Condition: not inspected (used), Year of construction: 1964, Functionality: unexamined, machine/vehicle number: 22123, spindle speed (max.): 1,000 rpm, table length: 1,120 mm, table width: 900 mm, faceplate diameter: 500 mm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to timely collection between 28.07.2025 and 31.07.2025. Including extensive accessories TECHNICAL DETAILS Gelhcdowvhuujwzsiw Table dimensions: 1,120 mm x 900 mm Faceplate diameter: approx. 500 mm Max. spindle speed: 1,000 rpm Max. faceplate speed: 125 rpm MACHINE DETAILS Year of manufacture: 1964 Serial number: 22123 Dimensions: 5,000 mm x 2,400 mm x 2,600 mm Weight: 7,600 kg Connected load: 5.5 kW Operating voltage: 380 V, 50 Hz Rated current: 11.5 A EQUIPMENT - SONY digital readout

Condition: ready for operation (used), Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Gislhcdjwx E N Iewzsw Immersion pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Clamping fixture with clamping table Clamping fixture with centering tailstock Clamping fixture with centering clamp ZS2 (HICO) Force measuring system KIMISIT 0 – 30 Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Condition: used, Year of construction: 1993, Technical details: workpiece thickness - max.: 80 mm Giolhcsu Id Ruedwzow workpiece thickness min.: 5 mm plate size without being adjusted: 2000x1000 mm size of plate min.: 100x100 mm longitudinal travel: 2800 mm cross travel: 1000 mm control: CNC Mubea Matic100 hole diameter: min/max:10/40 mm tool taper: Kegel/cone/cono DIN 6327 bore spindle stroke: max. 150 mm positioning accuracy: +/- 0,5 mm spindle speeds:: 112-180-224-280-355-560 U/min traversing speed: 80 m/min feed length: max. 150 mm rapid traverse: 8 m/min work table:: L:2500;B:950 mm workpiece weight: 750 kg deburring device max.: d=40 mm work height max.: 1050 mm arm gripping device: 4 Stück/ pcs opening of gripping pliers min/max.: Typ I: 5/45 mm opening of gripping pliers min/max.: Typ II: 45/85 mm air-pressure connection: 6 bar total power requirement: 30 kw Weight approx.: 5,5 t space requirements approx. LxWxH: 5,0 x 5,5 x 2,7 (je nach Aufstellung) m - plate size with beeing adjusted also 1000x4000 mm possible - with roller conveyor 2x1000mm - material supporting table complete with supporting elements, guidance rail for guidance and transportation of the positioning wagons , cooling of the drill via air pressure - control for 2 axis positioning x-axis 80m/min and y-axis 30m/min, - memory capacity approx. 10.000 programs - position wagon/carriage, 2 material support table, material standard gauge railway, - electric cabinet, control panel, hydr. aggregate accessories: - 1 position trolley, 2 material support tables, material web, control panel, hydraulic unit, deburring device Equipment: - 2 pieces drill sleeves, roller track 1800x1000mm and roller tracks 2x1000mm Machine is not under power and ready for transport. *

Condition: good (used), Functionality: fully functional, mount diameter: 80 mm, throat depth: 200 mm, spindle mount: MK 1, table width: 320 mm, table length: 250 mm, drilling stroke: 70 mm, type of input current: three-phase, rotational speed (max.): 1,800 rpm, Equipment: lighting, type plate available, Drilling machine, drilling machine, stand drilling machine, column drilling machine -Manufacturer: Webo, G6 column drilling machine -Motor: 0.75kW 380v 50 Hz Gislhcdwswzaqxezjw morse MK-1 chuck max drill size: M6 -Gearbox: with flat belt coolant pump automatic-manual operation spindle speed per minute -Table size: 320 x 250 mm -Spindle stroke: 70 mm -Reach: 200 mm -Column Ø: 80 mm -Dimensions: 450/600/H1800 mm -Weight: ca 190 kg

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev Gelen N Ekcohcdwzsiw - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: used, bore capacity in steel (diameter) 40 mm throat 385 mm bore stroke 200 mm Gjlhswyxx Eocdwzjiw spindle taper MT 4 turning speed range 61 - 1169 U/min table: 750 x 430 mm weight of the machine ca. 700 kg dimensions of the machine ca. 900x800x2000 mm

Condition: not inspected (used), Functionality: unexamined, machine/vehicle number: 6104, drilling capacity: 40 mm, spindle speed (max.): 2,800 rpm, quill stroke: 200 mm, table length: 1,200 mm, table height: 820 mm, table width: 600 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid commits you to timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Machining Data Drilling capacity in solid material (St 60): Ø 40 mm Drilling capacity in solid material (GG 22): Ø 50 mm Thread cutting (St 60): M 36 Thread cutting (GG 22): M 45 Dimensions and Travels Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1,200 mm x 600 mm Number of T-slots: 4 T-slots (DIN 650): 18 H7 Distance between T-slots: 125 mm Distance spindle nose to table: 185 mm Distance spindle nose to base plate (min.): 985 mm Gielswvi I Nehcdwzow Distance spindle nose to base plate (max.): 1,595 mm Drilling radius: 540 - 1,290 mm Swivel range: 330° Work table height: 820 mm Quill travel: 200 mm Column travel: 410 mm Table Table length: 1,200 mm Table height: 820 mm Table width: 600 mm Rapid traverse X-axis (at drilling radius 1,000 mm): 5 m/min Y-axis: 4 m/min Spindle Speed: 15 - 2,800 rpm Feeds (stepless): 5 – 2,000 mm/min Accuracy according to manufacturer Positioning accuracy X/Y-axis: ±0.075 mm Repeatability X/Y-axis: ±0.015 mm Backlash in working area: 0.02 mm Positioning accuracy Z-axis: ±0.085 mm Repeatability Z-axis: ±0.03 mm MACHINE DETAILS Total height: 2,500 mm Total width: 1,400 mm Total length: 2,500 mm Total weight: 3,000 kg EQUIPMENT - Two-axis digital position display

Condition: used, total height: 1,600 mm, total length: 1,250 mm, total width: 800 mm, Empty weight: 150 kg Tapping machine, drilling and tapping - Documentation available: No - Serial number: 132832 - Control: Conventional - Motor power: 0.6kW - Spindle speed max.: 1600rpm - Model: omboormachine - Table width: 225mm - Table length: 290mm - Spindle speed min.: 320rpm - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) Gislhcdwewywwyezew - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1975, Technical details: bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm Gielovc Aytohcdwzow height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m equipped: - toothed drill chuck up to 16mm Machine on sale as is, without test run. i.D. *

Condition: used, machine/vehicle number: 1900, This Induba pillar drilling machine, model: R1200L30-40, is being auctioned online in our industrial auction / machinery auction for the business closure of Formenbau Köhler - ABUS crane, machines, workbenches, and much more. Gslhcdswyvb Dewzsiw

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Geljlhwr Rshcdwzjiw Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, bore capacity in steel (diameter) 40 mm throat 385 mm bore stroke 200 mm spindle taper MT 4 Gjlhcdowyxxljwzoiw turning speed range 61-1169 U/min table: 470 x 560 mm weight of the machine ca. 700 kg dimensions of the machine ca. 900x800x2000 mm

Condition: not inspected (used), Year of construction: 1979, Functionality: unexamined, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, table length: 1,050 mm, table width: 1,050 mm, rated speed: 1,400 rpm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Drilling depth: 1,200 mm Spindle speed: 50 – 3,000 rpm Centre height: 240 – 1,040 mm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm Feed rate series 2: 18 – 160 mm/min, 35 – 320 mm/min Rated motor speed: 233 – 2,100 / 465 – 4,200 rpm Rapid traverse speed: 3.5 m/min Rated motor speed: 1,400 rpm Rated motor power: 0.75 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW Gielhjwvi Iiscdwzjw Overall length: 6,500 mm Overall width: 3,500 mm Overall height: 2,900 mm Weight: 8 t EQUIPMENT 3-axis digital readout by Heidenhain Including coolant unit

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gear -Manufacturer: Romai, multi-spindle head 2 spindles -Type SMSK 2/23 -Drilling tool holder: MK3 -min. distance drill bit: mm Gelhcdwowyuu Nszjiw -Dimensions: Ø 220 x 455 mm -Weight: 27 kg

Condition: refurbished (used), Year of construction: 2017, operating hours: 248 h, Functionality: fully functional, machine/vehicle number: 428, total length: 3,700 mm, total width: 3,050 mm, total height: 1,700 mm, overall weight: 2,500 kg, The deep hole drilling machine SFT TBM H8-1-400 is in like-new condition after a general overhaul. - Operating hours read: 248 - Machine number: 428 - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 14 kW - Control: SFT TBS 200 Technical data: Drilling method: - Single-lip drilling - Number of spindles: 1 - Drilling range in steel: 1 – 6 mm - Drilling depth with plunge spindle: 120 mm - Sealing housing with one-piece steady rest: 350 mm - Drilling depth with sealing housing only: 400 mm - Max. workpiece length: 450 mm - Max. rapid traverse: 4000 mm/min Spindle drive: - 2 kW at 2810 rpm - 3.5 kW at 7880 rpm - 1.5 kW at 23700 rpm - Frequency range: 100 – 800 Hz Gelhcdwevw A Imozoiw Tailstock: - Motor power: 0.75 kW - Spindle speed: 500 rpm - Max. clamping stroke: 60 mm Slide drive: - Ball screw spindle: 25 x 5 mm with servo motor Drill bushing carrier & chip ejection: - Drill bushing carrier fixed on the machine bed to hold the drill bells - Drill bushing holder and sealing housing from BOTEK - Chip ejection downwards into the chip container Coolant system: - Tank capacity: approx. 500 l - Integrated coolant system with paper belt filter - One-piece coolant pump with frequency converter for stepless flow rate adjustment - Output per pump: approx. 5 - 12 l/min - Max. coolant pressure: 160 bar Other: - Hydraulically attachable tailstock - Manual tailstock adjustment for different workpiece lengths - Items included Deep hole drills and documentation 📌 Note: The machine can be transported on a normal standard truck.

Condition: used, This Gillardon pillar drilling machine, model: Type G50-1, type 50-1600, is being auctioned online as part of our industrial auction / machinery auction – business closure of Formenbau Köhler, featuring ABUS crane, machinery, workbenches and much more. Giolhcdswyva Hswzew

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Gslhcdjwyup Tjwzjiw Width: 3800mm Height: 3400mm Weight: 6500kg

Condition: new, neu Gslhcdwewiq Tmjzoiw ca. 8 Wochen ab Auftragse Spanien 12660 € 243.07 € 40 mm MK 4 350 mm 132-194-277-319-466-666-8 U/min 2.2 kW M33 755 mm 480 mm 2280 mm 490 kg 0,1 - 0,2 - 0,3 mm/U 150 mm 80 - 880 mm 1225 mm 480 x 480 mm 175 mm Automatic feed with mechanical clutch Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front. Depth scale and adjustable depth stop Automatic tool ejector Emergency STOP push button Spindle reversing switch Electric equipment integrated on machine’s head Machined base with coolant tank Worklight MGI: Rotating and tilting table for model 40 Safety drill guard with microswitch CE mark ALTERNATIVE: VERSION BX.40MIT ELEKTROMAGNETIC CLUTCH € 14.710,-- OPTIONS: Electronic speed variato with speed digital reader(VE+TAK) € 1.310,00 A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746 F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader (LBC) € 640,00 Manual tapping system (IR/RS) € 810,00 Manual tapping system for models with variator(IR/RS-VE) € 560,00

Condition: good (used), machine/vehicle number: 403212301, throat depth: 800 mm, total height: 2,700 mm, total width: 900 mm, total length: 2,400 mm, spindle speed (max.): 1,400 rpm, spindle speed (min.): 24 rpm, overall weight: 4,000 kg, table length: 720 mm, table width: 500 mm, Equipment: - With 3 slots - Various drills Gjlhcjwyunpjdwzjiw - Rotary tables - Vice: jaw width 180 mm

Condition: used, Year of construction: 1995, machine/vehicle number: 1746, This Degen pillar drilling machine, model SEB3, is being auctioned online in our industrial/machinery auction due to the business closure of Formenbau Köhler – ABUS crane, machines, workbenches, and much more. Golhewyuzpecdwzeiw

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 6800 € 131.24 € 30 mm MK 3 250 mm 245 - 4000 U/min M25 400 mm 655 mm 1185 mm 280 kg 120 mm 100 mm 85 - 635 mm 1.195 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive Gslhswiq N Uscdwzoiw manual feed left-right drilling automatic tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE Option: Variable speed incl. digital display (VE+TAK) € 1.310,--- Tapping device (IR/RS) € 810,-- Coolant equipment incl. T-slots in the ground plate (ERB) € 910,--

Condition: new, neu 3935 ca. 10 Wochen ab Auftrags Spanien 18150 € 348.48 € 50 mm MK 4 400 mm 54 - 1032 (9) U/min 2.9 kW M36 600 mm 1200 mm 2500 mm 710 kg 0,1 / 0,2 / 0,3 / 0,4 mm/U 230 mm 200 mm 50 - 850 mm 1290 mm 550 x 550 mm Gijlhcowiq H Hsdwzjw 1060 x 600 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE High quality gear drilling machine cooling equipment VDE electric chuck protection left right drilling lighting front handwheel for sensitive feed table turn and tiltable user manual in GERMAN OPTIONS: manual tapping systemIR/IRS € 810,- electronic speed variator with digital read out VE+TAK € 2.110,- digital read out for drilling depth LBC € 640,- ALTERNATIVE: ERLO B-50 VERSION WITH ELECTROMAGNETIC CLUTCH € 20.280,--

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 16480 € 316.42 € 40 mm MK 4 Gjlhewiq Htjcdwzsiw 360 mm 61 - 1.169 (9) U/min 2.2 kW M33 550 mm 950 mm 2363 mm 610 kg 0,1 / 0,2 / 0,3 / 0,4 mm/U 200 mm 175 mm 35 - 835 mm 1240 mm 550 x 550 mm 950 x 550 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE automatic feed gear drive fixed machine table displaceable and rotatable drill head tiltable turntable front wheel for sensitive fine feed coolant equipment lighting OPTION: Manual tapping system € 810,-- ALTERNATIVE: ERLO B-40 VERSION WITH ELECTROMAGNETIC CLUTCH € 18.540,--

Year of construction: 2024, Condition: new, neu 2024 3982 prompt, Zwischenverkauf v Spanien 10830 € 207.94 € 1 35 mm MK 4 Gelhcjwiqvujdwzjiw 300 mm stufenlos 100 - 2.000 U/min 3 kW bis M 27 1100 mm 600 mm 1950 mm 360 kg 0,10 / 0,20 / 0,30 (3) mm/U 150 mm 125 mm 90-890 mm 1250 mm 480 x 480 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE column drilling machine with vario gear 1-stage V-belt drive with stepless variable speed with a frequency converter and digital speed display 3 automatic feeds chuck guard left-right drilling T-Slots and integrated coolant equipment in base stand integrated lighting drill guard HEIGHT ADJUSTABLE, ROTATING AND TILTING TABLE WITH T-SLOTS reverse for tapping fast and precise setting and control of the speed without switching operations and without defined levels more particularly robust parts for wear resistant operation and smooth running compact design with high performance CE norms user manual in GERMAN

Condition: new, neu ca. 8 Wochen ab Auftragse Golswiqrpohcdwzjiw Spanien 6600 € 127.38 € 25 mm MK 3 250 mm 245 - 4000 U/min 0,7 / 1,3 kW M18 400 mm 655 mm 1900 mm 280 kg 120 mm 100 mm 85 - 635 mm 1.195 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS: Variable speed incl. digital display (VE+TAK) € 1.310,--- Tapping device (IR/RS) € 810,-- Coolant equipment incl. T-slots in the ground plate (ERB) € 910,--