B78tlyahmt
closing pressure 900 kN
clamping plate 540x540 mm
distance between columns 350x350 mm
weight of the machine ca. 5,5 t
lock stroke 280 mm
capacity of ejector 60 kN
ejector stroke 70 mm
height of form 160-400 mm
column diameter 65 mm
casting capacity 75 kN
casting plunger stroke 130 mm
injection plunger diameter 50,55,60 mm
casting volume (DIN 24480) 119, 163, 214 cm 2
volume cast pressure 380, 315, 265 kp/cm²
casting area 236, 285, 340 cm 2
Traverse Stroke 150 mm
Used Die Casting machine DAW ...
15
Die Casting Maschine Bühler-B53DV GO - overhoul in 2015
Cnt7y228
Complete casting cell
Peripheries :
PSM 2 Wollin Jahr 2006
Diesse Presse T35 NG
Kawasaki FS 020 Jahr 2007
Westomat 650SL ProDos3 Striko Westofen 2021
Hüttenes Albertus Hüttenens Albertu Gmbh 2003
Thermobiehl č.52
Thermobiehl č.2
7
Die casting cell, consisting of die casting machine, manufacturer ItalPress, model IP1350SC, serial no. 2372, year of manufacture 1996, clamping force approx. 1,350 t, plus
- Holding furnace, manufacturer StrikoWestofen, model W900SL-DG, furnace volume approx. 820 dm³, serial no. 6497, year of manufacture 2000,
- spraying unit, manufacturer Wollin, type BSM3F, year of construction 2012, unit no. 3381
- unloading robot, manufacturer Kuka, 6-axis
- cooling basin
- trimming press, manufacturer FKS,...
6
Including Furnace STRIKO W1200 SL Pro Dos, Punching Machine REIS and cooling basin.
Dpob7im7
2
ITALPRESSE PRESS IP2150
Island in phase of installation - RFN01
Composed by the following machines and almost machines:
1. italpresse industrie press mod: ip2150sc matr 3170 year constr.2004 pressure 140 bar
2. the electric board is equipped with plc siemens s7-400 euroelettronics s.r.l. via brolo, 58/a 25075 nave (bs). incomplete, the control console is missing
3. metal dispenser
4. robot abb. at a.m. tech srl via dei mulini, 156 travagliato (bs). robot without control panel
5. structure with c...
11
The machine was up to short under power. With running condition. With oven and tempering unit
Pbirr
heating capacity 2 x 20 kW
Gxn8co
Cooling capacity 2 x 40 kW
Used heating and cooling unit from Robamat for die casting machines.
This two-circuit device is designed for the temperature control of die casting tools with oil.
Circuits: 2
Flow temperature max. 320°C
Heating capacity 2x 20kW
Cooling capacity 2x 40kW
Voltage 3x 400V / 50Hz
13
COLDCHAMBER-HORIZONTAL DIE CASTING MACHINE
manufacturer ITALPRESSE
type M550
year of manufacture 1988
Revidiert & modernisation 2002
EQUIPMENT
with dosing ladel Italpresse linear
free programmable command SIEMENS S7
Operator Panel IP Gefran
3-phase injection system with intensification
Lgbu9xen
central autom. die height adjustment
core pull units I+II M
hydraulic stroke limitation system
automatic central lubrication
Motorized safety door operator side
Motorized safety door back side
hydraulic...
4
Guide columns for die casting machines -BÜHLER -H 400 B
4 pieces / new
Njap9zmd
6
The die casting machine needs overhauling, including Furnace STRIKO W1200 SL Pro Dos, Punching Machine REIS and cooling basin.
Cav2l09vja
2
ISLAND PRESSURE DIE CASTING IDRA OL 2000 A
ISLAND IDRA OL 2000 A - RF09
Bwe3vu0w
Brand: Idra
Model: OL 2000 A
Matric: 7442
Year: 2000
Control panel E. Electronic
Lubricator
Loader OMS model CMI30 serial no. 766 year 2014
Picking robot ABB model IRC5 M2004 serial no. 6700-101562 year 2014
Burr cutter Tecnopress model not detected serial no. year not detected.
Burr unloading belt Cristini model not detectable serial no. PR0035 year ant. 1996
Tilting discharge belt brand not rilev. model not rilev....
4
Die casting machine is with very good condition.
Giyfybb
6
Used heating and cooling unit from Regloplas for die casting machines.
This single-circuit device is designes for the temperature control of die casting tools with water.
Circuits: 1
Flow temperature max. 140°C
Voltage 3x 400V / 50Hz
Dpkfgvf
11
HORIZONTAL COLD CHAMBER DIE CASTING MACHINE
manufacturer BÜHLER
type SC D42
year of manufacture 1997
EQUIPMENT
free programmable command BÜHLER
REALTIME injection system
central autom. die height adjustment
core pull units
hydraulic stroke limitation system
1 x automatic tie bar, operator side
automatic safety door operator side
hydraulic ejector
Medium Waterglycol hfc
machine configuration + documentation GB / english
TECHNICAL DETAILS
locking force 420 to
injection force 19,5 - 49 to
ejec...
5
Closing force: 480kN, hydraulic pressure: 70bar, weight: 4t, documentation available, was overhauled in 2009.
B2oniz0o0h
3
General overhauled, as good as new,
Bupkzilvvo
machine with function guarantee, with running condition
4
used electric sprayer Spraymotion 411 E for die casting machines.
The device has been tested by the manufacturer for function
Included support unit and spray- and blowrail (system SR)
Connection 24 pin plug
electric driving unit with 400mm stroke length
H92qfnzuw
10
The machine was until recently under power, with sprayer, with oven and with temperature control unit.
Brbq7nu
3
total power requirement kW
weight of the machine ca. t
required space m
B8xoknnfqb
Used furnace cabinet for die casting machine Frech type DAW 80 - suitable for multi-chamber furnace MELTEC - type 80/180 with individual controls.
Has been checked for functionality by the manufacturer.
closing pressure 600 kN
clamping plate 460x460 mm
distance between columns 300x300 mm
weight of the machine ca. 4,5 t
lock stroke 230 mm
capacity of ejector 40 kN
ejector stroke 70 mm
height of form 120-350 mm
Bmmd2sj9yj
column diameter 56 mm
casting capacity 55 kN
casting plunger stroke 130 m/m
injection plunger diameter 45,50,55 mm
casting volume (DIN 24480) 76,121,165 cm 2
volume cast pressure 345,280,231 kp/cm²
casting area 174,214,260 cm 2
Traverse Stroke 150 m/m
Used Die Casting machin...
5
closing pressure 900 kN
clamping plate 540x540 mm
distance between columns 350x350 mm
weight of the machine ca. 5,5 t
lock stroke 280 mm
capacity of ejector 60 kN
ejector stroke 70 mm
height of form 160-400 mm
column diameter 65 mm
Ba8hll
casting capacity 75 kN
casting plunger stroke 130 mm
injection plunger diameter 50,55,60 mm
casting volume (DIN 24480) 119, 163, 214 cm 2
volume cast pressure 380, 315, 265 kp/cm²
casting area 236, 285, 340 cm 2
Traverse Stroke 150 mm
Used Die Casting machi...
total power requirement kW
weight of the machine ca. t
required space m
Used heating and cooling unit from Robamat for die casting machines.
This single-circuit device is designed for the temperature control of die casting tools with oil.
Checked and repaired by the service partner of the manufacturer.
Two new coolers installed
Circuits: 1
Flow temperature max. 250°C
Qdvp2
Heating capacity 1x 10kW
Cooling capacity 1x 20kW
Voltage 3x 400V / 50Hz
closing pressure 600 kN
clamping plate 460x460 mm
distance between columns 300x300 mm
weight of the machine ca. 4,5 t
lock stroke 230 mm
capacity of ejector 40 kN
ejector stroke 70 mm
height of form 120-350 mm
column diameter 56 mm
casting capacity 55 kN
casting plunger stroke 130 m/m
injection plunger diameter 45,50,55 mm
casting volume (DIN 24480) 76,121,165 cm 2
volume cast pressure 345,280,231 kp/cm²
casting area 174,214,260 cm 2
Traverse Stroke 150 m/m
Bnxsojr
Used Die Casting machine D...
total power requirement kW
B8xolkawme
weight of the machine ca. t
required space m
Used heating and cooling unit from Robamat for die casting machines.
This two-circuit device is designed for the temperature control of die casting tools with water.
Available in accordance. It will be checked, maintained and repaired at service partner of the manufacturer before delivery.
Circuits: 2
Flow temperature max. 160°C
Heating capacity 2x 12kW
Cooling capacity 2x 35kW
Voltage 3x 400V / 50Hz
flow...
total power requirement kW
weight of the machine ca. t
Cgfqm0t8
required space m
Used heating and cooling unit from Robamat for die casting machines.
This two-circuit device is designed for the temperature control of die casting tools with oil.
Circuits: 2
Flow temperature max. 250°C
Heating capacity 2x 20kW
Cooling capacity 2x 40kW
Voltage 3x 400V / 50Hz
pan capacity 420 kg
N0nxkirr
Single-Chamber Meltec Furnace Typ Z20/120C unused as new for DAW20A or DAW20S with stainless steel crucible.
Crucible content 420kg/Zn.
Melting capacity 120kg/Zn/h
Electrical Connection 21,5kW
With control cabinet.
closing pressure 600 kN
clamping plate 460x460 mm
distance between columns 300x300 mm
weight of the machine ca. 4,5 t
lock stroke 230 mm
capacity of ejector 40 kN
ejector stroke 70 mm
height of form 120-350 mm
column diameter 56 mm
casting capacity 55 kN
casting plunger stroke 130 mm
injection plunger diameter 45,50,55 mm
Botogj9m
casting volume (DIN 24480) 76,121,165 cm 2
volume cast pressure 345,280,231 kp/cm²
casting area 174,214,260 cm 2
Traverse Stroke 150 mm
Used Die Casting machine DA...
