Hydraulic workshop press

MIOTAL® WHP 160

Year of construction: 2015, condition: ready for operation (used), A coolable (isolated) Fabdec milk tank is available. Volume: 10000l, length: approx. 3000mm, diameter: approx. 2200mm. The tank is equipped with an integrated agitator and a spray system for CIP cleaning. A cooling unit is not included. Tjdpst Hxdlofx Acnsb

Year of construction: 2016, condition: new, 1 unit of a completely overhauled, unused industrial bevel-helical gearbox from ASUG. TGL 21815. All gearbox parts have been replaced, with the exception of the housing!!! Clutch: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil capacity: 170 kg Speed: n1 = 1400 Speed: n2 = 17.5 Weight: 1450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Tjdegwlrdjpfx Acnsb Shaft height h1: 500 mm Overall height h2: 925 mm Length of base: 1170 mm !! The gearbox does not have an oil cooler !!

Condition: refurbished (used), Year of construction: 2023, operating hours: 813 h, functionality: fully functional, working width: 900 mm, area performance: 5,700 m²/h, overall weight: 957 kg, water tank capacity: 200 l, battery voltage: 36 V, The Kärcher B200R D90 Dose is a 2023 model and has only 813 operating hours. We have completely overhauled the machine, with every component cleaned and functionally tested. The squeegee, base plate, and collision protection have been sandblasted and newly powder-coated in-house. New rubber lips on the squeegee ensure optimal suction results. Todpfx Acoxx Ta Esneb The machine is sold with brand-new, maintenance-free gel batteries. Additionally, the Kärcher B200 R is equipped with a detergent dosing system, which precisely meters the cleaning agent into the cleaning process. For improved illumination of the working path, the machine also features an auxiliary work light that can be switched on as needed. The Kärcher B200 R is ideally suited for medium to large areas such as logistics warehouses, workshops, or underground car parks. Technical specifications: Working width: 90 cm Fresh water tank: 200 liters Suction width: 118 cm Weight: 957 kg

Condition: new, Year of construction: 2025, Protec Welding Turntable, 5000 kg load capacity Tsdpfoid Szcox Acnjb Variable speed control, 0.05 - 0.5 RPM Handheld remote control Height: 600 mm Diameter: 1500 mm Foot pedal remote control available at an additional cost.

Condition: new, type of input current: DC, total width: 370 mm, total length: 180 mm, total height: 190 mm, input voltage: 230 V, rotational speed (max.): 5,300 rpm, overall weight: 10 kg, input frequency: 50 Hz, warranty duration: 12 months, power: 0.18 kW (0.24 HP), grinding diameter: 13 mm, Sharpening of drills with a diameter of 2 mm to 13 mm Adjustable angle: 90 and 135 degrees Grinding speed: 5300 rpm Grinding wheel: CBN 200 Motor: 230V/1Ph/180W Weight: 10 kg Tedpfxoga T D Ts Acnjb

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop Tsdpfx Acowrm Dtjneb >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: new, Year of construction: 2025, load capacity: 20,000 kg, 20-ton container rotating device, roller stand, complete set 380 V, speed continuously adjustable from 200 to 1000 mm/min. for diameters from 500 mm to 4000 mm roller diameter 300 mm x 140 mm temperature resistance of the support rollers: 100°C synchronous dual drive AC motor, 380 V, 750 W with hand and foot remote control, complete set Tsdpsifgu Ujfx Acneb

Condition: reconditioned (used), K.H.D. Calibrator 1300H . Without frame . With hydraulic-unit, electric motor and Voith Turbo coupling . Tjdpfxsvt Su Ie Acneb With new cone and shell . Overhauled, sandblasted and painted .

Condition: new, grinding range 2 - 13 mm sharp cornered angle min./max. 90 - 140 Grad connected load 230 V Tsdeupxdqepfx Acnob weight of the machine ca. 10 Kg dimensions of the machine ca. 0,35 x 0,2 x 0,2 m

Year of construction: 2024, condition: new, Overband plate magnet with cleaning mechanism Made of stainless steel 1.4301, tightly welded Includes a drawer for cleaning Dimensions: 800x500x180mm 4 M16 ring bolts on the back These two lifting magnets were used by one of our customers as a "police magnet" in the meat processing industry. Both overband magnets are in perfect condition. The price mentioned refers to 1 piece. Currently, 2 pieces are available for immediate delivery from stock! All information is without guarantee, subject to availability! Conveyor belt, conveyor system, discharge conveyors, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overband magnet, magnetic belt separator Our core competence lies in providing our customers with exactly what they really need. We work together with our customers to develop customized, individual solutions and deliver corresponding systems from our own production. Please feel free to contact us by phone to find a suitable solution for your application. Overband plate magnet Made of stainless steel 1.4301, tightly welded Includes a drawer for cleaning 420 x 420 x 200mm 420 x 420 x 250mm 620 x 420 x 200mm 620 x 520 x 200mm 800 x 500 x 200mm 800 x 520 x 250mm Completely welded stainless steel housing to protect the magnet core Ring eyes for suspension Cleaning drawer for easy removal of accumulated contaminants. Tedohfwmdjpfx Acnjb Mounting possible above all types of conveyor systems...