Condition: good (used), mobile workbench, folding workbench, work table, assembly bench -mobile workbench: solid design -Width: 1240mm Dusb Encnsq Nqxpjhst -Depth: 800mm -Height: 840mm -Weight: 56 kg

Condition: good (used), Year of construction: 2005, Gildemeister CTX 210 V3 Year of manufacture 2005 Machine number 0145000132A Fanuc control Maximum turning length: 300 mm Max. turning diameter: 200 mm Spindle bore: 45 mm Turning diameter over bed: 380 mm Main spindle speed range 6000 rpm Main electronic connection: 400 V / 50 Hz Total power requirement: 21 kVA Dimensions LxWxH 2885 x 1720 x 1670 mm Weight approx. 4200 kg Travel paths: X-axis 165 mm Z-axis 340 mm Equipment: - Driven tools - Tool holder VDI30 - Part catcher - Tailstock - Chip conveyor Dob Encjvt S H Dsnheut - 12 Turret positions The machine was in operation until recently and is fully functional. Price net, free loading from warehouse

Condition: used, Year of construction: 2006, total height: 1,800 mm, total width: 800 mm, total length: 1,300 mm, Empty weight: 650 kg Price: On request - Year: 2006 - Documentation available: No - Serial number: 764187 Dujb Encnewg Ahwjhot - Transport dimensions: 1300mm x 800mm x 1800mm (l x w x h) - Transport weight [kg]: 650kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: not inspected (used), Year of construction: 1999, Functionality: limited functionality, We sell EDM Sodick Matra (submersible). Year 1999. Fully functional. In production until June 2025. Dob Encnswh Upvohjut

Condition: used, Year of construction: 2008, grinding diameter 300 mm grinding length 800 mm centre height 150 mm Control Fanuc 21iT GAP Control Dusb Eovk Nk Usncnhst Exhauster Filtration with paper and magnetic separator

Year of construction: 2013, Condition: good (used), Center Height - 800 Swing over Bed -1580 Swing over Cross Slide -1140 Width of Bed - 800 Distance Between Centers - 4000 Rapid Travel Speed (Z / X) - 5/5 Z-axis Travel, Max - 1750-9750 X-axis Travel, Max - 800 Z-axis Ball Screw - Ø80* X-axis Ball Screw - Ø50 Dueb Encnjvvqhxohot Quill Diameter - Ø200 Quill Taper - MT7 Quill Travel - 300

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, granite measuring plate, hard stone measuring plate, granite measuring plate -Manufacturer: Planolith, granite measuring plate hard stone measuring plate Size: 2000 x 1500 mm -Accuracy level: O (< 0.012 mm) -T-slot: width 14 mm -Dimensions: 2020/1520/H256 mm -Weight: 2360 kg Duob Enceub D Rlenhst

Condition: ready for operation (used), Year of construction: 1984, operating hours: 40,000 h, Functionality: fully functional, machine/vehicle number: No.315, No.316, No.317, No.327, grinding width: 100 mm, grinding length: 250 mm, table length: 400 mm, grinding height: 130 mm, table width: 225 mm, grinding spindle speed: 3,300 rpm, Equipment: rotational speed infinitely variable, For sale are 4 (four) sets of optical profile grinding machines Wasino type GLS-130AS, with CNC Fanuc, made in Japan in 1984. 3 machines are in full working condition, there are videos of spindle runout and positioning X,Y accuracy measurements. Fourth machine serial No.327 is the same working condition, just factory old worker could not start it up for us, was working more then 1 year ago. There are a lot of accessories, tools, spare parts, technical documentation, and a set of spare CNC Fanuc electronic boards for each machine. For a package of 4 sets of Wasino machines, the price is 70,000 euros EXW stock. Also for sale for additional price are 5 pieces of absolutely new grinding spindles NSK for Wasino, in original Japanese factory packing, and 4 pieces of absolutely new CNC Fanuc monitors Matsushita. Tel. +380508277867 WhatsApp/Telegram Dusb Enewh Udtscnhjt

Condition: ready for operation (used), Year of construction: 1997, Functionality: fully functional, Used CNC traveling column milling machine Make: ANAYAK Type: HVM 6000 Duob Enjwg Aatecnhet Year of manufacture: 1997 Control: CNC TNC426 Travel: X=5300 / Y=1200 / Z=2000 Tool magazine: 60 pcs Automatic head: B & C 2.5 indexed Table: 6000 x 1000 mm Speed: 3000 rpm

Condition: good (used), Year of construction: 2002, Functionality: fully functional, We sell two identical pieces Hurco VMX24, Ultimax 4, Year 2002. In production until June 2025. Dueb Encswh Umuenhot

Condition: used, Year of construction: 2005, grinding diameter 300 mm grinding length 800 mm centre height 150 mm Dueb Encnovk Nkzehjt weight of the machine ca. 3,5 t Steuerung Fanuc 21iT GAP Control Exhauster Filtration with paper and magnetic separator

Condition: new, Technical data: Capacity: 100 t Installation height: 1010 mm working area, max.: 1010 x 300 mm piston stroke: 400 mm forward speed: 7,12 mm/s return speed: 13,42 mm/s motor power: 4 kW width: 1600 mm depth: 850 mm height: 2450 mm Weight, approx.: 1000 kg Dueb Enjk Nz N Escnhjt Equipment: - Laterally movable cylinder - Generous working area - Height adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump

Condition: good (used), Year of construction: 1990, Tapping machine, pipe thread cutter Dujb Eeficzkoncnhjt -for: pipe size max. 2 inches -Speed: rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 V -Mechanics for: cutting jaws missing -Dimensions: 1100/700/H1130 mm -Weight: 132 kg

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, turning diameter over cross slide: 465 mm, turning length: 600 mm, turning diameter: 400 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 267 mm, travel distance Z-axis: 600 mm, CNC Siemens 840D WORKING RANGE Swing diameter, max.: mm 650 Swing diameter above cross guide: mm 465 Turning diameter, max.: mm 400 Cross travel (X): mm 267.5 Duobswh Ucio Encnhst Longitudinal travel (Z): mm 600 MAIN SPINDLE Spindle head (flat flange): mm 170h5 Bar passage: mm 65 Spindle diameter in front bearing: mm 130 Self-centering: mm 250 Speed ​​range, max.: rpm 4,000 TOOL HOLDERS Number of tool stations: 12 Of which driven: 12 Shank diameter (according to DIN 69880): mm 40 Power (40% ED) at 4,000 rpm: kW 4.2 Torque, max. (40% ED): Nm 20 Number of revolutions, max.: rpm 4,000 TAILSTOCK Tailstock stroke (automatically movable): mm 500 Tip attachment: CM5 Tailstock force, max.: daN 800 Machine weight with chip conveyor: kg 5,800 Year of construction: 2014 Machine complete with: • Tool presetting • Autoblock 3-jaw self-centering chuck diam. 250 mm • No. 02 axial motorized modules • No. 02 radial motorized modules

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, Used CNC table-type boring and milling machine Make: UNION Type: BFT130/7 Year of manufacture: 1989 Dob Encnewgz Uvjhjut Control: Heidenhain TNC355 Travel: X=2800 / Y=2000 / Z=1500 / W=800 Spindle: 130mm Tool: SK50, DIN 20280

Condition: good (used), Display diameter 300 mm Rotating 360° Measuring range 250 x 125 mm Cross table 520 x 280 mm Duob Encjhz D Rgenhjt MARCELS MASCHINEN AG

Condition: used, Year of construction: 2002, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm Machine is checked and serviced before delivery. Table geometry is newly created according to Kellenberger measuring protocol. Fotos of a delivered machine Partial painting Equipment: CNC control KELCO 120 -Full B-axis C-axis for non-circular grinding -Internal grinding device diameter 120 mm for HF spindles Operating unit for MFV and MFZ spindles -Grinding wheel equipment left 500x80x203.2 mm -Grinding disc equipment right for discs 400x63x127 mm -Workpiece headstock MK5/short taper DIN55026 -Sinusoidal ruler for direct angle adjustment medium final dimensions Duobsvx Dvbe Encnhst -Coolant supply through the workpiece spindle -Tool measurement-Kel-Set -Active longitudinal positioning Movomatic Kel-Pos -Cut-off sensor Movomatic -Hydraulic quill retraction Micro-adjustment on the tailstock -Pneumatic relief for the tailstock -Hydraulic quill retraction for the tailstock -Coolant tank on request -Set of vibration-damping pads Data as delivered new. No guarantee for completeness

Condition: new, Technical data: Capacity: 160 t Installation height: 1100 mm working area, max.: 1100 x 350 mm piston stroke: 400 mm forward speed: 6,2 mm/s return speed: 6,8 mm/s motor power: 5,5 kW width: 1640 mm depth: 1000 mm height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally displaceable cylinder via rack, pinion and handwheel - Generous working area Duebek Nz Nte Encnhjt - Height adjustable table - Torsion-resistant design with welded steel - Pressure gauge - Fine pressure adjustment - Additional hand pump

Condition: ready for operation (used), Year of construction: 2008, operating hours: 13,290 h, Functionality: fully functional, machine/vehicle number: S2AW3901, turning length: 320 mm, turning diameter over cross slide: 325 mm, turning diameter: 114 mm, spindle motor power: 6,500 W, spindle speed (min.): 1 rpm, spindle speed (max.): 8,000 rpm, spindle bore: 25 mm, travel distance X-axis: 100 mm, travel distance Y-axis: 35 mm, travel distance Z-axis: 320 mm, tool mount: 16 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 6,000 rpm, rotational speed (min.): 1 rpm, type of input current: three-phase, bar passage: 25 mm, swing diameter over bed slide: 325 mm, overall weight: 2,100 kg, Equipment: documentation/manual, rotational speed infinitely variable, EMCO MAXXTURN 25 SMY(2008) with FMB turbo 2-20/ 3200 "A" bar loader(2010) With Y-axis, sub spindle, part ejector and parts catcher for complete automatic production of complex small turned and milled parts. Control: Siemens sinumerik 810D powerline with shopturn conversational programing. Extremely easy to set up and program. Work area Swing over bed Ø 325 mm Swing over cross slide Ø 150 mm Main spindle / counter spindle distance 485 mm Maximum turning diameter Ø 114 mm Maximum part length 315 mm Maximum bar diameter Ø 25,4 mm Travel Travel in X 100 mm Travel in Z 320 mm Travel in Y +20 / –15 mm Travel in in Z2 350 mm Main spindle Speed range 0 – 8000 rpm Torque at spindle 30 Nm Spindle nose Ø 70 h5 Spindle bearing Ø 60 mm Spindle bore hole Ø 33 mm Counter spindle Speed range 0 – 8000 rpm Torque at spindle 20 Nm Spindle nose Ø 70 h5 Dujb Encnswh T Tajhet Spindle bearing Ø 45 mm C-axis Resolution 0,001° Rapid motion speed (Siemens) 1000 rpm Spindle indexing 0,01° Drive power Main spindle 6,5 kW Counter spindle 3,5 kW Tool turret Number of tool positions 12 Number of indexing positions 36 VDI shaft (DIN 69880) VDI16 Tool cross-section for square tools 12 x 12 mm Shaft diameter for boring bars 16 mm Turret indexing time 0,2 sec Driven tools Speed range 0 – 6000 rpm Maximum torque 4 Nm Maximum drive power 1,2 kW Number of driven tools 6 Feed drives Rapid motion speed X / Y / Z 20 / 10 / 30 m/min Feed force in the X / Y / Z axis 3000 / 4000 / 4000 N Positioning spread according to VDI 3441 in X / Y / Z 3,5 / 3 / 4 µm Coolant system Tank volume 140 liters Standard pump power 0,57 (2,2) kW Pump capacity at 3,5 bar / 1 bar 15 / 65 l/min Power consumption Connected load 12 kVA Compressed air 6 bar Dimensions and weight Height of spindle center above floor 1140 mm Total machine height 1870 mm Foot print (without chip conveyor) LxD 2180 x 1425 mm Total weight 2100kg Machine is in great condition, holding micron tolerances all day and comes fully equipped with tooling and clamping units. Additional equipment: Röhm Collet chuck 148E with set of collets on main and sub spindle. Additional collet chuck 5C with full set of collets for sub spindle. 2 coolant pumps with trough spindle coolant on sub spindle. All the tooling, inserts, holders, collets and measuring equipment in the pictures are included with the machine! 3 sets of sleeves for FMB turbo 2-20 bar feeder. All machine documentation is present. Machine was serviced by certified EMCO technicians. Machine is under power and in production until sold. Can be checked and tested with prior arrangements.

Condition: excellent (used), Year of construction: 2010, mitsubishi EA8 cnc zinc spark machine year of construction 2010 c-axis 4-fold changer x,y,z 300 x 250 x 250 mm generator 60 A max. workpiece weight 550 kg Dsb Ejwh T Nuencnhsut max. electrode weight 25 kg chiller hirschmann mount fire extinguishing system magnet on the table documentation and diskettes machine is connected for inspection

Condition: used, Functionality: fully functional, throat depth: 175 mm, spindle speed (max.): 1,280 rpm, spindle speed (min.): 77 rpm, drilling capacity: 32 mm, column diameter: 175 mm, drilling stroke: 200 mm, spindle mount: MK 4, drilling depth: 200 mm, table width: 530 mm, table length: 450 mm, rotational speed (min.): 77 rpm, Column Drilling Machine Inv. No. Manufacturer: Erlo Type TCA 32 * Drilling capacity in steel: 32 mm * Spindle mount: MT 4 * Throat depth: 360 mm * Drilling stroke: 200 mm * Table: 530 x 450 mm * Column diameter: 175 mm * Speed: 77 - 1280 rpm * Automatic feeds * Left/right rotation Djb Encowh T Iqenheut * Coolant system * Machine light * Tool ejector * Protective cover * Total power requirement: 1.5 kW * Machine weight: approx. 450 kg In very good condition!

Condition: good (used), Basket LxWxD 300 x 210 x 460 mm 150-500 Degrees Dsb Eohz D Iwsncnhout MARCELS MASCHINEN AG

Condition: new, The machines of the NeoSpark CNC series are among the most precise wire EDM machines with reciprocal wire guidance on the market. They offer excellent performance when machining electrically conductive materials in mold and tool making. The NeoSpark series is a popular choice for companies that specialize in additive manufacturing and want to separate the finished part from its base plate with high precision. High speed ​​wire cutting guarantees deformation-free and burr-free cutting of even the most delicate 3-D printed metal structures with the best surface quality Duobouyh Uzj Encnhst

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. Djbjilk H Te Encnheut - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: excellent (used), Grinding range 600 x 460 mm Wheel diameter 250 mm Magnetic plate 500 x 250 mm Misc.accessories MARCELS MASCHINEN CH Dueb Ejmmdhroncnhet