Condition: used, Year of construction: 2006, spindle passage 65 mm spindle diameter in front bearing 110 mm number of spindle speeds 5.000 U/min Power 20/27 KW Control INDEX C 200-4 travel -x axis 850 mm travel -z axis 260 mm number of tapers in turret head 12 driven tools turning speeds 6.000 U/min CNC turning and milling center vertical | INDEX - V160C equipped with turret, milling spindle and pallet conveyor system. The machine only has 17.000 hours of Power-On. Deb Hh Hjvzcnzs Tvskl The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-160C | V-160 C | V 160 C | V 160C

Condition: used, Year of construction: 2008, turning diameter 432 mm turning length 864 mm control HAAS bar diameter 76 mm 3-jaw-chuck diameter 254 mm travel -z axis 864 mm travel -x axis 287 mm spindle speed: 3400 1/min spindle bore 88 mm swing over bed 762 mm swing diameter over bed slide 432 mm turret head 12 Pos. VDI 40 drive capacity - spindle motor 22 kW voltage 400 V weight of the machine ca. 7.250 t dimensions of the machine ca. 3,90 x 2,00 x 1,90 m - serial-no.: 3082298 - Machine Run Time: ---- h - control: HAAS - tool measuring arm Dob Hh H Toupmhwovokl - chip conveyor - collant equipment

Condition: excellent (used), Year of construction: 1978, Functionality: fully functional, turning diameter over cross slide: 940 mm, spindle bore: 180 mm, turning diameter: 1,250 mm, turning length: 6,000 mm, quill diameter: 200 mm, spindle speed (max.): 355 rpm, overall weight: 10,500 kg, MACHINE CAPACITY: Dob Howc Aupoh H Tvekl Maximum diameter on the bed: mm 1.250 Maximum diameter on the carriage: mm 940 Height of the centers: mm 625 Width and height of the bed: mm 800 x 630 Maximum weight of the piece between the centers: kg 5.000 Maximum weight of the piece between the steady rest: kg 6.000 Distance between the centers: mm 6,000 Maximum torque at the spindle: kpcm 125.000 Maximum cutting force: kp 5.000 SPINDLE: Front side shaft diameter: mm 180 Boring diameter: mm 102 Spindle taper 1:10: mm 120 Front end of the spindle CSN 20 1010: mm 290 Spindle speed in 24 steps: rpm 1.8 – 355 CARRIAGE: Longitudinal feeds at all spindle speeds in 54 steps: mm/rev 0.8 - 7 Longitudinal feeds with spindle idler shaft in 54 steps: mm/rev 0.66 - 56 Cross feeds: mm/rev 0.33 of the longitudinal. Longitudinal rapid movement: mm/min 3,600 Useful stroke of the cross carriage: mm 530 Useful stroke of the tool holder slide: mm 340 Max. tool section for the tool holder: mm 60 x 60 THREADS: a. For rack gear 27 metric threads at a pitch of: mm 0.125 – 56 b. For main screw 40 metric threads at a pitch of: mm 1 – 112 42 Whitworth threads, number of threads per inch: ¼ - 28 32 module threads: module 0.5 – 28 36 Diametral Pitch D.P. 56 – 1 36 Circular Pitch C.P. 1/16 – 3 ½ MAIN SCREW: Diameter per pitch: mm TR 65 x 12 TAILSTOCK: Diameter of the tailstock hole: mm 150 Diameter of the tailstock quill: mod. 200 Diameter of the hole cone: mm 100/1:20 Transverse movement of the tailstock: mm +/- 10 Max. axial load of the tailstock: kp 5,000 Machine weight: kg 10,500 Complete with: - Fixed steady rest - Instruction manuals

Condition: excellent (used), Year of construction: 2020, OKUMA CNC turning Centre with Y-axis, C-axis, sub spindle and live tooling Deb Hhowc Arho H Tvskl Type:LB3000 EXII Year:2020 Control:OSP-P300LA Suite Y-axis:+70mm / -50mm W-axis:800mm Distance between centres::1020mm Turning diameter over bed:580mm Turning diameter over cross slide:470mm Max. workpiece diameter:410mm Spindle bore:91mm Main spindle speed:4200rpm Sub-spindle speed:6000rpm Toolchanger:12atc Machine weight approx.:6850kg With automatic doors (original from the factory) With parts catcher Option extended tool data management Smoke extraction Please Note: The above information has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing, since machines are in production at time of photos and availability can not be guaranteed. We advise you to check any vital details!

Condition: used, Year of construction: 2003, spindle bore: 52 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 450 mm, rotational speed (min.): 4,000 rpm, bar diameter: 52 mm, The Colchester TORNADO A 90 lathe was manufactured in 2003. Spindle speed 4000 rpm, spindle bore 52 mm and spindle motor power 11 kW. It is equipped with a Fanuc 21 i control system, including a TORNADO MBF feeder. Dob Howc Ac Tsh H Tvjkl

Condition: good (used), Year of construction: 2007, operating hours: 21,168 h, machine/vehicle number: 8087020322B, For sale: GILDEMEISTER Sprint 65 linear CNC lathe Model: GILDEMEISTER Sprint 65 linear Year of manufacture: 2007 Control: SIEMENS 840D Operating hours: 21,168h On-time hours: 61,362 h Technical data: - Max. revolutions of main and counter spindle: 5000 rpm - Main spindle passage: up to Ø 65 mm (bore Ø 75 mm) - Rapid traverse speeds: up to 30 m/min Equipment: - 3 turrets with 12 stations each - Turret 1 has a fault and needs to be repaired. - Tool holder VDI 30 - Drive for driven tools on all turret stations - C-axis for main and counter spindle - Y-axis on slide 3 - Counter spindle flushing with coolant flushing - Workpiece collection device - Workpiece conveyor belt - Mechanical preparation for oil mist extraction device - Electrical interface and software preparation for bar loading magazine - Synchronous operation between main and counter spindles - Hinged belt chip conveyor - 2 additional inputs/outputs (4 M functions) - Workpiece counter and time calculator - Rigid thread cutting (without compensating chuck) - Software for polygon turning on slides 1, 2, 3 - Constant cutting speed - Spiral interpolation on slide 3 (thread milling) - Spindle speed monitoring system - Three-color signal light - Air conditioning for electrical control cabinet - High-pressure coolant system with belt filter and heat exchanger (capacity 980 l, pressure 20 bar, 40 l/min. for turrets 1, 2 and 3) - 3-jaw chuck for main spindle - 3-jaw chuck for counter spindle - Coolant spray gun for cleaning the work area - Differential pressure system for the counter spindle with the option of setting 2 different clamping pressures - Flushing of the upper slides with cutting fluid - The machine is powered. Price: €36,000 Location: 75334 Straubenhardt If you are interested or would like further information, please contact us. Dksb Hh Hsvzwm Eo Tvel

Condition: used, Year of construction: 2000, - - - - - - - - - - - - - - - - - - - - - - - - - - - Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. Dkeb Hh H Tevnwfzovsl The machine is in very good condition. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: used, Year of construction: 2008, turning diameter 210 / 350 mm Dkjb Hh H Tettckmevol turning length 400 mm control Fanuc 0i-TC swing diameter 500 mm travel -x axis 195 mm travel -z axis 430 mm spindle speed: 3500 1/min bar diameter 51 mm spindle bore 75 mm C-Axis 0,001 ° turret head 12 Pos. taper in tailstock-quill MK 4 tailstock travel 100 mm diameter of quill 80 mm rapid traverse X-axis 30 m/min rapid traverse Z-axis 30 m/min drive capacity - spindle motor 11 / 15 kW voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,2 t dimensions of the machine ca. 2,70 x 1,90 x 2,10 m chip conveyor 2,80 x 0,60 x 1,30 m Transformer 0,60 x 0,45 x 0,55 m - Serial-No.: M015356K2F - Machine ON: 14.494 h - control: FANUC Oi-TC - Machine with C-axis and turret for life tools (no tools in the accessories) - Tool meeasuring arm - Parts collecting tray - Collet chuck - 3-jaw chuck Samchully Ø 250 mm - Open center clamping cylinder - Automatic sliding door - chip conveyor

Condition: used, Year of construction: 2008, Functionality: fully functional, machine/vehicle number: X2S190, SPECIFICATION Dkob Hewcz Tqjh H Tvel Distance between centres 1250mm Floor to spindle centres 1086MM Swing over bed (saddle wings) 400mm Swing over cross slide 246mm Swing in gap 858mm Gap width from faceplate 165mm Spindle bore 55mm Spindle nose Camlock D1-6 Taper in nose bush No. 4 MT Spindle speeds: Low range 1-297rpm Medium range 1-861rpm High range 1-2700rpm Tailstock quill travel 140mm Tailstock diameter 73mm Tailstock taper No. 5 MT MACHINE EQUIPPED WITH Fanuc 21iTB CNC Control Operation modes: manual, sequential, AlphaLink and ISO 3 jaw chuck Parat toolpost Lighting Coolant system Enclosed guarding Manual

Condition: used, Year of construction: 2000, max. swing diameter over bed 450 mm max. turning diameter 298 mm centre distance ~ 580 mm control SIEMENS 810D travel -x axis 221 mm travel -y axis 590 mm max. Spindle speed 6.000 U/min. spindle bearing diameter 85 mm spindle bore 55 mm number of tapers in turret head 12 driven tools turning speeds 6.000 U/min CNC lathe | SPINNER - TC46MC equipped with a turret for driven tools, bar feeder and chip conveyor. The machine is in a well-maintained condition. Dkebovr Hmvs Hh H Tvol Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 46MC | 46-MC | TC-46 | TC 46 MC

Condition: used, Year of construction: 1999, centre height 255 mm centre distance 1080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1000 mm spindle taper KK 8 DIN 55027 control Sinumerik 810 D SIEMENS bed width 360 mm spindle bore 70 mm turning speed range 2 - 2800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder MULTIFIX Typ B / CAPTO drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m chip conveyor 4,00 x 0,40 x 1,50 m - Serial-No.: 346 / 03 Dkobeqzm Ngj Hh H Tvsl - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX - coolant equipment - machine lamp

Condition: used, Year of construction: 2007, swing diameter 640 mm max. turning passage 640 mm control Simens 840 D Powerline - - - - - Main spindle - - - - - - - - - - - bar material dia. 65 mm chuck diameter 200 - 315 mm spindle bore diameter 80 mm diam. of main spindle in forward position 120 mm --- Subspindle --- - - - - - - Djbevx U A Sj Hh H Tvokl bar material dia. 65 mm chuck diameter 315 mm spindle bore diameter 80 mm forward bearing diameter 120 mm - - - - - General data - - - - - - - - - - - spindle distance 1.500 mm turning length 1.185 mm Main-/Counter -spindle turning speeds 5.000 U/min driven tools turning speeds 12.000 U/min Slide cross X1, Y1: 550 / 180 mm Slide cross Z1: 1.185 mm Slide cross B1: 240 ° Slide cross X2: 180 mm Slide cross Z2: 1.050 mm Slide cross Z3: 1.150 mm CNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret for driven tools and and a portal loading system (Pneumotec Portalsystem S-01623a). The machine has only approx. 32.000h operation hours. The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GMX250linear | GMX-250 linear | GMX 250linear | GMX-250linear

Condition: used, Year of construction: 2011, work travel X:320 & Z:1250 mm rapid traverse X:20 & Z:40 m/min control INDEX - C200-4D --- MOTOR MILLING SPINDLE --- ----- tool taper HSK A63 turning speeds 12000 U/min Power 27,5 KW front bearing 80 mm Dsb Hh Hot Ukw To Tvekl turning speeds 3000 U/min MAIN SPINDLE D102 direct drive ----- spindle diameter in front bearing 1200 mm spindle passage 102 mm forward bearing diameter 170 mm CNC Turning- and Milling Center | INDEX - G400 S-1/300 The machine is in a very good condition with only 2500 H main working hours. + MARPOSS probe The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: G400 | G 400 | G400 S1 300 | G400S1 300

Condition: used, Year of construction: 2008, swing over bed 923.8 mm Swing over cross slide 755 mm max. turning length 510 mm bar capacity 65 mm control MSX-850 III main spindle speeds 5.000 U/min travel -x axis 260 mm travel -y axis 100 (+/- 50) mm travel -z axis 590 mm CNC Turning- and Milling Center | MORI SEIKI - NL2000SY / 500 equipped with main/counter spindle, y- axis, a turret for driven tools and chip conveyor Scope of delivery: + 2x diven tools horizontal + 2x driven tools vertical + 2x passive tool holders + chip conveyor + power chuck (KITAGAWA) The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: NL2000SY500 | NL 2000 SY / 500 | NL-2000SY / 500 | NL-2000 SY / 500 Debjvpr Sxo Hh H Tvokl

Condition: used, Year of construction: 2007, Swing over bed 923,8 mm Swing over cross slide 755 mm max. turning diameter 356 mm Max. Turning length 515 mm control MSX-850 III travel -x axis 260 mm travel -y axis -50, +50 mm travel -z axis 590 mm travel - z axis (spindle 2) 624 mm Dksb Hovwgkrsh H Tvjl driven tools turning speeds 6.000 U/min CNC Turning- and Milling Center | MORI SEIKI - NL1500SY / 500 equipped with main/counter spindle, b- + y- axis, a turret for driven tools and chip conveyor and loading and unloading system (alphaMAX). The machine has only 3.400h processing time hours. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: NL1500SY500 | NL 1500 SY / 500 | NL-1500SY / 500 | NL-1500 SY / 500

Condition: used, Year of construction: 2010, swing dia. 440 mm max. turning diameter 220 mm turning length 450 mm travel -x axis 200 mm control Fanuc 18i-TB max. helix angle 60 ° spindle bore 64 mm Deb Hh Hevzcple Tvekl tool taper VDI 30 numbers of positions in the tool changer 12 CNC Lathe | COLCHESTER - TORNADO T6MS equipped with counter spindle and chip conveyor. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T6 MS | T6-MS | T 6MS | T-6MS | T-6

Condition: used, Year of construction: 2003, bar material dia. 75 mm max. max. swing dia. 540 mm turning length 650 mm control FANUC Oi-TB machine weight ab. 6.200 kg CNC Turning- and Milling Center | JOHNFORD - SL-50-CF-Y equipped with chip conveyor. Additional equipment: + C axis + Y axis + driven tools Dkjb Hh H Tevzcqvevjl The machine is in good condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SL 50 | SL50 | SL-50 CF Y | SL50 CF Y

Year of construction: 2005, Condition: used, max. turning diameter 540 mm max. turning length 1.020 mm bar capacity 65 mm Spindle speed 5.000 min -1 driven tools turning speeds 10.000 U/min control FANUC 18i-TB Dimensions (L x W x H) 4.520 x 2.300 x 2.600 mm machine weight ab. 12.000 kg Dkob Hslmr Eish H Tvjl CNC Turning- and Milling Center | DOOSAN - PUMA MX 2000 S equipped with chip conveyor. Additional equipment: + counter spindle + B axis The machine is in good condition. A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: MX2000S | MX-2000 S | MX 2000S | MX2000 S

Condition: used, Year of construction: 1998, - - - - - - - - - - - - - - - - - - - - - - - - - - - Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. A machine video from the production plant will be shared on request. Dksb Hevnwf Ieh H Tvsl Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: used, Year of construction: 2001, workpice diameter max. 90 mm forward bearing diameter 140 mm Turning speeds mainspindle 4.200 U/min Power 35,5 KW Control INDEX C 200-4 travel -x axis 1.500 mm travel -z axis 340 mm travel -y axis 180 mm b-axis 360 ° CNC turning and milling center vertical | INDEX - V300 equipped with a turret for driven tools as well as y- + B- axis. Further information: - direct measuring system on X + Z The machine is in good condition. For additional equipment information please refer to the original order confirmation which is included in the offer of this machine. Dkjb Hh H Tsvzcnbsvol - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: V-300 | V 300

Condition: used, Year of construction: 2008, max. swing diameter over bed 510 mm max. turning diameter 260 mm Max. Turning length 540 mm travel -x axis 240 mm center height over bed 260 mm control FANUC 21i-TB spindle bore 77,5 mm no. of tools in turret 12 x tool taper VDI 40 Dkjbevzcqpj Hh H Tvol CNC Lathe | COLCHESTER - TORNADO T8 The machine is in good condition. Please refer to further technical details in the attachement of the offer. A machine video will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: T 8 | T-8

Condition: used, Year of construction: 2015, max. bar material dia. 32 mm Number of axles 7 St. Dkjb Hh Hovzcqce Tvsl numbers of positions in the tool changer 23 Stk./pcs. number of driven tools 6 Stk./pcs. driven tools turning speeds 6.000 U/min control FANUC - F 32i-B --- Main- / Counter- spindle --- - - - - - - max. Spindle speed 7.000 U/min. c-axis 0,001 ° - - - - - - Dimensions (L x W x H) 3.800 x 1.400 x 2.200 mm weight of the machine 3.100 kg Turning Automatic Lathe - swiss lathe | STAR - SR32-JN Scope of delivery / equipment: + Main/counter spindle, + 2x tool turret, + chip conveyor, + bar loading magazine: FMB turbo RS 3-36-3200 + part ejection, + part conveyor belt The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: SR 32JN | SR 32 JN | SR32JN | SR-32 | SR 32

Condition: used, Year of construction: 2008, greates pass round over bed 600 mm swing diameter over face slide 500 mm control Siemens Sinumerik 840 PL max. turning diameter 430 mm Max. Turning length 744 mm max. bar material dia. 65 mm Dsb Hhjv Rgzks H Tvjkl travel -x axis 270 mm travel -z axis 750 mm travel -x2 axis 205 mm travel -z2 axis 750 mm travel -y axis 100 (+/- 50) mm main spindle speeds 0 - 5.000 U/min Subspindle speed 0 - 7.000 U/min number of tapers in turret head 2x 12 tool taper VDI 30 CNC Turning- and Milling Center | EMCO - HYPERTURN 665MCPlus with main and counter spindle, C and Y axis, 2 turrets aligned for driven tools, and equipped with a bar feeder Irco Profimat as well as a coolant system Knoll SF 1000/Turbo- 1. The machine has approximately 26,710 hours of production operation. Scope of delivery / Equipment: + 2 spindles: main and counter spindle with C-axis + 2 turrets for driven tools (each with 12 stations) + Upper turret equipped with Y-axis + Internal cooling + Chip conveyor + Bar feeder Irco Profimat + Driven tools (straight and angled) + Chucks for main and counter spindle + Extraction system + Workpiece discharge device with conveyor belt + Coolant system Knoll SF 1000/Turbo-1 + Various holders, approx. 80 pieces VDI 30 + Boring bar holders + Jaw holders The machine is in well-maintained condition. Please refer to the offer for further technical details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HYPERTURN665 | HYPERTURN-665 | EMCO-HYPERTURN

Condition: used, Year of construction: 1997, max. swing over bed 890 mm max. Turning diameter over bed 830 mm centre distance 2.000 mm control SIEMENS - 840 C main spindle bore 122 mm spindle diameter in front bearing 200 mm driven tools turning speeds 1.250 U/min CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 25 UK / 2000 equipped with a turret for driven tools and tailstock. The milling drive was overhauled in 2023. Additional equipment / extensive package of tools a.o.t.: - Centering points, - Jaw sets, - Clamping jaws, - bezel - 2x 3 jaw chuck, The machine videos from the production plant will be shared on request. The machine is in a well-maintained condition. Dksb Hh H Tjvn U Tiovjl Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Heynumat 25 UK | Heynumat 25-UK | Heynumat 25 UK 2000

Condition: used, turning diameter 1.600 mm max. swing diameter 1.700 mm control Siemens - 840D faceplate turning speed range 1 - 320 U/min rapid traverse 3.000 mm / min feed range 1 - 3.000 mm/min size of pallet 1.168 mm numbers of pallets 2 main drive 55 kW Vertical turret lathe with cnc | SCHIESS MOWEG - BERTHIEZ TFM 125 has been overhauled by SCHIESS MOWEG (RETROFIT) in 2007. The machine video from the production plant will be shared on request. The machine is in very good condition and was in operation at an aviation company until recently. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TFM125 | TFM-125 Dob Hjvp Shgoh H Tvjkl