Used briquetting presses for sale (39)

Condition: new, Year of construction: 2026, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Nedochqxxspfx Ah Hewb Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) Demonstration machine with approx. 10 operating hours Your advantages: + Very robust, simple technology + Top price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning / established machine Including control cabinet with timer operation Press is switched on manually and then runs until the time set on the timer (e.g. 4 hours) has elapsed. Then the press switches off. Technical data: Briquette dimensions: approx. 35 x 35 mm (square), Briquette length: 5-40 mm *depending on material Throughput capacity up to 25 kg / h *depending on material Machine dimensions approx. 137 x 75 x 148 cm (length x width x height), Weight of the machine: approx. 250 kg, Capacity of the silo: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: -Wood chips and dust smaller than 15 mm in length -Moisture content less than 18 % ATRO -Sand, stones, metals and minerals increase wear Nedpfx Asfci D Ajh Howb --- Options at extra charge: -Timer function + 490 € net Machine is started manually and switches off automatically after a set time X. -Level indicator for automatic operation + 1450 € net Press starts and then stops automatically * NEW !!! Also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, C7m2mgj Surcharge + 690 € net (delivery time then approx. 8 weeks) ---

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Nodpow R Ranofx Ah Hewb Colour: Textured paint, RAL 7035 light grey

Condition: used, Year of construction: 2017, operating hours: 900 h, functionality: fully functional, machine/vehicle number: 2575, Model/Type: RUF 18.5/5000/80 Machine No.: 2575 Year of Construction: 2017 Nwedpfx Ahst Sfxmo Heb Drive Motor: 18.5 kW Throughput Capacity up to max.: 550 kg/h (depending on material) Pressing Pressure: approx. 5000 kg/cm² Briquette Format: 80 mm Running Hours: approx. 900 h Warranty: 12 months after delivery Availability: approx. 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 + 600 x 1,000 mm hopper + Electrical emulsion pump + Spraying device + Extractable screw + Speed-controlled pump

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW: 1. Briquette Diameter: Ø 120mm 2. Capacity: 1.800 – 2.200 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 15 tons 4. Main Compression Cylinder Thrust: 400 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 75 kW 8. Machine Dimensions (Width x Length x Height): 3.200mm x 4.200mm x 3.500mm 9. Machine Weight: 13.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. Njdpedfc Ikjfx Ah Hswb 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW. SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 200mm 2. Capacity: 12.000 kg/hour ( Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 850 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 10 - 12 sec 7. Electric Motor Power: 6x37=222 kW (Main Motors) 8. Machine Dimensions : 11.000mm x 10.000mm 9. Machine Weight: 60.000 kg Nedpfx Asgv I N Ujh Howb 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 160mm Nodpfx Ahegv I Ihj Hjwb 2. Capacity: 4.500 – 5.500 kg/hour (Iron & Steel) 3. Preliminary Compression Ram Thrust: 50 tons 4. Main Compression Cylinder Thrust: 600 tons 5. Maximum Working Pressure: 300 bars 6. Cycle Time: 12 - 14 sec 7. Electric Motor Power: 170 kW Overall 8. Machine Dimensions (Width x Length x Height): 5.200mm x 8.000mm x 3.100mm 9. Machine Weight: 42.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are PARKER or BOSCH-REXROTH brand. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, Year of construction: 2025, Also, different models are available! IMPORTANT: MACHINE WILL BE BRAND NEW SEE THE TECHNICAL DESCRIPTION BELOW 1. Briquette Diameter: Ø 80mm 2. Capacity: 700-900 kg/hour ( Copper ) 3. Preliminary Compression Ram Thrust: 12.5 tons 4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 ) 5. Maximum Working Pressure: 300 bars Nwsdpfjgwa Urex Ah Hjb 6. Cycle Time: 12 - 14 seconds 7. Electric Motor Power: 30 kW 8. Machine Dimensions (Width x Length x Height): 2.200 mm x 2.600 mm x 2.800 mm 9. Machine Weight: 6.000 kg 10. Screw drive feeders will fill the compression chamber automatically and a built-in vibrating hopper will provide safety to the chamber by preventing the oversize material from entering the chamber. 11. Cylinder Rods are induction-hardened and chrome plated. 12. A Hydraulic Oil cooling system is implemented. 13. Pumps and valves of hydraulic systems are from worldwide reputable brands such as PARKER. 14. The machine is fully automatic by PLC control. 15. All electrical and electronic parts are by SCHNEIDER or SIEMENS Brand. 16. The machine is CE certificated. The marking certifies that a product has met European Directives regarding consumer safety, health, or environmental requirements. 17. Machine will be under AYMAS Makina San. Ve Tic. A. Ş. Guarantee against manufacturing defects for one (1) year or two thousand five hundred (2.500) working hours.

Condition: new, New and used briquetting presses. Do you need a briquette press? Contact us. We have many years of experience in machines for briquetting materials such as wood, biomass, paper and much more. We have more than 20 years of experience. Presses for round or rectangular briquettes. We ship alle over EU. Nwodpfsx S Ii Rjx Ah Hob Capacity from 20 to 400 kg. per hour.

Condition: used, Year of construction: 2013, functionality: fully functional, total width: 860 mm, total height: 1,800 mm, total length: 3,100 mm, briquette diameter: 65 mm, overall weight: 3,800 kg, We are selling our used briquetting press from the manufacturer Mütek, as shown in the photos. Model: MAP 750 Year of manufacture: 2013 Nedpfxsxxyy Ej Ah Howb Diameter: 65 mm Main motor power: 37 kW Feed auger gear motor: 2.2 kW Compactor auger: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Siemens PLC S7/300 controller with operating hours counter in the control cabinet Machine has CE marking Automatic start-stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 3,800 kg Included accessories: - Storage silo above the machine (6 m³) - Briquette channel extension without gate (2 m with stand) - Temperature control unit - Cutting device (trims briquettes to equal length) - Cyclone for material injection, incl. frame - Rotary valve The machine is still installed and operational, so a functional test on site is of course possible. Net price: €90,000. Gross: €107,100. VAT can be stated separately.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x1800x1900 mm Njdpfx Ahsvz Ex Ns Howb Weight 3000 kg Total power requirement 33,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1850x1500x1230 mm Weight 870 kg Nedpjvz Eqlsfx Ah Hswb Total power requirement 8 kw

Condition: new, Year of construction: 2025, Another machine immediately available! Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Nsdpov Rpxljfx Ah Howb Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Condition: used, Year of construction: 2012, total width: 1,380 mm, total height: 1,710 mm, total length: 2,100 mm, This is a set, consisting of a briquette press with extraction Exhaust capacity 5.800 m³/h - Year: 2012 Nwjdpfxjxr Dz To Ah Hsb - Documentation available: No - CE certificate present: No - Transport dimensions: 2100mm x 1380mm x 1710mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2010, total width: 2,080 mm, total height: 1,900 mm, total length: 2,440 mm, Briquette press; Nsdoxqdxcspfx Ah Hewb Höcker Polytechnik BrikStar C 3-19-L 4.3kW, 400V 25kg/h Funnel volume 3m³ Oil tank 50l Dimensions; 2015x2360x1300mm, 830kg - Year: 2010 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 2440mm x 2080mm x 1900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2019, total width: 890 mm, total height: 1,100 mm, total length: 1,860 mm, Empty weight: 390 kg - Year: 2019 - Documentation available: No - CE certificate present: No - Serial number: 355 - Transport dimensions: 1860mm x 890mm x 1100mm (l x w x h) - Transport weight [kg]: 390kg - Transport packages [pcs.]: 1 Nodpfx Asxixbvoh Hjwb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, Briquette press Weima TH 400 Year of construction 1998 Briquette diameter 50mm Nwodpfx Ajwh I Ureh Heb Capacity 60-80kg/h Machine no. 950-756 Main motor 7.5kW 200 Bar, 400V Including large collection container Machine is currently not working, the hydraulic block is leaking. - Year: 1998 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2017, operating hours: 854 h, total width: 2,450 mm, total height: 1,100 mm, total length: 1,900 mm, Empty weight: 800 kg Price: On request - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5037411-000150 - Operating hours: 854 - Transport dimensions: 1900mm x 2450mm x 1100mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 2 Financial information Nwjdpjxan Utsfx Ah Hob VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, functionality: fully functional, Place: Austria Available immediately Nedpfx Asxy Nkpsh Hswb

Condition: ready for operation (used), Year of construction: 2001, operating hours: 56,927 h, functionality: fully functional, Manufacturer: ATM Recyclingsystems GmbH Model: ArnoBrik 15 Year of manufacture: 2001 Briquette diameter: 150 mm Technical Data Briquette diameter: 140 or 150 mm Capacity: - Cast iron chips: 4.8 – 5.3 t/h - Steel chips: 4 – 5 t/h - Mixed briquetting: 4 – 5 t/h - Aluminium chips: 1.6 – 1.8 t/h Mixed briquetting: 4 – 4.5 t/h Tyre wire: 2.5 – 3 t/h Hourly throughput depending on material Briquette density for steel and cast iron: 5.5 kg/dm³ Operating pressure: 300 bar Required space (L x W x H): 13,500 x 6,500 x 2,000 mm Machine weight: 30 t Main cylinder force: 5,300 kN Oil requirement: 2,800 litres Main drive: 4 x 30 kW Connected load including ancillary equipment: approx. 150 kW Briquette height: 110 - 140 mm Briquette weight – depending on material: approx. 10 - 16 kg Cycle time: approx. 10 sec Nodjxy E H Hspfx Ah Hewb

Condition: ready for operation (used), Year of construction: 2014, operating hours: 7,822 h, functionality: fully functional, Manufacturer: ATM Type: ArnoBrik 10 Year of manufacture: 2014 Briquette diameter: 105 mm Technical Data Main Dimensions Length x Width x Height: 4,250 x 3,600 x 2,200 mm Weight approx.: 10 t Briquette diameter: 105 mm Briquette height depending on material: approx. 60 - 120 mm Performance Data Nsdpfxjxy E Evs Ah Hjwb Cycle time: 10 sec. Hourly capacity: - Aluminium: 850 - 1,060 kg/h - Steel, cast: 1,800 – 2,000 kg/h - Nickel: 1,800 – 2,000 kg/h Briquette weight (aluminium): 2.0 – 2.5 kg Briquette density (steel, cast): 5.5 kg/dm³ Briquette density (aluminium): 2.2 – 2.5 kg/dm³ Hydraulic System Number of power-regulated axial piston pumps: 2 units Power requirement per pump unit: 30 kW Operating pressure: 300 bar Hydraulic tank volume: 1,300 l Electrical Equipment Drive power: 70 kW Control voltage: 24 V DC Operating voltage: 3 x 400 V / 50 Hz

Condition: new, Year of construction: 2026, Briquetting press NEM 900: production time appr. 5 months for briquetting aluminum chips Throughput: up to maximum 320 kg / h * more details after a free test with heard material . Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm . Technical specifications: Total connection: approx. 31 kW In continuous operation approx. 22 kW 400 volts / 50 Hz / 3 phases Pump: 120 + 60 liters per minute Silo: 1 m³ Silo rollers: 1200 mm Including agitator Oil tank: 600 liters Dimensions: 2500 x 1700 x 1730 mm lxwxh Weight: 2250 kg. Hydraulic pre-compression via slide Main press cylinder Vertical cylinder Above for connecting a cooling unit . One and the source material - max.span: 18 mm - Excessive temperature: temperate room at at least + 5 ° C. - max.weight on agitator: 200kg. - The loading must be free of metals and mineral impurities such as sand, stones, etc. This on the pressing tools and / or responsible wear can result Nedpfogfm Ryjx Ah Hswb

Condition: good (used), Good, used condition Main motor: 11 kW Maximum throughput: 200 kg/h Nsdpfx Ahot Hxude Hswb Year of manufacture: 12/2008 / Technically tested: 01/2025 Briquettes: 150x60 mm . *Used machine, purchased as is Functional guarantee upon delivery

Condition: as good as new (ex-display), Year of construction: 2022, Briquetting press for aluminium or steel chips Extremely high pressing force of 3,700 kg/cm² Large storage silo Briquette size: 60 x 40 mm Throughput: Aluminium chips – up to approx. 70 kg/h Steel chips – up to approx. 100 kg/h Brass chips – up to approx. 100 kg/h *depending on feedstock Included: - Emulsion tray Nedpfx Ahew Ig Suo Hewb - Emulsion pump - Oil cooler

Condition: reconditioned (used), Year of construction: 2023, All wear parts new only 704 operating hours Special price for a low-hour demonstration unit Base machine: €29,990 net Optional extras (for an additional charge): - Cooling unit: €3,995 net - Emulsion tray: €3,990 net The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are distinguished by their robust construction, ensuring consistent briquette quality during continuous operation. The pressing process does not require any binding agents – compaction is achieved solely through hydraulic pressing force. Depending on material, the feedstock volume can be reduced by up to 90%. Throughput capacity: maximum 70 kg/h (depending on material) Briquette diameter: Ø 50 mm Motor: 5.5 kW 400 Volt / 50 Hz / 3-phase Pump: 40 liters Maximum briquette length: 50 mm Optimal briquette length: 40 mm Silo diameter: 1,000 mm Oil tank: 110 liters Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Feed material requirements: - Max. chip length: 15 mm - Installation room temperature: heated space, at least +5°C Nodpfxjd N Dnhj Ah Hewb - Max. load on agitator: 150 kg - Feed material must be free from magnetic metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may otherwise occur.