Condition: excellent (used), Year of construction: 1991, Haco hydraulic shear Model PSX 3010 Year : 1991 Capacity : 3020 x 10 mm. Power back gauge Dob Etjwh R Als Sw Eeut Sheet support

Condition: ready for operation (used), Year of construction: 2016, - USED - 5-AXIS HORIZONTAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1050 mm Y-AXIS TRAVEL: 920 mm Z-AXIS TRAVEL: 960 mm RAPID FEEDS X-Y-Z: 60 - 60 - 50 m/min Duobsvuclms Et Sw Eot SPINDLE: 10000 rpm; 26-30 kW; 700 Nm A-AXIS: -120°  +30 ° TABLE SIZE: 630x630 mm MAX ADMITTED LOAD: 780 Kg MAX MACHINABLE PIECE DIMENSIONS: ø 1.000 X H 770 mm HIGH PRESSURE COOLANT: 70 Bar TOOL MAGAZINE: CHAIN-TYPE ; 240 POS MAX TOOL DIAMETER: 110 (320) mm MAX TOOL LENGHT: 600 mm MAX TOOL WEIGHT: 20 Kg CONTROL UNIT: MATSUURA G-TECH 30i OVERALL DIMENSIONS: 6015 x 3415 x 3500 mm ACCESSORIES: FUME EXHAUSTER ; SWARF CONVEYOR ; LASER TOOL SETTER ; PORTABLE HANDWHEEL ; LINEAR SCALES NOTE: LUBRIFICAZIONE MANDRINO CON SISTEMA ARIA-OLIO; CONVOGLIATORE CON ROTOFILTRO.

Condition: used, Year of construction: 2016, Functionality: fully functional, track width: 4,000 mm, working range: 3,000 mm, working width: 3,000 mm, total width: 4,960 mm, total length: 8,400 mm, table length: 6,600 mm, working length: 6,000 mm, table width: 3,200 mm, material thickness: 80 mm, year of last overhaul: 2024, sheet thickness steel (max.): 80 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,000 mm, worktable width: 3,000 mm, height adjustment type: electric, exhaust gas cleaning: Kemper PlasmaFil Compact, Equipment: documentation/manual, Hello, I am selling a Sato plasma cutting system with a Kjellberg Smart Focus cutting source including a Kemper filter. The system is fully functional and can be tested on-site. Dismantling should be carried out by the buyer. Cranes in the hall are available for use. Sato plasma system including 3x6m cutting table Plasma system is equipped with a laser pointer for sheet metal setup (sheet metal position determination and sheet metal position compensation) 8m heavy-duty machine track with HEB300 and milled S49 rails High-precision linear guide with servo motor and integrated CAN bus controller as a controlled Z-axis Stroke 215mm Speed 70mm/sec Dob Et Swewh Rtke Esut Feed speed 12,000mm-20,000mm/min Kjellberg Smart Focus 300 plasma power source with PerCut4000 quick-change head Many spare parts/wear parts are still available and can be sold optionally. Automatic gas control with Kjellberg PGV-300 Macro programming on the plasma 96 macros 8m chain chute for energy chain The filter system was replaced with a Kemper system in 2019. KEMPER PlasmaFil Compact - Weatherproof version - Frequency converter Type 31 0650 Extraction capacity 4,500-6,500 m³/h Negative pressure 1,900-2,500 Pa Filter area 100 m² Motor power 7.5 kW Voltage 3 x 400 V 50 Hz Dimensions 1830 x 1830 x 3800 mm

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 306 431, type of input current: three-phase, total height: 2,165 mm, total width: 1,800 mm, total length: 3,000 mm, overall weight: 1,250 kg, input voltage: 400 V, type of cooling: air, Equipment: cabin, Machine year 2021, bought used December 2022, checked / repaired / adjusted by specialist company in April 2023. Only run for a few hours in trial operation since then. Djb Etoulw E Ss Sw Ejut

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling method used on the deep hole drilling machine is drilling with a single-lip drill. Drilling unit information: - Drilling depth: 200 mm - Min/max drilling diameter: 1-12 mm based on ST 60 - Number of spindles: 2 - Spindle spacing: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Continuously variable spindle speed: 1000-20000 rpm - Continuously variable feed: 10-25000 mm/min - Rapid traverse: 25000 mm/min - Slide stroke (nominal): 650 mm - Slide width: 460 mm - Slide stroke X-axis: 200 mm, rapid traverse: 25000 mm/min - Slide stroke Y-axis: 200 mm, rapid traverse: 25000 mm/min Fluid information: - Coolant supply: Deep drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter capacity: 50 l/min - 1x control filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with circulation pump - 1x electrostatic oil mist extraction system - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote control: Flow rate: 1-38 l/min Pump drive: 7.5 kW Spindle unit: - Motor spindles with frequency-controlled, stepless speed control. - Spindle head with tool holder connection. - 2 x tool holders for adjusting sleeves according to VDI 3208 SE10x60, firmly screwed to the spindle head of the motor spindle. Drill bushing carrier: - The drill bushing carrier can be positioned via the NC axis. - Cast-iron version mounted on the linear guide. - Drive for the W-axis via AC servo motor and ball screw with indirect, absolute position measuring system. Dujb Etewh Rp Ej Sw Eet Workpiece slide: - The workpiece slide is designed as a cross slide for vertical and horizontal positioning of the workpiece, for attaching clamping plates or special clamping devices. - The base body is cast-iron version with linear roller guides. - Drive for the X and Y axes via AC servo motors and ball screw. - Direct, absolute position measuring systems. Table top with clamping or alignment groove. Clamping table with NC dividing head for positioning: - With rotary axis and swivel axis. - With hydraulic clamping in the rotary axis and swivel axis. Technical specifications: - Swivel range: 270º - Rotation range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: Rotary axis ± 15" / Swivel axis ± 30" Electrical equipment information: - 1x drilling process monitoring system - 1x CNC control 840D (Solution Line) Connection data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW Additional machine equipment: - 2 x holders for spring-loaded drill bushing holders, located on the drill bushing carrier. - Up to max. drill diameter 18 mm.

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 2,800 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 2,400 mm, rapid traverse X-axis: 45 m/min, rapid traverse Y-axis: 45 m/min, rapid traverse Z-axis: 45 m/min, controller manufacturer: SIEMENS, controller model: 840D, table width: 1,600 mm, table length: 1,400 mm, table load: 7,000 kg, spindle speed (max.): 5,000 rpm, number of slots in tool magazine: 450, Horizontal machining center Multi-pallet TABLE Pallet dimensions: 1600x1400 mm No. pallets: 4 nr. Duobowh Rpxj Et Sw Est Table rotation: Continua gradi TURNING CAPACITY Longitudinal X-travel: 2800 mm Vertical y-travel: 2200 mm Cross z-travel: 2400 mm Rapid feedrates: 45 mt./min. SPINDLE Spindle nose: HSK100/A ISO Spindle speed: 5000 giri/min. Motor power: 60 Kw TOOL MAGAZINE Tools holder: 450 nr. Accessories: Table load capacity 7000 kg, Contimous table, Renishaw piece measurer, Tool laser control.

Condition: new, Year of construction: 2024, Single head sawing machine for aluminium FOM INDUSTIRE PANDA 300 ECHO with measuring system DIGISTOP 4m, measuring caliber DIGIBAR 3,3m and inlet conveyor PORTER 4,2m Machine in stock Configuration: Single head saw with up-feed blade Ø 300 mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO: - Tungsten carbide saw blade Ø 300 mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes Electronic measuring system DIGISTOP 4m: - Min. cutting length 0 mm, maximum 4000 mm - Friendly software using icons and function keys - Accuracy 0.1 mm - Manual piece execution - Measurement list editor - Editor of measurement received by radio or net - Removal of piece after every cut - Visualization of reference for each measurement - Roller width 200 mm Wireless electronic measuring bar DIGIBAR 3,3m - Minimum measure 140 mm - Maximum measure (without extension) 1600 mm - Maximum measure (with extension) 3300 mm - In set includes two extensions: 1400 mm and 1700 mm - Accuracy 0.1 mm - Weight 2190 gr - Power supply 4 recharg. batt. AAA - Absolute measuring system (no recalibration required) - 2 LCD lines 16 characters - Industrial keyboard 6 keys protected Dueb Etewh Rlgj Sw Ejt - 2 LED signal for immediate display of the state of instrument - Ergonomic Handle with a simple use button for measurement capture Inlet roller conveyor PORTER 4,2 m: - Loading capacity Kg. 10 per meter - Plastic rollers, width 200 mm - Vertical plastic rollers

Condition: used, Year of construction: 2006, Pressure 35 Ton Edge length 1200 mm Djbjwh Rm Do Et Sw Esut Steered axes Y1,Y2,X axis Control Elgo P8822

Condition: good (used), Year of construction: 1988, Functionality: fully functional, Machine specifications: - Wet grinding unit (pump missing) - Swivel range (grinding arm) approx. 180° - Magnetic clamping plate 250 mm x 150 mm - Max. grinding length approx. 350 mm - Max. grinding width 150 mm - Max. installation height with / without magnet 150 mm / 210 mm - Grinding wheel diameter approx. 200 mm - Grinding wheel speed 2800 rpm - Drive 400 V / 1.85 kW - Space requirement approx. W 1000 x H 1600 x D 700 mm Deb Et Sjqxac Ejw Eeut - Weight approx. 350 kg Without abrasives

Condition: ready for operation (used), Year of construction: 2004, Available immediately from location: CNC table-type boring and milling machine TOS Varnsdorf Type WHMQ 13 CNC Year of manufacture 2004 Heidelberg TNC 430 60-station tool changer Table 1800 x 2500 mm Table load 12.5 t SK 50 chuck Spindle speeds up to 3000 rpm Spindle diameter 130 mm Travel X/Y/Z/W 3500/2500/1250/800 mm Angle milling head Dueb Et Swjwh Rixj Ejt Clamping angle Many tools Weight 34 t Price €98,000 plus VAT, ex-location, ex-foundation

Condition: good (used), Year of construction: 1986, machine/vehicle number: 26 692, MÖSSNER REKORD Band Saw - Type SM420 (389) Version B Duebowh Rh Us Et Sw Ejt Roll diameter: 420 mm // Thrust height: approx. 265 mm // Thrust width: approx. 410 mm // Saw blade length: min./max. 3150-3260 mm // Saw blade width: min./max. 3-16 mm // File band length: 3150 mm // Table size: 600 x 600 mm // Table tilt right/left: approx. 30/15° // Number of cutting speeds: 8 // Motor power (pole-changing): 1.1/1.7 kW // Machine height: 1850 mm // Space requirement: approx. 980 x 870 mm // Table height: approx. 1020 mm // Net weight: approx. 560 kg //

Condition: good (used), Year of construction: 2001, spindle speed (max.): 12,000 rpm, travel distance Y-axis: 400 mm, rapid traverse X-axis: 300 m/min, rapid traverse Z-axis: 425 m/min, Chiron machining center type FZ 15 W high speed with chip conveyor year 2001 with turntable 12,000 rpm internal cooling. X 300 Y400 Z 425 Duob Eovtca Uot Sw Ejt 2 pcs available more pictures can be sent

Condition: good (used), Year of construction: 2020, Functionality: fully functional, travel distance X-axis: 640 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 680 mm, controller manufacturer: Fanuc, controller model: OiMF, total width: 500 mm, table length: 500 mm, spindle speed (min.): 40 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Horizontal machining center Pallet changer. TABLE Pallet dimensions: 500x500 mm No. pallets: 2 nr. Table rotation: 0,001 gradi TURNING CAPACITY Longitudinal X-travel: 640 mm Vertical y-travel: 610 mm Cross z-travel: 680 mm Djb Et Sowh Rfgjw Eeut Rapid feedrates: 20/60 mt./min. SPINDLE Spindle nose: BBT40 ISO Spindle speed: 40-15.000 giri/min. Motor power: 18.5/22 Kw TOOL MAGAZINE Tools holder: 60 nr. ACESSORIES: BLUM laser tool presetting system for tool length, radius, presence, and wear detection. The transmitter and receiver are separate units mounted on dedicated supports. Fagor optical scales.

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 66305, back gauge travel distance Z-axis: 800 mm, back gauge: 800 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness (max.): 10 mm, cutting length (max.): 3,000 mm, total width: 3,800 mm, total height: 1,900 mm, total length: 2,700 mm, overall weight: 5,000 kg, lateral stop: 1,000 mm, throat depth: 1,000 mm, table width: 3,250 mm, type of input current: three-phase, cutting width (max.): 3,050 mm, working width: 3,050 mm, sheet width: 3,000 mm, worktable length: 1,000 mm, worktable width: 3,200 mm, space requirement width: 3,800 mm, input voltage: 400 V, Equipment: finger protection, Selling guillotine shears from HACO Dsb Etswh N Ugj Sw Ejut In stock

Condition: good (used), Year of construction: 2003, machine/vehicle number: 0612, spindle motor power: 2,200 W, turning length: 85 mm, turning diameter over cross slide: 16 mm, spindle speed (max.): 9,000 rpm, turning diameter: 16 mm, overall weight: 1,700 kg, - 6-axis long lathe - with bar loading magazine/ - Number of tools - Driven tool stations - Rear side device - Max. clamping diameter - Max. part length - Spindle speed - Spindle drive - Max. drilling capacity - Max. thread cutting capacity - Equipment: - C-axis - Lighting - Hydraulic unit - Coolant system - Compressed air system - Central lubrication - Door monitoring - 4-spindle drilling app. Djbewh N Dns Et Sw Eout

Condition: ready for operation (used), Year of construction: 2000, Available immediately from location: CNC machining center Mikron Type VCP 710 Year of manufacture 2000 Dob Et Swswh Rb Ij Ejut Heidenhain TNC 426 Table 1080 x 580 mm Travel X/Y/Z 710/500/500 mm SK 40 30-station tool changer Internal coolant supply 40 bar Speeds up to 10,000 rpm Drive 20 kW Weight 8 tons Price ex location: €6,750 plus VAT

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 210508, Cutting Machine MG (403) Model: TL-600-A Dob Et Sswh N D Iow Eeut Serial Number: 210508 Year of Manufacture: 2021 Semi-automatic machine for cutting aluminum and PVC, including feeder. Three-phase motor: 4 HP 220/380V. Motor speed: 3000 RPM. Motor shaft diameter: 30 mm. Cutting disc: 600 x 50 x 4.5 mm; 132. Cutting speed: 55 m/s. Swivel range in degrees: 90° right - 60° left. Pneumatic working pressure: 7 atm. Pneumatic clamping cylinders: 2 vertical + 2 horizontal. Lubrication system: Pneumatic via sprayer. Dimensions: 1300 x 1220 x 1635. Weight: 500 kg. See pictures for condition and details.

Condition: used, Year of construction: 1998, cutting capacity: 600 mm, cutting range round at 90°: 600 mm, Used bianco semi-automatic hydraulic column-guided bandsaw can cut at an angle to both sides Saws Ø 600MM straight across square 600x600 rectangular 1000x600 Dusb Etova Dk Uo Sw Eet new blade guides refurbished hydraulic pump

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 42,000 rpm, MIKRON HSM 400 U high speed machining center 1. TECHNICAL DATA Working area Deb Et Sjwh Nxrsw Eeut X axis: 400 mm Y axis: 450 mm Z-axis: 350 mm B-axis: +-110 ° C axis: 360 ° Working spindle Speed range: 100 - 42`000 rpm tool holder: HSK E 40 spindle power at 40 % ED: 13 spindle power at 100 % ED: 10 Torque at 60 % ED: 4,25 Torque at 100 % ED: 3,2 Lubrication: oil/air Feed rate Rapid traverse speed: Max. 40 m/min B axis: 150 rpm C axis: 250 rpm Axis acceleration, XYZ: Max. 1g (10 m/s2) B axis: 100 rad/s2 C axis: 300 rad/s2 Tool changer: 68-fold Chip to chip: 12.5 s Tool change time: 10,0 s Work table: Erowa clamping ITS system - 120 mm Max workpiece diameter that can still be rotated 360 °: 230 mm Max. Workpiece height: 350 mm Max. Workpiece weight: 25 kg Control: Heidenhain iTNC 530 Weight: 5500 kg 15 tool holders HSKE40 without cutting tools and measure probe will be provided with machine (picture)

Condition: excellent (used), Year of construction: 2004, Swing over bed 800 mm Swing over saddle 490 mm Recom. machining dia 550 mm Max. machining dia. 730 mm Max. work lenght 750 mm X axis 390 (20+2370) mm Z axis 780 mm Chuck dia. 380 mm Speed range 20-200 rpm Spindle nose A2-11 Spindle bore dia 90 mm No. of tool stations (Type) 8(Base holder) OD tool height 32 mm Boring bar dia. 50 mm Indexing time 0.15 sec Rapid traverse X:12000 mm/min Z:16000 mm/min Cutting feed X,Z:0,001-500000 mm/rev Spindle (Cont./30min) 30/37 kW Deb Et Swowh Nwhs Eout Feed drives X:2.1/Z3.8 kW Coolant pump 0.4 kW Power requirements 50 kVA

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Control: SIEMENS 840D x-travel: 2000 mm y-travel: 500 mm z-travel: 500 mm feed: 1 - 8000 mm/min table size: 2120 x 550 mm table load: 2000 kp rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 20 m/min tool taper: HSK 63 A spindle speeds - continuously variable: 0 - 15000 rpm spindle drive: 20 kW Dob Eowh Nyvst Sw Eeut spindle bearing diameter: 70 mm position accuracy: 0.020 mm Control: SIEMENS 840D Tool diameter: 63 / 126 mm Tool magazine: Chain magazine: 40 pieces Total power requirement: 65 kVA Accessories: Chip conveyor

Condition: new, Year of construction: 2010, Functionality: fully functional, Grinding wheels, new. Various sizes, cup and flat more than 200 pcs. From diameter 10cm to 4 cm Dobswh Nwns Et Sw Esut

Condition: excellent (used), Year of construction: 2024, Functionality: fully functional, Used multiprocess MIG/MAG welding machine EWM Phoenix XQ 500 puls DW EX R1 5 m, MFG 2023 Multiprocess MIG/MAG pulse welding machine including all characteristics and welding processes, decompact, demodular Drive XQ wire feeder, Drive XQ HP WRS/WHS, MFG: 2023 Pivot support for wire feeder, “blueCool” coolant to -10 °C (-14 °F), 5 l, 5 l Intermediate hose package, water cooled, 14-pole, 1.8 m Welding torche PM 551 W LED X M9 3 m Wire spool adapter B300, MIG/MAG function torch with OLED graphic display, water-cooled, X technology, 4 m Workpiece lead with clamp, 550 A / 60 %, 95 mm² Pressure regulator with manometer, 30 l Mains plug, assembled, Workpiece lead with clamp: WK95mm² Ø 13 mm 550A/60% 4m/Z Crane frame – moves the crane lifting point from the bottom to the top Intermediate hose package, water cooled, 14-pole Cross-section: 95 mm²: Z MIG XQ 95 mm²/1.8 m 500A/80% AK300 Wire spool adapter for use with a wire basket spool (B 300) Setting range for welding current 5 A - 500 A Duty cycle 40 °C 500 A / 80 % 470 A / 100 % Open circuit voltage 82 V Mains voltage (ex works) 3 x 380 V - 400 V Mains voltage (possible) 3 x 440 V - 460 V Mains voltage (possible) 3 x 480 V - 500 V Mains tolerances (ex works) -25 % up to +20 % Mains frequency 50 Hz / 60 Hz Recommended generator power 33.2 kVA Efficiency 90 % Power consumption Pi 26 W Cooling capacity at 1 l/min.1500 W Pump pressure 3.5 bar Tank capacity 8 l Protection classification IP23 EMC classA Dimensions (L x B x H) 1152 mm x 686 mm x 976 mm Weight 125.5 kg / 276.7 lbs Standards IEC 60974-1, -2 and -10 CL.A Price Euro 8.400 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana Dueb Etewgy Eyo Sw Eet

Condition: excellent (used), Year of construction: 2008, Microstep plasma cutting machine cutting format 2000x6000MM power source Hypertherm 260 AMP year 2008 with nesting program on computer at the machine, incl. extraction and filter, many new wear parts Dueb Eet Uz Upet Sw Eet

Condition: good (used), Year of construction: 1987, Pressure 1250 t Bending length 15000 mm Column width 10160 mm CNC 10 control system with graphic display Machine weight approx. 230 t Space requirement approx. 17000 x 5400 x 5900 mm Additional information - Pressure: 1250 t - Bending length: 15000 mm - Control system: CNC 10 control system - Number of controlled axes: at least 10 - Column width: 10160 mm - Throat depth: 770 mm - Table length: 15000 mm - Dimensions: 17000 mm x 5400 mm x 5900 mm - Weight: approx. 230 t Equipment: Dusb Ejwh Nx Eot Sw Est - Crowning device - CNC 10 control system with graphic display - Hydraulic clamping of the upper tools - Multi-person operation - Increased Speeds - Automatic rear sheet stop, height-adjustable - Die cushion device - Horn length on both sides: 2,200 mm each