Used Copy Lathe for sale (6,254)

Condition: excellent (used), Model: 4M/65E Condition: Very good Cajdpfx Absxz Tfao Toa Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) - Speed regulation on slide. - Works great

Condition: used, Automatic lathe, turning machine with copy attachment UMA Type F1 NK 60 Copy lathe for chuck parts Machine no. 28-0031 Year of manufacture: 1971 Maximum turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in machine spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm, 4 steps Main motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gearbox steps - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying unit SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system mounted below the machine bed - Hydraulic unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement automatic lathe (L x W x H): 2400 x 1900 x 1500 mm Space requirement hydraulic unit (L x W x H): 1400 x 850 x 1700 mm Weight automatic lathe: 2400 kg Weight hydraulic unit: 400 kg Total weight with pallet: 3000 kg Caodpfsib D H Rex Ab Toa In good condition

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3750x1400x1750 mm Weight 1600 kg Total power requirement 8 kw Codpfxev A Huhe Ab Toaa

Condition: good (used), Year of construction: 1972, machine/vehicle number: 4224-06, center height: 240 mm, space requirement width: 1,600 mm, space requirement length: 2,650 mm, space requirement height: 1,200 mm, turning diameter: 200 mm, VDF Gebr. Boehringer 42D (WAG 831) Drawbar Lathe Manufacturer: VDF Gebr. Boehringer Model: 42 D Year of manufacture: 1972 Machine No.: 4224-06 General information / technical specifications: Used drawbar lathe from VDF Gebr. Boehringer Lathe chuck: Forkardt Ø250 mm wedge bars (power chuck) Center length / center width: 1000 mm Turning diameter: 200 mm (over support) Center height: 240 mm Spindle bore: approx. 62 mm Dimensions (h x w x d): 1200 mm x 1600 mm x 2650 mm Accessories: 2x Multifix brackets 2x clamping jaws Caedpfx Abjwfqwds Tea Various turning tools Further information: Multifix Type B installed Including coolant device with tray

Condition: new, machine/vehicle number: 7-CL1200, The new CL 1200 commercial copy lathe from Holzprofi is characterized by its extreme stability and ease of use. 100% Made in EU (developed, built, quality-tested) Standard equipment: Drill chuck ø 16 mm, mandrel MK2 with external taper ø 16 mm, Live center punch ø 20 mm, Live center punch ø 40 mm, Four-prong driver ø 20 mm, Four-prong driver ø 40 mm, bung chuck ø 40 mm, Clamping disk ø 200 mm, copy chisel 16x16 mm, Hand rest, protective screen, clamping lever, ejector, Drill holder (for longitudinal milling of grooves). incl. fixed steady rest Technical data: Center width 1200 mm Center height 215 mm Spindle thread M33 DIN800 Spindle taper MK2 Tailstock taper MK2 Quill travel 140 mm Drill chuck 16 mm Spindle speeds 500/1000/2000/2800 Motor output S6 1.5 kW (1.1 kW S1) Caodpjvw Eaxofx Ab Toa Weight 395 kg Optional accessories: Traveling steady rest Stepless speed control

Condition: used, Year of construction: 1986, used, top condition cleaned, function checked, test run, manufactured by Hapfo type AP 1000 built in 1986 Cjdjvwf D Depfx Ab Toaa mach.-No. 44 top width ca.1000 mm top height ca. 200 mm 6-Zackmitnehmer live centre motor 0.75 PS revs 750 - 1500 - 3000 required space ca. l x w x h mm 1600 x 600 x 1400 located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x1400x16502 mm Cajdpfx Aov A Ht Rsb Tsa Weight 1800 kg Total power requirement 8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2700x1400x1750 mm Weight 1800 kg Total power requirement 5 kw Caodev A Ht Djpfx Ab Tsa

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1230x490x2120 mm Weight 200 kg Total power requirement 1,5 kw Cajdpfovz Hpcex Ab Tja

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1230x490x2120 mm Weight 200 kg Cajdpsvz Hmhjfx Ab Tea Total power requirement 1,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x480x1330 mm Caodpsvz Hi Nsfx Ab Tja Weight 230 kg Total power requirement 1,6 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x480x1330 mm Caedpfx Abevz Eu Re Tja Weight 230 kg Total power requirement 1,6 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x480x1330 mm Cajdpfx Aovz Ep Ijb Toa Weight 220 kg Total power requirement 1,6 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x480x1330 mm Casdpfx Absvz Em Ts Tja Weight 220 kg Total power requirement 1,6 kw

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copy turning attachment, copying device for lathes The copying device comes from a lathe. Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Good condition Caodpfexxmf Iex Ab Tsa The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: excellent (used), CATALOG NUMBER 7650 Technical Data: - Max working length: 1500mm - Max working diameter: 250mm - Milling (disc milling cutter): 7.5kW - Spindle – 2800rpm 3kW - Spindle speed: 700/1200/1500/2000rpm - Grinding unit: 0.75kW - Hydraulic motor: 3kW - Total power: 17.75kW - Air requirement: 6-8bar - Feeder for blanks up to 150x150mm - Extraction port diameter: 100mm, 160mm - Transport dimensions (L/W/H): 4350x2300x1980mm - Weight: approx. 3000kg ADVANTAGES – German-made – Automatic hydraulic copy system Caedswk Hbpopfx Ab Tea – Original DTR documentation – Unpainted – Used lathe, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR based on an exchange rate of 4.2 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: used, SECOND-HAND HORIZONTAL COPYING LATHE WITH 4 SPINDLES BACCI - Spindles distance 180 MM - With cabin Caodjwr Uknjpfx Ab Tja

Condition: used, machine/vehicle number: 19013, Combined copying milling machine - lathe MICHÄL KÄMPF Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Cajdpoh Axryjfx Ab Tja

Year of construction: 1989, condition: excellent (used), Hydraulic copy lathe for wood Automatic cycle turning system with one programmable copier for one or two passes Hydraulic copying unit with touch probe Maximum distance between centers mm 1300 Maximum diameter mm 250 Codpfx Absm Tz Tue Teaa Tailstock sleeve diameter mm 60 Stroke of the tailstock sleeve mm 100 Carriage feed speed mt/min 0/6 Trolley return speed mt/min 7.33 Spindle speed rpm 900/1500/1800/2250/3000/4500

Condition: excellent (used), CATALOG NUMBER 6901 TECHNICAL DATA - max turning length: 1200 mm - max turning diameter: 210 mm - max turning diameter with standard steady rest: 90 mm - max dimension of square material for turning with automatic feed: 100 mm - 3 hydraulic copy attachments Csdpokqui Rofx Ab Teaa - additional 3 tools on hydraulic pistons (2 pieces installed) - 4 spindle speeds - automatic or manual machine operation - spindle motor power: 9 kW - hydraulic pump motor power: 3 kW - extraction nozzle diameter: 90 mm - transport dimensions (L/W/H): 3700x2100x2000 mm - weight: approx. 3000 kg ADVANTAGES – Italian production – automatic hydraulic copy attachment – original technical documentation (DTR) – not repainted – used lathe, in very good condition Net price: 63,900 PLN Net price: 15,200 EUR Net price calculated at the rate 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Csdpexpqm Rsfx Ab Tjaa Front door: partial opening M0 / full opening

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. Cedpfx Aoxdmgveb Teaa 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), functionality: fully functional, Year of construction: 1997, degree of automation: manual, working width: 4,000 mm, distance between stands: 3,145 mm, overall weight: 10,500 kg, total length: 4,180 mm, total width: 1,600 mm, total height: 2,665 mm, LVD PPT165 COPY 4000 mm 165 T Easy to operate. Not CNC. Transport can be arranged. It appears the machine is a copy of LVD. Sold by SH Trading. Caedpfx Ajw Eawyeb Tea

Condition: excellent (used), Broadbent Heavy Duty Lathe 1041mm x 10,000mm Year approx. 1973. Swing over bed 1041mm (41”) Swing bin gap1575mm (62”) Distance between centres 9300mm (30’ 6”) Spindle bore 115m (4 ½”) Spindle speeds (18) 3.3 – 360 rpm Cajdpowhylvsfx Ab Toa Spindle motor 30 HP or 40 HP (To be confirmed) Tailstock 6 MT Imperial & Metric screw-cutting with change gears. 36” Faceplate with 4 adjustable jaws, 54” Faceplate, Taper turning attachment, Power feed to top slide, 2 x 18” 3 point steadies, 24”/28” Steady.

Condition: used, 630x4000 Under power. Codpfx Abecncghe Tjaa