CNC Turning- and Milling Center

JOHNFORD SL-50-CF-Y

Condition: ready for operation (used), Year of construction: 2003, operating hours: 11,604 h, functionality: fully functional, turning length: 650 mm, turning diameter: 540 mm, bar diameter (max.): 75 mm, C and Y axes present and equipped with chip conveyor and bar loader TECHNICAL DETAILS Bar diameter: 75 mm Swing diameter: 540 mm Turning length: 650 mm Control: FANUC Oi-TB Tools: driven MACHINE DETAILS Machine weight: approx. 6,200 kg Dsdpjvtpv Ajfx Ab Tjwf Cutting time: 11,605 h Switch-on time: 61,001 h Part counter: 251,775 pieces

Condition: good (used), Year of construction: 2015, Very good machine - precise and reliable... worked in 1 shift only (8- 10 hours per day) Dsdpov Acphefx Ab Towf

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT30 - Spindle power : 6.7 [kW] - Spindle speeds : 10.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700 x 400 x 300 [mm] - Rapid traverses rates (X/Y/Z) : 50 / 50 /56 [m/min] - Cutting feed rates (X/Y/Z) : 1 - 30 [m/min] - Distance table / spindle nose (min./max.) : 330 - 630 [mm] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 - Tool exchange time : 0,8 [sec] TABLE - Table dimensions : 800 x 400 [mm] - Maximum weight upon table : 250 [kg] POWER SUPPLY - Supply voltage : 220 [V] - Total installed power : 9,5 [kVA] Dwjdpfxevt Eifs Ab Tjf WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.220 [mm] - Machine height : 2.497 [mm] - Machine weight : 2.400 [kg] EQUIPMENT - CNC : Brother CNC-C00 - Interface : Ethernet / USB - Electronic handwheel - Type of divisor : 4e axe CNC intégré * Coolant tank * with high-pressure pump - Coolant through spindle - Electric transformer

Condition: excellent (used), TECHNICAL CHARACTERISTICS Capacity: Chuck diameter: 3.000 mm Maximum turning diameter: 3.110 mm Maximum piece weight: 20 Tn Revolutions: 1,5-39,5 Rpm Main motor power: 45 Kw Movable crossbeam: 1.200 mm Height under crossbeam: 1.800 mm Dwsdpfx Asr Ddu Djb Tjf Vertical lathe with two arms: Right carriage pentagonal turret 5 positions with automatic rotation X travel: 1,500 mm Z travel: 965 mm Left slide with RAM Travel X: 1.500 mm Travel Z: 1,200 mm Remarks: Independent control panel 2 x CNC Fagor 8055 for the control of the 2 slides from the same screen. Grinding head (optional) Year of manufacture/reconstruction: 1975/2001

Condition: good (used), Year of construction: 2007, turning length: 1,065 mm, turning diameter: 470 mm, Chip conveyor SMW 315 3 chuck 2 x Radial live tooling holders 2 x Axial live tooling holders Spindle bore 80 mm BMT-Tooling system Tool measuring probe Spindle hours 6960 / 6270 Running hours Max. turning Ø: 470mm X-Axis: 260mm Z-Axis: 1065mm Spindle bore: 80mm Speedrange: 4200Rpm Spindle power: 30kW Dwedpfx Abjwq Rpws Tjf ATC / revolver: 12 BMT Tool system Speed live tools:6000Rpm Power live tools:7,1kW Length: 3310mm Width: 1900mm Height: 1970mm Weight: 6100kg

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N Dwodpfxowbvhae Ab Tsf rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: good (used), Cylindrical Grinder STUDER Favorit S35 Dwodpfxsrakibe Ab Tjf

Condition: good (used), Year of construction: 2000, Daewoo Puma 230, year of manufacture 2000, Fanuc 18 iT control, turning length 548 mm, turning diameter 350 mm, 10-position turret, tailed tailstock, Dodpfswx I Efsx Ab Tswf three-jaw chuck Ø 254 mm, tool measuring arm, swarf conveyor, coolant system, main spindle newly mounted, flat guides, accessories,

Condition: used, Year of construction: 2014, DMC DL 80V CNC vertical lathe Dsdevr Ecpopfx Ab Towf Year of manufacture: 2014 800 mm turning diameter 750 mm turning length 30 kw 2000 rpm spindle 12-position turret 21" chuck Fanuc Oi-Td control Machine weight 9800 kg With chip conveyor and standard accessories

Condition: used, Year of construction: 2008, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 300 mm, Visio 500 optical/tactile 3D measuring machine. Travel range: 453 (400 X, 500 Y, 300 Z). Measuring software: PC-DMIS CAD Version 2015. Probe change rack with 6 positions, equipped with 2 TESASTAR MP modules in total. Silent PC Big Tower with Windows 7 (fully installed and operational). Camera with 200x optical zoom featuring ring light/coaxial light and transmitted light (diascopic). All functions fully operational. Y-axis has minor scratches, which have been polished. This does not affect functionality or accuracy. Dwjdpfxjiyymrj Ab Tsf