CNC Surface grinding machine

ABA Z&B Starline 500

Condition: ready for operation (used), functionality: fully functional, spindle bore: 42 mm, center height: 165 mm, center width: 635 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 30 rpm, overall weight: 900 kg, Ladies and Gentlemen, We are selling a Colchester Master 2500 lathe with Heidenhain digital readout. The machine is fully functional and can be tested on site. Availability: immediately Center width: 635 mm Gsdou St S Aepfx Agfsua Center height above bed: 165 mm Center height above support: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm. 16 steps Inner tailstock taper: MK 3 Drive power: 3.7 kW Space requirement: (LxWxH) 1700 x 880 x 1200 mm Weight: approx. 850 kg

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Gedeh Rdwxjpfx Agfsua Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: new, AXA 360° swivel cantilever crane Max capacity : Kg 500. Max height : mm 2804. Max overhang : mm 1360. Easily maneuverable due to 360° rotation and high load capacity pivoting wheels with bumper supports and parking brakes. Due to the frontal footprint of only 995mm, it can be used in aisles and confined spaces. The lifting arm is extendable in 4 different positions. Gusdpfegypgdox Agfsa

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 2500–2950 kg This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine. Gusdpfxjx D Nfus Agfea Application Types Turning

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1315/451, Completely overhauled: Mechanics, geometry, hydraulics, and electrical parts (checked and/or replaced) Wheelhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, bearings replaced, belts replaced, spindle disassembled, seals and O-rings replaced, adjustments made. Newly painted. Workhead: Disassembled, parts cleaned, worn or defective components replaced, motor overhauled, belts replaced. New spindle bearings. Newly painted. Tailstock: Disassembled, inspected, overhauled. Guodpfsw U Ry Nox Agfoa Hydraulics: Disassembled, motor checked, hoses replaced, defective and worn parts replaced. Hydraulic block checked. X-axis: Disassembled, all worn parts such as O-rings, seals, segments, etc. replaced, hydraulic piston overhauled, table ground. Z-axis: Disassembled, table ground, worn or defective parts replaced, hydraulic piston overhauled, newly painted. Electrical cabinet: Completely checked, various relays replaced. Paintwork: Colors: White RAL 9003 and Grey RAL 7011 Geometry according to manufacturer's protocol. Various accessories checked and cleaned. Origin: CH Voltage: 380 / 50 / 3 Net weight: approx. 2,200 kg Customs tariff number: 8460.2920 TECHNICAL SPECIFICATIONS Nominal distance between centers: 600 mm Max. distance between centers (with extended headstock): 750 mm Center height, standard: 125 mm Center height with interchangeable pads for heads: 175–250 mm Max. workpiece diameter (125 mm center height): 250 mm Max. workpiece diameter with interchangeable pads: 350–500 mm Swiveling range of table in each direction: 10° Max. grinding length for flat surfaces (max. width = 200 mm): 900 mm Continuously variable hydraulic table speed: up to approx. 6 m/min Table reversal delay: 0–5 sec Grinding wheel for external grinding, diameter - width - bore: 400x50x127 mm Grinding wheel for flat surface grinding: 250x13x76 mm Wheelhead spindle speed: 1,500/1,700/2,200/3,600 rpm Wheelhead swiveling range: 270°, with indexing every 90° Vertical travel of wheelhead, center height: 125–350 mm Transverse travel of wheelhead: 285 mm Hydraulic rapid traverse stroke: 40 mm Intermittent infeed of wheel by table reversal: 0.001–0.03 mm/dia Continuous infeed for plunge grinding: 0–0.9 mm/dia Micrometric infeed stop, by division: 0.001 mm/dia Workhead swiveling range: 360° Workhead spindle speed, stepless: normal/special: 20–400 / 10–400 rpm Internal taper of workhead/tailstock: Morse 5/3 Wheelhead motor: approx. 4 HP All technical specifications are given without obligation and subject to errors or omissions.

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc. Gusdeu A U Utopfx Agfja

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Technical data shown on pictures. Gsdpfouxrv Hsx Agfeua

Condition: new, Year of construction: 2026, functionality: fully functional, The Nanxing NCG3021L(LL) is a high-performance CNC nesting machining center engineered for automatic cutting, drilling, grooving, and part labeling, all within a fully integrated and automated workflow. This model incorporates automated loading, unloading, and labeling systems, delivering comprehensive automation, intelligent operation, and IT-driven production efficiency. Its open software interface enables seamless connectivity with furniture design suites and ERP platforms, ensuring fully optimized and data-driven panel processing. The professional FCC optimization software enhances cutting efficiency, minimizes material waste, and facilitates streamlined production management. This machine represents an ideal solution for advanced furniture manufacturing by reducing labor expenses while maintaining high standards of precision and productivity. Key Features - Automatic loading and unloading system equipped with a 3-ton lift table, pre-push device, and safety curtains for efficient material handling. - Rotary labeling system with integrated Honeywell printer, facilitating simultaneous labeling and machining operations. - Robust vacuum worktable (3100×2150 mm) segmented into 10 independently controlled zones, guaranteeing powerful and uniform vacuum suction. - Dual 7.5 kW oil-cooled vacuum pumps deliver maximum suction power at low noise levels. - High-rigidity gantry frame ensures enduring precision and operational stability at high processing speeds. - Italian-made 12 kW main spindle (HSK-63F, ATC, 24,000 rpm), featuring internal and external air blast for optimal dust extraction. - 12-position automatic tool changer (ATC) enables rapid tool changes, supporting a wide range of complex machining tasks. - 21-spindle drilling block designed for precise vertical and horizontal drilling operations. - Automated lubrication system minimizes maintenance needs and prolongs component life cycle. - Advanced dust extraction system with front and rear collection points maintains a clean working environment. - Comprehensive safety design includes a protective fencing system and optional optical barrier for maximum operator security. - User-friendly SYNTEC CNC control system compatible with MPR, DXF, TCN, and standard NC file formats. Technical Specifications - Working area: X: 3100 mm / Y: 2150 mm / Z: 50 mm - Worktable height: 1010 mm - Maximum traverse speed: X/Y axes 70 m/min, Z axis 20 m/min - Main spindle: 12 kW, HSK-63F, 24,000 rpm - Tool changer: 12-position servo-driven ATC - Drilling block: 21 vertical spindles, 2.5 kW, 4000 rpm, max drilling diameter 35 mm - Vacuum pump capacity: 2 × 7.5 kW, 250 m³/h Guedexcwnbjpfx Agfsa - Total installed power: 47 kW - Machine dimensions: 13,800 × 3,950 × 2,600 mm - Weight: 6,000 kg - Power supply: 380V / 50Hz / 3-phase Applications - Panel furniture manufacturing (kitchen cabinets, wardrobes, office furniture) - Nesting-based cutting and drilling of MDF, particleboard, and plywood - Automated production lines with integrated labeling for Industry 4.0 smart factories Advantages - Complete solution: automated loading, nesting, drilling, grooving, labeling, and unloading in a single workflow. - Outstanding efficiency: optimized software paired with dual synchronized gantries doubles processing throughput. - Labor saving: minimal operator involvement required. - Ideal for large-scale production: stable operation, precise machining, and consistently superior product quality.

Condition: repair required (used), Year of construction: 2003, Kern lathe CD 402 Baij 2003 in top condition but with control system issues. Gujdpfx Agsxn Axcsfja

Condition: like new (used), Year of construction: 2020, functionality: fully functional, STALAM RF 20 KW Gedpfx Ageucv Hujfoua ID.NO. 2795 Stalam mod RF 20 KW microwave oven for frozen meat/fish products. Thaws the product effectively from the core outwards in a few minutes. Year mod 2020 the machine is in like new condition! Band width 140 cm. It is also possible to fry products such as bacon etc. with the machine. Dimensions 570 x 200 cm Height 340 cm.