Used powder coating systems for sale (85)

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 200 kg, temperature: 220 °C, heating capacity: 115 kW (156.36 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, Powder coating system, manual operation, with 3-zone pre-treatment & cross conveyor Turnkey powder coating system with stainless steel pre-treatment. Maximum flexibility for your production: Cascaded 3-zone pre-treatment including deionized water treatment, energy-efficient oven (gas or electric), and robust conveying system with cross movement. Complete with assembly & training – individually adaptable to your hall dimensions/product range and requirements! For sale: a well-conceived concept for a turnkey, manual powder coating system. The system combines a wet chemical pre-treatment in stainless steel design, a walk-in powder coating booth, an energy-efficient drying and curing oven, and a flexible conveying system with cross movement. All components are designed as a modular basic concept. The system components: 1. Chemical 3-zone spray pre-treatment (stainless steel) process: 1. Degreasing/phosphatization (electrically heated, 72 kW) 2. Rinse with city water 3. Rinse with deionized water Construction: - Robust walls and treatment tanks made of high-quality stainless steel AISI 304. Equipment: - Automatic cascade refill system to optimize water consumption, chemical-resistant and adjustable nozzles, oil skimmer to extend the service life of the degreasing bath, automatic dosing unit, and a powerful exhaust fan (5,000 m³/h). Water treatment: - Including integrated reverse osmosis system (300 l/h) with a 2,500-liter tank and PLC control for consistently high rinsing water quality. - Max. component dimensions: 3,000 x 800 x 1,500 mm (L x W x H). Hsdezu Rpiepfx Ahgst 2. Combined tack water dryer & curing oven (thermoblock): - Working area: 3,500 x 2,000 x 2,900 mm (L x W x H) per oven with a usable opening of 2,000 x 2,200 mm (W x H). - Heating system: combined via gas (Riello BS2 burner, 82 kW) and/or electric (82 kW). - Insulation & recirculation: 180 mm rock wool insulation on walls and roof (100 mm on the floor). Inverter-controlled recirculation with 7,500 m³/h guarantees uniform heat distribution up to max. 220 °C. 3. Walk-in powder coating booth - Dimensions: Generous booth dimensions of 5,000 x 3,000 x 3,200 mm (L x W x H). - Extraction & filtration: Effective extraction capacity of 8,000 m³/h (5.5 kW motor) with 4 cartridge filters incl. auto. pulse air cleaning. In addition, an absolute pocket filter on the roof. 4. Conveying system with cross movement - Load capacity: 200 kg load capacity per carrier or up to 600 kg total load in the trolley. - Layout: Approx. 127 m of rail network including 2 trolleys for the cross-movement trolley, crossbars (L = 3 m) and pneumatic locking and unlocking units for ergonomic material handling. 5. Central Siemens PLC control - Central Siemens 7" color touchscreen: all temperature profiles, rinsing cycles, conveying sequences and extraction systems can be intuitively monitored and controlled. Individual customization options: Since every B2B project is unique, the configuration shown can be customized in almost all parameters: Free scaling of all usable dimensions (L x W x H) of pre-treatment, ovens, and booth. Adjustment of the conveying system to your hall geometry and higher load capacities. Heating type (pure gas, pure electric, or hybrid) can be freely selected. Extension of the pre-treatment zones (e.g., passivation, demineralization).

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 500 kg, temperature: 250 °C, heating capacity: 105 kW (142.76 HP), air demand: 7,000 m³/h, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, Equipment: lighting, Compact powder coating system (complete system) – booth, curing oven, conveying system & Gema technology Complete system for manual powder coating of parts up to 3,000 mm in length and 500 kg payload per carrier. First-class brand-name components (Gema, Siemens, Schneider Electric, Donaldson, Riello), including installation, commissioning and operator training. Overview & Concept Hodpfx Aszu Imrehgot For sale is a brand-new, manual powder coating complete system for workpieces up to 3.0 m in length. The system combines an efficient extraction coating booth, a powerful gas curing oven, and a flexible rail conveying system including steel structure (individual design/planning of a powder coating system possible upon request!). 1. Powder coating booth (double-sided manual coating) - External dimensions (L x W x H): 3,400 x 1,100 x 2,150 [mm] - Workpiece opening dimensions: 500 x 1,600 [mm] - Extraction & filter: 2x radial fans at 4,500 m³/h (ATEX version, 3 kW each); 2 filter units with a total of 6 antistatic Teflon filters (Donaldson, 325 x 660 [mm]) - Cleaning: Automatic/manual compressed air pulse cleaning (6 valves) - Safety/equipment: ATEX-compliant internal lighting, sound insulation in the fan area, control via Siemens/Schneider wall control cabinet Electrostatic powder coating technology (Gema) (other manufacturers can also be supplied upon request) - 2x hand guns: Gema OptiSelect Pro with PowerBoost® technology, ATEX-certified - 2x control units: Gema OptiStar 4.0 CG20 with DVC and PCC precision current control, 250 memory programs, app connectivity - 2x injectors: Gema OptiFlow IG07 with quick-release & non-stick cartridge Convection curing oven (chamber oven with double door) - Internal dimensions (L x W x H): 3,500 x 2,000 x 2,300 [mm] - Max. temperature / operating temperature: up to 250°C / 180 - 200°C - Heating: Indirect thermo block with Riello/Ecoflam burner (approx. 105 kW (90,000 kcal/h)) - Fuel: Natural gas or liquefied gas (LPG) (other energy supply e.g. electricity possible upon request) - Recirculation: 2 x 3,500 m³/h recirculation fans (plus automatic fan exhaust fan) - Insulation: 150mm rock wool insulation Manual conveying system including steel structure Load capacity: Max. 500 kg per carrier Equipment: 5 oven rails, 15 carriers (3m each), 3 transverse transfer trolleys Running trolleys: Equipped with high-temperature resistant bearings Scope of supply & services / Commercial points Included in the price: - Booth with extraction & filter unit - 2x Gema powder coating units - Curing oven including thermo block & burner - Conveying system including steel structure & trolleys - Installation, commissioning & operator training on site

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,636 mm, total width: 2,300 mm, warranty duration: 12 months, workpiece weight (max.): 200 kg, power: 2.2 kW (2.99 HP), temperature: 220 °C, heating capacity: 39 kW (53.03 HP), inner dimension length: 3,225 mm, inner dimension width: 1,400 mm, inner dimension height: 2,000 mm, workpiece height (max.): 1,600 mm, workpiece length (max.): 3,000 mm, volume flow: 4.5 m³/h, fuel: electricity, insulation material: Steinwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 1,200 mm, Complete powder coating system (curing oven 3.2m + spray booth + Wagner/Gema application + conveying system) Like-new, complete powder coating system including a 3.2m electric/gas curing oven, mobile spray booth, Wagner or Gema application + hanging conveying system (200 kg). Ready for immediate use and flexibly expandable! Customer-specific adjustments possible upon request. Maximum flexibility and efficiency for your surface coating Are you looking for a reliable, high-performance, and immediately usable complete solution for powder coating? This complete powder coating system combines top-class industrial components into a perfectly coordinated overall system. Whether for single-part production, small series, or contract coating – the system offers you the ideal combination of high coating quality, low energy consumption, and well-thought-out material flow. The heart of the system is the generously sized electric or gas curing oven with a usable space of 3.20 x 1.40 x 2.00 [m]. The indirect heating via the integrated stainless steel thermal block and the powerful air circulation ensures excellent, homogeneous temperature distribution, which reliably prevents coating defects. The system is complemented by a mobile spray booth, which guarantees maximum flexibility in the hall area due to its design. Together with the proven Wagner/Gema handheld unit, you can apply a wide variety of powder coatings (from standard organic to metallic) precisely and economically. The included C-rail system, with its approximately 27 meters in length and a load capacity of 200 kg per carrier, ensures smooth, ergonomic transport of your workpieces between coating and curing. Important: Does the system not fit 1:1 into your hall? Individual adjustments are possible! Each production facility has its own requirements regarding space, component sizes, and processes. This system can be flexibly adapted to your specific conditions on site. - Tailored dimensions: Oven dimensions or booth sizes can be modified on request. Hodpfeb Dxnwox Ahgst - Expansion of the conveying system: Adjustment of the rail system (layout, switches, usable lengths) to your hall geometry. - Special equipment: Integration of additional components such as pre-treatment, extended control technology, alternative heating methods, or a higher degree of automation. Just contact us! We will examine your layouts and put together a customized configuration for you. Technical data (quick overview) - Condition: New / Unused - Oven interior dimensions (L x W x H): 3,225 x 1,400 x 2,000 [mm] - Max. oven temperature: 220°C - Oven heating capacity: 39 kW (electric or gas, indirect via stainless steel thermal block) - Oven air circulation capacity: 4,500 m³/h - Spray booth dimensions (W x D x H): 2,000 x 2,100 x 2,200 [mm] - Booth extraction capacity: 6,000 m³/h; 3 kW - Conveying system: Manual rail system (C-rail, max. 200 kg / carrier) - Powder gun: WAGNER or GEMA Your contact person & contact Do you have questions about the system, would you like a technical data sheet/offer, or would you like to check how the system can be optimally integrated into your production chain? Contact us now without obligation! We will be happy to advise you on technical details, customization options, and delivery conditions.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 700 kg, workpiece height (max.): 2,300 mm, workpiece length (max.): 6,000 mm, insulation material: Mineralwolle, insulation thickness: 150 mm, workpiece width (max.): 2,000 mm, Equipment: lighting, Complete system with chemical pretreatment (7 zones) for GSB certification (QUALICOAT) (suitable for multi-metal processing) All dimensions and further modifications can be considered during design and planning. The offer includes the following components: Pretreatment booth incl. reverse osmosis system Walk-in coating booth Powder gun Powder curing oven Dryer Manual conveying system Lift/lower station Electrical control Details: 1. Walk-in cleaning booth, pretreatment for steel and aluminum The cleaning booth is designed for automatic cleaning, using medium pressure spraying. The booth contains 7 different spray tanks. The maximum part dimensions are L = 6000 mm, W = 2000 mm, H = 2300 mm. 1 Booth dimensions Length 6,500 mm Width 3,000 mm Height 3,600 mm 2 Dimensions of complete pretreatment system Length 6,600 mm Width 4,640 mm Height 4,300 mm 1. Process Degreasing/Neutral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 2. Process Acidic mineral etching Heated tank, 50-55°C, time = 3-6 minutes, draining time = 80 seconds 3. Process Rinse 1 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 1 minute 4. Process Rinse 2 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds. 5. Process Rinse 3 Rinsing with ambient temperature in this chamber, time = 0.75-1.5 minutes, draining time = 45 seconds 6. Process Nano-ceramic coating This process uses ambient temperature, time = 0.75-1.5 minutes, draining time = 60 seconds 7. Process Overhead spray ring for post-rinsing after process 6 Rinsing with ambient temperature in this process, time = 1 minute, draining time = 60 seconds 8. Process Passivation, no-rinse for aluminum Rinsing with ambient temperature in this chamber, time = 2-3 minutes, draining time = 1-2 minutes 1.1 Reverse Osmosis System Reverse osmosis system 250 liters/hour 1.2 Oil skimmer Tank No. 1 is equipped with an oil skimmer “UniSkim-21-100”. Design: The spray system is in 2 parts and is movable, and is moved up to 500 mm via a pneumatic sliding system. The return feed to the tanks is also movable via a pneumatic sliding system with 7 positions, designed to serve the 7 tanks. 2. Walk-in coating booth 1 Booth dimension Length 7,400 mm Width 4,000 mm Hsdpoffv Tpofx Ahgjt Height 3,236 mm 2 Booth dimension incl. extraction system Length 8,552 mm Width 6,232 mm Height 4,393 mm The booth has 2 pneumatic doors on one side for the entry/exit of workpieces, and an additional side door for the coating operator. 3. Wagner powder coating system, manual system “Sprint 2 B” 4. Powder curing oven 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 2,200 mm 3 Internal dimension Height 3,416 mm 5. Dryer 1 Internal dimension Length 6,500 mm 2 Internal dimension Width 1,200 mm 3 Internal dimension Height 3,416 mm 6. Manual conveying system The conveying system consists of: The conveying system is designed for a crossbar weight of 700 kg, the trolley carries a maximum of 2,000 kg on 3 rails.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 250 kg, temperature: 220 °C, heating capacity: 60 kW (81.58 HP), workpiece length (max.): 4,000 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Professional powder coating system – Compact complete solution meeting industry standards High-performance and flexible: This complete system delivers excellent coating results for workpieces up to 4.0m in length. Equipped with high-quality Wagner or Gema technology, an indirectly heated gas/electric curing oven, and an integrated conveying system. Each component can be individually adapted to your production requirements and space constraints! For sale is a professional powder coating complete system from the trading agency Klaus Benecke, designed for high manufacturing quality and smooth material flow. The system combines a large-volume curing oven with energy-saving rock wool insulation and indirect gas heating for even heat distribution up to 220 °C. A mobile spray booth with a powerful filter extraction system and integrated Wagner/Gema application technology ensures precise coating. The manual rail system with transverse movement efficiently connects the workstations and is designed for high load capacities. A central control system with PT 100 sensors ensures precise temperature control of the entire system. Hjdpfxsffwfxj Ahgst Quick overview (technical details): - Curing oven: 4,000 x 1,500 x 2,200 [mm], max. 220 °C, 150 mm rock wool insulation, indirect gas burner (Riello BS2, 60 kW). - Spray booth: Mobile (2,000 x 2,100 x 2,200 [mm], 6,000 m³/h fan (3.0 kW), 4 cartridge + absolute filters, 60 L powder container. - Coating system: Wagner/Gema manual system (Corona/Tribo, max. 450 g/min). - Conveying technology: Rail system with transverse movement, 72 m rail, 1 trolley, 6 traverses (load capacity: 250 kg/traverse, 750 kg/trolley). - Control system: Control cabinet for oven and booth with PT 100 sensors. Individual configuration: Do you have specific requirements regarding component sizes or throughput? We will plan and configure your powder coating system precisely according to your specifications. Contact us now to discuss your project details.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, temperature: 250 °C, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, Industrial Powder Coating Ovens – Flexible Designs, Sizes & High-End Upgrade Options Are you looking for a powerful, reliable, and efficient curing oven for your powder coating process? We provide customized solutions for every application – from compact chamber ovens to fully integrated conveyor systems! Versatile designs for every process: No matter how your production is organized, we offer the right oven concept for your material flow: - Chamber ovens: Classic design with single-sided doors for batch loading. Hjdpfefhv Tlsx Ahgot - Tunnel ovens: Practical pass-through solution with doors on both sides for an optimized loading and unloading process. - Special ovens for conveyor systems: Specifically designed ovens for continuous production processes, perfectly adapted to automatic conveying technology with a conveyor chain. - Flexible door systems: Depending on space and requirements, optionally equipped with swing doors or space-saving sliding doors. Your oven, tailored to your needs – Standardized performance or 100% custom design: Our standard model range: - Flexible dimensions: Standard internal lengths up to 6.5 m with selectable internal widths of 1.7 m or 1.9 m (standard height: 2.0 m) - Heating according to choice: Fully flexible, available as an electric version or with an efficient gas burner - Versatile loading: Standard preparation for use with rack cars or for integration into a conveying system Individual customized solutions: - Free dimensions & geometries: We manufacture any desired special size, deviating construction heights, or complex spatial geometries exactly according to your specifications - Special heating concepts: Specific burner outputs or adapted heating zones for complex component requirements - Special conveying technology: Tailored integration for integrated overhead conveyor chains, automatic indexing conveyors, or individual crane and lifting systems Smart additional options & upgrades: - Automatic door control: Convenient, automatic opening and closing for sliding doors - Inverter control of the circulating air: When the doors are open, the fan speed is automatically reduced. This prevents the warm air from blowing out, noticeably minimizes energy loss, and saves money. - Temperature curve recording: Complete recording and logging of the curing process for quality and process documentation - Extended sensors & temperature monitoring: All of our ovens have a highly precise, uniform temperature distribution of ±5°C. For the highest quality standards, additional sensors can be integrated upon request to document the homogeneity in the entire oven chamber in detail. Technical highlights of our ovens: Maximum efficiency: High-quality 150 mm rock wool insulation for minimal heat loss Powerful circulating air: High-performance fans for perfect heat distribution and uniform curing results Higher temperature ranges: Maximum operating temperature up to 250 °C Durable & robust: Stainless steel thermo-block with integrated overheating protection and heat-resistant bearings Including control: Complete electrical control included in the scope of supply Contact us! We offer free consultation. We plan and manufacture your powder coating oven exactly as you need it for your production.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 700 kg, temperature: 220 °C, heating capacity: 150 kW (203.94 HP), workpiece height (max.): 2,500 mm, workpiece length (max.): 6,000 mm, Equipment: lighting, Complete powder coating system including pre-treatment, curing oven, conveying system, and assembly For sale is a powerful, well-designed, and fully coordinated complete powder coating system for highly professional coating processes. The system covers the entire manufacturing process – from thorough surface preparation (3 zones) to precise powder application and reliable thermal curing. (Note: A customized design of the system according to customer requirements is possible upon request!) Key data & technical specifications: - Machine type: Powder coating system / complete system - Condition: New machine - System components: Hodpfx Aebhh Awshgst - Combined booth for manual/automatic pre-treatment - Walk-in powder coating booth - Powder curing oven - Manual conveying system - Powder gun - Electrical control system including installation - Usable dimensions (oven / booths): Component dimensions up to L x W x H: approx. 6,000 x 1,500 x 2,000 mm - Oven power / connection value: Design depending on the type of heating (gas / electric) and dimensioning (e.g. approx. 80–150 kW electric or a correspondingly designed gas burner) - Scope of supply: Complete system including on-site assembly Detailed overview of the included system components: 1. Combined pre-treatment booth: - Designed for both manual and automatic pre-treatment steps. Ensures optimal cleaning, degreasing, and application of a primer to the workpieces as a basis for durable coating results. 2. Walk-in powder coating booth: - Ergonomically designed, walk-in booth structure for maximum freedom of movement during coating. Enables efficient powder recovery, quick color changes, and a clean working environment. 3. High-performance powder curing oven: - Uniform heat distribution for homogeneous curing of the powder coatings. Designed for high energy efficiency and stable process temperatures. 4. Manual conveying system: - Robust and flexibly usable transport system for the safe flow of materials between pre-treatment, coating, and curing oven. 5. Ergonomic powder gun: - Modern application technology for uniform powder application, high transfer rates, and first-class surface quality. 6. Central control & electrical system: - Complete electrical control system including wiring, control cabinet, and complete on-site installation, ready for operation. Flexibility & Customization Every manufacturing operation has specific requirements for space, component sizes, and throughput. All components and dimensions of this system can be flexibly adapted to your individual operational conditions and customer requirements. Please do not hesitate to contact us to discuss special dimensions, modified conveying systems, or extended levels of automation.

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 100 kg, power: 88 kW (119.65 HP), temperature: 220 °C, heating capacity: 30 kW (40.79 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 500 mm, insulation material: Steinwolle, insulation thickness: 150 mm, workpiece width (max.): 500 mm, Semi-automatic powder coating system | Batch system with chemical pre-treatment & curing oven Compact, semi-/partially automatic batch powder coating system for steel components (1,500 x 500 x 500 [mm]). Complete system including 2-chamber spray tunnel (degreasing/phosphating/rinsing), flash-off oven, mobile powder spray booth, curing oven (max. 220°C), cardan chain conveyor, and PLC control. New system / project proposal – special dimensions, heating types, layouts, etc. can be individually adapted to customer requirements. System concept & customer-specific customization: Semi-automatic powder coating system in batch mode for the efficient coating of steel parts. The system combines a compact footprint with high throughput and is ideal for small to medium-sized series components. The pre-treatment process is automated in batch mode, and the coating is applied manually. Note on design: Hjdpfsulwg Nsx Ahget The dimensions, assemblies, and heating types listed below correspond to the indicative offer presented. All components (e.g., useful lengths, booth dimensions, chain path, gas instead of electric heating) can be fully customized to your specific component dimensions, space requirements, and process requirements. - Max. component dimensions (standard indicative offer): 1,500 x 500 x 500 [mm] (variable) - Max. load capacity per carrier: 100 kg per batch (higher load capacities on request) - Space requirement / footprint: approx. 12,000 x 6,500 [mm] (layout can be flexibly adapted) - Total connected load: approx. 88 kW (max.) - Batch cycle time / feed rate: Batch dwell time approx. 8.5 - 12 min at a chain speed of 3.2 m/min Technical data (overview of indicative project) System type: Semi-automatic batch system Max. workpiece size: 1,500 x 500 x 500 [mm] (individually scalable) Load capacity / carrier: 100 kg (higher loads can be designed) Oven temperature: max. 220/250°C; operating temperature 180-200°C Heating for dryer/oven: Gas, oil, or electric (indirect) Max. power consumption: 88 kW (depending on system size) Control: PLC (e.g. Siemens) System components overview: Chemical pre-treatment (3-zone spray cleaning): Compact 2-chamber spray tunnel made of stainless steel for degreasing/phosphating (or alternatively nanoceramic) (40 - 45°C) as well as 2-stage rinsing. Complete with stainless steel pumps, PPR nozzle bars, and extraction (4,000 m³/h). Flash-off oven & powder curing oven: Two thermally insulated chambers (100 - 150 mm rock wool) with indirect electric heating (thermoblock with 16 or 30 kW), stainless steel combustion chambers, and powerful air circulation. Dryer up to 120°C, oven up to max. 220/250°C (automatic lift-up doors optional) Mobile powder spray booth: Mobile, open coating booth (2,000 x 2,100 x 2,200 [mm] with ATEX extraction (6,000 m³/h). Integrated filter unit with 4 pulse valves for cleaning, absolute after-filter, and mobile 60 l powder container. Note: Fully enclosed powder booths are also available! Conveying technology & control: Driven cardan chain conveyor with frequency inverter and automatic lubrication unit. Control via PLC for complete control and adjustment of all system processes (control cabinet equipped with Siemens/Schneider) Scope of supply: Complete system including customer-specific design, assembly, and on-site training.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, Equipment: lighting, Fully automatic continuous powder coating system (indexed conveyor, pretreatment, Wagner coating, ovens) For sale is a professional, fully automatic powder coating system as a continuous system (indexed process) from the trading agency Klaus Benecke. The system is ideally suited for the efficient coating of aluminum components as well as other metallic parts. A customized configuration of the system is possible upon request! Highlights & Key Components: - Chemical pretreatment: 2-stage spray booth (L=3,600mm, W=1,500mm, H=2,250mm) including degreasing/phosphatizing and rinsing zone with spray ring. - Flash-off oven: Continuous oven up to 120°C with 40kW LPG gas burner (Riello). (other energy supply possible) - Powder coating booth PVC 3,600: Antistatic plastic booth with mono-cyclone (12,000m³/h extraction capacity) and after-filter. - Wagner Premium application technology: 2 lifting units, 6 automatic PEA-C4 guns, 2 manual guns and control system designed for up to 10 guns. - Curing oven: Continuous oven up to 220°C with 80kW LPG gas burner (Riello). (other energy supply possible) - Conveyor system: Cardin chain conveyor C-100 in indexed operation (50m conveyor length, 54m chain). - Control system: Modern PLC control system with 7" color display (Easy View), inverter and modem for remote maintenance. Technical data: - System type: Powder coating system (continuous / indexed process) - Max. workpiece dimensions: (L x W x H) 2,500 x 800 x 1,200 [mm] - Max. load per carrier: 100 kg/traverse - Estimated throughput: approx. 50 m²/h (both sides) - Material: Aluminum / metal parts - Conveyor belt: Chain Cardin C-100 (50m) - Burner output: Dryer / Oven 40kW / 80kW (LPG gas or other energy source on request) - Control system: PLC with 7" touchscreen Condition: New system / Project Components included in scope of supply: Hedpfx Aoum Uflohgjt - Chemical pretreatment (2-stage spray booth) - Flash-off oven - Powder coating system (PCB 3,600) - Wagner application technology - Powder curing oven - Conveyor system - Electrical control system - Services & accessories

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, temperature: 220 °C, heating capacity: 33 kW (44.87 HP), workpiece height (max.): 1,700 mm, workpiece length (max.): 1,700 mm, fuel: electricity, Compact Starter Package – Powder Coating System (Oven, Spray Booth & Wagner Hand System) For sale is a complete, immediately ready-to-use starter package for powder coating. The system is delivered fully assembled (installation and assembly are not required). On-site, only electrical and compressed air connections need to be provided. 💡 Tailored Solutions & Individual Customizations: Each package can be flexibly adapted to your specific requirements, workpiece sizes, and space conditions. Whether it’s modified oven dimensions, different extraction capacities, additional transport technology, or alternative coating systems – we precisely tailor the system technology to your needs! Package Components & Technical Data (Standard Version): 1. Electric Powder Curing Oven: - Usable dimensions (L x W x H): 2,000 x 1,900 x 2,000 [mm] (dimension adjustments possible upon request) - Thermal output: 33kW (electrically heated) - Max. temperature: 220°C - Recirculating air / Fan: 5,700 m³/h (2.2kW motor) - Equipment: 2 infeed rails for trolley systems, 2 swing doors, rock wool insulation (150mm), stainless steel thermal block AISI 316 2. Open Powder Spray Booth (mobile): - Dimensions (W x D x H): 2,000 x 2,100 x 2,200 [mm] - Extraction capacity: 6,000 m³/h (3.0kW motor) - Filter: 4 filter cartridges + 1 absolute bag filter at the top - Equipment: Hodpfjbqk Nbox Ahgjt - Mobile 60-liter powder container - Electromagnetic valves for cleaning 3. Wagner Hand-Held Powder Coating System “Sprint 2 B” - Application: Corona / Tribo hand coating - Powder output: max. 450 g/min - Processable materials: Organic, tribo, metallic, and acrylic powder coatings - Protection class: IP 64 4. Electrical Control / Control Cabinet Electronic temperature control and control of the entire system

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,593 mm, total width: 2,700 mm, type of input current: three-phase, warranty duration: 24 months, power: 6 kW (8.16 HP), input voltage: 400 V, compressed air connection: 6 bar, volume flow: 15,000 m³/h, filter area: 45 m², sheet thickness steel (max.): 2 mm, High Efficiency Powder Coating Spray Booth "HELSINKI"/ Powder Recovery Booth / Powder Coating Extraction Unit Industrial powder coating spray booth with high-efficiency powder recovery system, German IE5 fan technology, automatic pulse jet filter cleaning, and variable airflow control. Designed for professional powder coating operations requiring reliable airflow performance, efficient powder recovery, low maintenance, and robust industrial construction. Technical Data Power: 6 kW Electrical supply: 3-phase, 380–400 V, 50 Hz Hjdoy N Ubzopfx Ahgst Compressed air requirement: 5–6 bar clean compressed air supply Airflow capacity: up to 15,000 m³/h (variable flow control) Fan: German-made high-efficiency IE5 fan with aluminium impeller Filter system: 3 x antistatic polyester cartridge filters Filter media: 260 g/m² polyester with Teflon + aluminium coating Construction: 2 mm steel, powder coated Mobility: industrial lockable wheels Compressed air connection ports: yes Automatic filter cleaning: yes (pulse jet) Additional outlet safety filtration: yes Accessories holder / hose rack: yes Key Features High-efficiency powder recovery Automatic pulse jet cartridge cleaning Special multiport cleaning nozzles for improved filter cleaning performance Antistatic filter media prevents powder particle embedding Reduces static charge accumulation Easier cleaning and longer filter service life Variable airflow control for different production requirements Energy-efficient German IE5 fan technology Additional outlet filtration for safer operation Compressed air ports for cleaning gun and accessories Heavy-duty industrial construction Mobile design for flexible workshop layout Dimensions Width: 2700 mm Depth: 1608 mm Height: 2593 mm Suitable for Powder coating workshops Metal fabrication Steel structures Aluminium parts coating Industrial finishing lines Custom coating production Manufacturer: Brigas Industries OY Location: Finland Condition: New DISTRIBUTORS WANTED

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total height: 2,700 mm, total width: 2,490 mm, Hercules is a revolutionary, portable system for flame spraying coatings onto metal substrates, drip trays, containers, steel structures, concrete floors, and other surfaces. It represents the most efficient technology for corrosion protection through the application of a thermoplastic, environmentally friendly coating directly on site. Hjdpfx Ahszarzlegst

Condition: new, Year of construction: 2025, A typical coating system consists of surface pretreatment (cleaning and/or application of a conversion coating), intermediate drying, an electrostatic coating zone (booth/powder coating station), and a curing oven. Hodjcv Nl Repfx Ahget The workpieces are transported through the system by a conveyor system. Our company, ROMER®, plans, manufactures, and assembles complete powder coating lines. Our systems can be inspected and tested at our facility in Hürth near Cologne. Request a quote for a system tailored to your specific application.

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Hedpjzqur Hsfx Ahgot Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 44,860 mm, total height: 5,250 mm, total width: 17,100 mm, type of input current: three-phase, workpiece weight (max.): 80 kg, input frequency: 50 Hz, heating capacity: 350 kW (475.87 HP), compressed air connection: 8 bar, workpiece height (max.): 2,000 mm, workpiece length (max.): 800 mm, clearance between the columns: 3,000 mm, fuel: domestic gas H, insulation material: PUR, insulation thickness: 80 mm, workpiece width (max.): 800 mm, Equipment: cabin, lighting, For sale: application section of a powder coating plant from 2021. Application technology: NORDSON ENCORE HD, charging cascades with voltage up to 100 kV, control system POWDER PILOT, feed center SPECTRUM HD II, ENCORE HD spray guns (16 units) + 2 manual guns, HDLV type pump (18 units). Hodpfx Ajwhbnlehgjt

Condition: used, Year of construction: 2007, functionality: fully functional, input voltage: 250 V, We offer this used Wagner Ecotech System powder coating equipment, manufactured in 2007. Hjdpfszn Ixnsx Ahget - Powder coating booth with spray robot (6 spray guns) - Donaldson Torit dust extraction system (11 kW) - 75m automatic Emotec conveyor system (disassembled). Year of manufacture unknown.

Condition: good (used), Year of construction: 2011, functionality: fully functional, total height: 4,000 mm, inner dimension length: 6,500 mm, inner dimension width: 1,500 mm, inner dimension height: 2,200 mm, workpiece height (max.): 2,200 mm, workpiece length (max.): 6,500 mm, Equipment: cabin, Powder coating system for workpieces with dimensions: length 6500 mm, width 1500 mm, height 2200 mm. Hodpfx Ahovdlfzjgot

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Hjdpfx Ahoun Sd Usgjt Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: new, Year of construction: 2025, SAPI Powder Coating The perfect layer for lasting protection. Powder coating is a highly effective and widely used method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resin, pigments, and additives is applied to a substrate. The powder is electrostatically charged so that it adheres evenly to the surface, forming a uniform coating. Hjdpfx Ahswf Dpgsgst To achieve optimal adhesion and durability, the substrate is first thoroughly cleaned and prepared. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for the powder to bond effectively to the substrate and achieve a strong and long-lasting coating. A powder coating system typically consists of various components and equipment required for the application and curing of powder coatings. SAPI_Powder_spray_gun Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures even powder distribution. Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. Powder Feed System The powder feed system consists of a hopper or container in which the powder coating material is stored. It typically includes equipment such as powder pumps, feed hoses, and powder screens to transport the powder from storage to the spray gun. Pretreatment Equipment Pretreatment equipment is used to prepare the substrate before the powder coating is applied. This may include processes such as cleaning, degreasing, rinsing, and surface treatment to ensure good adhesion and durability of the coating. Curing Oven A curing oven is an essential component of a powder coating system. It is used to heat the coated substrate to the correct temperature so that the powder coating can melt, flow, and cure into a durable finish. The oven typically consists of a conveyor system or racks to transport the coated parts through the oven chamber. Exhaust system An exhaust system will be installed in the facility to extract excess powder, fumes, or volatile compounds generated during the coating process. This system helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, EISENMANN Industrial Paint Complex - Complete Automotive-Grade Paint Line (New/Unused, 2008) Manufacturer: Eisenmann (Germany) - Tier-1 OEM supplier for Mercedes, MAN, Solaris, Volvo etc. Year of manufacture: 2008 Application: Full-cycle industrial painting of buses and large vehicle bodies. Components included: 1. Full Surface Preparation Line ● Pre-cleaning booth ● Degreasing, rinsing, and activation tanks ● Phosphating tank ● Rinsing tanks (8 m and 12 m) 2. Cathodic Electrocoating (KTL) ● Full-size KTL tank ● Post-KTL drying chamber 3. Sealant & Mastic Application ● Specialized PVC & underbody protection booth ● Sealant/mastic application booth 4. Primer Line (Primer 1 & Primer 2) ● Application booth ● Drying booth ● Cooling booth ● Workstations for filling, sanding, surface preparation 5. Final Paint Line Hedpozi D T Defx Ahgot ● Paint application booth ● Drying booth ● Cooling booth ● Minor defect correction booth ● Final inspection & preservation booth 6. Additional Systems ● Paint preparation room ● Wastewater treatment unit ● Transport systems ● Ventilation units ● Regenerative thermal oxidizer (RTO) Condition: new/unused, 0 working hours

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,200 mm, total height: 2,400 mm, total width: 1,700 mm, overall weight: 1,500 kg, EASY-TO-TRANSPORT ELECTRIC OVEN – NO ASSEMBLY REQUIRED!!! This system comprises an industrial electric oven with internal dimensions of 1700 × 3200 × 2100 mm, engineered to deliver consistent and reliable thermal processing for demanding applications. The key feature of this oven is that it can be transported in its assembled state, eliminating the need for on-site assembly. The oven is powered by a high-efficiency electric heating unit (2200 × 2100 × 300 mm), equipped with 3 resistance blocks (a total of 9 heating elements), providing a total installed power of 27 kW. This configuration ensures uniform heat distribution and provides sufficient energy for stable and efficient operation under continuous workloads. To optimize internal air circulation and thermal performance, the system incorporates 2 Ø350 mm impellers, driven by 2 electric motors of 1.5 kW each (2 HP). This setup guarantees enhanced airflow dynamics, contributing to homogeneous temperature distribution throughout the chamber. The oven is fully insulated using 180 mm high-density thermal panels, significantly reducing heat loss while ensuring maximum energy efficiency and complete chamber sealing. This construction supports stable operating conditions and minimizes energy consumption. Additionally, the unit is equipped with an advanced control panel featuring all essential functions and operational parameters. The interface is designed with a strong focus on user-friendliness and operational flexibility, allowing the operator to easily adjust and control the system according to specific production requirements. Why this system excels: High power output (27 kW) Hedpfx Aoyzw Ihohgjt Optimized airflow system (dual motor + impellers) Heavy-duty insulation (180 mm panels) User-friendly and fully functional control system Designed for reliability, efficiency, and industrial performance.

Year of construction: 2022, condition: new, Service – Preparation of a quotation for a powder coating system from the company Romer. Hjdpfxsfnk H Sj Ahgot Directly from the manufacturer romer-deutschland Manufacturer of powder coating systems and industrial ovens, plant engineering Delivery time approximately 10 to 16 weeks. Shipping costs will be calculated separately.

Year of construction: 2023, condition: new, Powder container with fluidization. Powder container made of stainless steel/steel. Hjdpocr U Rrofx Ahgst Universal connection to the FI20 pump. Connection to the 8mm powder hose – quick-release coupling.

Year of construction: 2022, condition: new, Model: SLS-9 Working dimensions: 1000 width x 1400 height x 1200 depth External dimensions: 1200 width x 1660 height x 1400 depth Power supply: Electric Rated power: 9 kW Voltage: 380V Frequency: 50-60Hz Door type: Single-sided, solid Hjdpfxsb Al Ako Ahget Homogeneity:

Year of construction: 2019, condition: new, Preparation of a written offer / cost estimate for a powder coating system from the company Romer. Hjdpfxoc Sd D Ss Ahgst