Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: B0702A0549, Trumpf Trubend 7036 press brake Press force 360 kN/36 t Fgslq Seu A Dcaeyqpsb Bending length 1020 mm 6-axis controlled backgauge BendGuard Graphic control Automatic tool clamping Tool-free

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: 714, Tekna TK 641 high-performance post milling machine Fgslq Sewhpmpeyqpob 1.5 HP engine RPM 7200 Weight 195 kg Ability to machine profile ends at any angle from 45° to 90° Automatic cutting lubrication. Built-in safety devices. Automatic chip removal. High rotation speed for a perfect finish. Maximum cutter diameter: 160 mm Speed: 2800 rpm Engine: 1.5 kw

Condition: excellent (used), Year of construction: 2011, Prima Industrie Platino 1530 laser cutting machine only 4300 hours cutting hours Fgjlq Syjivg Hgoqpob This Prima Industrie Platino 1530 laser cutting machine 4,0kW CO2 was manufactured in Italy in the year 2011 and installed at the end of 12/2011. PRIMACH 20 L control unit.

Condition: excellent (used), Year of construction: 2023, saw blade diameter: 460 mm, cutting capacity: 146 mm, total height: 2,000 mm, overall weight: 2,700 kg, space requirement length: 2,200 mm, space requirement width: 1,950 mm, TECHNICAL SPECIFICATION .. max. diameter of saw blade: 460 mm .. cutting capacity round: 146 mm .. cutting capacity square: 138 mm .. mitre cutting: no .. .. oblong: 250 mm .. .. .. x: 100 mm Fgelsvyziuoq Syqpob .. .. to: 220 mm/min DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2200 mm .. space requirements -front/back-: 1950 mm .. total height: 2000 mm .. total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

Condition: ready for operation (used), Year of construction: 2009, operating hours: 54,710 h, Functionality: fully functional, laser power: 4,000 W, sheet thickness (max.): 8 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,250 mm, TECHNICAL DETAILS X-axis working range: max. 2,550 mm Y-axis working range: max. 1,250 mm Control: Rexroth IndraMotion MTX Travel speeds X-axis: 100 m/min Y-axis: 60 m/min Simultaneous (X and Y): 116 m/min C-axis and stroke sequences C-axis punching: 330 rpm C-axis tapping: 330 rpm Max. stroke sequence punching (E = 1 mm): 1,200 rpm Max. stroke sequence marking: 2,800 rpm Tool technology Linear magazine: 22 tools with 3 clamps Number of tools when using MultiTool: 22 – 220 Tool change time: 0.3 – 2.8 s Laser Laser power: 4,000 W Fgslowhpbteq Syqpjb Laser type: CO₂ laser TruFlow 4000 Lens: 170 mm C-axis rotation: 360° Laser control: TASC Functions: Thread forming, MultiBend, MultiTool, deburring, and rolling technology Punching Punching force: 220 kN Punching head: electro-hydraulic Tool rotation: 360° Pressure clamp: programmable (active / passive / repositioning) MACHINE DETAILS Dimensions (L x W): 8,000 x 6,700 mm Height: 2,500 mm Weight: 24,100 kg Operating times Control operating time: 58,842 h Laser operating time: 54,710 h Beam operating time: 15,518 h EQUIPMENT - 3 Clamping clamps - Slag cone detection - Flap for laser parts 500 x 500 mm with sensor - 2 good part containers for punched and laser parts - Chip container - Ejection cylinder for laser parts - Quick-change device for cutting head - Punch slug extraction - Adaptive stroke calibration - Programmable hold-down device (active/passive/repositioning) - Tool length compensation - Active die - Parts conveyor belt at punching and laser station - Chip conveyor with tilting container - Blow-out device for small parts - SheetMaster with suction frame (36 suction cups, Y-axis 400 mm, V-axis 170 mm) - Skiving suction cup with vacuum sensor - Automatic clamp closing - Sheet thickness gauge for double sheet control - GripMaster with scrap skeleton tilting pallet (2,500 x 1,250 mm) - Double unloading cart - Parts conveyor belt Punching station - Parts conveyor belt, laser station - Storage interface - Table extension - Brush tables - Various safety devices

Condition: used, Year of construction: 1996, Bridgeport VMC 760/22 Vertical Machining Centre with Heidenhain TNC 370 Control, 3 Axis, 22 Tool ATC, 1000 x 500mm Bed, Airbench Oil Mist Filter System. S/No. 21108 (1996) Felq Sewhpbgjyqpegb Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), Clamping plate, marking plate, measuring plate, measuring table, surface plate, marking plate -Manufacturer: Stolle, clamping plate: with support ribs -Length: 2005 mm -Width: 1500 mm -Plate thickness: 40 mm -Plate: with support ribs Fgslq Sowgdh Esyqpjb -Transport dimensions: 1500/2005/H500 mm -Weight: 1800 kg

Condition: excellent (used), Functionality: fully functional, Year of construction: 2008, machine/vehicle number: 9123, massive, rigid milling machine for large posts with a milling cutter that can be adjusted steplessly vertically manual feed 2.2 kW 400V motor 2,800 rpm milling cutter speed maximum milling cutter diameter 300mm profile mounted at an angle of 20°-90°-20° (according to the scale) maximum cut-out width 400mm (at an angle of 90°) maximum cut-out depth 110mm maximum profile height 190mm stepless milling height adjustment (handwheel and scale), Felqowhpk Ie Syqpjgb adjustment range 0 - 100mm quick cutter change system pneumatic material clamping cooling and lubrication system

Condition: used, Year of construction: 1998, CNC Lathe Manufacturer: Spinner Type: MT 500/1000 Year of Manufacture: 1998 Operating Hours: 33,499 Control: Siemens 840D Sauter 12-station disc turret with electric drive EK 400 control unit Travel X/Z: 200 mm / 921 mm Turning Diameter: 200 mm Spindle Bore: 45 mm Speed: 36 – 3,600 rpm Haase Quick-Change Toolholders: 1 Turret VDI 30: 12 Ball Screw in X Pitch: 5 mm Ball Screw in Z Pitch: 10 mm Rapid Traverse X: 15,000 mm/min Rapid Traverse Z: 20,000 mm/min Feed X+Z: 0-4000 mm/min. Feed force X-axis: 1382 daN Fsljv Rmu Rjq Syqpjgb Feed force Z-axis: 609 daN Pull force hollow clamping cylinder: 145 daN/bar Manual chuck: Three-jaw Ø 200 mm Hydraulic chuck: Three-jaw Ø 210 mm Coolant tank: 75 liters Coolant pump flow rate: 30 l/min. Coolant pump pressure: 1.4 bar Quill diameter: 80 mm Quill stroke: 120 mm Morse taper mount: MK 4 Weight approx.: 2300 kg Dimensions LxWxH approx.: 2700 x 1600 x 1800 mm 080525ä

Condition: used, Year of construction: 2013, Functionality: fully functional, machine/vehicle number: H-H30888, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Type: "VMX 30i" equipped with WinMax control, chip conveyor, internal cooling, spindle cooling On request CNC configuration: − NC production package − Industrial standard NC − Pocket with islands − Helix − Synchronous thread − Surface selection − Tool & material database − Ultimonitor Machine configuration: Table clamping area 510 x 1020 mm Travel paths X-axis Y-axis Z-axis 760 mm 510 mm 610 mm Spindle mount SK 40 24-station tool changer Infinitely variable spindle speed Fgelqowgdd He Syqpsb 12,000 rpm Rapid traverse 35,000 mm/min Contour feed 15,240 mm/min Space requirement 3,900 x 4100 x 2800 mm Transport dimensions 2300 x 2300 x 2550 mm Weight 5 tons The machine is connected to the power grid and can be inspected with power on by appointment. Technical specifications and dimensions: Errors excepted. Prices are quoted: plus VAT, ex warehouse, freight prepaid. Delivery time: immediately available from stock, subject to prior sale. Payment: Advance payment. Sincerely, Wiegand

Condition: new, Year of construction: 2025, Y250 HC10 Laser Laser Welding System Compact, Flexible, Easy to Use - Integrated Robot Controller (YRC1000) - Yaskawa HC10DTP Cobot - Inxpect Radar Sensors / Increased Safety - Easy Mobility with the Pallet Truck - Extremely Simple Programming - Easy to Teach with the Yaskawa Smartpendant - Industrial Mode for Increased Speed Scope of Delivery: 1x Yaskawa HC10DTP Cobot with Integrated Robot Controller (YRC1000), Profinet, and Smartpendant (tablet programming device). Delivered assembled and ready for use on the robot platform. 3x Inxpect Radar Sensors / mounted on the robot platform. 1x Raycus 2kW fiber laser with water cooling 1x Wire feeder for the following wire thicknesses: Ø0.8, 1.0, 1.2, and 1.6 mm. 1x Ospri LWD200 laser head, QBH connector, 75mm collimator, 200mm focal length, water-cooled, including CDD camera and screen. 1x starter set consisting of: 1x Univet laser safety goggles, 5x protective lenses, 5x spare nozzles. Solid robot platform The mobile robot platform consists of a sturdy welded steel construction (250 kg weight) with a powder coating. This allows the robot to run at 100% speed while remaining mobile! Easy to position with the pallet truck. Laser power, power with reserves! Laser power: 1.5 kW - 2.0 kW - 3.0 kW RAYCUS RESONATOR Example: With the 2.0 kW fiber laser source, it is possible to weld steel up to 6 mm, stainless steel up to 5 mm, and aluminum up to 4 mm. The laser is a pure industrial device with water cooling for 24/7 continuous operation. TECHNICAL DATA -Model: Y250 HC10 2KW LASER -Range: 1400mm -Laser Power: 1500-3000W -Total Weight: 350kg -Safety: Inxpect radar sensors -Cobot repeatability: 0.05mm -Wire feed: Ø0.8, 1.0, 1.2, 1.6mm -Mild steel up to 6mm -Stainless steel up to 5mm Fgslqjwhn N Nj Syqpob -Aluminum up to 4mm -Cobot power consumption: 1KVA -Base dimensions: L x W x H 950mm x 750mm x 880mm -Water cooling: Yes

Condition: used, Star SR-20 Type 530G Sliding Head CNC Lathe with Fanuc 16T Control, 5 Axis, Twin Spindle, 6 Turning Tool Bays, 3 End Collet Bays, 3 Side Collet Bays, 3 End Boring Bays, Serial No. 010804, FMB Turbo 3 - 26 Bar Feed, Max Bar Length 3800mm Country of Origin: Japan Fslq Sjwhpaioyqpjgb Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: new, Traub Rollers for Stamag Bar Loaders DN60, DN61, DNH61, 707451, 10561157 (1) Item No.: 707451 (2) Item No.: 10561157 Condition: New Rollers for Stamag DN60, DN61, DNH61, 707451, 10561157 Price per piece. Inner diameter: 17mm Outer diameter: 120mm Thickness: 35mm Traub rollers for Stamag bar loaders DN42, DNH42, 715078, 10828092 VST (1) Item no.: 715078 (2) Item no.: 10828092 Condition: New Rollers for Stamag DN42, DNH42, 715078, 10828092 Price per piece. Inner diameter: 15mm Outer diameter: 85mm Thickness: 23mm Traub rollers for Stamag bar loader DN26 DN30 DNH32 606990 687385 Fslq Syjwhn I Ssqpogb (1) Item no.: 606990 (2) Item no.: 10837472 Condition: New Rollers for Stamag DN26, DN32, DNH30, 606990, 10837472, 687385 Price per piece. Inner diameter: 10mm Outer diameter: 60mm Thickness: 15mm

Condition: used, Year of construction: 2006, operating hours: 6,500 h, Functionality: fully functional, grinding length: 2,000 mm, grinding width: 600 mm, total length: 2,000 mm, total width: 850 mm, workpiece weight (max.): 2,300 kg, grinding height: 750 mm, grinding wheel diameter: 450 mm, table speed: 40 mm/min, spindle speed (max.): 1,500 rpm, power: 15 kW (20.39 HP), input voltage: 400 V, - Machine in very good condition, with few operating hours. - Additional screen installed for better visibility of axis positions. - Accessories included with the machine: see photos. Fgjljwhn Hnoq Syqpjb -Video available on demand. Installation possible by us: quote available.

Condition: used, Year of construction: 1983, total height: 2,200 mm, total width: 1,200 mm, total length: 1,400 mm, outer dimension width: 1,200 mm, outer dimension length: 1,400 mm, Empty weight: 1.000 kg - Year: 1983 - Documentation available: No - Serial number: 108931983 - Control: Conventional - Motor power: 3.0kW - Table width: 440mm Fslqswgc S Ns Syqpjgb - Table length: 560mm - Ram width: 140mm - Ram length: 180mm - Min. stroke: 8mm - Model: Eccentric - Max. stroke: 88mm - Height adjustment: 55mm - Power: 40.0ton - Transport dimensions: 1400mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), Year of construction: 2011, operating hours: 22,000 h, Functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, total height: 3,000 mm, total length: 3,000 mm, total width: 2,880 mm, table width: 600 mm, table length: 600 mm, table load: 250 kg, rotational speed (max.): 15,000 rpm, overall weight: 9,200 kg, For sale is a 3+2-axis Emco MaxxMill 500 machining center. The machine is fully functional and is being sold due to downsizing. Technical specifications: Year of manufacture: 2011 Control: Heidenhain TNC 620 Operating hours: 22,000 X travel: 650 mm Y travel: 550 mm Z travel: 500 mm B-axis: ± 100° C-axis: nx360° Spindle distance: 150-650 mm Workpiece support area: 600*600 mm Max. workpiece weight: 250 kg Max. speed: 15,000 rpm Max. torque: 100 Nm Max. power: 20 kW Tool changer: 30-station Tool holder: SK40 Dimensions: 2,880 x 3,000 x 3,000 mm Total weight: 9,200 kg Included in the offer: Chip conveyor (scraper belt), Heidenhain 3D probe, Heidenhain handwheel Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices exclude VAT. Viewings are available by appointment. Contact us; our team will be happy to assist you. Trade-ins or exchanges are possible! Fgjlqswgc Hme Syqpsb Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, visit our website

Condition: used, Year of construction: 2007, Star SR-20RIII Type 680 Sliding Head CNC Lathe with Fanuc 300iS Control, 5 Axis, Twin Spindle, 14 Turning Tool Bays, 4 End Collet Bays, 4 End Collet Bays, 5 Side Collet Bays, Nobec Fire Suppression System. S/No. 0119 (008) (2007) Run Time - 14998H42M95, FMB Turbo 3 - 36 Barfeed, 3200mm Max Work Piece Length. S/No. 41-260-479/R 565589. Star G42000 High Pressure Coolant System. S/No. 222 (2007) Country of Origin: Japan Fjlq Syqewhn Uxjpegb Please Note: This lot is located in Hampshire, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: new, Traub Telescopic Cover, Telescopic Sheet, 945334 TNC42 TNC65 (1) Item No.: 945334 (2) Item No.: 10732161 Fgoljwhn H Usq Syqpob Condition: New Traub Telescopic Cover, Telescopic Sheet, 945334 TNC42 TNC65

Condition: used, Year of construction: 2012, XYZ SLX425X 1,250 CNC Lathe. S/No. L522 (2012) with Prototrak SLX Control. Country of Origin: United Kingdom Fgelq Syewhn Swoqpob Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2007, Haas TL-2CE CNC Lathe. S/No. 3080208 (2007) with Haas CNC Control, 300mm 3 Jaw Chuck, Tailstock. Country of Origin: U.S.A Fgelq Syqewhn Ryopeb Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2007, Hurco TM8 CNC Lathe. S/No. TM8-01111057AAA (2007) with Winmax Control, Collet Chuck, Tooleye, Parts Catcher, 12 Station Turret, Tailstock, Swarf Conveyor, Multi-feed, Bar Feed Fslq Sswhn Npeyqpjgb Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2017, Hurco TM6i CNC Lathe. S/No. ST6-16101AZEAAAH (2017) with Minmax Lathe Control, 200mm Diameter 3 Jaw Chuck, Tooleye, Parts Catcher, 12 Station Turret, Hydraulic Tailstock, Swarf Conveyor, Hydrafeed Multi-feed 35 Barfeed Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Fgslq Syjwhn Huoqpjb

Condition: used, Year of construction: 2004, Haas VF-2DHE Vertical Machining Centre. S/No. 34618 (2004), 24 Position ATC, Table Size 915 x 355mm, SK40 Taper. Country of Origin: U.S.A. This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Fgolowhn Edoq Syqpjb

Condition: used, Year of construction: 2008, Hurco VMX30M Vertical Machining Centre. S/No. S342-06119078DJA (2008) with Max Control, Table Size 1020 x 510mm Fgslswhn Aioq Syqpeb Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2011, Hurco VMX30M Vertical Machining Centre. S/No. S342-16102081DJA (2011) Fgolq Syqswhn Acjpsb Location: This lot is located in Northampton, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.