Used Combined Drawing Machine for sale (85,538)

Year of construction: 1987, condition: used, pipe diameter (max.): 90 mm, pipe length (max.): 14,000 mm, FEEDSTOCK TUBE .. external diameter max.: 90 mm .. lenght max.: 14000 mm CHARACTERISTICS DRAWING MACHINE .. force: 250 kN .. number of parallel trains / strands max.: 3 For Sale: High-Performance Triple Drawing Bench GKZ 250 / 3-19R – Precision, Power & Reliability Offered for sale is a Triple Drawing Bench, type GKZ 250 / 3-19R, manufactured by Bültmann Maschinenbau GmbH & Co. KG, a renowned German company known for high-quality tube drawing technology. This system stands out for its robust design, impressive pulling force, and flexible adaptability for a wide range of tube dimensions and materials. Technical Data Year of Manufacture: 1987 Manufacturer: Bültmann Maschinenbau GmbH & Co. KG Location: Hall 7 / 8 Floor Space: 6 x 35.5 m = 213 m² Installed Power: 355 kW Operating Personnel: 1 person Podpoxql Eqjfx Adnegw Performance Specifications Number of Tubes per Draw: 1, 2 or 3 Input Tube Outer Diameter: 8 – 90 mm Input Tube Length: 3,000 – 11,000 mm Finished Tube Wall Thickness: 0.5 – 4.0 mm Finished Tube Length: up to 14,000 mm Maximum Drawing Force: 250 kN at 6 m/min 250 kN at 60 m/min 186 kN at 90 m/min Return Speed: 180 m/min Noise Level: < 85 dB without material Equipment & Components Tube storage and magazine Pre-bench with mandrel rods Die stand with exchangeable cassette Drawing bed with drive Drawing carriage with clamping jaw Cross-travel tube receiving table Tube cradles No. 1 and No. 2 Operator platform Hydraulic power unit Mandrel rod magazine Technology & Control Hydraulics: Rexroth Pneumatics: Festo Electrical Control System: Siemens Highlights This triple drawing bench has been well maintained and remains in excellent working condition. Thanks to its modular design and strong performance, it is ideal for companies requiring precise and efficient tube drawing – from single draws to continuous production.

Condition: new, Multipurpose combination machine with aluminum sliding table for sawing, milling, surface and thickness planing, and optional long-hole boring Torsion-resistant steel and cast iron construction Machine table made of cast iron, hardened and ground Smooth-running anodized aluminum sliding table, 10-year SCM warranty on slideway wear Large crosscut frame with extendable aluminum telescopic fence and flip stops Combination saw and mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for consistent timber feed during thickness planing Four spindle speeds, manually selectable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Fitted with the proven million-fold SCM ball contact system Consistently smooth operation due to hardened and ground guides Not susceptible to dust and dirt thanks to minimal contact point between ball and trapezoidal rail The extraction ports for surface and thickness planing are located on the same (right) side, so the same extraction hose can be used for both planing operations. Helical steel infeed rollers for constant and even workpiece feed Massive anti-kickback pawls for operator safety 3-knife cutterblock ensures optimum planing results Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Cutting width at rip fence: 800 mm Pgjdpfxoiiypps Adnow Saw shaft speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Surface table length: 1260 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs Table dimension: 300 x 450 mm Min. / Max. working height: 3 mm / 220 mm Max. stock removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle speed: 3500/6000/8000 rpm Motor power: 3 x 4 kW, 400 V, 50 Hz Extraction port diameter: 4 x 120 mm Saw blade guard extraction port Ø: 60 mm Weight: 430 kg OPTIONS: - Professional fences EUR 300.-- Saw fence with quick lock and micrometric adjustment Surface planer fence 90° ÷ 45° continuously adjustable - Scoring unit incl. blade EUR 292.-- - Handwheel with digital readout for thickness table positioning EUR 129.-- - Mobility kit EUR 119.-- - 2 additional handwheels for unit adjustment EUR 45.-- - TERSA cutterblock, diameter 72 mm EUR 212.-- - Xylent spiral cutterblock with 3 rows of knives EUR 717.-- - Aluminum long-hole boring device EUR 390.-- - 2 flip stops for crosscut fence EUR 150.--

Year of construction: 1977, condition: good (used), 1 used, well-maintained 3-in-1 combined hydraulic folding machine – press brake and guillotine shear FOLDING MACHINE: Pgodpfx Aewyvxisdnsw Working length: 3050 mm Working length between uprights: 3150 mm Sheet thickness (steel, at full length): 3 mm Throat depth: 500 mm Upper beam stroke: 300 mm Upper beam forward speed: 35 mm/s Upper beam return speed: 100 mm/s Max. bending beam working speed: 90°/s Backgauge adjustment travel (electric): 750 mm Number of bending programs: 6 PRESS BRAKE: Max. working pressure: 75 t Working length: 3050 mm Working length between uprights: 3150 mm Throat depth: 120 mm Stroke: 285 mm Forward speed: 35 mm/s Working speed: 10 mm/s Return speed: 100 mm/s Backgauge adjustment travel (electric): 750 mm Number of angle programs: 6 GUILLOTINE SHEAR: Cutting capacity (steel, 45 kg strength): 4 mm Cutting length: 3050 mm Cutting angle: 1° 20′ Strokes per minute (unloaded): 20 Number of hold-downs: 20 Pressure per hold-down: 250 kp Throat depth: 370 mm Backgauge (electric adjustment): 750 mm Net weight: 9100 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund

Condition: used, Year of construction: 2009, cutting height (max.): 102 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, planing width: 310 mm, total length of planing tables: 1,500 mm, total width: 2,120 mm, total length: 2,600 mm, total height: 1,300 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 10,000 rpm, overall weight: 900 kg, chip removal: 5 mm, chip removal for surfacing (max.): 5 mm, number of planer blades: 4, spindle speed (max.): 10,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: scorer, No. 04501 5-fold combined machine Felder CF 531 Used, year of construction 2009, very good condition Circular saw tiltable - table router tiltable - surface planer / thickness planer - preparation for long hole drilling support / long hole drilling device Pedpfx Adexzk Thsnjgw Circular saw Motor power 3 kW Scoring unit Sliding table 2500 mm long Manual saw blade tilting 90° - 45° Saw blade diameter 250 - 315 mm Spindle diameter 30 mm Cutting height max. 102 mm Cutting width approx. 800 mm Outrigger table with telescopic cross-cut fence Pivoting cross-cut fence with degree scale Moulder Motor power 3 kW Moulder table opening diameter 180 mm Maximum cutter diameter 300 mm Spindle diameter 30 mm Manual spindle swivel 90° - 45° Speed 3000 / 6000 / 8000 / 10000 rpm Planer Motor power 3 kW 4-knife planer shaft Planer Table length 1500 mm Planer Table width 310 mm Chip removal max. 5 mm Parallel fence pivotable 0° - 45° Thicknesser Table length 540 mm Thicknesser width 306 mm Thicknesser height 4 - 220 mm Switchable feed rate 6 m/min Preparation for long hole drilling support / long hole drilling device Machine CE-compliant, GS-tested Technical documentation available as .pdf file Transport dimensions approx. 2600 x 2120 x 1300 mm LWH Weight approx. 900 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2025, Surface planer minimax fs 41es TERSA Maximum equipment for the professional. Part number 5503431 Pedpfx Adelht Htenegw Brand Holzkraft / SCM Diagonally toothed steel feed roller for constant and even material feed, resulting in chip removal from as little as 0.2 mm (with min. workpiece thickness of 3 mm) - ideal for economical planing of precious woods Models with TERSA cutterblock for changing planing knives in seconds and particularly quiet running Material feed with two speeds Particularly long dressing tables allow easy and precise dressing of workpieces Work tables made of gray cast iron, annealed and stress-free, thus insensitive and permanently flat Dressing tables opening to the rear simultaneously for short set-up times Planer thickness table adjustment via handwheel with numerical display for planer height Cgiptddi High machine weight for maximum precision and smooth running Powerful industrial motor Robust steel/cast iron construction Quality - Made in Italy TECHNICAL DATA Dimensions and weights Length (product) approx. 2200mm Weight (net) approx. 450kg width/depth (product) approx. 1160mm Dressing table Total length of tables 2200mm Dressing fence length 1200mm Working height 905mm Dressing fence height 150mm chip removal max. dressing 5mm Connection suction Suction port diameter thickness 1 x 120mm Thickness thickness table length 775mm working height thickness max. 240mm Thickness table width 410mm Chip removal max. thickness 5mm Working height thickness min. 3mm Electrical data Power drive motor 5kW Mains frequency 50Hz Supply voltage 400V Planer cutterhead Planing shaft type TERSA Planing shaft speed 5000min¯¹ Planing shaft diameter 95mm Planing width max. 410mm Number of planing knives 4pcs Feed rate feed speed 6 / 12m/min SCOPE OF DELIVERY Planer jointing fence with round bar guide & auxiliary fence Two feed speeds Tersa planer shaft Location: Ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1996, For sale is a used Mini Max ST3W panel saw-spindle moulder with a cutting length of 2100 mm. The machine is in good condition and has been inspected and serviced by our qualified personnel. Pgsdpoxxkrxsfx Adnow Technical specifications: - Cutting length: 2100 mm - Cutting width: 950 mm - Cutting height: 95 mm - 4 spindle speeds - Direction of rotation switch - Height-adjustable and tiltable - Circular saw with dust extraction Ø 120 mm - Twin motor, each 3 kW - Year of manufacture: 1996 The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: panel saw, moulder, spindle moulder, circular saw-moulder, combination machine, combi machine Reference: R-K0ACV

Condition: excellent (used), Saw-milling-jointing-thicknesser-Technical data: Jointing planer: -Max. working width 400 mm -Swivelling joint stop 90C-45C Pjdpevk Sqdofx Adnsgw tersa planing knife Thicknesser: -Max. working width 400 mm Passage height 230 mm Circular saw: -Max. Cutting length 3000 mm -Max. Scoring unit Stable boom with angle-adjustable telescopic ruler extendable up to 285 mm with 2 folding stops-Sliding table with prism guide, milling machine: -Spindle diameter 30 mm -Milling stop with stop ruler You can call or write to us. We can speak and write German and Russian. You can also send messages in English.

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw, spindle moulder, combination machine, table saw, circular saw, carpenter’s saw, panel dividing saw, table router, tilting spindle moulder FELDER Model: KFS37 FL Year: 1993 Podpfx Ajxycy Rjdnsgw Sliding table length: 245 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment, up to approx. 75 cm Outrigger table with extendable crosscut fence Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the tilting spindle Manual tilting of the moulder spindle up to 45° to the rear Spindle diameter: 30 mm 3 spindle speeds, adjustable via belt Spindle can be lowered below table level and removed Spindle moulder motor power: 3 kW Cutter fence with fine adjustment and parallel guidance—Felder multi-adjustment system Fold-away support for power feeder Eccentric workpiece clamp Prior inspection is expressly recommended; please leave your telephone number by email and I will contact you to arrange a viewing appointment. Subject to prior sale. All information provided without guarantee. Machines can be collected in person or shipped by freight at the buyer’s expense. Loading and packaging can be organised by us. The quoted shipping costs are indicative; actual costs may vary depending on location and unloading facilities, please enquire. The item is offered under differential taxation. The displayed sales price is the gross final price. An invoice showing VAT separately will not be issued. Basis of warranty: Due to age and wear, sale is exclusively to commercial buyers with no warranty, guarantee, or return the claim. All information is without guarantee. By placing a bid, the buyer acknowledges this. For used items, warranty is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, all warranties are excluded. For new items, warranty is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Year of construction: 2002, condition: ready for operation (used), Offered is a thermoform vacuum packaging machine / deep-drawing packaging machine from CFS. Air: 8bar / 500Nl/min, water: 2bar / 75l/min, weight approx. 2800kg. Inspection by arrangement possible. Pgjdoxx Ud Eepfx Adnow

Year of construction: 1994, condition: used, Technical details: plate thickness: 1,0 mm tube diameter: 60 / 80 / 90 / 100 / 110 / 120 / 130 mm wall strength: 0,6 / 0,7 / 1,0 mm Pgedpfou Icv Asx Adnjw tube pipe draw up length: 150 - 1000 mm control for program: SPS Simatic S 5 air pressure - required: 5 bar voltage: 380 V control voltage: 24 V total power requirement: 3,5 kW dimensions L x W x H: 1,2 x 1,0 x 1,6 m Pipe drawing-in machine, currently equipped for Ø 130mm. - e.g. for furnace pipes -insertion and removal of the workpieces manually -operation via control panel further features: Sheet thicknesses: 0.6 / 0.7 / 1.0mm workpiece length 150 - 1000mm div. Zubehör/Werkzeuge Ø 120 und Ø 130 und weiteres, wie im Foto *

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable Pgjdpfx Adsnabqzonow - Adjustable tables - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)

Condition: excellent (used), Year of construction: 2017, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 2100mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. Technical data: - Cutting length: 2000mm - Cutting width: 650mm - Cutting height: 103mm - 4 spindle speeds - Direction selector switch - Hammer system planer cutterblock - Planing length: 1400mm - 3 motors, each 3 kW - Year of manufacture: 2017 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-L08SV Pgodpfx Aoxxi Irsdnew

Condition: used, Year of construction: 2014, Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Max. plate size: 1500x1600mm min. plate size to be precessed: 500 x 500mm max. plate thickness: 10mm min. plate thickness: 4,0mm max. plate weight: approx. 24kg (bei 1600x1500x10 mm) processing height: approx. 700mm max. capacity: 1.100 to 1.170 kg/h Pgsdpfxoxpxfbo Adnow Comprising: Breyer Extrusion Line composed of - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (7x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tempering units for tooling Condition: Good

Condition: used, No. 04493 Combined machine Steko 228 P.B.S. Pressing - Sanding - Sawing Used - Pneumatic veneer press with electric heating Aluminium heating plates 2280 x 1000 mm LW Lower plate extendable Opening width approx. 145 mm Total pressing pressure 40 tons, specific pressing pressure max. 2 kg/cm2 Heating 2x 1,8 kW - Long belt sander 3 kW Table 2600 x 750 mm LW, extendable Sanding height 200 mm Belt length 6800 mm Belt width 120 - 150 mm Left/right rotation, speed 19 m/s - Sliding table saw / veneer saw / edging saw 2.2 kW With pneumatic pressure beam Cutting length approx. 2600 mm, cutting height adjustable 0 - 60 mm Saw blade diameter max. 250 mm With chain feed - Extraction for sander and saw 0.55 kW Delivery rate approx. 11 m3/min Push-button control with main and emergency stop switches Machine on trolley Installation footprint according to manufacturer 7.5 m2 Transport dimensions approx. 3900 x 2100 x 1400 mm LWH Weight approx. 2500 kg Pgedpsxl Ha Sjfx Adnsw To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 1996, condition: ready for operation (used), A large-format vacuum thermoforming machine Geiss is available. Heating capacity: 180kW, forming area X/Y: 1600mm/1000mm, drawing depth: 620mm, quick-clamping system: 640mm, window plate adjustment: 250mm-750mm, drilling grid: 50mm, closing force: 50kN. Documentation available. An on-site inspection is possible. Expected to be available from February 2026. Pgsdpfoxwyvkex Adnew

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Scope of delivery: Technical Data: Dimensions and Weights: - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: Podpoxnqyhefx Adnegw - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: like new (used), functionality: fully functional, Witech brushing machine (for wire) 4 pcs Year of production: 2015 The brush descaling/cleaning unit is designed for all wire qualities (low-high carbon) wire rod with diameter 5.5–8mm and wire speed up to max 4m/s Pjdpfxowu Da Rj Adnegw Used for a very short time (1 year). Very good condition Price: 18,000 euro/piece

Condition: excellent (used), Year of construction: 2020, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 1300mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. Technical data: - Cutting length: 1300mm - Cutting width: 650mm Psdpfx Adsxxi Dtenegw - Cutting height: 103mm - 4 milling speeds - Directional switch - Silentpower spiral cutter block - Planing length: 1400mm - 3 motors, each 3kW - Year of manufacture: 2020 The machine is located in A-5431 Kuchl and can be inspected by appointment during our business hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Reference: R-L0B8S

Condition: used, Year of construction: 2017, Cannon/Breyer Combined extrusion thermoforming line for producing of continous 6-layer PE plate to thermoform automotive tanks Max. plate size: 1500x1600mm min. plate size to be precessed: 500 x 500mm max. plate thickness: 10mm min. plate thickness: 4,0mm max. plate weight: approx. 24kg (bei 1600x1500x10 mm) processing height: approx. 700mm max. capacity: 1.100 to 1.170 kg/h Comprising: Breyer Extrusion Line composed of - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind Pjdpfx Aoxpxc Tsdnegw - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (8x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Vacuum supply Tempering units for tooling Condition: Good

Condition: like new (used), Year of construction: 2022, functionality: fully functional, ITALMEC TBNS/9 Wet Drawing Line 2022 - 25 m/s, Copper Bath, Near-New, Slippage-Free Description: ITALMEC TBNS/9 WET DRAWING LINE - High-performance wire drawing machine for copper and alloy. This premium unit is offered as part of a two-line package sale. Year of Manufacture: 2022. Commissioned: 2023. Condition: Near-New (Only 20 tons of test operation completed). Detailed Technical Specifications: ● Machine Type: Multiple Wire Drawing Machine (Wet). ● Technology: New Generation Slippage-Free (Independent motor on each capstan). ● Max. Operating Speed: Up to 25 meters/second (m/s). ● Max. Inlet Wire Diameter: 3.5 mm (specific to wet drawing). ● Drawing Process: Designed for high cross-sectional reduction. ● Control System: AC Siemens Electrical Cabinet and integrated drives. ● Unique Feature: Factory-integrated COOPER BATH (Miedziująca Wanna) included. Commercial & Logistics Information: ● Original Purchase Value (This Unit): 160 000 EUR. Psdpfx Aexm Tq Hjdnogw ● Ancillaries: Complete Line Wiring (approx. 50 000 PLN value) is included in the package price. ● Current Status: Professionally Disassembled and secured, ready for immediate loading (EXW). ● Price: This line is sold as part of a two-line package (TBNS/9 + TBNS/9 Standard). Total package price: 259 000 EUR EXW. Inquiries for a single machine purchase are welcome. This is a rare chance to acquire a 2022-technology wire drawing machine with minimal hours, guaranteeing cutting-edge performance.

Condition: new, Year of construction: 2024, planing width: 300 mm, planer shaft diameter: 70 mm, rotational speed (max.): 5,700 rpm, table length: 1,500 mm, table width: 300 mm, number of planer blades: 3, spindle speed (min.): 5,700 rpm, Kombinirka sa 3 operacije abrihter ,diht sa busilicom sirina 300mm sa 3 noza , motor 2,2 kw Podpfxst Etrho Adnjgw

Condition: new, Ideal for demanding craftsmen and carpentersThe particularly long dressing tables made of one piece enable easy dressing of the workpiecesWork tables are made of gray cast iron, making them robust and permanently flatRear-opening dressing tables with tension spring support for quick and easy retoolingThanks to the fixed extraction hood, it is not necessary to reposition the extraction hose during retooling, This saves valuable working timeHelically toothed steel infeed roller ensures constant and even wood infeedRubber outfeed roller in the thickness run-out ensures even wood outfeedMaterial feed with four speedsPlane thicknessing table adjustment via handwheel with integrated display for the planing heightDIGITAL: with electric thicknessing table height adjustment and digital displayOn/off switch in operator positionPowerful industrial motorThe high machine weight ensures maximum precision and smooth paration for slot drilling deviceQuality Made in ItalyTECHNICAL DATADimensions and weightsLength (product) approx. 2250 mm Width/depth (product) approx. 1370 mmWeight (net) approx. 695 kgJointerTotal length of tables 2250 mmChip removal max. Dressing 5 mmDressing fence length 1200 mmDressing fence height 150 mmSuction connectionSuction nozzle diameter thickness 1 x 120 mmInstallation informationSpace requirement length 2250 mmSpace requirement width/depth 1440 mmExplanation of space requirement: The dimensions take into account maximum travel distances or effective cknessThicknessing table length 520 mmThicknessing table width 850 mmWorking height thickness min. 3 mmWorking height thickness max. 240 mmWorking length thickness min. 220 mmChip removal max. thickness 5 mmElectrical dataDrive motor power 7 kWSupply voltage 400 VMains frequency 50 HzPlaner cutterheadPlaner shaft type TERSAPlaner shaft diameter 120 mmNumber of planer knives 4 pcsPlaner shaft speed 5000 min¯¹Planer width max. 520 mmFeedFeed speed 5/8/12/18 m/minSCOPE OF DELIVERYJointer-jointer fence with round bar guide4 feed speedsTersa planer shaftManufacturer no.5503501 Pgedsvwflbjpfx Adnow

Condition: like new (used), Year of construction: 2024, Machine Technical Data: Carriage length: 2500 mm X-Roll carriage guide system Saw adjustable from 0–45° Saw lifting and lowering Digital measurement display on right side Cutting width right: 850 mm Spindle diameter: 30 mm Spindle tilt: 0–45° adjustable Spindle height adjustable Left-right rotation Spindle speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Spindle covers Main saw motor: 5.5 kW Milling motor: 5.5 kW Pjdpfx Adowi Uftenjgw European CE Certificate

Condition: excellent (used), Year of construction: 2022, For sale is a used Hammer circular saw-milling machine B3Winner with a cutting length of 1300 mm. The machine is in very good condition and has been reconditioned and inspected by our professional staff. Technical specifications: - Cutting length: 1300 mm - Cutting width: 800 mm - Cutting height: 103 mm - 4 milling speeds - Direction of rotation switch - Suction connection Ø 120 mm - Height-adjustable and tiltable - 2 motors, each 3 kW - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Pgedpfx Adsxdxgzsnjw Related terms: circular saw, milling machine, router, combination machine, combi machine Reference: R-Y03O4

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 1150 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. Technical data: - Cutting length: 1250 mm - Cutting width: 900 mm - Cutting height: 103 mm Pgedpexdknwsfx Adnew - 4 spindle speeds - Directional switch - 3-knife cutter block - Planing length: 1400 mm - 3 motors, each 3 kW - Year of manufacture: 2020 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thickness planer, thicknessing machine, circular saw Reference: R-B18YQ