1
working range 200 mm
Jwczhm
daylight 200 mm
setting plane 117x50x140cm
working hight 1000 mm
3
degree 1150
Ox7i9
working heigth 200 mm
length 1000 mm
width 800 mm
depth 1400 mm
Coil Weight per Base 300 kg
Base Diameter mm
Stack height 0 mm
No. Furnace 0
No. Base 0
No. Cooling Hood 0
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
3
Short wave dryer, mobile infrared paint dryer
-Operating voltage: 220 volts
-Power: 3000 watts
39lw7kyx
-Dimensions: 1400/800/H1650 mm
-Weight: 40 kg
4
max. temperature 1.150 Grad
size of opening 350 x 250 mm
depth of chamber 750 mm
volume 66 L
control RT 100 D
voltage 380 V
total power requirement 18 kW
Bzs3owubcx
weight of the machine ca. 530 kg
dimensions of the machine ca. 1,00 x 1,70 x 1,75 m
11
Manufacturer: Fulmina Industieöfen
Type: KEW 5
Year of construction: 1994
Temperature max. 1.200 °C
Size of the opening 315 x 200 mm
Depth of the chamber 500 mm
Control TC 504 ROHDE
Volume 21 L
Operating voltage 380 V
heating capacity: 12,0 kW
E3bvanl
Machine weight approx. 300 kg
Space requirement approx. 1.1 x 0.70 x 1.20 m
2
Electric oven for powder coating, with 3 rails on top.
Divisible into 2 independent chmabers ( 6,5 m + 3,5m), which you can operate completly separately.
Inner dimensions L x H x W in mm: 10.000 x 1880 x 1000
Input: 90kW
By37g9cptb
1
working range 150 mm
Be0z0gaarn
daylight 170 mm
setting plane 330x48x127cm
working hight 1200 mm
13
Product: JSJJODEIT
Oven used in glass production for sale in mint condition.
Total current consumption: 940 A
Maximum temperature: 650 ° C
Furnace space: 1800x1700x2200 mm
Automatic door opening, closing on both sides.
Chain track width: 1275 mm
Model: R12-G004-267
Production year: 2013
Mains voltage: 400V, 50Hz, 3 ~ L1 / L2 / L3 / PEN
A00 Mains power supply: 230V / 10A
(Computer panel)
Btxqphv
Power supply control panel A01: 400V / 50A
5
Short wave dryer, mobile infrared paint dryer
-Operating voltage: 220 volts
Fnzui29
-Power: 3300 W
-Dimensions: 1000/650/H1660 mm
-Weight: 40 kg
9
Micafil Impregnation Machine
Micafil impregnating machine for impregnating and insulating anchor components with 2 K impregnating resin.
The components run through an immersion bath and are dried in a curing oven.
Dimensions: LxWxH
7,40 x 1,85 x 2,38 m
We sell a large number of paternosters.
The units are in operation until 30.06.2021.
After the purchase you will also receive the documentation
From 01.07.21 the units are ready for collection. Dismantling and transport by the buyer.
C282joe...
7
Powder coat oven for sale from the top brand Emotech.
Oven is very well insulated and can be heated up to 220 degrees. And still excellent.
Oven works on gas.
Inner dimensions: 250x120x200cm
Poze9
The oven was serviced by Emotech last year.
Oven is not in use until December. Word then replaced by a large oven.
1
furnace for R&D projects and also for continius operations
furnace was only used for one project
high precision for holding and fixing the temperature
power 32 KW
max. of temperature 1300°C
chamber measurement: BxHxD 500x750x550
2 pieces of chamber
Brj3addadb
weight: ~2000kg
every chamber with temperature sensor
1
working range 200 mm
D8ge8xh
daylight 340 mm
setting plane 3400 x 600 m
working hight 2100 mm
4
Size 5, working height 1255, special length 2800 mm.
Suitable for furnace size 4 - 6 , charge width up to 600 mm.
Special length 2800 mm, for loading double chamber furnaces
Distance between rails 2600 mm
Working height 1250 mm
2nzwkhi7m
Price ex location. On-site commissioning possible worldwide for an additional charge.
1
Model SLP-30/O
Worksize dimensions 1200 width x 1800 height x 3000 depth
Overall dimensions 1560 width x 2410 height x 3300 depth
Power supply Electric
Nominal power 27kW
Voltage 380V
Frequency 50-60Hz
Door type: one sided
Anti-Ex Schloss
Homogeneity < ± 3.0°C if 180°C
Temperature stability < ± 3.0°C
Temperature max. 230° C
Transport Ground (Rail in the floor)
Heaters Exchangeable roof heating panels
Circulation Vertical
Ventilator Radial assembled on exchangeable panel
Air flow Variable ...
4
Quenching and tempering system for Sale to self colectors
out of production since 2020
Ywtts
7
We offer - electric crucible resistance melting furnace PTV 330/11 with a pneumatically sliding lid. Manufacturer: Lac, sro Year of production: 2010 Max temperature: 1000 ° C Power input: 60 kW Crucible volume: BU 300/120 Melting power: kg.h-1 300/140 Al Rated voltage: 3 / N / PE AC 400/230 V Temperature control: PID controller located in a separate switchboard. The furnace is equipped with circuits for switching el. heating power 1/3; 2/3; 3/3. Status: 1x new - not used 1x new - 2 melts perform...
10
Manufacturer: FORNAX AS
Continuous heat treatment furnace.
Biwgocywcz
Operating temperature: 130 ° C.
Production year: 2006
Sizes:
Length: 6.2 m
width: 2,5 m
2 chambers door, size: 90 x 190 cm
heating capacity: 110 kW
72 Heating system
1
clear width 250 mm
dia. mild steel 4-27 mm
Haratxb
setting plane 30x576x445cm
output - kg/min 320
working hight 4455 mm
dimensions 5763 mm
11
Technical Details :
- Power - 90 KVA
- Energy - electricity
- Capacity - 1000 kg / 8h
- Oil capacity - 2.000 ( hardening oil )
- Screw range - up to 300 mm
- Max. temp. - 1200 C
Nfaiergv
5
Air circulation oil / gas chamber furnace model SOS 80 O
Exhibition machine
Mmg2p
Technical data:
Usable space dimensions:
Width approx. 1200 mm Height approx.: 1800 mm Depth approx.: 3000 mm
trolley on request
material
Housing inside: Sheet steel 0,8 mm FAL welded or riveted tightly
Outside housing: sheet steel 0.8 mm Base plate sheet steel 1.5 mm
Painting: RAL 1013, as standard, powder coated
Insulation material: Mineral wool
Insulation thickness: walls - 160 mm ceiling: up to 240 mm, 100 kg/m...
5
Oven Wild Barfield
Temperature max: 650°C
Dimensions:
Lxz8l
Interior (BxH): Ø 260 x 700 mm
Exterior (BxH): Ø 700 x 1.400 mm
Power: 380 Volt/8 kW
Machine weight: 300 kg
3
Article number: MA1020
Manufacturer: Naber
Art: 45 S
Year: 1966
Machines-Nr.: 6498
Taxes: Naberterm
8yyqvsy
Length [mm]: 1000
Width [mm]: 750
Height [mm]: 700
Weight (kg]: CA. 120)
Rated power: 380V / 6 KW
Table size LxW: Internal dimensions: 230 X 230 X depth 300 mm
6
Using Ready wet paint plant
Jqka7xbd
1
working range 200 mm
daylight 12 cm
setting plane 150x50x113
Cbb2zdfj
working hight 103 cm
9
Enamel (metal) furnace line!
capacity - 11,000 flue pipes in 24h
the ability to enamel and other metal objects!
The dimension of the furnace in the part where the heat treatment is 500 mm
Bfs79josil
Power - 400 kw - Electricity
the line consists of:
- Grinding mills (3 pieces)
- enamel maintenance mixers (2 pieces)
- chain conveyor
- heat treatment furnace
- el.cabinet
5
Convection baking oven
Powder furnace new SLS - 90 / O * D + t
Transit oven divisible
Memorized 1400 wide x 2000 height x 6500 depth
Dimensions 1920 wide x 2810 height x 6800 depth
Electric power supply
Rated power 90 kW
Voltage 380V
Frequency 50-60 Hz
Door type: 2 doors on either side - passage oven
Anti-ex Castle
Warm-up time 15-30 min. (180 ° C)
Homogeneity < ± 3 ° C, if 180 ° C
Max < ± 3 ° C
Temperature of 230 ° C Max
Transport: selectable
Air circulation fan
Heaters removable roof h...
3
Oven Wild Barfield
Temperature max: 500°C
Dimensions:
Intertior (WxDxH): 470 x 440 x 400 mm
Exterior (WxDxH): 850 x 600 x 730 mm
Vbudcyjki
Connection: 380 Volt
7
7" Touchpad
Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events
You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power
Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost ...
5
Furnace was in operation for about 2 years, then unfortunately the project ended prematurely and we did not find any use for it
Owo2b
1
working range 200 mm
Pfofp
daylight 12 cm
setting plane 125x50x110
working hight 102 cm
1
Product description:
Aluminum Billet / Billet Heating Furnaces are used in the pre-heating process before extrusion.
These furnaces are directly gas heated and have premixed jet type nozzle burners controlled by PLC.
Thanks to the special arrangement of the burners, it is ensured that the billets are heated in a conical manner with low gas consumption in a short time.
Temperature measurement is made at measurement ranges determined by surface thermocouples that directly contact the billet / bill...
5
Convection baking oven
CGN gas oven
Powder furnace new SGS - 800 / O GEMA OptiFlex
Width 2500 mm height 2500 mm depth 12500 mm
Yxe8rhnrt
direct from the manufacturer.
More information under
Romer Germany
3
Oven Wild Barfield
Ehuy23of
Temperature max: 500°C
Dimensions:
Intertior (WxDxH): 470 x 440 x 400 mm
Exterior (WxDxH): 850 x 600 x 730 mm
Connection: 380 Volt
5
7" Touchpad
Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events
You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power
Ysuimk
Consumption is calculated based on the settings of the burner. This feature will allow you to estimate th...
9
Item type: SR 150 1000/3
Data:
400V mains connection / 32A
Max. Temp. 1100 ° C
Length of combustion chamber 1000mm
Zones 3x
Iuxfmwwza
Condition: used
Scope of delivery:
1x Carbolite Gero SR150 1000/3 tube furnace + Carbolite control
Invoice including selected 19% VAT.
3x pieces in our stock
Customs notice: When shipping to non-EU countries, additional taxes or costs (e.g. customs duties) are incurred in the context of your order, which are not paid by us or billed by us, but by you direct...
6
Manufacturer: Koyo model: VF-1000 label: vertical furnace for: 300mm wafer function: diffusion mini batch for max 25 wafer operation: manual year: June 2001inkl. accessories
Jurtm3
5
Product description:
Our furnaces are designed to achieve high efficiency at low operating costs as a result of engineering studies and years of experience.
We have many models that can work with different fuels and operation styles in different types and models depending on the system it will operate.
In addition to our standard production criteria, we do special design studies in line with the demands of our customers.
Our furnaces are manufactured in accordance with European standards on safe...
15
Applied Materials AMAT Baccini Ofen, MAC001000018
Model: MAC001000018
YoM: 2011
Volatile Organic Compound VOC:
Type: 850 Volatile Organic Compound
Consumption maximum: 250 N m3/h
Consumption average: 150 N m3/h
System Inlet-/Outlet-Temperature: 170 °C
Bufu8a3nny
Compressed dry air CDA:
Type: 310 Compressed dry Air
Consumption maximum: 36 N m3/h
Consumption average: 0 N m3/h
System Inlet-/Outlet-Temperature: 20 °C +-2
Industrial Waste Water:
Type: 908 Industrial Waste Water
Consumption maxim...
6
Gravity - rims - oven (without fan)
Model SLS - 18/27
1-27 kW (stepless power control)
* Now available - June/July 2017
Inside BHL: 1200 x 1800 x 2500, outdoor: 1400 B x 2160 H x 2700 T
Insulation thickness: 80 mm, warm-up time 15-40 minutes up to 180 ° c.
Max temperature 230 ° C
Type of air distribution gravity
Volume 5400 L
Transport: Horde cart gravitational heating system low operating costs, trouble-free
Explosion-proof locks comply with PN-EN
2eg8a8mqc
Automatic control
Changes and
Er...
5
7" Touchpad
Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events
You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power
Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost ...
11
Product description:
Our furnaces are designed to achieve high efficiency at low operating costs as a result of engineering studies and years of experience.
We have many models that can work with different fuels and operation styles in different types and models depending on the system in which it will operate.
In addition to our standard production criteria, we do special design studies in line with the demands of our customers.
Oxkq9
Our furnaces are manufactured in accordance with European...
9
These are curing ovens for wet paint or electrostatic powder coating used in automatic systems.
This type of oven continuously operates.
It can be designed in various sizes to benefit from the place more efficiently.
Loss of heat is prevented through air curtains which are located on its entry and exit and special designed air breakers.
It can be designed as gas-operated, diesel fuel-operated or electric-operated.
Indirect heating system provides to keep occupational safety and curing quality at...
3
These are curing ovens for wet paint or electrostatic powder coating used in automatic systems.
This type of oven continuously operates.
It can be designed as gas-operated, diesel fuel-operated or electric-operated.
It is installed on a high chassis mounted to the floor in order to benefit from the place more efficiently and bottom section is suitable for various use.
An indirect heating system provides to keep occupational safety and curing quality at a high level.
Our modular designed ovens a...
7
These are curing ovens for wet paint or electrostatic powder coating used in semi-automatic systems.
The conveyor system placed on the oven operates step by step.
The conveyor consists of 3 stations (Loading, Baking, Unloading) and automatically stops at every station.
The oven doors are designed as combined and sliding and when a door is opened, the other door is opened equally.
The oven doors can be designed as electric motor-operated or air-operated.
It ensures homogeneous air distribution ...
Used Furnaces
Completely search Machineseeker and more than 200,000 used machines now.This may be of interest to you
Machineseeker still biggest sponsors of 2nd German football league
Olympic Games: Machineseeker sponsors Team Germany
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
10 valuable tricks for buying used machines online
Sample sales contract for used machines in nine languages
