Used Set of holes drilling machines for sale
4
with interchangeable drilling bar 26 mm grid
second hand
Made by Scheer
Type DB 20
Machine no. 400772
Iw7jrlc8k
hydraulic feed brake
Number of spindles 21 + 27
Number of drilling beams 2
Drill from above
Grid 21 x 32 mm + 27 x 26 mm
Mechanical tensioner 2 pieces
Stop ruler 2000 mm
Pneumatic locking pins
Space requirement approx. 1500 mm x 1000 mm x 1600 mm
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the current condition as viewed,
without overhaul,
without guarante...
2
Used machine
Year of manufacture: 1922
hole line boring head 9 spindles from above
spindle distance 32 mm
Horizontal boring head 5 spindles
spindle distance 32 mm
Availability: short term
Location: Solingen
Ehgj9av
7
10
The machine is technically in order.
7yc33s0
The stop system is included as well as 5 mm drill for the shelf supports
Visually, the machine is absolutely not beautiful.
The Ganner was years next to the door to the paint room and has got quite a bit of paint.
The machine has certainly stood around unused for years.
10
Hole boring machine for wood make CASATI MACCHINE type HF/Super
Technical data:
Drill head vertical / drill beam with 13 drills.
Fq7khaj
Drilling direction from above
drilling depth 60 mm
Stroke vertical 150 mm
Drill beam can be swivelled forwards by 90
Hole grid distance center-center hole 32 mm
Motor power drill motor vertical 2 HP
Drill head horizontal with 3 drills
Stroke horizontal 130 mm
Drilling direction from back to front, fixed
Hole grid 32 mm
Work table size 2000 x 450 mm
Drilling tab...
2
Pitch 32 mm
Motor output 1,5 kW
Clamping height max. 100 mm
Number of spindles 19 St.
Schleicher Unidrill 19
-----
for carcass, frame, fittings and hole line drilling
Technical specifications
B9i8y98k
-----
Working width: 630 mm
Maximum portal passage: 690 mm
Clamping height: 100 mm
Adjustment range of the boron unit: 75 mm
Drilling stroke: 120 mm
Motor: 1.5 kW, 380 V, 50 Hz
Gear: 19 spindles, division 32 mm (10 clockwise and 9 counterclockwise)
Spindle distance: min. 32 mm / max. 576 mm
Spi...
12
CATALOG NUMBER 6548
TECHNICAL DATA
- number of spindles 8 pcs
Hezoktvw
- max tool diameter 13mm
- minimum spacing of extreme spindles mm
- any spindle spacing: front / back, left / right
- table surface size 600x1500mm
- height to the table surface 910mm
- working stroke of the table 100mm
- pneumatic and manual up / down table adjustment
- main engine 2 × 2.2kW
- dimensions length / width / height 1680x1170x1650mm
- weight 452 kg
ADVANTAGES
- Polish production
- the ability to work on the lef...
3
4
10
FELDER FD 969 Digit
Year 2012
Total power: 4,6 kW
drilling heads: 2 x vertical + 1 x horizontal
spindles per drilling head: 23 pcs.
Distance between each spindle: 32 mm
The two vertical drilling heads can each be rotated by 90°. (see last picture - possible application examples)
max. clamping height: 62 mm
max. workpiece size: 3.000 x 920 x 80 mm
distance between the 1st and the last spindle: 704 mm
min. distance between drilling heads: 150 mm
max. distance between drilling heads: 920 mm
max. dr...
3
Gannomat hole line drilling machine with new drill and spare drill bit
B7htqukflq
5
Pitch:32 mm
Motor output:1,8 kW
G0ti00n
10
2 drilling beams with 21 spindles each with pitch 32 mm,
B9u27o2itq
Position adjustment drilling unit 0 - 650 mm,
Drill hole rows min. 190 mm spacing,
spindle speed 2.800 rpm.,
shank diameter of drills D = 10 mm with clamping surface,
clamping height of workpieces max. 70 mm,
2 motors with 1,5 kW each, 400 V, 50 Hz.,
working height approx. 850 mm,
compressed air connection 6 bar,
1 fence ruler right with base cabinet,
1 stop ruler left
Space requirement without fence approx. 850 x 1.100 mm,
!!!D...
2
5
BLUM MINIPRESS Hinge Drilling Machine
Zi99vlnr
Model M51N1000
Number of drill bits 5
Mounting of drills with quick couplings
Motor power 0,75 kw
Two pneumatic clamps
Pneumatic stroke
Maximum thickness of machined material 40mm
Table under the machine free of charge
Year 1994
6
Drilling machine Weeke
type PE 77
machine-no. 1439
year of construction 1978
working length max. 2600 mm
working width max. approx. 570 mm
4 drilling beams from down
2 drilling beams from the side (1 right/1 left)
length of each drilling beam is 570 mm
with 18 drills in 32 mm distance
with middle support bars
B9ljdv3qcb
with safety-switch-off-rope
each drilling beam single controllable
machine size approx.
L 3800 mm x W 1500 mm x H 1600 mm
8
Blum Minipress Hinge drilling machine.
B9izv2aadq
5 drill bits.
Pneumatic clamps.
0.75 kw, 380V
No air leaks, works perfect.
8
heads set: right/left/top/top
spindles span 32mm
motors 1,1kW
heads with 5 spindles
2t8cji
max heads span 2,5m
pneumatic clamps
regulation of drilling speed
8
Throughfeed drilling machine RILESA ST
Year of production 1997
The machine drills in the X axis from the top
B82r8mg7nw
The machine has a magazine
Simple reliable design of spindles on straps
It has 48 independently adjustable spindles
driven by 8 engines, 1.1 kW each
Workpiece length 250 - 2500 mm
Workpiece width 20 - 250 mm
Drilling depth 10 - 85 mm
5
6
Hole line drilling machine MAW BM 500 with 32 mm pitch for drilling single holes or hole lines with pneumatic stroke.
- Pitch: 32 mm
- stroke max. approx. 80 mm
B37m0i22xj
- motor: 1,6 kW
- 7 spindles
- Incl. many drills.
6
number of drilling beams 1
number of spindles 19 pieces
spindle distance/grid 32 mm
Drilling from below
swivelling manual
hydraulic feed brake
working width approx. 700 mm
drilling depth 95 (110) mm
drill holder D 10 mm
pendulum stops
work piece clamp 3 x
total connected load 1,5 kW
space requirement approx. 1200 mm x 1000 mm x 1200 mm
weight approx. 300 kg
Depxn8okg
Advise used machines:
• Technical data without obligation, mistake and intermediate sale reserve.
• Price is considered ex-lo...
7
Hole line boring machine Bohrmatic
Year of manufacture 1976
2 x 21 spindles + 21 spindles horizontal
3 mm and 5 mm drills
Bzzwdqkyfb
cup band drill 35 mm
16 mm fitting drill
380 volt
6
6 heads
regulation of span between spindles
table lifted pneumatically
pedal control
motors 2x2,2kW
spring pressure of material
B8ryf9j0i3
table dimensions 870x670mm
3
1 piece drilling beam 21 drills, grid system 32 mm32 mm
max. travel of the drilling beam min. 22 mm to max. 624 mm
Row spacing min. 125 mm , max. 603 mm ( drilling line )
Engine4.4 kW
Drill stroke 98 mm
Oil brake cylinder with stroke 70 mm
Operating pressure approx. 6.0 bar
Air consumption approx. 3 l/cycle
Traverse path from min. 20 mm to max. 650 mm
Weight approx. 540 kg
Dimensions : 2500 x 1100 x 1700 mm
Gwahso
The machine is still being reconditioned and checked for function
condition very g...
2
3
Double sided line boring machine
Bkqr7wwo7b
2 drilling motors à 1,8 kW with oil brake cylinder
stroke max. 130 mm
with pneumatic reversing valve
21 spindles, spindle pitch 32 mm
drilling distance max. 640 mm (by shifting the workpiece max.
workpiece max. 2656 mm)
portal passage 850 mm
Air consumption at 5 atü approx. 11 litres per cycle
Suction nozzle 160 mm
machine dimensions approx. 3100 x 1100 x 1800 mm
Weight: approx. 350 kg
4
Scheer DB 22 Hole row drilling machine
Machine is fully functional.
For more information, please contact us.
Jvcine
12
Row hole and dowel hole drilling machine
Combi RB 110
Year of manufacture: 1984
working width: 850 mm
number of spindles: 21 pcs.
Pneumatic clamp 4 pcs.
1x drilling from below swivelling pneumatic working width 800 mm
1x drilling front side
Bviknrg3as
Clamping depth 80 mm
Drill holder D 10 mm
Raster 32 mm hole line drilling device
Total connected load: 1,5 kW
space requirement: L 1.200 x W 900 x H 1.200 mm
Weight approx.: 400 kg
5
regulation of span between drills
manual regulation of start position
B8rxn00ssl
6 spindles
table dimensions 1800x600mm
support regulation up/down
three motors 2,2kW
2
Gannomat line drilling machine
26 drilling spindles incl. drills
Brake motor for drilling holes
pneumatic clamping of the depth stop
9in93
10
6
21-shafts, Division 32 mm
3xxo0pu9t
Chuck M 10 thread
Spindle distance of to 640 mm
Portal passage of 1056 mm,
Stroke length of 2500 mm with 4 pivoting attacks
Drilling unit with motor 2,2 kW
Drill head swivel, bottom boring
Height of 80 mm
Drilling depth of 80 mm
4
Double line and fitting drilling machine in SYSTEM 32.
Line boring machine with 2 drilling units each with 25 precision drilling spindles.
Short introduction:
• Row of holes as well as line drilling in the SYSTEM 32 mm
Grt8ihp
• 50 (2 x 25) holes in one drilling cycle
• Drilling depth correction for different drilling depths
• Massive precision drilling unit from GANNOMAT
• Furniture connector and hinge drilling (option)
• Optional 3rd drilling unit
3
4
NC controlled line drilling machine for high capacity production
with 1 or 2 drilling untis each with 76 drilling spindles.
Short introduction:
• Row of holes as well as line drilling in the SYSTEM 32 mm
• 76 or 152 (2 x 76) holes in one drilling cycle
• Drilling depth correction for different drilling depths
• Massive precision drilling unit from GANNOMAT
• Line drilling machine for high capacity
Bcpilwigrz
1
Second-hand machineYear of construction: 1993Condition: well-maintainedDesign:fully automatic pneumatic control with foot valve clamping-drilling-unclamping, electric intermittent operation. 2 drilling units adjustable with 2 drilling beams 15-spindles; pitch 32 mmquick change chuck for drills as standard1 program gauge for position adjustment of the drilling units with 3 crosscut stops1 basic ruler 800mm1 extension ruler 1500mm5 drop-in stops 1 adjusting gauge for hole lineAvailability: short t...
Used Set of holes drilling machines
Search Machineseeker now with more than 200,000 used machines:This may be of interest to you
How to receive 100% of our e-mails
Morlock Motors official partner of Machineseeker and Truckscout24
10 valuable tricks for buying used machines online
Photo gallery: The World's 10 biggest excavators
Machineseeker still biggest sponsors of 2nd German football league
Sample sales contract for used machines in nine languages
