Condition: used, Year of construction: 2010, Functionality: unexamined, machine/vehicle number: SN:10090150, IPG and Trump laser systems are for sale. 1x IPG YLS-3000 laser welding system, used, year of manufacture 2010 / in use until approximately 2019, €7,880 net. 3x Trump laser TruDisk 4001 22 kW, year of manufacture 2013-2016 / in use until 2019-2022, €5,500 net each. Felik Sov Evxbj A Ejgb 3x Trump laser TruDisk 4006 22 kW, year of manufacture 2013-2016 / in use until 2019-2022, €5,500 net each. In use until recently, was dismantled due to a production/product change. No maintenance records or similar. Can be tested on-site (where possible). (Graz - Austria) No guarantee/warranty or similar. Shipping and pickup available.

Condition: new, Year of construction: 2024, Kyori High Speed Press VX50-1100 with variable stroke adjustment Technical specification: tonnage: 500 KN drive: flywheel with dynamic balancer feeding direction: right to left colour: Kyori white RAL 7035 position of main drive: right ram adjustment range: 55 mm shut height max.: 290 mm max. upper die weight: 300 kg (higher upper die weight is possible with reduced performance) safety doors: front and back tool load area light: 2 LED lights Bolster area (LxW): 1100 (1140) x 600 mm Bolster design: T-slot Bolster material: steel Bolster thickness: 220 mm base plate opening (LxW): 00 x 160 mm ram area (LxW): 1100 x 420 mm ram design: T slot dimensions: 2300 x 1600 mm total height: 3750 mm weight: (approx.) 14,000 kg strip inlet height: has to be defined strip inlet width: max. 280 mm cooling system: liquid cooling system, for electrical cabinet;AC servo main drive and machine oil Press control with the following features: - 15" touch screen with stand. - User-friendly visualized menu navigation - Data import/export - Energy safe / night shutdown - Three-level energy options - User administration - Error log - High resolution coding system - Tool changeover including stored process parameters - TDC shutdown with brake angle calculation over entire speed range - Oil and air pressure display including monitoring - Integration of the press into a process chain via peripheral interfaces -Ethernet interface - USB interface - Backup function - Test stroke - Reverse run Fslikotndfrj S A Ejgb - Increased working capacity, i.e. reduction of speed to 80 strokes/min. - Quick lift including automatic approach to quick lift position and the shut height in set-up and continuous mode - Stroke change menu driven - Detection of the working stroke after stroke change with SET/ACTUAL comparison - UPS - for fail-safe operation - Absolute ram position display - Punching area protection with non-contact safety switches - Beckhoff "Twincat 3.1" control system - Beckhoff "TwinSafe" safety controller - water-cooled, for cooling the control cabinet and AC servo main drive * for stable production with fluctuating environmental influences such as heat * minimal heat dissipation inside the sound enclosure due to main drive * no suction and swirling of punching oils and particles through main drive - all electrical cables, connectors, control elements, are professionally installed - Remote support Team Viewer - Internet access through integrated Ethernet interface - Interlinked EMERGENCY STOP function - Extension of the press control for further SYS products on request - Integrated service counters for programmable maintenance intervals and maintenance instructions - 8 customer-specific error messages - 2 peripheral interfaces including power supply *Harting Interface 16A *Harting Interface 32 A - SCHUKO socket outlet 230V 10A

Condition: ready for operation (used), Year of construction: 2006, Available immediately from location: CNC lathe Doosan Fgolikswhkzno S A Esb Type Lynx 220 A Year of manufacture 2006 Maximum turning diameter 290 mm Turning length 332 mm X-axis 145 mm Z-axis 332 mm Spindle bore 45 mm Spindle speeds up to 6000 rpm Spindle drive 15 kW 24-station tool turret Fanuc CNC control Chip conveyor Weight 3 tons Price: €9,500 plus VAT, ex location

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Fgjlik Ssrfx Tns A Ejb Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: excellent (used), Year of construction: 2014, operating hours: 11,065 h, Functionality: fully functional, machine/vehicle number: 03001212-03.14, The ALPHA LASER ALM 200 laser welding machine was manufactured in 2014 in Germany by Alpha Laser GmbH, but has been in use since 2017. The mobile laser welder is equipped with a 200W laser source (9kW laser beam power), which allows repairing and modifying a wide variety of components of stamping dies, dies, injection molds, tools and machine parts at any desired location. Welding is carried out in semi-automatic mode. The mobile laser welding system has a narrow laser head that allows access to the inside of the component to be welded. Controlled by computer, joystick and foot switch. The machine is in very good technical as well as visual condition. Regularly serviced. Machine including table. Price: 295,000 PLN net (I issue VAT invoice). Technical parameters of laser welding machine ALPHA LASER ALM 200 - power : 200 W - wavelength : 1064 nm - movement speed (X, Y, Z) : 0-25 mm/s - range of motion (X, Y, Z) : 140 x 120 x 1300 mm - pulse energy : 90 J - pulse duration : 0.5-20 ms - pulse frequency : 100 Hz - laser beam power : 9 kW - laser beam diameter : 0.2-2.0 mm - operation mode : pulsed - focal length : 150 mm - power consumption : 380 V / 50-60 Hz / 16 A/8kW - external dimensions : W-1410 x D-730 x H-1585 mm - machine weight : approx. 320 kg - number of hours worked: 11065 - serial no. : 03001212-03.14 Folotqtrfeik S A Ejgb Additional parameters and instrumentation of the laser ALPHA LASER ALM 200 - optics : LEICA microscope mount magnification 10x, optional 16x -display with keyboard - multifunctional foot switch - joystick - adjustable laser arm - complete stand with table - possibility to buy at a good price interchangeable parts for the machine and accessories, e.g. lamps, hoses, wire guide holders, ball/base for workpieces, magnets, etc. - possibility to buy various types of welding wires at good prices - possibility to buy a fume extraction system Also for sale the same machine with 300 W of 2018 !!!

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts Fgsliewgaqpjk S A Ejb incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 1102-085, spindle bore: 95 mm, turning diameter over bed slide: 930 mm, turning length: 12,000 mm, total length: 13,400 mm, total width: 2,100 mm, total height: 2,100 mm, bed width: 585 mm, overall weight: 18,000 kg, URGENT TO SELL ! Accurite digital read out system 2 axis 2x Steady rest 50 - 300 mm Fjlik S Aewhkuhs Eogb 2x Steady rest 200 - 500 mm Feeds all directions 4 chuck 800 mm

Condition: new, Year of construction: 2024, Functionality: fully functional, Kyori High Speed Press VX50-1500 Fgeljwhk Dpjik S A Ejb with variable stroke adjustment Tonnage: 500 kN Drive design: flywheel with dynamic balancing Strip running direction: possible on both sides Main drive position: right Ram adjustment range: 55 mm Shut height standard: 300 mm Max. upper die weight: 300 kg Safety doors: front and back Work area lighting: 2 LED lights Bolster (LxW): 1500 x 600 mm Bolster thickness: 210 mm Bolster plate: T-slot pitch Bolster material: steel Press bed opening (LxW): 1200 x 160 mm Bridge in machine bed: No Ram size (LxW): 1400 x 420 mm Machining ram: 90 slot pitch Dimensions: 2311 x1835 mm Total height: 3780mm Press weight: (approx.) 14,500 kg Strip inlet height: 100 - 140 mm Strip inlet width: max. 280 mm Possible feeds: PV30-200 Cooling: water cooled, for cooling of control cabinet; AC servo main drive; as well as machine oil; connection to existing hall cooling system Press control with the following features: - 15" touch screen with stand. - User-friendly visualized menu navigation - Data import/export - Energy safe / night shutdown - Three-level energy options - User administration - Error log - High resolution coding system - Tool changeover including stored process parameters - TDC shutdown with brake angle calculation over entire speed range - Oil and air pressure display including monitoring - Integration of the press into a process chain via peripheral interfaces -Ethernet interface - USB interface - Backup function - Test stroke - Reverse run - Increased working capacity, i.e. reduction of speed to 80 strokes/min. - Quick lift including automatic approach to quick lift position and the shut height in set-up and continuous mode - Stroke change menu driven - Detection of the working stroke after stroke change with SET/ACTUAL comparison - UPS - for fail-safe operation - Absolute ram position display - Punching area protection with non-contact safety switches - Beckhoff "Twincat 3.1" control system - Beckhoff "TwinSafe" safety controller - water-cooled, for cooling the control cabinet and AC servo main drive * for stable production with fluctuating environmental influences such as heat * minimal heat dissipation inside the sound enclosure due to main drive * no suction and swirling of punching oils and particles through main drive - all electrical cables, connectors, control elements, are professionally installed - Remote support Team Viewer - Internet access through integrated Ethernet interface - Interlinked EMERGENCY STOP function - Extension of the press control for further SYS products on request - Integrated service counters for programmable maintenance intervals and maintenance instructions - 8 customer-specific error messages - 2 peripheral interfaces including power supply *Harting Interface 16A *Harting Interface 32 A - SCHUKO socket outlet 230V 10A

Condition: ready for operation (used), Year of construction: 2000, Available immediately from our location: FAMUP CNC Vertical Machining Center Type MC 70 E Year of manufacture 2000 Fanuc 18 iM Fgslik S Aswhky Ro Ejb Table 900 x 520 mm Table load 400 kg SK 40 24-station magazine, spindle speeds up to 10,000 rpm Spindle power 18.5 kW Chip conveyor Weight 5 tons Price: €7,000 plus VAT.

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Fgjlionr Nl Ssk S A Eob Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard

Condition: excellent (used), Schlebach Mini Prof Plus Profiling Machine Fgolik Sswhkubo A Ejb Available immediately! The machine is equipped with: -Hand roller shears RS for cross-cutting -Roller shears LS for longitudinal cutting before profiling -Electromechanical length measurement -230V connection The price is €17,365.00 net, plus VAT, equal to €20,664.40 gross. You will receive an invoice with VAT shown.

Condition: good (used), Functionality: fully functional, Welding line with logistics (URBAN, 2008 / SOENEN, 2018) URBAN welding line €30,000 SOENEN welding line with logistics €65,000 Fslikov Enw Ns S A Esgb

Condition: new, Year of construction: 2025, VERTICAL SHUTTLE TABLE MACHINING CENTER S3030 Shuttle table included Equipped with a swivel table, loading and unloading of workpieces on the S3030 takes place in parallel during machining. This significantly increases the productivity of the machine. The swiveling time is only 3.0 sec. Internal cooling of the tools and spindle speed up to 15,000 or 24,000 rpm as well as automatic workpiece loading are optionally available. Traverse paths: Feliohpqtzjk S A Eogb X 300mm Y 250mm Z 250mm Working area: 2x 400x250mm (2x 100kg) BT30 tooling system 15'000 rpm spindle Internal coolant supply with 20 bar Working area enclosure with exhaust Mitsubishi control M80 Weight 3500 kg The machine can be visited live in our company. We have a large program of CNC machines.

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN Fgjljwgan Ueik S A Eeb 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: ready for operation (used), Year of construction: 2002, Available immediately from location: Fully automatic Behringer band saw Type HBM 370 A Year of manufacture 2002 Cutting capacity: round 370 mm Rectangular 370 x 280 mm Smallest diameter: 25 mm, square 25 x 25 mm Smallest cutting length: 10 mm Fgjljwhkydsik S A Ejb Largest cutting length: 1000 mm Cutting speed: 15 – 150 mm/min Drive: 7.5 kW Chip conveyor Central lubrication system Weight: 4 tons Price: €5,500 plus VAT, ex location

Year of construction: 2004, Condition: excellent (used), Year: 2004 X axis:50″ Y axis:26″ Z axis:25″ Motor Power:40 hp Spindle speed Rpm:7500 RPM Atc: 24 Spindle Taper: CT 40 Table width: 23″ Table length: 52″ Felik Ssh Uqkys A Esgb Swarf auger Coolant tank 4th axis

Condition: used, Year of construction: 2001, Nossebro 3-Roll Bending Machine Capacity 1020x6.0mm Year of Manufacture 2001 Fjlswhkqisik S A Ejgb Motorized forward/reverse with brake motor Manual feed Conical bending Swivel-out upper bearing Roll diameter 110mm Emergency stop via pull-cord switch 380 Volts Weight 480kg --The bearing and support (photo) are worn out and must be replaced!

Condition: excellent (used), Year of construction: 2007, CNC Vertical Machining Center BROTHER TC-32 BM QT 2007 5-Axis Fgoliswgaixsk S A Esb Technical Specifications: Travels X-axis: 550 mm Y-axis: 400 mm Z-axis: 415 mm Worktable: 550 x 400 mm Table load: 200 kg Max. spindle speed: 12,000 RPM 2 pallets 0/180°

Condition: new, Year of construction: 2025, VERTICAL SWITCHING TABLE MACHINING CENTER S6040 Feliei Hcplek S A Eegb Switching table included Equipped with a swiveling table, the S6040 allows workpiece loading and unloading to take place during machining. This significantly increases the machine's productivity. The swiveling time is only 3.0 seconds. Internal tool cooling and spindle speeds up to 15,000 or 24,000 rpm, as well as automatic workpiece loading, are available as options. Travels: X 600mm Y 400mm Z 500mm Working area: 2x 700x400mm (2x 250kg) ISO 40 tool system 15,000 rpm spindle Internal coolant supply at 20 bar Working area enclosure with extraction Control: Mitsubishi M80 (Siemens 828D) optional Weight: 6,600 kg The machine can be viewed live at our facility. We have a wide range of CNC machines.

Condition: used, Technical details: table diameter: 1000 mm table height: 300 mm rotation movement: 360 Grad table - tiltable: ja Grad Fjlewf Iuyjik S A Eogb

Condition: ready for operation (used), Year of construction: 1993, Available immediately from location: Kunkel Hydraulic Straightening and Bending Machine Type ECO 30 Built in 1993 (New price: €20,000) Pressure capacity: 30 tons Pressure tool stroke: 250 mm Fgolik S Aewhkx Ho Eeb Drive: 4 kW Speed: 0.5 m/min Tool height: 200 mm Multiple tools Weight: 800 kg Price: €5,500 plus VAT, ex location

Condition: excellent (used), New 2006 Fjliksrfxr Ue S A Esgb Brother CNC-B00 Control Pallet Change time 3.4 seconds Pallet Size 600 x 425mm X axis 550mm Y axis 400mm Z axis 415mm Spindle speed 12000rpm 40 Station ATC BT30

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, turning diameter over cross slide: 300 mm, turning length: 450 mm, turning diameter: 300 mm, spindle bore: 51 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 32 mm, travel distance Z-axis: 450 mm, spindle motor power: 20 W, rapid traverse X-axis: 60 m/min, rapid traverse Z-axis: 45 m/min, bar diameter: 51 mm, CNC Fanuc 16i WORKING AREA: Max rotation diameter: mm 500 Rotation diameter above transverse guide: mm 300 Transverse travel (X): mm 160 Fjliswhkm Rok S A Eogb Y-axis travel: mm +-32 Longitudinal travel (Z): mm 450 MAIN SPINDLE (integrated electrospindle): Spindle head (flat flange): 140 H5 Bar capacity: mm 51 Front bearing diameter: mm 100 Power (40/100% ED): kW 20/16 Torque (40/100% ED): Nm 200/155 Rotation speed: rpm 20-6,000 COUNTER SPINDLE (integrated electrospindle): Spindle head (flat flange): 140 H5 Spindle bore: mm 37 Front bearing diameter: mm 75 Power (40/100% ED): kW 9/7.5 Torque (40/100% ED): Nm 57/48 Rotation speed: rpm 20-6,000 FEEDS: Z-axis rapid: m/min 45 X-axis rapid: m/min 60 TOOL TURRET: Number of motorized tool stations: 12 Power (40/100% ED): kW 10 Torque (40/100% ED): Nm 20 Rotation speed: rpm 5.000 Machine complete with: • No. 03 radial motorized modules • No. 02 universal motorized modules • No. 3 fixed tool holders • Self-centering main spindle Autoblok diam. mm 210 • Self-centering counter-spindle Autoblok diam. mm 160 • Instruction manuals and CE declaration Year of construction: 2004

Condition: good (used), Year of construction: 1979, Functionality: fully functional, drilling capacity: 32 mm, overall weight: 1,870 kg, Drilling capacity into full 32 mm Tapping capacity into full M 32 mm Motor power 1.5 / 3 kW Tool holder MK 4 Quill stroke 170 mm Stroke approx. 400 mm Fgjlik S Aowgahbs Eeb Speeds : Range 1 , infinitely variable from 38 - 192 rpm Range 2 , infinitely variable from 119 - 596 rpm Range 3 , infinitely variable from 400 - 2000 rpm

Condition: used, Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 203240/43, total height: 2,300 mm, total length: 3,300 mm, table height: 880 mm, overall weight: 1,080 kg, We are offering our Shark 442 CCS band saw for sale. The machine is in working order. Pick-up only. We are happy to answer any questions you may have. Fjliswhkkiek S A Esgb