Condition: ready for operation (used), Year of construction: 1961, Manufacturer: WMW NILES lathe DLZ 630 Condition: used Turning diameter over bed: 630 mm Feed: quer: 0,018-1,25 mm/U Dkeb Hh Hjdwfdfe Tvel Hollow: 70 mm Centre height: 290 mm Spindle speed: 22,5 – 1120 / 18 step U/min Turning length: 2000 mm Total power requirement: 15,0 kW Turning diameter over bed: 630 mm Weight of the machine ca.: 4,2 t Transport dimensions lxwxh: 4,5×1,35×1,5 m Turning diameter over slide: 340 mm If you need more information. We are here to help! Please contact us via the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2022, operating hours: 700 h, Functionality: fully functional, Like-new OKUMA LB3000II-MYW 800 Year of manufacture: 02/2022 On-time hours: approx. 3000 Spindle hours: approx. 700 Control: Okuma OSP-P300LA including OSP suite with numerous apps Eco Suite with extensive energy-saving features Counter spindle on W-axis, 825 mm travel and driven tool stations/C-axis and Y-axis - Main spindle: Short taper 6, front bearing diameter 120 mm, bore diameter 80 mm, hollow shaft motor with 22 kW power, speed range 45-5000 rpm, torque 427 Nm - 12-station tool turret with "radial" direct mounting system, drive data: 7 kW, 40.4 Nm, 45-6000 rpm Dkeb Hewc N Aaoh H Tvel C-axis with 0.001° resolution Synchronized tapping and automatic main spindle interpolation - Y-axis with 115 mm stroke (+70 / -45 mm) and hydraulic clamping - Counter spindle on W-axis, cylindrical mount, front bearing diameter 100 mm, bore diameter 62 mm, speed range 50 - 6000 rpm, W-axis rapid traverse 30 m/min C-axis function (0.001°) on counter spindle Tool height correction in Y-axis for turning tools Tool monitoring system Handwheel Tool measuring device 4 GB part program memory MacMan machine management 2x USB 2.0 ports Ethernet/LAN interface with browser and DNC-T1 Chuck opening/closing with the spindle running via M-function Electrical Spindle orientation +/- 0.1° 96 tool corrections Hi-Cut Pro for driven tools Kitagawa chuck, bore in chuck: diameter 75 mm, outer diameter: 254 mm, speed: 4,200 rpm, bore in draw tube: diameter 70 mm Kitagawa chuck, bore in chuck: diameter 45 mm, outer diameter: 169 mm, speed max. 6,000 rpm, bore in draw tube: diameter 45 mm Hinged belt chip conveyor Mayfran MT 10 - discharge height approx. 1,200 mm Submersible pump with motor, reinforced coolant pump 4 bar / 35 l/min Bar loader LNS SL 80 S Programmable workpiece catcher, with finished part container mounted on the front of the door, pneumatic 6 bar, for parts up to diameter 80 x 150 mm, workpiece weight max. 5.8 kg Availability: immediately

Condition: excellent (used), Functionality: fully functional, Swing over bed: 1290mm Swing over cross slide: 910mm Swing in gap (l:500mm): 1580mm Center distance: 6000mm Spindlebore: 155mm Spindle speed: 6-800rpm Spindle nose: ASA A2 11" Workpiece between centers: 20 tons Taper in tailstock: Mk6 Longd.feed: 0.045-5mm/r Crossfeed: 0.0220-1.5mm/r Thread metric: 0.5-56 Thread's modulus: 0.25-28 Threads whitworth: 1/2-84/ " Dkob Hhjwc Nzpe H Tvjl Spindle motor: 30 hp Manufacturing year: 1971 Length: 9500mm Width: 2000mm Height: 1600mm Weight: 13400kg Sony DRO cross slide 3 pcs. Steady rests Face plate 4-jaw chuck Hardened guideways Power on topslide

Condition: used, Year of construction: 2011, Selling a well-maintained CNC turning and milling center DMG Mori Seiki NLX 2500 SY/700, built in 2011 with a Mitsubishi 730 BM control! Only around 9000 processing hours! Travel paths X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Equipment and accessories: Tool turret: 12 positions, all driven Speed of driven tools: Max. 10000 rpm -Part catcher - Electronic main connection: 400 V - Power consumption: 37.6 KVA Dksb Hhsu Nu Efs H Tvjl - Internal cooling: available - Main spindle chuck: Kitagawa BB210AB - Counter spindle chuck: Kitagawa B206A521F - Turning diameter: 366 mm - Turning length: 705 mm - Hollow spindle: 80 mm - Main spindle max. speed: 4000 revolutions, with three-jaw chuck - Power: 18.5 kW - Counter spindle max. speed: 6000 revolutions, with three-jaw chuck - Chip conveyor, -Tool measurement in the work area -Measuring arm can be used manually for the counter spindle - Short bar loader, make LNS - Incl. tools, 8 fixed tools, 3 driven tools - Incl. extraction system, make Indusa - Incl. complete documentation Machine is available immediately! Machine is completely cleaned and checked! Machine is loaded by us! Transport can be organized on request!

Condition: excellent (used), Year of construction: 2008, LZ lathe, manufacturer TOS SUS80-2750, year of manufacture 2008, completely overhauled by TOS CELAKKOVICE. Overbed diameter: 840 mm Djb Hhowavx Nj H Tvjkl Overhead diameter: 530 mm Center length: 2750 mm Spindle speeds: 7.1-900 rpm Spindle bore: 82 mm Input in both X-Z directions Multifix tool holder size: D1 Forkardt chuck: 400 mm Faceplate: 800 mm 2 fixed steady rests and 1 with running steady Cooling system available Machine documentation available. Machine in very good condition, little used. For further information, see data sheets.

Condition: used, Year of construction: 2019, Chuck - 12” Length - 1200mm Djbsv Thr As Hh H Tvskl Controller - Fanuc Oi Mate-TD

Condition: excellent (used), Year of construction: 1973, Functionality: fully functional, spindle bore: 81 mm, turning diameter: 590 mm, spindle speed (max.): 950 rpm, bed width: 490 mm, rotational speed (max.): 950 rpm, overall weight: 3,900 kg, quill mount: MK 5, spindle mount: MK 5, Year: 1973 Rotating length: 2000mm Diameter over bed (max): 590 mm Diameter over cross slide: 380 mm Spindle Hole: 81mm Distance between centers: 1500 mm Deb Hh H Teium Tmovskl Minimum spindle speed: 19 rpm Maximum spindle speed: 950 rpm Total power requirement: 11 kW Weight: 3,9t

Condition: not inspected (used), Year of construction: 2001, turning length: 1,500 mm, turning diameter: 520 mm, spindle bore: 80 mm, fagor 8055 command capacity 1500X520MM Dsb Hh Hsvupaqe Tvjkl spindle bore 80MM

Condition: excellent (used), Year of construction: 2002, Biglia B 301 SM .. CNC control FANUC 18 ITB Equipment .. Number of spindles: 2 .. Number of turrets: 1 .. Live tools: yes .. C-axis .. B-axis X-axis Z-axis WORKING RANGE - TURNING- Dkob Hh Howc Dhws Tvjl .. Swing diameter (max.): 400 mm .. Turning diameter (max.): 220 mm .. Bar work (max.): 45 mm .. Maximum workpiece length: 380 mm Short bar loader AGW

Condition: excellent (used), Functionality: fully functional, WORKING CAPACITY Centers distance 12000 mm Dsbjwc Dg To Hh H Tvekl Centers height 1000 mm (diam. on the bench 2000 mm) mm Max swing on saddle 1800 mm Max swing in the gap 2500 mm Notes CNC ECS 2801 BED Guide-ways number 4 monolithic TURRET Position Baruffaldi 4 automatic positions EXTRA Maintenance & Use books Yes Open steadies 2 Availability Ready Platform 2000 mm

Year of construction: 2014, Condition: used, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. Djb Hjqvd Iqeh H Tvekl The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: used, Year of construction: 2019, Controller - Fanuc Oi TF Year - 2019 Hydraulic Chuck size - 15" with rpm 2500 Manual Chuck size - 20 Inch include Turret capacity - 12 Spindle bar capacity Dia - 115 mm Max turning dia - 635mm Swing over - 711mm Dksb Hsv Tg U Nsh H Tvel Z-Axis - 2500 mm

Condition: used, Functionality: fully functional, manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm Dob Heudi H Deh H Tvokl height: 1265 mm machine weight: 3550 kg

Condition: excellent (used), Year of construction: 2016, Takamaz XY 120 Plus with Fanuc OTi Technical Specifications: • Year of Manufacture: 2016 • Control System: Fanuc Oi-TD • Machining Hours: 9,247 hours • Control System Hours: 24,218 hours (as of March 25, 2025) Axes: • X1 axis (150 mm) • Z1 axis (330 mm) • Y1 axis (+/- 35 mm) Djb Hh Hjwc Db De Tvjkl • X2 axis (150 mm) • Z2 axis (440 mm) • Machining Capacity: • Max. Turning Diameter: Main 170 mm / Sub 135 mm • Max. Turning Length: 330 mm • Bar Capacity: Main Ø 42 mm / Sub Ø 20 mm • Spindle Speed: up to 5,000 rpm • Drive Power: Powerful spindle motor for high cutting speeds • 2 Tool turrets: 12-station turret each _____ Accessories • Bar loader: Short bar loader • Coolant system *AGW *Documentation

Condition: like new (used), Year of construction: 2010, Functionality: fully functional, WORKING CAPACITY Max bar working diameter 65 mm Max turning diameter 230 mm Max working length 250 (320) mm CNC CNC Fanuc 31i-T Notes Manual Guide, Polygoning, SBS Drives Fanuc MAIN SPINDLE Max rotation speed 4000 rpm Spindle nose ASA6” Spindle hole 80 mm Internal bearing diameter 110 mm Chuck diameter 165/210 mm Max power 26 kW Accuracy (C axis) 0.001° SUBSPINDLE Max rotation speed 5000 rpm Spindle nose ASA5” Spindle hole 55 (45 passage) mm Internal bearing diameter 80 mm Chuck diameter 165 mm Max power 11 kW Accuracy (C axis) 0.001° Automatic B axis positioning offset 115mm / stroke 420mm Rapid feed B 30 m/min TURRET 1 Rotation time (1 pos) 0.15 sec. Driven tools speed 4000 rpm Driven tools power 3.7 Kw Axis stroke X1 170 mm Rapid feed X1 18 m/min Axis stroke Z1 390 mm Rapid feed Z1 30 m/min Axis stroke Y1 90 (+40/-50) mm Deb Hh Hewc A Txj Tvjkl Rapid feed Y1 9 m/min TURRET 2 Positions number 12 Rotation time (1 pos) 0.15 sec. Number of driven stations 12 Driven tools speed 4000 rpm Driven tools power 3.7 Kw Axis stroke X2 170 mm Rapid feed X2 18 m/min Axis stroke Z2 390 mm Rapid feed Z2 30 m/min Axis stroke Y2 90 (+40/-50) mm Rapid feed Y2 9 m/min EXTRA Coolant pump 18Bar 350lt. Tool presetter 2 Workpieces conveyor belt Yes Chip conveyor yes Workpiece ejection robot yes Machine total weight 7400 kg Floor space 4400x2150x2200 mm The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, greates pass round over bed 670 mm swing diameter over bed slide 490 mm max. turning diameter 490 mm control SIEMENS - 840 D main spindle bore 115 mm external spindle dia. in forward position 160 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 5 UK / 1500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, - 3 jaw chuck, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. Dkobeu Hrbfs Hh H Tvel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 5 U | HEYNUMAT 5-U | HEYNUMAT 5 U 1500

Condition: not inspected (used), Functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm Dkob Hsqwlmqjh H Tvol above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Year of construction: 2014, Condition: used, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° Deb Hh H Teqvd Iuovskl Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: used, Year of construction: 1998, turning length 3.000 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 3.700 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MC / 3000 equipped with a well as travelling lynette and tailstock. Dksb Hhsvfxmnj H Tvel Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MC3000 | N40MC

Condition: used, Year of construction: 1998, turning length 4.500 mm greates pass round over bed 810 - 760 mm swing diameter over slide rest 740 mm control SIEMENS - 840 C max. turning diameter 800 mm turning diameter over slide 740 mm travel -x2 axis 875 mm travel -z2 axis 5.200 mm CNC Turning- and Milling Center | NILES-SIMMONS - N40 MCT 4500 equipped with a turret for driven tools as well as travelling lynette and tailstock. Additional equipment: - Centering points, - Jaw sets, - Clamping jaws, The machine is in a well-maintained condition and can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. Dksbeu Hra Is Hh H Tvol - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: N-40 | N 40 | N40MCT4500 | N40MCT

Condition: used, Year of construction: 1999, max. bar material dia. 42 mm max. turning diameter 180 mm turning length 350 mm control Fanuc 18i Main-/Counter -spindle turning speeds 6.000 U/min y-axis +/- 40 mm number of tapers in turret head 12 tool holder VDI 25 Dimensions (L x W x H) 3.838 x 820 x 1.900 mm weight of the machine 4.400 kg CNC Turning- and Milling Center | SCHAUBLIN - 42S TM-5 with main and sub-spindle, Y-axis, turret configured for driven tools, and equipped with a bar feeder. The machine has 18.600h running hours. Scope of delivery / Accessories: Clamping devices: + 15x collets SK42 (for Hainbuch Spantop Nova) + Manual wedge bar chuck (like new) with various jaw sets (Rota-S-plus) + Various jaw sets for pneumatic chucks (Graber) Tool holders (Driven tools): + 1x double holder for main and sub-spindle + 3x axial for main spindle Djbev Htkqs Hh H Tvskl + 3x radial + Approx. 15x various holders for boring bars and turning tools Additional accessories: + Hydrobar bar feeder for 1.5m bars The machine is in good condition and can be inspected under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 42STM-5 | 42STM | 42STM5 | 42 S TM-5

Condition: used, Year of construction: 2006, greates pass round over bed 960 mm swing diameter over bed slide o: 860 / u: 730 mm turning diameter over bed slide o: 860 / u: 400 control SIEMENS - 840 D forward bearing diameter 200 mm CNC Turning- and Milling Center | HEYLIGENSTAEDT - HEYNUMAT 24 UK-2 / 2000 equipped with a turret for driven tools as well as tailstock. The machine is in a well-maintained condition and Dsb Hhjvfxmhe H Tvokl can be inspected at any time under power. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: HEYNUMAT 24 UK | HEYNUMAT 24-UK | HEYNUMAT 24 UK 2 2000

Condition: used, faceplate diameter 4.000 mm travel -x axis 4.500 mm travel -z axis 600 mm control Siemens Sinumerik 840D-sl feed range 0 - 8.000 mm/min turning speeds 1) 0,7 - 5,6 U/min turning speeds 2) 2,8 - 22,4 U/min turning speeds 2,1 - 56 U/min tool taper Sauter Facing Lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Dkjbjhwgn Eo Hh H Tvel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08

Year of construction: 2005, Condition: used, control Siemens 840-D tool taper HSK & VDI 40 - - - - - - - - - Vertical Turning Machine | EMAG - VTC 250 DUO ED Dksbjh Nhlte Hh H Tvsl with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets, - 6-station end-processing turret with HSK tool holder, - 12-station disc turret for driven tools and VDI 40 tool holder, - 12-position disc revolver with cross slot and VDI 40 tool holder, - NC - clamping head, - NC bezel, self-centering, - EMAG hydraulic double-piston clamping cylinder, - tailstock down, - Hydraulic double-piston clamping cylinder at the top, - chip conveyor, - Knoll plant 1.500 l, - Coolant supply 7-30 bar, - OP20: shaft chuck with retractable jaws and face drivers, - Tool holder with Capto 5, - Artis quick-change system for tool and process monitoring, - Tool pack is included, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO

Year of construction: 2007, Condition: used, control Siemens 840-D tool taper HSK & VDI 40 - - - - - - - - - Vertical Turning Machine EMAG - VTC 250 DUO DD with ITC (7-30 bar) and driven tools Additional equipment: - Workpiece grippers on all 3 turrets - 12-position disc turret for driven tools and VDI 40 tool holders, - 12-station disc turret with cross-slot and VDI 40 tool holders, - 12-station disc turret for driven tools and VDI 40 tool holders, - NC steady rest, self-centering, - headstock below, Dkjb Hsh Nhlwjh H Tvol - tailstock below, - chip conveyor - Knoll unit 1.500 l, - OP10: Three-jaw chuck Rhöm KFD-N 220/3, - OP20: Hainbuch Spanntop pull-back BZI65, - Live tool for axial and radial machining, - Tool holder with Capto 5 quick change system, - Artis as tool and process monitoring, The machine is in a well-maintained condition. A machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VTC250 | VTC-250 | VTC250DUO | VTC-250 DUO