Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, wire diameter (max.): 0.3 mm, table load: 500 kg, TECHNICAL DETAILS Travel, X-axis: 350 mm Travel, Y-axis: 250 mm Kdodeytfx Dopfx Ahvji Travel, Z-axis: 220 mm Additional travel (U/V axis): ± 32 mm Worktable (W x D): 590 x 514 mm Load capacity: 500 kg Wire diameter: 0.1 - 0.3 mm Max. workpiece dimensions (W x D x H): 800 x 600 x 215 mm MACHINE DETAILS Control: Mitsubishi - Advance - CNC EQUIPMENT Cutting in water bath Automatic wire threading Wire chopper Cooling unit

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 009, travel distance X-axis: 420 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 350 mm, Tool changer; Kdodpfxjr Iid Ee Ahvoi Tank - 900x600 mm Stroke - 420x320x350 mm

Condition: excellent (used), Year of construction: 2018, Working table dimensions (width x depth): 600 x 400 mm Internal dimensions of working tank (W x D x H): 975 x 555 x 350 mm Fluid level in working tank (min. - max.): 170 ~ 300 mm Working tank volume: 180 L X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 270 mm Maximum workpiece weight: 550 kg Maximum electrode weight: 50 kg Distance between clamping system and table surface: EROWA COMBI / EROWA ITS: 217 ~ 487 mm 3R COMBI / 3R MACRO: 200 ~ 470 mm Distance between table surface and floor: 810 mm Machine dimensions (W x D x H) (including power supply and dielectric tank): 2080 x 1955 x 2350 mm Installation footprint (W x D): 2800 x 2900 mm Machine weight (including NC): 3200 kg Kodpfeyv Ezlsx Ahvodi Air pressure (automatic clamping system): 0.65 MPa Air consumption: 100 l/min (ANR) Total power consumption: 3-phase, 50/60 Hz, 10 kVA

Condition: excellent (used), Year of construction: 2015, Working table dimensions (width x depth): 600 x 400 mm Internal dimensions of working tank (W x D x H): 975 x 555 x 350 mm Fluid level in working tank (min. - max.): 170 ~ 300 mm Working tank volume: 180 L X-axis travel: 350 mm Kdjdpfoyv Eyhjx Ahvji Y-axis travel: 250 mm Z-axis travel: 270 mm Maximum workpiece weight: 550 kg Maximum electrode weight: 50 kg Distance between clamping system and table surface: EROWA COMBI / EROWA ITS: 217 ~ 487 mm 3R COMBI / 3R MACRO: 200 ~ 470 mm Distance between table surface and floor: 810 mm Machine dimensions (W x D x H) (including power supply and dielectric tank): 2080 x 1955 x 2350 mm Installation footprint (W x D): 2800 x 2900 mm Machine weight (including NC): 3200 kg Air pressure (automatic clamping system): 0.65 MPa Air consumption: 100 l/min (ANR) Total power consumption: 3-phase, 50/60 Hz, 10 kVA Working hours: 5.744h

Condition: excellent (used), Year of construction: 2014, functionality: limited functionality, X-axis 400 mm Kdedpfjyvtbyjx Ahvji Y-axis 300 mm Z-axis 220 mm The machine is still in daily use; only the "automatic threading" function is not working.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, X-axis 500 mm Kdjdpfx Ajyvr Tzjhvoi Y-axis 350 mm Z-axis 300 mm U/V axis 75 mm Max. workpiece dimensions 1,050 x 800 x 290 mm Max. table load 1,500 kg Machine weight approx. 4,000 kg

Condition: ready for operation (used), - USED - CNC DIE SINKING EDM X-AXIS TRAVEL: 400 mm Y-AXIS TRAVEL: 300 mm MAX ELECTRODE WEIGHT: 100 Kg MAX  PIECE WEIGHT: 800 Kg Kodjyvlxwopfx Ahvsdi MAX C-AXIS WEIGHT - STATIC/DYNAMIC: 50-10 Kg MAX PIECE SIZE: 220 x 400 x 220 mm TANK SIZE: 900 mm TABLE SIZE: 550 x 400 mm TOOL MAGAZINE: 5 POS CONTROL UNIT: TECHNO 60 WEIGHT: 3000 Kg

Condition: ready for operation (used), Year of construction: 1999, travel distance X-axis: 400 mm, travel distance Z-axis: 250 mm, total height: 2,430 mm, total width: 3,340 mm, wire diameter (max.): 0.3 mm, overall weight: 4,170 kg, product length (max.): 4,010 mm, number of axes: 4, wire diameter (min.): 0.05 mm, This 4-axis CHARMILLES ROBOFIL 4030 Si was manufactured in 1999. It features a maximum workpiece dimension of 1200 x 700 x 400 mm and can handle a weight of up to 1500 kg. The machine is equipped with a wire diameter range of 0.05 – 0.30 mm and a maximum cutting speed of 500 mm²/min. If you are looking to get high-quality wire EDM capabilities, consider the CHARMILLES ROBOFIL 4030 Si machine we have for sale. Contact us for further details. • Workpiece: • Max workpiece dimensions: 1200 x 700 x 400 mm • Max workpiece weight: 1500 kg • Axes travels: Ksdpeyvgl Tefx Ahvjdi • Y-axis: 300 mm • U/V axes: ±48 mm • Wire EDM: • Max wire speed: 15 m/min • Max cutting speed: 500 mm²/min • Tank / dielectric: • Tank dimensions: 850 x 600 mm • Dielectric volume: ~800 l • Electrical: • Power consumption: 45 A

Condition: ready for operation (used), Year of construction: 1996, operating hours: 19,166 h, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,320 mm, total width: 1,250 mm, overall weight: 1,030 kg, number of axes: 3, This 3-axis AgieCharmilles Robofrom 20 die-sinking EDM machine was manufactured in 1996. It features a maximum electrode weight of 25 kg and a table size of 397 x 300 mm. The machine has an impressive axis travel of X=300 mm, Y=250 mm, and Z=250 mm. If you are looking to get high-quality die-sinking capabilities, consider the AgieCharmilles Robofrom 20 machine we have for sale. Contact us for further details. • Machine bed material: Gray cast iron (Grauguss) • Max distance table to spindle: • 455 mm (standard) • 405 mm (Erowa ITS) • 387 mm (System 3R / Hirschmann) • 392 mm (Mecatool) • Max electrode weight: 25 kg (without changer) • Table size (W x D): 397 x 300 mm • Max workpiece weight: 200 kg • T-slots: 3 slots, 12 mm width, 100 mm spacing • Measurement resolution: 1 micrometer • Work tank useful dimensions (H x W x D): 345 x 740 x 520 mm • Dielectric tank dimensions (H x W x D): 530 x 975 x 750 mm • Dielectric capacity: 200 liters (approx. 180 kg) • Filtration system: 3 paper filter inserts • Max machining current: 32 A (optional 64 A) • Input voltage: 3-phase 380/400/420 V, 50 Hz • Installed power: 3 kVA (5 kVA with 64 A option) • Compressed air: 6–8 bar • Cooling water flow: 6 liters/minute • Visual hours: 19,166 Kdjdpfx Ajyu Sm Rehvsi Additional equipment • Sine table (not included; available for sale separately)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Equipment: documentation/manual, Machine model: ALC400G Max. workpiece dimensions (W×D×H): 600 × 470 × 240 mm (Flushing) Max. workpiece dimensions (W×D×H): 600 × 470 × 230 mm (Submerged) Max. workpiece weight: 500 kg (Flushing) Max. workpiece weight: 350 kg (Submerged) Work tank dimensions (W×D): 850 × 610 mm Kdedpfsyu Nqmex Ahvei X axis travel: 400 mm Y axis travel: 300 mm Z axis travel: 250 mm U axis travel: 150 mm V axis travel: 150 mm Taper angle (at workpiece thickness 130 mm): ±25° Wire diameter: Ø0.1 – Ø0.3 mm Wire feed speed (max): 420 mm/sec Wire tension: 3 – 23 N Machining method: Flushing / Submerged Distance from floor to table top: 995 mm Wire bobbin weight: 8 kg Machine dimensions (W×D×H): 2,115 × 2,500 × 2,230 mm Machine installation space (W×D): 3,350 × 3,850 mm Machine weight (including power supply): 3,400 kg Air pressure: 0.5 MPa Air consumption: 30 NL/min Total power input: 3-phase, 50/60 Hz, 13 kVA Dielectric tank external dimensions (W×D): 700 × 2,155 mm Dielectric tank weight (empty): 450 kg Dielectric tank capacity: 675 liters Dielectric fluid filtration method: 3 replaceable paper filters (internal pressure type) Deionizer: Ion-exchange resin (18 L type)

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, workpiece weight (max.): 500 kg, total height: 2,398 mm, total width: 1,690 mm, total length: 1,900 mm, quill stroke: 300 mm, workpiece length (max.): 790 mm, workpiece width (max.): 530 mm, workpiece height (max.): 275 mm, overall weight: 2,800 kg, tank capacity: 410 l, Charmilles Roboform 350 Year of manufacture: 2007 C-frame sinker EDM machine Fixed table with lowering tank Travel (X/Y/Z): 350 x 250 x 300 mm Maximum workpiece dimensions: 790 x 530 x 275 mm Maximum workpiece weight: 500 kg Programmable bath height: 100-325 mm Including pneumatic chuck Erowa ITS 50 / 3R Systems / Hirschmann (choice of one) Maximum electrode weight: 50 kg Without electrode changer Charmilles DPControl operating interface Kjdpfx Aeyu N Skohvodi Operation via 12" LCD color touchscreen Keyboard and hand pendant also available Machine dimensions: 1900 x 1690 x 2522 mm Total weight: 2800 kg The machine will be cleaned and serviced by us upon receipt of order. Afterwards, an EDM test will be performed. We are happy to commission the machine at your site and provide operator training. Optional: - Transport - Cooling unit - Dielectric fluid - Clamping devices

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total length: 1,050 mm, total width: 650 mm, workpiece height (max.): 250 mm, AGIECUT Excellence 3 eCut Year of manufacture: 2005 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Submerged tank machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient machine setup Including AGIESETUP 3D AGIEVISION control system AGIE IPG generator with eCut technologies Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Includes user training at Techma on your overhauled machine Optional services available on request: - Transport - Commissioning - Chiller unit Ksdsyu Iq Ejpfx Ahvsdi - Clamping devices

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, GF Charmilles EDM FO 550 Sp c/w ATC 16 - 2 units Year 2010 c/w RTC 16 (Robot Tool Change) Kdsdpsx Hp Uksfx Ahvsi X-Axis Travel 600mm Y-Axis Travel 400mm Z-Axis Travel 450mm Control Charmilles Touch Tool Changer - RTC16 Power Source 64 AMP C-Axis - Yes Chuck System 3R Cheap Sales

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, machine/vehicle number: 935452, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, overall weight: 4,450 kg, Equipment: documentation/manual, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm Kdedpfx Aoywcivehvei u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: excellent (used), Year of construction: 2007, operating hours: 16,906 h, functionality: fully functional, Sodick AQ 300 L in good condition Operating hours: 16,906 Year of manufacture: 2007-11 Linear servo control X, Y, Z: 300 x 200 x 200 mm U, V: 80 mm Wire diameter: 0.15–0.3 mm (0.25 mm installed) Max. workpiece dimensions: 740 x 440 x 200 mm (X, Y, Z) Max. workpiece weight: 300 kg Chiller Deionization cartridge Kdedeyh E S Dopfx Ahvoi Complete documentation Machine is powered for inspection

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, The GF AgieCharmilles CUT E600 from year 2017 is a powerful and precise used wire EDM machine, specifically designed for demanding applications in the metalworking industry. Thanks to state-of-the-art technology and intelligent controls, the CUT E600 delivers top cutting quality, low maintenance effort, and excellent return on investment. Main Features & Benefits: ✅ Large Working Area: - Workpiece size: max. 1030 x 800 x 350 mm - Max. workpiece weight: 1,000 kg - Travel distances: X/Y/Z: 600 x 400 x 350 mm - U/V axes: ± 50 mm - Taper cutting up to ± 30° / 77 mm ✅ High-Precision Machining: - Position accuracy via glass linear scales - Automatic wire tensioning for consistently precise cutting results - Achievable surface finish: Ra 0.18 µm (steel) ✅ Efficient Wire System: - Standard wire diameters: 0.20 and 0.25 mm - Additional possible wire diameters: 0.10 / 0.15 / 0.30 mm - Automatic wire feeding and re-threading - 25 kg wire spool for extended operation times ✅ Intelligent Control & User Friendliness: - Modern AC CUT HMI control with intuitive user interface - 19-inch touchscreen display for easy programming - DXF import & 3D graphic verification for precise simulations ✅ Reliability & Low Operating Costs: - Energy-efficient generator with low power consumption (9 kVA) - Low maintenance costs due to robust construction and durable wear parts - Integrated collision protection for maximum safety Ideal for: ✔ Tool and mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT E600 – the perfect choice for precise and cost-effective wire EDM! Kdsdpfoyud I Hsx Ahvji 📌 Our used machine from year 2017 is cleaned, overhauled, and thoroughly tested prior to sale to guarantee top quality and reliability. 📩 Contact us for a tailored quotation or a demonstration! We are also pleased to offer commissioning and operator training on the machine upon request.

Condition: used, Year of construction: 2016, Wire erosion / EDM Kdsdpjyudrrjfx Ahvsi Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 350 mm max. workpiece size X: 800 mm max. workpiece size Y: 570 mm max. workpiece size Z: 340 mm max. workpiece weight: 1000 kg U / V axis: 150 x 150 mm submerged

Condition: excellent (used), functionality: fully functional, For sale is a high-performance 600 ERCOCOM II die-sinking EDM machine from Dieter Hansen, equipped with a Heidenhain CNC control. This machine features premium components and is ideally suited for precise applications in tool and mold making. Equipment & Highlights: • Adaptimat with gap process monitoring – specifically for graphite machining to prevent arcing (original price approx. €13,000) • 16-position automatic electrode changer for automated series processing • Erowa clamping system for precise and rapid setup • 3D probe with carbide ball for exact measurement • Cooling system (7 kW) • Integrated fume extraction Kodpsykq U Eofx Ahvjdi The machine offers a robust and professional configuration for demanding EDM operations. "Start with a down payment of €5,000. The machine starts working for you immediately – the remaining 5 installments of €500 each can be conveniently financed from your ongoing revenue." Offer valid for German companies only! Inspection and functional testing are possible by appointment. If interested, we look forward to your inquiry.

Condition: used, Year of construction: 2004, Technical details: table length: 920 mm table width: 600 mm ampere: 13,2 A weight of the machine ca.: 6 t dimensions of the machine ca.: 2,46 x 2,24 x 2,33 m X-axis: 600 mm y-axis: 400 mm Z-axis: 260 mm Kjdpfouzbayjx Ahvsdi max. table load: 1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg. *

Condition: used, Year of construction: 2015, operating hours: 10,500 h, Travel range X - Y: 350 x 250 mm Travel range Z: 315 mm Table: Length x Width: 576 x 400 mm Distance: Table to quill: 550 / 240 mm Kdodpsyvkudsfx Ahvei without chuck max. / min. (optional 615 / 305 mm) Dielectric above table: 365 mm Overall dimensions (W x D x H): 900 x 1680 x 2540 mm Total weight (without fluids): 2000 kg Workpiece weight: 500 kg Electrode weight w/o rotary: 50 kg Electrode weight with rotary: 50 kg with manual locking Rapid traverse speed X - Y: 2 m/min Rapid traverse speed Z: 4 m/min Resolution X - Y - Z: 0.001 mm Resolution C: 0.001° Dielectric requirement: 250 liters Generator: genius magic3 Working current: 50 A Suction capacity: 200 m³/h (55 l/sec) Required cooling capacity: 2.5 kW Floor load: 3.5 N/mm² Number of leveling feet: 3 Weight per foot: 1 t Footplate diameter: ø 60 mm Air flow rate: 10 l/min Required air pressure min.: 6 bar T-slots: Number / width / spacing: 4 slots / 10 mm / 3 x 100 mm Paper cartridge filters: 3 pieces Flushing system: 3 pressure ports 1 suction port 1 fine volume pressure port PROGmodEDM programming software Options 16-position electrode changer Accessories: Tool cabinet with drawers; Probe with 5 mm ball Erowa ER-008638 Magnetic plate 200 x 400 mm (SAV) Various electrode holders

Condition: used, Year of construction: 2019, Travel paths X/Y (mm): 300 x 200 Max. worktable size (mm): 350 x 250 Max. workpiece height (mm): 200 W-axis travel (mm): 350 Z-axis travel (mm): 200 Max. workpiece weight (kg): 150 Electrode diameter (mm): 0.3 - 3.0 Max. amperage: 25 amp Max. power consumption: 3.8 KVA Machine weight (kg): 850 Machine dimensions (mm) (W)1000 x (H)2000 x (L)1100 Kodpfxoyvkqlo Ahvodi

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 530 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, table load: 1,500 kg, Equipment: cooling unit, documentation/manual, Mitsubishi FA20-VS Wire EDM (2006) We offer for sale a high-quality Mitsubishi FA20-VS wire EDM machine, year of manufacture 2006. The machine is in very good technical condition and can be fully tested under power. Basic Technical Data Manufacturer: Mitsubishi Electric Model: FA20-VS Year of manufacture: 2006 Control system: Mitsubishi CNC Axis travels: X: 500 mm Y: 350 mm Z: 300 mm Table size: approx. 780 × 630 mm Max. workpiece weight: approx. 1500 kg Wire diameter: 0.2 – 0.3 mm Machine Advantages • Stable and precise Mitsubishi construction • Suitable for toolshops and series production • Reliable technology with low operating costs Condition and Delivery The machine can be personally inspected under power. Kedpfx Ahjyvhtwjvjdi Delivery may include: • Installation at customer site • Commissioning • Basic operator training Installation can be provided across the entire EU.

Condition: used, Year of construction: 2004, Die-sinking EDM machine Manufacturer: Exeron Model: 312 Year of manufacture: 2004 Control: MF10 Travel X/Y/Z: 450 x 300 x 300 mm Worktable: 820 x 400 mm Work tank: 900 x 520 mm Distance table / quill: 150 / 450 mm Max. electrode mass: 30 / 150 kg Max. workpiece mass: 800 kg Fill height of work tank: 300 mm 20-position tool changer Kedeytrz Sopfx Ahvedi Generator current: 60 A Power supply: 400 V Three-phase current: 50 Hz Power consumption: 8 kVA Overall dimensions W/D/H approx.: 1,910 x 1,798 x 2,300 mm 17326

Year of construction: 2012, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 750 mm Y-AXIS TRAVEL: 500 mm Z-AXIS TRAVEL: 410 mm U/V-AXIS TRAVEL: ± 100 mm RAPID FEEDS X-Y-Z: 1,3 m/min MAX  PIECE WEIGHT: 3000 Kg Kdsdpeytkdrsfx Ahvoi MAX PIECE SIZE: 1300 x 1000 x 405 mm TABLE SIZE: 1100 x 875 mm DRAFT ANGLE / DRAFT HEIGHT: ± 15 °; 360 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,20-0,36 mm CONTROL UNIT: MITSUBISHI 3D Advance WEIGHT: 5700 Kg OVERALL DIMENSIONS: 3495 x 3143 x 2633 mm NOTE: CNC Z AXIS; WIRE CRUSHER; LINEAR SCALES ON X and Y AXIS; 20 Kg REEL OF THREAD UNIT

Condition: excellent (used), Year of construction: 2022, operating hours: 4,204 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 270 mm, workpiece weight (max.): 550 kg, total height: 2,350 mm, total width: 2,025 mm, total length: 2,040 mm, overall weight: 2,920 kg, table load: 550 kg, Operating hours 24,038h, cutting hours 4,204h, tool changer, fire extinguishing system, dielectric tank 400l, max. electrode weight 50kg, extraction system is not included in the scope of delivery. Kdsdpfx Ahjyu R Imsvsi