Used flow forming machines for sale (27)

Condition: used, Year of construction: 2021, operating hours: 4,642 h, machine/vehicle number: 2158, spindle speed (min.): 50 rpm, spindle speed (max.): 400 rpm, feed length Z-axis: 700 mm, controller manufacturer: Siemens, MJC M21-04 SPT-26.150 Machine Data Podpfoy E Hvcex Ahysgk Description: MJC M21-04 SPT-26.150 Installation dimensions: approx. 10,000 × 4,000 × 2,300 mm Machine weight: 19,088 kg Noise level: 80 dB Operating hours: 4,642 h Axis Data Slide travel (Z-axis): 700 mm Feed force (slide): 70 kN Feed speed (slide): 0–125 mm/s Upper slide travel (X-axis): 375 mm Force (upper slide): 70 kN Speed (upper slide): 0–125 mm/s Spindle / Drive Chuck: spring-loaded Spindle speed range: 50–400 rpm Spindle motor: 150 HP (AC vector drive) Hydraulic unit: 20 HP (“Green”) Supply Data Minimum fuel pressure: 1.7 bar (25 psi) Minimum oxygen pressure: 8.25 bar (120 psi) Power requirement: 300 A at 460 V / 50 Hz Max. voltage fluctuation: ±10 % Media / Connections Hydraulic tank oil volume: 150 gallons Hydraulic cooling water consumption: 10 gpm Cooling water connection: ¾", min. 2 bar Max. cooling water temperature: 23 °C Control CNC control: Siemens 840D sl PLC system: Siemens Step 7

Condition: used, Year of construction: 2007, operating hours: 27,953 h, machine/vehicle number: 6915, spindle speed (min.): 10 rpm, spindle speed (max.): 600 rpm, controller manufacturer: Siemens, tool diameter: 600 mm, Denn RL-600 CNC Machine Data Designation: Denn RL-600 CNC Installation Dimensions: approx. 1400 × 5000 × 3500 mm Operating Hours: 27,953 hours Workpiece Data Max. Workpiece Diameter: 600 mm Min. Workpiece Diameter: 100 mm Centre Distance: 5,300 mm Performance Data Pgsdpfx Asy E Hgzehyjk Main Spindle Speed: 10–600 rpm Max. Feed Rate: 5 m/min Control / Technology CNC Control: Siemens Sinumerik HMI: PC-based control panel USB Port: for backing up the machine program CAD/CAM Interface: DXF (AutoCAD 2002 LT)

Condition: used, Year of construction: 2021, operating hours: 120 h, functionality: fully functional, For sale: Victaulic RG 3210 grooving machine for forming pipe ends D60.3 – 323.9 mm. The machine was used for approximately 1.5 years as part of a pipe assembly manufacturing project. Accessories include: lower/upper grooving tool 88.9 – 168.3 mm stainless steel, pipe support stand. As the project has ended, we no longer require this equipment. Original price: 184,440 CZK. Pjdpfx Ahey Hpatjyjgk

Condition: used, Year of construction: 2023, operating hours: 810 h, machine/vehicle number: 22-2261, overall weight: 97,500 kg, feed force X-axis: 2,750 N, feed force Z-axis: 3,500 N, input voltage: 380 V, Information will follow shortly. Psdpfx Aoy A Sccohysgk

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,850 mm, total height: 2,680 mm, total width: 1,650 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, Machine Description The SPB 110T x 3200 (HACO60) press brake is a modern CNC machine designed for precise sheet metal bending in both single-piece and serial production. It features an advanced electro-hydraulic servo system ensuring high accuracy, stability, and repeatability. Equipped with CNC control and synchronization based on linear encoders, the machine guarantees precise ram positioning and uniform bending over the entire working length. The automatic crowning system compensates for table deflection depending on applied force, ensuring consistent bending angles even with large workpieces. Its robust construction, fast tool clamping system, and precise back gauge provide high productivity, ergonomics, and reliability in industrial applications. Technical Specifications Basic parameters: Press force: 1100 kN (110 T) Working length: 3200 mm Distance between columns: 2700 mm Throat depth: 400 mm Stroke: 200 mm Max opening height: 480 mm Speeds: Rapid approach: 180 mm/s Working speed: 13 mm/s Return speed: 170 mm/s Drive & control: Motor power: 8.5 kW CNC system: HACO 60 (USA) Number of axes: 4 + 1 auxiliary axis Accuracy: Ram repeatability: ±0.01 mm Ram positioning accuracy: ±0.02 mm Back gauge repeatability: ±0.02 mm Bending straightness: 0.3 mm / 1 m Bending angle deviation: ±1–1.5° (up to 4 m) Encoder resolution: 0.005 mm Dimensions: Pgodsy D Nviepfx Ahyek Machine dimensions: 3850 × 1650 × 2680 mm Main Features Electro-hydraulic servo system CNC-controlled crowning system Linear encoders on both sides Precision back gauge with linear guides Ball screw driven by servo motor Quick tool clamping system Adjustable front sheet supports

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,280 mm, total height: 2,700 mm, total width: 2,000 mm, overall weight: 11,000 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, PRESS BRAKE 200T × 3200 mm The press brake is used for forming sheet metal. During the slider cycle, the sheet metal can be bent to match the required geometric cross-section. The machine can be used in many industries – electromechanical industry, light industry, agricultural machinery manufacturing, shipbuilding, automotive industry, aerospace industry, etc. Machine Functions Back gauge position control Intelligent position control Recall functions Automatic reference point search Backup and restore parameters with a single identifier Fast position indexing Memory for 40 machining programs, each with 25 steps Power failure protection Technical Data Pressing force: 200 T Maximum workpiece length: 3200 mm Pgedpfx Aheyttbmsyek Distance between columns: 2530 mm Throat depth: 320 mm Ram stroke: 200 mm Maximum opening height: 455 mm Motor power: 11 kW Weight: 11000 kg Machine dimensions (L × W × H): 3280 × 2000 × 2700 mm Equipment Controller MTP-3212 Ball guides for back gauge Two back gauge fingers Two front supports Cylinder covers Optical light curtains (front) Safety gates (rear) Foot pedal AMADA-type punch holder Four-side lower die prism Back gauge driven by electric motor Segmented punch with possibility to remove a damaged segment Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation manual in English Delivery to the customer is possible. Delivery cost according to an individual quotation from the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, The press brake is designed for bending sheet metal. During the ram stroke, the sheet can be bent and formed to the required geometric profile. The machine can be used in many industries, including electromechanical engineering, light industry, agricultural machinery production, shipbuilding, automotive industry, aerospace industry, and many others. Technical data Maximum sheet thickness: up to 6 mm Press force: 125 t Maximum bending length: 3200 mm Distance between columns: 2700 mm Throat depth: 320 mm Ram stroke: 120 mm Maximum opening height: 390 mm Back gauge travel: 600 mm Motor power: 7.5 kW Weight: 7500 kg Dimensions (L × W × H): 3870 × 1550 × 2400 mm Equipment Tools Front supports: 2 pcs Back gauge adjustment (X axis): servo drive Beam adjustment (Y axis): servo drive Back gauge finger height adjustment (R axis): manual Punch clamping system: AMADA-type quick clamping Controller: MTP-3212 The CNC controller features an intuitive and user-friendly menu. The software automatically calculates the bending angle. Possibility to store up to 40 punch types. Pgsdpfxeytp N Ho Ahyek Large color touchscreen display readable from any angle. High-quality components High-quality German Rexroth hydraulic valves Electrical components from Schneider Electric Safety components from Omron and Schneider Steel hydraulic connections The use of steel hydraulic connections significantly reduces the risk of leaks in the future. Ergonomics Thanks to the mobile controller and the control panel mounted on a movable arm, the operator can work flexibly across the entire working area of the machine. Additional LED lighting ensures excellent visibility of the workpiece in all conditions. Discover a new level of comfort and efficiency with our innovative solutions. Safety Our press brakes are designed with maximum operator safety in mind. They are equipped with: clearly visible markings side guards rear safety gate easily accessible emergency switches light curtain preventing accidental access of hands between the punch and die during operation The machine is supplied with a Polish-language user manual, ensuring full understanding of safe operation. The machine also has a CE Declaration of Conformity, confirming compliance with all European safety and quality standards. Specialist assistance We maintain continuous contact with our customers. For every machine we provide technical support from our service engineers and specialists. Our specialists can: assist in determining bending steps for complex parts provide professional advice on selecting suitable materials and tools assist in selecting optimal working parameters for different materials We are here to support you at every stage of the process. Technical consulting Our specialists are available before purchase to help you select the right machine and accessories. Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,155 mm, total height: 2,000 mm, total width: 1,469 mm, overall weight: 3,300 kg, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, PRESS BRAKE 40T × 2000 mm The press brake is used for forming sheet metal. During the slider cycle, the sheet metal can be bent to match the required geometric cross-section. The machine can be used in many industries – electromechanical industry, light industry, agricultural machinery manufacturing, shipbuilding, automotive industry, aerospace industry, etc. Machine Functions Back gauge position control Intelligent position control Recall functions Automatic reference point search Backup and restore parameters with a single identifier Fast position indexing Memory for 40 machining programs, each with 25 steps Power failure protection Technical Data Pressing force: 40 T Maximum workpiece length: 2000 mm Distance between columns: 1650 mm Throat depth: 200 mm Pedpfx Ajyttfrshyogk Ram stroke: 100 mm Maximum opening height: 340 mm Motor power: 4 kW Weight: 3300 kg Machine dimensions (L × W × H): 2155 × 1469 × 2000 mm Equipment Controller E21 Ball guides for back gauge Two back gauge fingers Two front supports Cylinder covers Optical light curtains (front) Safety gates (rear) Foot pedal AMADA-type punch holder Four-side lower die prism Back gauge driven by electric motor Segmented punch with possibility to remove a damaged segment Delivery Conditions The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation manual in English Delivery to the customer is possible. Delivery cost according to an individual quotation from the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: used, Year of construction: 2017, functionality: fully functional, Eccentric press for sheet metal processing with tools. Pgedpfx Ahsytykzjyok

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total height: 1,600 mm, total width: 1,000 mm, overall weight: 1,500 kg, input voltage: 400 V, Metal Technics Polska Professional CNC machines, lasers, and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision, and reliability. HYDRAULIC PRESS BRAKE 1320x40 MM Touchscreen control + SERVO The press brake is used for sheet metal forming. During the ram cycle, the sheet can be bent to match the required geometric profile. The machine can be used in many industries, including electromechanical, light industry, agricultural machinery production, shipbuilding, automotive, and aerospace industries. Pgodpfx Ajyr N E Eehyok Technical Data: Nominal force: 400 kN (40 tons) Working table length: 1320 mm Distance between columns: 900 mm Throat depth: 180 mm Ram stroke: 100 mm Daylight: 290 mm Back gauge range: 500 mm Approach speed: 80 mm/s Working speed: 9 mm/s Return speed: 80 mm/s Main motor power: 4 kW Dimensions: 1500 × 1300 × 1600 mm AMADA Tool Clamping System: Each press is equipped with a quick and safe tool clamping system. The Amada-Promecam system is a reliable manual technology that allows fast tool insertion without additional tools. Control System MTP 3212: Modern controllers combining ease of use with advanced programming capabilities. Touchscreen interface Automatic bending angle calculation Storage of thousands of programs Functions: Manual programming (no visualization) Tool library and editing SD card memory Crowning correction: YES Angle correction: YES Axis correction: YES Safety: Side guards – protection against accidental contact Light curtains – stop the machine when intrusion is detected Rear safety zone – prevents access from the back Delivery available. Transport cost quoted individually.

Year of construction: 2008, condition: good (used), Make: OMERA Type: R 1600 Year: 2008 Specifications Metric US Standard Max. blank / workpiece over bed 1800 Dimensions (Estimate) Length 2800 mm Width 2000 mm Height 2600 mm Weight 4100 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on Downloads Max. blank / workpiece over bed:1800 Length: 2800mm Width: 2000mm Height: 2600mm Weight: 4100kg Pgsdpfxjkvnuue Ahyek Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Max. blank / workpiece over bed:1800 Length: 110.236inch Width: 78.74inch Height: 102.362inch Weight: 9043lbs Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm Table length 2500 mm Table width 1450 mm Spindle diameter 250 mm Spindle Rpm 3 - 20 Gr/1Gr Stroke pinole arm 400 mm Column arm 250 mm Troath arm 900 Height arm 1400 mm

Condition: ready for operation (used), Year of construction: 2000, Line for the production of round tubes and closed profiles from black and stainless steel, with diameters ranging from 20.0 mm to 70.0 mm and wall thicknesses from 0.5 mm to 3.5 mm. Different diameter ranges are possible by manufacturing a suitable set of rollers. The tube or closed profile is formed by rolling the appropriately sized and thick steel strip using a roller set, then joined together by TIG welding. During production, the following processing steps are performed: Pedoxmiirjpfx Ahyogk a) grinding the weld seam b) calibration c) straightening d) and cutting to length The finished product, the 'raw tube', can be further processed to achieve the desired surface structure. Two main finishing processes are used: a) wet grinding using abrasive belts b) and/or dry polishing using polishing wheels and compounds. CONSTRUCTION The tube/profiling line features automatic TIG welding by SAF: a) Tricathode NERTAMATIC 300 TR TIG inverter, 2 units b) Tricathode NETRINOX TH 500 TIG inverter, 1 unit c) Welding of 0.5 – 1.5 mm wall thickness products using E16 torch d) Welding of 1.5 – 3.5 mm wall thickness products using E25 torch e) RETRISAF cooling system 1.1 Steel strip coil support and decoiler 1.2 Roll forming stations a) entry station b) preliminary forming station c) main forming station 1.3 Welding segment – triple-electrode TIG welding heads with inert gas (argon) shielding 1.4 Weld seam cleaning station 1.5 Calibration station 1.6 Straightening station 1.7 Flying saw – product cutting to specified length Additional line components: 1.8 Bossi 4-head tube grinder Type: CPS 400x3000/4 Belt: 3000x150 mm 1.9 Bossi 2-head tube polisher Type: CP 400-2U

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, Roof tile forming machine, manufacturer BUD-MASZ, year of manufacture 2010, mileage 3510 km, coil width 1250 mm, without decoiler. Pgsdpfx Aexbgl Tshyjk

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, overall weight: 2,900 kg, input voltage: 400 V, power: 4 kW (5.44 HP), type of input current: three-phase, Eccentric press PRESSIX 40T Model 40CNV4 Serial No 40/2/88/03 MAchine weight _ 2900 kg Inverter for speed change. Variable speed 60/180 rpm High number of strokes per minute Slider with 4 bronze guides Automatic and centralized lubrication Hydraulic release Pneumatic clutch-brake group Adjustable stroke length using a toothed ring Balancing cylinders Slider adjustment mm 70 Closing height mm 240 Table surface mm 480 x 650x53 Table opening mm 120 Slider surface mm 300 x 370 Hole in the slider mm 50 Power kW 4 User manual and electrical installation in English. Machine in excellent condition. Used for small batches of automatic production. Total: 6,500,000 strokes Pjdpfx Ajyn Rhyehyjgk Programs: tool adjustment, semi-automatic work, auto, automatic work, two-handed work, work with a pedal, turning the mortar in the opposite direction Dismantling and loading are charged additionally

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, overall weight: 5,000 kg, We are offering this refurbished metal spinning machine UD320 CNC-Fanuc, fully overhauled in 2025. This is a metal spinning machine that has been completely refurbished by us and equipped with a new, modern Fanuc CNC control system. We currently own a total of 9 of these machines. Five of these machines have already undergone a retrofit with the Fanuc control unit. The overhaul of other components such as bearings, guides, and slideways is carried out either in-house or through external contractors. We are very familiar with these machines. The hydraulic unit has been custom-built to our specifications. Pgodpjykmmkefx Ahyek If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 31X8030, Mold simulation platform. Manufacturer: STÄUBLI, Type: K8540019, Year: 2011, Serial No.: 31X8030, 2-piece, sliding elements, hydraulic quick-clamping device, quick-change system check (electric/pneumatic/hydraulic), safety light curtains, switch and control cabinets, programming terminal, external hydraulic power units. Mold size 2500x1800mm. Mold inspection platform. Pgedeyh Ryaopfx Ahyjk

Condition: good (used), Year of construction: 1980, Spinning machine Podpfjx Ttplox Ahyogk LEIFELD Spinning moulds

Condition: excellent (used), Year of construction: 2013, operating hours: 20,000 h, functionality: fully functional, For sale: a well-maintained, semi-automatic 180-ton press with low usage, as shown in the pictures. Pgsdpfex Tg Disx Ahyok

Condition: good (used), Year of construction: 1980, center width: 2,350 mm, center height: 1,200 mm, product height (max.): 6 mm, Manufacturer: LEIFELD Type: PLB 1200 Year of construction: 1980 Specifications: Metric Metric US Standard Max. Product over bed 1200 Max. Product in the pit 2260 Ø Center height above the bed 600 mm Distance between the centers 2350 mm Length of the gap 400 mm Max. Sheet thickness 6 mm Stroke X-Axis 1200 mm Stroke Y-axis 300 mm rotational speed 6 - 675 rpm Power output 40 kW Tailstock quill 750 mm Dimensions (estimate) length 4500 mm width Pgsdjq Dqdiepfx Ahysk 3200 mm height 2500 mm weight 10200 kg Please note: The information on this page is given in good faith and to the best of our knowledge and belief, and where possible obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Pjdsxtaxwjpfx Ahyogk Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1987, functionality: fully functional, center width: 825 mm, center height: 350 mm, spindle motor power: 7,500 W, total length: 2,800 mm, spindle speed (min.): 300 rpm, spindle speed (max.): 2,500 rpm, quill diameter: 60 mm, quill stroke: 500 mm, total height: 2,200 mm, total width: 2,000 mm, overall weight: 3,500 kg, product height (max.): 3 mm, feed force X-axis: 2,800 N, feed force Z-axis: 2,800 N, feed length X-axis: 250 mm, feed length Z-axis: 450 mm, feed rate X-axis: 6 m/min, feed rate Z-axis: 6 m/min, The machine is located in our warehouse. It is connected and can be tested at any time. Pedpfx Ahsxfiq Hjysgk

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, I am selling a tetno machine, connected, can be tested. Nominal force: 4000 kN Ram stroke: 1000 mm Passage between columns: 3100 mm Table clamping area: 3100 x 6000 mm Electric motor power: 15 kW Machine dimensions lxwxh: 6000 x 4150 x 4170 mm Press weight: 43800 kg Psdpexwlvpsfx Ahyogk Can send a video of the machine, via whatsapp application

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, center width: 600 mm, center height: 300 mm, spindle motor power: 3,000 W, spindle speed (min.): 200 rpm, spindle speed (max.): 2,000 rpm, overall weight: 500 kg, Manual spinning machine, Make: Pensel Technical data: Pgjdexp Sddepfx Ahyok Centre height: 300 mm Centre distance: 600 mm Machine length: 1500 mm Spindle motor: 3 kW Speeds: 200 – 2300 rpm (stepless) Spindle mount: M 36 Manual steel rest Tailstock stroke: 300 mm (smooth sliding quill) Machine weight approx.: 500 kg Machine description: - Powerful, lightweight spinning machine - Overhauled and ready for use - Main spindle with new bearings - New three-phase motor and belt drive - Main spindle with stepless speed control - New electrical control system - Newly painted

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, overall weight: 300 kg, Cross Slide – Support Type PS 35 Support suitable for hand-operated bending machines with a 350 mm center height Technical Data Longitudinal slide travel: 360 mm Cross slide travel: 150 mm Height: 325 mm Rotary table diameter: 215 mm Shear length: 550 mm Weight approx.: 300 kg Machine Description - Technically inspected and ready for operation - Robust cast iron construction - Adjustable dovetail guides - Trapezoidal spindle for longitudinal and cross slide Podpfx Ahexp Sfheyegk - Large dimensioned handwheels

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, center width: 600 mm, center height: 300 mm, spindle motor power: 3,000 W, spindle speed (min.): 200 rpm, spindle speed (max.): 2,000 rpm, quill stroke: 300 mm, overall weight: 800 kg, input voltage: 400 V, type of input current: three-phase, Hand spinning machine, make Schulte Technical data: Centre height: 300 mm Centre distance: 600 mm Machine length: 1500 mm Spindle motor: 3 kW Speeds: 200 – 2000 rpm (stepless adjustment) Spindle mount: M 36 Manual tool rest Tailstock stroke: 300 mm (quill travel via handwheel) Podpfxsxp Sc Ho Ahyjgk Machine weight approx.: 800 kg Machine description: - Powerful, robust spinning machine - Overhauled and ready for operation - Main spindle newly bearing-mounted - New three-phase motor and belt drive - Main spindle with stepless speed control - New electrical control - Newly painted