Used foundry machines for sale (24)

Condition: good (used), Various heavy-duty roller conveyors as casting or cooling lines, ready for immediate use Dkjdpfx Aced Tx Ahe Nei

Condition: excellent (used), 2 pieces shooting head and one shooting head extension for a Roeper H12, very good condition, ready for immediate use Dksdpfx Aced Tx Azs Nei

Condition: excellent (used), 1 piece shooting head, dimensions see photo, very good condition, ready for immediate use Dksdpfxod Tx A Aj Ac Noi

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Reversible element with connection ends Ø 10 x 270 mm Dkodpfx Aed Tx A Esc Nji power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm leg length: 240 mm Number of legs: 3 x 8 pieces Wire quality: CrFeAl Y 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) immediately available from stock

Condition: good (used), Core Sand Mixers, Green Sand MixersVarious sizes and manufacturers, (the photos show only a small part of the selection) immediately available from stock Dksdpfxsd Txz Uj Ac Nsi

Condition: excellent (used), Moulding frames, moulding boxes approx. 270 pieces Dksdpfxed Txz Se Ac Nei very good, immediately ready for use condition lashing on pallets ready for transport

Condition: good (used), Rash rust, unpacker with two vibration motors, good condition, ready for immediate use, wooden supports have to be replaced Dodsd Tx Abopfx Ac Neki

Year of construction: 2020, condition: new, Oxygen and temperature measurement in molten metals Dkedpjgqr A Defx Ac Nei

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,000 h, functionality: fully functional, 1.1 Technical data: 1.1.1 Diameter of work-piece – mm– 1500 1.1.2 Height of work-piece – mm– 2800 1.1.3 Weight of work-piece (max)/ kg 2000 (at that maximum distance between the axes of castings is 1650 mm) 1.1.4 Energy demand 1.1.4.1 Electrical -Turbines – (8 pcs. х 22 kW– кВт) kW– 176 - Bucket elevator – (2 pcs. х 7,5 kW– кВт) kW– 15 - Rotation device of casting – (2 pcs.. х 0,75 kW– кВт) kW 1,5 - Double magnet drum-separator – (2 pcs.–шт. х 1,5 kW) kW 3 - Vibrating conveyor and sieve – (2 pcs. х 4 kW– кВт) kW– 8 - Dust aspiration – kW– 22 - Conveyor path – kW– 7,5 1.1.4.2 Compressed air demand – - pressure – bar 6 - quantity – m3/h 35 1.1.5 Abrasive charge – kg 8000 1.1.6 Projected productivity is 18-25 loads per hour (quantity of loads depends on the duration of cleaning chosen by operator and on chosen regime of work – finishing or rough treatment; thus, producer ensures productivity under performance specification not less than 22 castings per hour while descaling after normalization, annealing, as well as oxides, slag blanket, welded areas while finishing. – 1.2 Units of machine (given for each element separately) – Dsdpfxeymwxps Ac Neki 1.2.1 Machine house - Material of welded house – ST 54, thickness 16 mm - Wear plate material in house – manganese, thickness – 16 mm 1.2.2 Bucket elevator – (2 pcs. per machine) - Load capacity of 1 pc. – m3/h– 40 1.2.3 Shot material cleaner – (2 pcs. per machine) - Aspiration volume of 1 pc. – m3/h 2500 - Capacity of 1 pc. – t/h– 120 1.2.4 Double magnet drum-separator – Diameter mm– 300 1.2.5 Dosing bulk – (2 pcs. per machine) - Volume of 1 pc. – m3 0,7 - Dosing valve pneumatics (different for under and overhead turbines) – 1.2.6 Turbines – Турбины (8 pcs. per machine ) - number piece 8 - type ABR-501 - diameter– диаметр mm– 500 - wheel rotations/min 1/min– 2600 - motor power kW– кВт 22 - abrasive capacity kg/min/each– 350 1.2.7 Conveyor-path - Load capacity per length kg/m– 3000 1.2.8 Movable trolley– (12 pcs.) - Load capacity ton 2 - Distance between the axes of hangers max 1650 mm 1.2.9 Dust aspiration - Air to be aspirated m3h 25000 - Filter tip APSZ 24 - Cartridge surface m2 504 - Fan motor power kW 22 1.2.10 Electrical box - mains voltage V 3 x 400 - control voltage V 24 - frequency Hz 50 1.2.11 Vibrating sieve load capacity – (2 pcs. per machine) t/hour 140

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,000 h, functionality: fully functional, 1.1 Technical data: 1.1.1 Diameter of work-piece – mm– 1500 1.1.2 Height of work-piece – mm– 2800 1.1.3 Weight of work-piece (max)/ kg 2000 (at that maximum distance between the axes of castings is 1650 mm) 1.1.4 Energy demand 1.1.4.1 Electrical -Turbines – (8 pcs. х 22 kW– кВт) kW– 176 - Bucket elevator – (2 pcs. х 7,5 kW– кВт) kW– 15 - Rotation device of casting – (2 pcs.. х 0,75 kW– кВт) kW 1,5 - Double magnet drum-separator – (2 pcs.–шт. х 1,5 kW) kW 3 - Vibrating conveyor and sieve – (2 pcs. х 4 kW– кВт) kW– 8 - Dust aspiration – kW– 22 - Conveyor path – kW– 7,5 1.1.4.2 Compressed air demand – - pressure – bar 6 - quantity – m3/h 35 1.1.5 Abrasive charge – kg 8000 1.1.6 Projected productivity is 18-25 loads per hour (quantity of loads depends on the duration of cleaning chosen by operator and on chosen regime of work – finishing or rough treatment; thus, producer ensures productivity under performance specification not less than 22 castings per hour while descaling after normalization, annealing, as well as oxides, slag blanket, welded areas while finishing. – 1.2 Units of machine (given for each element separately) – 1.2.1 Machine house - Material of welded house – ST 54, thickness 16 mm - Wear plate material in house – manganese, thickness – 16 mm 1.2.2 Bucket elevator – (2 pcs. per machine) - Load capacity of 1 pc. – m3/h– 40 1.2.3 Shot material cleaner – (2 pcs. per machine) - Aspiration volume of 1 pc. – m3/h 2500 - Capacity of 1 pc. – t/h– 120 1.2.4 Double magnet drum-separator – Diameter mm– 300 1.2.5 Dosing bulk – (2 pcs. per machine) - Volume of 1 pc. – m3 0,7 - Dosing valve pneumatics (different for under and overhead turbines) – 1.2.6 Turbines – Турбины (8 pcs. per machine ) - number piece 8 - type ABR-501 - diameter– диаметр mm– 500 - wheel rotations/min 1/min– 2600 - motor power kW– кВт 22 - abrasive capacity kg/min/each– 350 1.2.7 Conveyor-path - Load capacity per length kg/m– 3000 1.2.8 Movable trolley– (12 pcs.) - Load capacity ton 2 - Distance between the axes of hangers max 1650 mm 1.2.9 Dust aspiration - Air to be aspirated m3h 25000 - Filter tip APSZ 24 - Cartridge surface m2 504 - Fan motor power kW 22 1.2.10 Electrical box - mains voltage V 3 x 400 - control voltage V 24 Dkodpfx Acoymww So Nsi - frequency Hz 50 1.2.11 Vibrating sieve load capacity – (2 pcs. per machine) t/hour 140

Year of construction: 2019, condition: excellent (used), load capacity : max 360 kg Extendable : 700 mm x 1400 mm Dsdpfjpu D Dzox Ac Neki Angle of rotation around longitudinal pivot : 360`

Condition: used, functionality: fully functional, Specifications: Dkodpfxowtzpys Ac Nji - (54) 22'' x 8'' x 3'' - 7.5 kg capacity moulds on transfer chain - Propane burner - CSA approved

Condition: new, rotary drum dimensions: length: 6000 mm inside: Ø 1600 mm outside: Ø 2280 mm max. temperature: 1200 ° C Dsdpfjcmxziex Ac Noki heating: gas eating power 2700 kW melting capacity: 6000 kg / h The plant consists mainly of: - furnace - hydraulic power pack and tilting mechanism - heating system - carousel with molds - charge box - measuring and control system

Condition: used, functionality: fully functional, Foundry - Inventory Complete inventory of the sand casting foundry in Venlo-Lomm, Netherlands HWS molding line, type SFM2 / 30 boxes per hour Control system S/7 Hopper mill Core shooter Röper H6.5 - H16, hydraulic – control system S/7 Core sand mixing unit, manufacturer Klein YXLON X-ray system Spectral analysis Spectro Ideco analysis device Molding machines Sand preparation Melting furnaces Belt grinder Hazardous goods container Dkjdpfxovz Aprs Ac Nji Drying oven Band saw Blasting unit Overhead crane 32t / crane rail: 5750 mm / year 2002 You are cordially invited to inspect the foundry. Equipment and items are sold in used condition. The seller excludes any warranties.

Condition: used, Machine type: Horizontal table-type boring machine Manufacturer: CORNAO Model: BS65N S1893 Year of manufacture: 1983 Condition: Used Motor power: 6.5 kW Voltage: 400 V Dkjdpsui H U Nsfx Ac Nsi Required air pressure: 5 bar Weight: 1,900 kg Control system: A.I.F

Condition: used, functionality: fully functional, Foundry factory for sale, Property includes 15 buildings, 6 hectares of land. Located at the Karhula industrial site next to the city of Kotka in southeastern Finland, Karhulan Valimo was founded in the 1880’s. In 1902, the foundry was merged with a wood grindery, glass factory, brick factory and engineering works to form the Karhula Oy. In 1915 the Karhula Factories were sold to Ahlström Corporation. The current Foundry was built in 1960 and in 2000 Ahlström sold the foundry to Sulzer Pumps Finland. In 2016 Sulzer Pumps decided to close the foundry and it was sold to Karhulan Foundry Oy, which was unfortunately declared bankrupt in March 2021. Throughout its history, the Dkjdpfx Aceuxmt Te Nei foundry has been known of been able to produce highly demanding castings particularly in high alloyed steels. In 2022 Karhu Assets Oy bought the facilities and machinery of the foundry. Most of the equipment in the fettling shop has already been sold, while most of the machinery in the moulding department and meltshop are intact and available. All heat treatment furnaces, a total of 10 units, are in place and available for sale. Welcome to visit on the site! The equipment is located in Kotka, 48600, Finland, and is sold EXW Kotka in its current condition. The flight time from most European cities to Helsinki, Finland, is approximately 2 hours, and the drive from Helsinki to Kotka via the motorway is about 120 km (1 hour). You are welcome to visit us in person to inspect the foundry machinery! Second-Hand Condition: All machines, equipment, and articles are sold in a used condition. No Warranty, Exchange, or Guarantee: The seller does not offer any warranties or guarantees on the items sold. There is no option for exchange or refund, so the buyer accepts any risks associated with the purchase. As Inspected On Site: The buyer must inspect the goods on-site before making the purchase, as the sale is final once inspected. The seller will not be held responsible for any defects found after the purchase.

Condition: used, Year of construction: 1975, machine/vehicle number: SN: 75.1019, DISAMATIC 2032 A SN: 75.1019 Date of manufacture: 1975 Dimensions: DISAMATIC 2032 A: 8011 x 1600 x 2950mm (length x width x height) Control room: 2400 x 1900 x 2300mm (length x width x height) Weight: ca 32t (without hydraulic oil) Mold dimensions: Height: 600mm Width: 775mm Thickness: min. 150mm / max. 400mm The thickness of molds depends on chamber depth, molding pressure, molding boards, pressure of sand shooting, molding sand properties. Pressure on molds urface: To be set up between 0 and 22kp/cm² Efficiency: 300 molds per hour (coreless/thickness of mold 200mm) Current fficiency: 150 molds per hour Max. unit weight of casting: approx. 40kg net Molding sand consumption: max. 85m³ per hour Air consumption: max. 14m³ per min. Dkodevyc T Uspfx Ac Nsi Air pressure: min. 6kp/cm² max. 10kp/cm² Electric power system: Power demand: 59.5kW 1) main engine - 37kW 2) servo motor – 7.5kW 3) heating parts – 13kW 4) control system – 2kW Control voltage: 110V AC MOULDING CHAMBER DIMENSIONS Top Plate # 774.8 x 710 x 30mm Side Plate, right # 810 x 710 x 30mm Side Plate, left # 810 x 710 x 30mm bottom plate # hardchromed 1-side 2311 x 774.8 x 8mm PMC SYSTEM -PMC cappingstrips Dimensions: Width: 775mm Length: 18m Weight: ca 8t Air consumption: Average consumption: 0.5m³/min Max. consumption: 2.5m³/min ----- Lack of CSE – "QUICK CORE MASK CHANGE" Lack of QPC – "QUICK PATTERN PLATE CHANGING UNIT" ----- Molding machine DISAMATIC 2032 A is integrated with pouring furnace BBC XCQ 44 with capacity 4.4t s inductive furnace is equipped with heated inductor with max. power 120kW and bottom-pour stopwatch. Molding line is connected with knockout grid. We're ready to sell whole molding line, including extra facilities. Machines are in goods hape, mechanically and electrically efficient.

Condition: used, Year of construction: 2001, Foundry Manipulator CLANSMAN DYNAMICS Year of construction: 2001 Max capacity: 250 KG Dedoxxylzspfx Ac Noki

Condition: used, functionality: fully functional, For production bakelite insulated H7 and H4 lamp sockets. Two complete machines available, one for H7 and one for H4 products. Dkedpfoxvrcaox Ac Nei

Condition: good (used), Year of construction: 1960, functionality: fully functional, type of input current: AC, Melting furnace, 1960 - KF Arc Furnace_AC EAF 8 ton, 4 MW - Nominal capacity 8,0 t, output during production has been 6,0 - 10,0 t Dkodpsvampgofx Ac Nji - Power transformer 4 MW Karhula Foundry has two molding lines and hand molding for large castings. Our melting capacity consists of 8 ton arc furnace and 8 ton, 1,5 ton and 0,5 ton induction furnaces. We have an 8 ton AOD (Argon Oxygen Decarburization) converter for metal treatment.

Condition: used, Year of construction: 2000, Glass melting equipment for making glass insulation for lamp heads. Djdpfexbyz Usx Ac Neki

Year of construction: 2003, condition: good (used), machine/vehicle number: 956-03-13, OFFER 21072 Technical data: - Load capacity positioning table approx. 750 kg - face plate diameter 500 mm - max. workpiece diameter 1600 mm - height of turntable in horizontal position approx. 750 mm - rotary table with clockwise + anticlockwise rotation - axis of rotation turntable endless 360 ° - Turning time per revolution 12,5 sec. - Swivelling left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot switch for turntable + swivel arm - hydr. clamping bolt for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping travel of the clamping bolt 32 mm - Clamping force pushing / pulling 80 / 48,9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manual or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - weight approx. 2500 kg Dkodpfxjgxmabo Ac Nei - Separate control cabinet with high frequency device for - high frequency tools

Condition: used, Continuous Casting Machine Dedpfx Acsxixkws Neki

Condition: like new (used), Year of construction: 2019, functionality: fully functional, A used Rautomead RMT 200 is for sale. Inspection on site is possible. Dkjdpfx Asv Rz Ekec Noi More technical details are available upon request.