Used Milling And Boring Machine for sale (95,540)

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Gkedeu Dahnopfx Afijc Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: used, Year of construction: 1978, Droop and Rein LFAS130KE Milling Machine Axes: X (Table travel) 3,000 mm, Y (Cross-Rail vertical travel) 1,000 mm, Z (Milling Head Saddle on Cross-Rail travel) 1,500 mm, U (Boring Bar vertical travel) 300 mm. Axes Feeds: X min 20 mm/min, max 2,000 mm/min; Y min 20 mm/min, max 2,000 mm/min; Z min 20 mm/min, max 2,000 mm/min; U manually. Note: The X, Y, Z axes are equipped with linear encoders. On the control panel there is a display unit (DRO) for the X, Y, Z axes. For the U axis, direct viewing on a graduated ruler is used. Moving Table Load: max. 20,000 kg/m (uniform distribution on table surface). Moving Table usable surface: 4,000 × 1,600 mm. Moving Table total surface: 4,900 × 1,600 mm. Distance between Table and Cross-Rail: max. 1,200 mm. Gsdpfx Asxnc N Ijfiekc Machine Weight: approximately 50,000 kg. Overall Dimension of the Machine: L × W × H = 10,000 × 5,000 × 5,300 mm. Machine was made by DROOP & REIN, Germany, in 1978. Accessories include a 4-position at 90-degree Milling Head. Retrofitted in 2000 Coolant System: Yes. Not functional.

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. Gjdeh U Nvkepfx Afiskc SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: used, Year of construction: 1992, Technical details: spindle diameter: 100 mm x-travel: 1500 mm y-travel: 1450 mm z-axis: 930 mm w-axis: 506 mm B-axis (table): 360 ° control for program: HdH TNC 407 tool taper: SK50 number of spindle speeds: 5 - 1.600 / stufenlos table load: 4,0 t Gjdpfsu Idqbsx Afiokc table-size: 1100 x 1400 mm table rotating: 360 ° feed steps: X/Y/W/Z-Achse: 2 - 2000 mm/min Rapid feed X axis: X/Y/W/Z-Achse 5000 mm/min. total power requirement: 40 kW dimensions electric cabinet: 2000 x 600 x 2000 mm machine dimensions LxWxH: 4,9 x 3,7 x 3,8 m weight of the machine ca.: 14 t CNC drilling-milling machine with hydraulic power unit. Working paths from the table: X-axis table transverse 1500mm W-axis table longitudinal 1000mm 9x T-slots according to DIN 650 Equipment: measuring probe electronic handwheel hydr. weight compensation Y-axis universal milling head And some accessories, ask for them! i.D. *

Condition: good (used), Year of construction: 1995, functionality: fully functional, Control: SIEMENS 840D Solution Line (electrical overhaul 2017) x-travel: 7.000 mm y-travel: 2.100 mm z-travel: 1.500 mm z-travel vertical: 1.200 mm Universal milling head (orthogonal design) Swivel range of milling head holder: 340 °Grad Swivel range of milling head: 180 °Grad Mounting cone for tools with steep taper: SK50 spindle truning speed range: 22 - 2.240 U/min Feed rate x,y and z-axis: 2 - 12.000 mm/min Rapid traverse rate x,y, and z-axis: 12.000 mm/min Drive power 100% ED / 60 % ED: 31,5 / 39 kW Gkedpexmiplofx Afiec Clamping plate dimensions of clamping plate: 6.000 x 1.500 x 300 mm Number of T-slots: 6 T-slot distance: 250 mm max. load: 10 t/m² Equipped with: NC dividing head PEISELER AWU 650 with vertical faceplate, diameter 650 mm automatic universal milling head, orthogonal, (Completely refurbished 2017, rarely used since then) SIEMENS electronic handwheel 3 support tables various prism support blocks MAYFRAN hinged belt conveyor Coolant system with paper belt filter Work platform moving in the X direction, protective cover with viewing window The machine is in exceptionally good condition and can be viewed while under power. In 2017, a new SIEMENS 840D Solution line control system was installed, all drive motors and the control cabinet were replaced at the same time.

Condition: refurbished (used), Year of construction: 1974, Forest CNF 160 CNC Boring and Milling machine (1974, retrofitted in 2004) Machine – CNC Axes: X (Column Saddle travel) 12,500 mm, Y (Headstock Saddle Vertical travel) 3,500 mm, Z (Boring Shaft travel) 1,250 mm, W (Quill travel) 1,000 mm, W+Z (Cumulative travel) 2,250 mm. Rotary Table – CNC Axes: W2 (Table travel) 3,200 mm, B (Table rotation) 0–360°. Rotary Table Surface: 2,500 x 3,500 mm. Rapid Feed Axes: X max. 5,000 mm/min, Y max. 5,000 mm/min, Z max. 3,000 mm/min, W max. 3,000 mm/min, W2 max. 2,000 mm/min, B max. 1 rot/min. Work Feed Axes: X 1–2,000 mm/min, Y 1–2,000 mm/min, Z 1–1,000 mm/min, W 1–1,000 mm/min, W2 1–200 mm/min, B 0.1–1 rot/min. Milling Spindle Range (S – Gearbox with 4 mechanical ranges): Range #1 2.5–80 rpm, Range #2 80–160 rpm, Range #3 160–320 rpm, Range #2: 320 - 630 rpm. Boring shaft taper bore: ISO 50, Boring shaft diameter: 160 mm. FANUC 18M Contouring Numeric Control. FANUC made feed axes motors. FANUC made spindle motor. FANUC made drive system for axes and spindle motors. Overall size: W x H x L = 14,000 x 10,000 x 20,000mm. Machine weight: approx - 85,000 kg. Oil Chiller: Schimpke Model DK38-V from 1999. Coolant System: Yes. Chip Conveyor: No Gsdpfx Afoxnc Rleiskc

Condition: used, Year of construction: 1979, functionality: fully functional, feed length X-axis: 850 mm, feed length Y-axis: 280 mm, feed length Z-axis: 355 mm, overall weight: 6,100 kg, For sale is a Fritz Heckert FW 315 X1/2 milling machine from 1979. The machine is fully operational and is being sold based on offers. Gedswv T I Tspfx Afiekc Please submit your serious offer. Scrap prices or offers only slightly above scrap value will not be considered. Technical specifications: Year of manufacture: 1979 Rated voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Machine connected load: 8 kW Machine rated current: 19 A Incoming line fuse: 50 A X travel: 850 mm Y travel: 280 mm Z travel: 355 mm Spindle mount ISO: SK 40 Spindle head swivels left and right: 90° each Speed range: 28 - 1400 rpm Table clamping surface: 1070 x 270 mm Total weight: approx. 6.1 t (tons) Transport and loading can be organized Europe-wide upon request and for an additional charge. All prices are exclusive of VAT. Viewing is possible by appointment. Please contact us—our team will be happy to assist you. Part exchange or trade-in possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), functionality: fully functional, feed length X-axis: 4,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, spindle speed (max.): 3,000 rpm, table length: 4,000 mm, table width: 1,000 mm, CNC ECS 2301 (with the possibility of retrofitting) SPINDLE ISO 50 DIN 2080 taper AC motor: 28 kW (S1/100%) Constant torque from 0 to 250 rpm Constant power from 250 to 3.000 rpm Two automatic ranges TABLE (X-axis) Length 4.000 mm Width 1.000 mm Gksdpow Axmnefx Afisc Travel 4.000 mm Number of T-slots: 7 Width of slots: 18 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' HEAD (Y-axis RAM) Y-axis travel 1.000 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' VERTICAL CARRIAGE (Z-axis) Z-axis travel 1.500 mm Working feed rate 0 – 8.000 mm/1' Rapid feed rate 15.000 mm/1' COLUMN (W-axis) W-axis travel mm 1.300 Working feed mm/1' 0 – 8.000 Rapid feed mm/1' - 15.000 ACCESSORIES: 40-position tool magazine

Condition: good (used), Year of construction: 1981, Ref. -No.: 10447 Manufacturer: SKODA Type: WD 200 Year of construction: 1981 Retrofit: 2010 Type of control: CNC Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 9000 mm Y-Travel: 4000 mm Z-Travel: 1450 mm W-Axis: 2000 mm Bed width: 2000 mm Bed height: 550 mm Spindle Diameter: 200 mm Quill Stroke: 1600 mm Rotary Table (Lxw): 4000 x 4000 mm Table Load: 80000 kg Clamping Area: 3000 x 3000 mm Turning Speeds: 257 - 2570 RPM Gksdew Upfdepfx Afijc Spindle taper: 120 Automatic feeds: 342 mm / rev Spindle Turning Speed - Stepless: 1,5 - 630 RPM Max. Torque On The Boring Spindle: 20000 Nm Rapid Traverse: 16000 m / min Drive Capacity - Spindle Motor: 9,8 - 35,5 kW Total Power Requirement: 75 kW Bore Depth: 2000 mm Vertical headstock movement on the column: 3150 mm transverse movement of the stand on the bed: 4000 mm Lowest position of the spindle axis above the bed: 1100 mm Spindle speed when moving the quill forward: 1,6 - 300 max. rpm Drill feeds (spindle, quill) continuously variable in the range: 1,6 - 1600 mm / min Milling feeds (headstock vertical, column horizontal) infinitely variable: 1,6 - 1600 mm / min Machine length: 11350 mm Machine width: 5450 mm Machine Height: 7350 mm Weight Of The Machine Ca.: 65 t Further information: Threading: 22 metric threads, pitch range 0.5 - 12mm 32 Whitworth threads, pitch range 28 - 1 (gears) Accessories: - console for tools - 1 set of operating tools - ejector and fastening wedges for spindle - lubricating press - 1 set of spare parts for electrical equipment - clamping base plate - setting stick with electrical equipment Machine can be inspected under power by appointment.

Condition: used, Technical details: spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 2000 mm control for program: TNC Heidenhain 320 B-axis (table): ja W-axis (spindle longitudinal): Planschieber mm tool taper: ISO 50 table-size: 1400 x 1250 mm machine dimensions LxWxH: 8,0 x 6,0 x 4,5 m Gedpfou Idp Djx Afijkc weight of the machine ca.: 28 t with face slide 700mm , electronic hand control *

Condition: used, CNC Travelling Column Drilling and Milling Machine ANAYAK Type HVM-3800-P Bed milling machine, design similar to a plate boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 Travel (X/Y/Z): 3200 mm / 1200 mm / 1500 mm Table size: 3800 x 1200 mm T-slots: 8 pieces, 22 mm width, 130 mm pitch Table load capacity: max. 25 tons (fixed table - virtually unlimited load) Spindle taper: ISO 50 (DIN69871-A) (drawbar DIN 69872-B) Spindle speed: 60-4,000 rpm, infinitely variable Feed rate: up to 10,000 mm/min, infinitely variable Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Power supply: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head, fully automatic swivelling in two 45° planes - B+C axis - HEIDENHAIN iTNC 530 control, with electronic handwheel - Prepared for wireless measuring probe (probe and receiver not included) - Additional HF spindle 18,000 rpm - for mounting - Free-standing electrical cabinet - Chip conveyor positioned between the travelling column bed and machine table - 32,078 operating hours recorded - Coolant system - Free-standing hydraulic power unit - Operating manuals with circuit diagrams Machine footprint: L x W approx. 1,000 x 700 cm Machine height: approx. 410 cm Weight (complete): approx. 33 tons Good condition Available immediately, ex location Kassel, loaded free of charge Gedpfsxcgtgox Afiokc

Condition: good (used), Jig boring/Milling machine HAUSER 3DR Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Gedpfeiix Ipox Afiokc Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Condition: new, Year of construction: 2025, neu 2025 030138 Oktober 2025, Zwischenver Deutschland 3360.75 € 13 mm MK 2 220 mm 40 - 4000 U/min 0,54 (230 V, frequenzgere kW M 10 (steigungsabhängig) 520 mm 400 mm 850 mm 62 kg 60 mm 85 - 370 mm 420 mm 300 x 250 mm 70 mm Continuous/normal drilling performance 13/15 (in E335/ST60), 12 Nm Manual feed Digital speed and drilling depth display Thread cutting device Control panel with OLED display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Gkjdpfxoxcbhre Afisc Quickly adjustable and ergonomic drilling depth stop Continuous speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drill protection with electrical protection Connection cable with Schuko plug OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: used, Year of construction: 1995, SECOND-HAND END-CUT OFF BORING AND MILLING MACHINE BACCI MOD. TTF1 - CE RULES - Volt. 380/50 - S/N 333 - Year 1995 Gsdpfx Afemxfhmsijkc

Condition: used, Year of construction: 1980, spindle diameter 105 mm cross travel of table 1600 mm vertical adjustment of drilling slide 1600 mm longitudinal movement of column 1000 mm spindle stroke - max. 600 mm spindle taper ISO SK 50 spindle turning speed range 6,3- 1600 U/min table surface area 1120 x 1120 mm spindle motor 45 kW voltage 400 V feeds x/y/z -stepless 0 - 5000 mm/min rapid travel x/y/z 10 m/min table load 6 t table rotation 360 ° Gkjdpfx Asu Rt Inefijc total power requirement 82 kW weight of the machine ca. 18 t dimensions of the machine ca. 4,8 x 4,9 x 4,2 m Machine was complete reconditioned and retrofitted with Siemens 840 D control in 2008 for a price of 400.000,- Euro ! Machine has a 40 position ATC, 5 CNC axes with ball screw drives (X,Y,Z,W,B), housing around machine with safety doors, cooling arrangement built in 2020 and new spindle drive Siemens built in 2008.

Condition: used, Year of construction: 2009, spindle diameter 125 mm x-travel 1.500 mm y-travel 1.250 mm z-travel 1.000 mm w-travel 550 mm table surface area 1.000 x 1.250 mm workpiece weight 6.000 kg quill stroke 550 mm tool taper ISO 50 number of spindle speeds 5-3.700 U/min. max. torque 2012 Nm feed speeds 1-6000 (x-Achse) mm/min Gksdpfx Ajwdta Eofioc feed speeds 1-6000 (y-Achse) mm/min feed speeds 1-6000 (z-Achse) mm/min rapid traverse x/y/z 15/ 15/ 15 m/min dimensions of the machine ca. 7,51 x 5,07 x 3,33 m 63 kVA Equipment/ Accessories: - CNC control Siemens 840 D - 60 ATC - Coolant system with high-pressure pump 30 l/min.- 20 bar - documentation

Condition: used, Year of construction: 1999, Technical details: spindle diameter: 125 mm x-travel: 3000 mm y-travel: 1600 mm z-axis: 1500 mm w-axis: 600 mm table surface area: 1200 x 1500 mm table load: 6 t spindle taper ISO: 50 spindle turning speed range: 5 - 2500 U/min spindle drive motor: 22 kW total power requirement: 60 kVA Gksdovm Aauepfx Afiec weight of the machine ca.: 28 t dimensions of the machine ca.: 7,0 x 5,4 x 4,4 m CNC HEIDENHAIN TNC 430 spindle support bearing automatic toolchanger 60-pockets chip conveyor and coolant attachment measuring probe *

Condition: used, Year of construction: 1988, control Heidenhain 355 Gksdpfof Tdvbjx Afisc tool adaptor SK50 weight of the machine ca. 8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 2003, 🔧 FOR SALE – DEBER MDM6 Milling Machine 🔧 Gkedpfx Aew Hy Dcjfiec 📍 Immediately available: a machine in excellent condition, ready to join your workshop! 📌 Main features: ✅ Brand: DEBER ✅ Type: milling machine ✅ CNC: SELCA ✅ Model: MDM6 ✅ X-axis travel: 6,000 mm ✅ Y-axis travel: 1,000 mm ✅ Z-axis travel: 2,200 mm ✅ Table dimensions: 7,000 x 1,500 x 330 mm ✅ Spindle: ISO 50 – 28 kW ✅ Chip conveyor ✅ Automatic head TA2 ✅ Year: 2003 📸 See photo below (machine can be inspected on site) 📦 Condition: Very good 💰 Price: on request 👉 Please do not hesitate to contact us for more technical information, additional photos, or to arrange a viewing.

Condition: ready for operation (used), Year of construction: 2002, 1 GOGLIO MX 60 moving column milling machine from 2002 CNC SELCA 4045D X 6000 Z 1800 Y 1100 Fixed table 6000 x 2000 Automatic head 1°X 3° Gkedowxacvopfx Afisc Speed 3000 rpm - 24 kW Through-spindle coolant 20 bar ATC 40 tools ISO 50 Chip conveyor Still in operation at the customer

Condition: used, Year of construction: 1995, tool adaptor SK 40 weight of the machine ca. 2,3 t Gkodonl Nq Ujpfx Afioc x-travel 800 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, 1 FPT AREA -M mobile column milling machine from 2003 CNC HEID. TNC 426-M Gedpfjww Nhfox Afiskc X 24000 Z 3000 Y 1250 Spindle speed 4000rpm - 37 KW - ISO 50 automatic indexing head, 144 positions center spindle coolant 20 bar ATC 60 positions rigid tapping chip conveyor machine visible in operation in ITALY

Condition: used, Year of construction: 1990, x-travel 1600 mm ja Gkjdpfx Afswlvtdjisc weight of the machine ca. 13,7 t

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm z-travel 500 mm Control Heidenhain Gjdpsuxfz Asfx Afiokc total power requirement 16 kW dimensions of the machine ca. 5 x 4,2 m

Condition: used, Year of construction: 1979, spindle diameter 80 mm ja facing slide ja Gedpfowhq Dvsx Afiskc Ja weight of the machine ca. 8,8 t