TECHNICAL DETAILS:
Working range: up to 1.000 mm
cutting speed: 3 to 5 m/min
return speed: 10 m/min
internal space: max workpiece diameter 600 mm
outside spaces: area of the clamping plate 600 x 340 mm
dimensions: 1,05 m x 0,9 m x 4,3 m
weight: 1.200 kg
ACCESSORIES
Coolant device
Hbtgxdfnu
Tensile force measuring device
Central lubrication automatic
Spindle protection by spring band spirals
Chip conveyor
Shut-off counter
This auction is conducted in cooperation with a dealer active on Ma...
slot-milling length 300 mm
groove width 34 mm
flute depth mm
cutting speed 6 m/min
return speed 6 mm/min
clamping plate 380 x 300 mm
weight of the machine ca. 285 kg
dimensions of the machine ca. 590 x 1150 mm
Bore-Ø min.:
Benr9ey0lh
- with spezial knifes: 6 mm
- with ram inserts: 20 mm
- with normal bumper: 40 mm
Electromagnetic Brake
with various accesssories (see pictures)
groove width 22 mm
drawing length 1450 mm
working speed 0 - 3,7 m/min
pulling force - max. 10 t
table diameter 350 mm
total power requirement 5 kW
Chhmztmmew
weight of the machine ca. 1 t
dimensions of the machine ca. 2,0 x 0,5 x 1,2 m
groove width 50 mm
drawing length 500 mm
pulling force - max. 20 to.
table: 500 x 400 mm
work speed 1000 mm/min
Drive 4,5 kW
weight of the machine ca. 1500 kg
dimensions of the machine ca. 1800 x 500 x 1600 mm
Electric 380 Volt
Tool cupboard with div. tools 1000 x 800 x 850 mm
Electric 380 Volt
Working platform
Hydraulic vertical keyseating machine mounted on underframe with working
platform. Tool cabinet with lots of accessories.
Dealer with own stock of 1600 m².
Bo7r9w8sna
3 automatic movements
Slide travel 200 mm
Table diameter 460 mm
Number of ram speeds 4
Slide speed 32-50-8-125 strokes/min
Cross travel of the table 420 mm
Longitudinal travel of the table 420 mm
Distance between tool and column 480 mm
Maximum height between table and ram 320 mm
Table rotation 360
Tilting head 0 to 8
Maximum weight allowed on the table 400 Kg
Motor 3 kw
Approximate weight 2200 kg
Cgkxl7zqok
Overall dimensions 1717x1221x1885 mm
Hereby I sell new Dalian pusher machine
Civydyt7n3
the machine is new has not yet been put into operation.
The machine has a digital display Y/X
and has a longitudinal feed
Table diameter 400mm,
stroke 400mm,
central lubrication
parts apperat ,
3jaw chuck,
pulling force - max.:2,5 t
max. ram stroke:1000 mm
max. workpiece diameter:40 mm
Broaching speed:60 m/min.
return speed:20 m/min.
Itu9xxbek
total power requirement:24 kW
weight of the machine ca.:6 t
dimensions of the machine ca.:1,7 x 2,4 x 4,77 m
clamping plate:320 mm
TOS OH-6 Gear shaper machine
Max module: 6 mm
Fw7uhxv
Max. Dia. Of machined gear: 500 mm external dia, 450 mm internal dia.
Max thickness of machined gear: 125 mm
Table dia. : 600 mm
Weight 3600 Kg
Hydraulic indoor broaching machine in
technically good condition
I2sv3uexs
Manufacturer: Arthur Klink
Year of manufacture: 1985 reconditioned
Weight: 2t
Model: RIW 10 x 1200 x 400
Machine No: 04.2187
Tractive force: 10.000kg at 3m/min
clearing speed: hydraulically stepless adjustable from 1m/min to 7m/min
return speed: hydraulically stepless adjustable from 7m/min to 30m/min
maximum stroke: 1200mm
Broaching tool clamping: universal drawing head for flat shanks up to 26mm width
maximum workpiece...
groove width 70 mm
drawing length 600 mm
working speed 0-38 m/min
Fuxvnlrmy
Control Frömag Commander EL 30
total power requirement 22,6 kW
dimensions of the machine ca. 2.5 x 2,6 x 1,7 m
Equipment / Accessories:
- dividing head TA 400 AD
- various cabinets with accessories
- documentation
Broaching needle Broaching tool Shock needle
Manufacturer Karl Klink
- Broaches as good as new
- Different sizes
(e.g. Z = 52, m = 1,7, EW 30°, BKS 1013 IR, tool lengths up to 1150 mm)
- Titanium material coatings
- Original wooden box packing
Different versions and sizes are available.
A visit and test run can be arranged by appointment.
Cwabives
Thank you for your interest.
Errors excepted, subject to prior sale.
General / technical data:
Hydraulic horizontal internal broaching machine in
in good technical condition
Bcqdv0ji
Manufacturer: Karl Klink
Model: RIW 6,3
Machine No: 2751
Year of manufacture: 1978
Weight: 2,3to
tractive force: 6,3t
broaching speed: hydraulically infinitely variable from 1m/min to 7m/min
Return speed: hydraulically stepless adjustable from 7m/min to 25m/min
maximum stroke: 1320mm
maximum workpiece diameter: max. 420mm
table opening: Ø 80mm
dimensions: (w x d x h) approx. 5.700m...
max. ram stroke 350 mm
throat 645 mm
table diameter 620 mm
longitudinal feed of the table 600 mm
cross feed of the table 500 mm
Cf9u0f8lqu
ram adjustment 375 mm
total power requirement 5,5 kW
weight of the machine ca. 4,1 t
dimensions of the machine ca. TBH 2,25 x 1,75 x 2,5 m
pulling force - max. 1 t
max. ram stroke 1000 mm
Gxwss3t
max. workpiece diameter 25 mm
total power requirement kW
weight of the machine ca. 0,9 t
dimensions of the machine ca. 1,9 x 0,7 x 1,6 m
max. ram stroke: 450 mm
throat: mm
table diameter: mm
ram adjustment: 600 mm
no. of ram strokes: 18; 22; 28; 35; 45; 56 Hub/min.
cross feed of the table: 800 mm
longitudinal feed of the table: 1000 mm
table rotation: 360 °
feed: pro Hub: 0,14 ... 1,4 m/min
total power requirement: 7,8 kW
weight of the machine ca.: 6,25 t
Oy8kp
transport dimensions LxWxH: m
dimension machine xH: 2,8 x 1,9 x 3,0 m
other features:
Ram:
-the ram is adjustable in the projection of 900mm
-throat of bed = 700mm
Tool c...
weight max. in kg 1000 kg
connected load frequency 230 V
weight 8,0 kg
Hjrv2rp
dimensions 300 x 300 x 100 mm
Due to the low installation height, the maximum lifting height remains
available.
Control with emergency stop. (required by law)
Suspension with safety hook.
Overload protection with slip clutch.
Built-in limit switch.
Collection bag for chain.
Control console with 1.6 m cable.
Ram stroke - max.: 200 mm
ram stroke - min.: 20 mm
throat: 400 mm
Cigwoag77u
table diameter: 500 mm
Adjustment of the table: longitudinal=500 mm
table adjustment: crosswise=400 mm
Adjustment of the table: 360 °
rapid traverse: 1,8 m/min
feed rate:0,1-1,2 mm
dimension machine approx. LxWxH: 2,3x1,3x2,2 m
total power requirement: 4,0 kW
machine weight approx.: 2,0 t
Space requirement approx.: 2300 x 1270 x 2175 mm
Offered are:
Grooving tools, grooving steel, shaping steel new and used.shaping and drawing tools.
Tools for grooving machine also available separately.
Tool holders and shapers Shaping steel ( Impero HSS ) Grooving steel
Tool holder from Impero Groupe Safety
Christian Gierth GmbH "Gierth-gmbh.de" ( engraving )
Tool holder for tool inserts
Holder for grooving machine
Shaper knife partly for screwing on in material PM 60
Shaper knife holder partly made of quenched and tempered tool steel.
Acces...
weight max. in kg 800/400 kg
stroke 6/12 mm
stroke speed 5/8 m/min
output 1,25 kw
connected load frequency 230 V
weight 21 kg
dimensions 420 x 180 x 280 mm
Ytif3k
Due to the low installation height, the maximum lifting height remains
available.
Control with emergency stop. (required by law)
Suspension with safety hook.
Overload protection with slip clutch.
Built-in limit switch.
Collection bag for chain.
Control console with 1.6 m cable.
groove width 3-100 mm
drawing length 1000 mm
working speed 2-20 m/min
return speed 40000 mm/min
Bkse8i9sah
clamping table 500x770 mm
cutting capacity 4080 kp
weight of the machine ca. 15 t
dimensions of the machine ca. 4,5x2x4 m
with indexing table (Ø 800mm), counter stay and other accessories.
weight max. in kg 300 kg
stroke 3000 mm
stroke speed 2,3 m/min
output 0,2 kw
connected load frequency 230 V
Xryve7hh
weight 8,0 kg
dimensions 290 x 230 x 450 mm
Due to the low installation height, the maximum lifting height remains
available.
Control with emergency stop. (required by law)
Suspension with safety hook.
Overload protection with slip clutch.
Built-in limit switch.
Collection bag for chain.
Control console with 1.6 m cable.
weight max. in kg 500 kg
stroke 3000 mm
stroke speed 2,8 m/min
output 0,5 kw
connected load frequency 230 V
Dleug89ss
weight 18,5 kg
dimensions 290 x 230 x 450 mm
Due to the low installation height, the maximum lifting height remains
available.
Control with emergency stop. (required by law)
Suspension with safety hook.
Overload protection with slip clutch.
Built-in limit switch.
Collection bag for chain.
Control console with 1.6 m cable.
collet holder SK 40
dia. of draw-in collets 4 - 26 mm
number 23 Spannzangen
weight 12 kg
dimensions 300 x 300 x 300 mm
C7omyiz
SK40 collet set 27 pieces
for diameters from 4 - 26mm
in 2 aluminum boxes
see pictures
thread 1 - 10 mm
number 140 Bohrer
weight 2,5 kg
dimensions 350 x 250 x 60 mm
Absolute top quality HSS - 5% cobalt drill.
Consists of the following sizes:
Bogxxnj98v
10 x 1 mm. / 10 x 1.5 mm. / 10 x 2 mm. / 10 x 2.5 mm. / 10 x 3 mm.
10 x 3.5 mm. / 10 x 4 mm. / 10 x 4.5 mm. / 10 x 5 mm. / 10 x 5.5 mm.
6 x 6 mm. / 6 x 6.5 mm. / 6 x 7 mm. / 5 x 7.5 mm. / 5 x 8 mm.
3 x 8.5 mm. / 3 x 9 mm. / 3 x 9.5 mm. / 3 x 10 mm.
Delivery in a steel box.
thread 1 - 13 mm
number 230 Bohrer
weight 7,3 kg
dimensions 500 x 250 x 60 mm
Drilling material HSS, TIN coated
Consisting of the following sizes,
Bogxyj7q0y
10 x 1 mm. / 10 x 1.5 mm. / 10 x 2 mm. / 10 x 2.5 mm. / 10 x 3 mm.
10 x 3.2 mm. / 10 x 3.5 mm. / 10 x 4 mm. / 10 x 4.2 mm. / 10 x 4.5 mm.
10 x 5 mm. / 10 x 5.5 mm. / 10 x 6 mm. / 10 x 6.5 mm. / 10 x 7 mm.
10 x 7.5 mm. / 10 x 8 mm. / 5 x 8.5 mm. / 5 x 9 mm. / 5 x 9.5 mm.
5 x 10 mm. / 5 x 10.5 mm. / 5 x 11 mm. / 5 x 11.5 mm. / 5 x 12 mm.
5...
thread 3 - 20 mm
number 20 Fräser
weight 7,3 kg
dimensions 500 x 250 x 60 mm
diameter mm
Drilling material HSS, TIN coated
Consisting of the following sizes,
10 x 1 mm. / 10 x 1.5 mm. / 10 x 2 mm. / 10 x 2.5 mm. / 10 x 3 mm.
10 x 3.2 mm. / 10 x 3.5 mm. / 10 x 4 mm. / 10 x 4.2 mm. / 10 x 4.5 mm.
10 x 5 mm. / 10 x 5.5 mm. / 10 x 6 mm. / 10 x 6.5 mm. / 10 x 7 mm.
10 x 7.5 mm. / 10 x 8 mm. / 5 x 8.5 mm. / 5 x 9 mm. / 5 x 9.5 mm.
5 x 10 mm. / 5 x 10.5 mm. / 5 x 11 mm. / 5 x 11.5 mm. / 5 x 12 mm.
...
10 valuable tricks for buying used machines online
Sell now on Machineseeker! Over 250,000 inquiries per month
Olympic Games: Machineseeker sponsors Team Germany
Sample sales contract for used machines in nine languages
Morlock Motors official partner of Machineseeker and Truckscout24
Machineseeker still biggest sponsors of 2nd German football league
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.