Condition: new, SCM gabbiani p90 panel dividing saw - exhibition machine - special price! Technical data: Saw blade projection mm 90 Worktable height mm 950 Number of collets 5 as standard CUTTING DIMENSIONS mm 3300 x 3200 Variable saw carriage speed m/min 6 - 60 Variable pusher speed m/min 0 - 60 Saw blade motor power kW 7.0 Speed rpm 4650 Saw blade diameter mm 340 Saw shaft diameter of main saw blade mm 80 Scoring motor power kW 1.5 Speed rpm 5850 Scoring blade diameter mm 200 Scoring blade shaft diameter mm 80 Compressed air requirement NL/min 300 Compressed air bar 7.0 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Suction nozzle diameter mm 4x120 including the following options: 590134 Cutting depth 3200 mm (version 33) OF0263 eye-M control panel with integrated PC 590261 Cut editor OF0454 Maestro pattern 590271 Maestro connect: preparation without "gateway" for subsequent installation OF0457 Human-machine interface software (HMI) MAESTRO ACTIVE 590258 Rear table with castors, on the side of the longitudinal stop 590246 Fixed air cushion table 2500x800 mm with castors and reinforced fan 590239 2 x movable air cushion table 1500x600 mm with castors and reinforced fan 590244 Saw carriage with independent stroke control of the saw and scoring saw blade 590245 Optimized vertical stroke of the saw blade on 2 levels (medium/maximum) Dsbujiz A Ams S Tr Hskl 590143 Device for grooves with manual height adjustment of the saw blade 590241 Execution of grooves (feed/return of the saw carriage) 590164 Double lateral automatic aligner 301230 Foot switch for starting and stopping the work cycle 590044 Compact labeling unit - printing of labels with barcode 590144 4 x additional clamps 900088 Magnetic tape monitoring of the pusher position 102015 European safety regulations (CE mark) 109993 MACHINE LANGUAGE: German

Condition: used, Year of construction: 1980, Partially overhauled, fully adjusted With completely new control/circuit board Main switch Brake device with automatic star-delta start Emergency stop button Used, good condition Brand Altendorf Type F45 Year of manufacture 1980 Machine no. 80-8-35 GS-tested Motor 5.5 kW Carriage length approx. 2800 mm Cutting width approx. 1200 mm Pivotable up to 45° Parallelogram guard Single miter stop Extraction connection D 80 and 120 mm Space required approx. 2800 mm x 1600 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Dkebujv Tqrfj S Tr Hol Handed over in as-is condition, as seen, without guarantee or warranty

Condition: excellent (used), SCM M3 multisaw track width 300mm max cutting height 120mm 37KW engine track feed smoothly adjustable Dkobuewgiqxo S Tr Hjl central lubrication track in good condition machine ready to work,

Condition: good (used), Year of construction: 1990, operating hours: 2,500 h, Functionality: fully functional, cutting height (max.): 350 mm, total length: 6,500 mm, Hello, I am selling a Schumacher 35/2S line, good condition, the machine was used in a small plant, good condition, electrics and mechanics ok, the machine is ready to work, material length max 6500mm Dsbu S Trov Nzu Ne Hjkl

Condition: good (used), Cutting area approx. 5200 x 2100 mm Dkebowduamju S Tr Hjl Manual feed Automatic deflection grate Cutting depth 70/80 mm Further technical data available upon request

Condition: refurbished (used), Hydraulic variator, e.g. for the feed drive of a PRIMULTINI band saw clamping carriage, including brand-new drive motor 5.5 kW/1440 rpm, individual, manual rapid feed adjustment forwards/backwards including by-pass valve for smooth reversing when accelerating and braking the clamping carriage, with ATOS electric solenoid valve for fast and safe feed-off switching, with 280 mm Ø V-belt pulley Dkobuslyqbbo S Tr Hsl

Condition: reconditioned (used), Veneer saw / fine-cutting saw Consoles for rear support table Dksbuov D I Uxj S Tr Hel Pneumatic pressure beam control Extraction channel Cutting length 3050 mm Cutting height approx. 50 mm Motor power 2.2 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 3800 x 1000 x 1200 mm Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 2024, machine/vehicle number: L24100210, Neue Ausstellungsmaschine! Besonders schwere Ausführung mit hohem Eigengewicht für maximale Laufruhe • Besonders ruhiger und präziser Lauf dank verwindungssteifem Maschinengehäuse • Großer Guss-Parallelanschlag mit Rundstangenführung, leicht verschiebbar • Guss-Schwungräder mit Gummibelag und Reinigungsbürste •Großer Grauguss-Sägetisch, schwenkbar mit geschliffener und polierter Oberfläche • Präzise Schnitthöhenverstellung über Zahnstange mit Millimeterskala • Endschaltergesicherte Türen • Selbstbremsender Motor • Zwei Absaugstutzen Techn. Daten: Abmessungen Tisch (L x B x H) 720 x 520 x 860 mm Schnittgeschwindigkeit 1.650 m/min Gewicht ca. 240 kg Schnitthöhe max. 350 mm Schnittbreite max. 520 mm Sägeblattlänge max. 4.260 mm Sägeblattstärke min./max. 0,5 / 0,6 mm Präzisionsführung oben / unten Sägetischneigung 0 - 20 ° Abmessungen (L x B x H) 870x 620 x 1970 mm Dksbu Sewggake Tr Hol

Condition: excellent (used), Year of construction: 2008, operating hours: 697 h, Functionality: fully functional, cutting width (max.): 6,000 mm, cutting width at rip fence: 1,350 mm, cutting height (max.): 170 mm, saw blade diameter: 500 mm, table length: 3,000 mm, height adjustment type: electric, overall weight: 1,900 kg, type of motor: three-phase motor, slide length: 3,000 mm, rotational speed (min.): 2,800 rpm, rotational speed (max.): 5,500 rpm, type of input current: three-phase, input voltage: 400 V, pivoting range: 46 °, motor voltage: 400 V, power: 7.5 kW (10.20 HP), Equipment: motor brake, Selling a very well-maintained Martin T 74 classic sliding table saw. Dkebu S Trowgfuaj Hjl Price net plus VAT. Available approximately in 3 months at the beginning of August, once the new Martin T 77 is delivered. The following features: Digital display with tool management 7.5 kW motor Programmable parallel stop 3 m smooth-running edging table Parallelogram cross table with 2 digital stops Extension table 800 mm Electrically driven parallel stop, lowerable 1350 mm Central lubrication 3 speeds for saw blades up to 500 mm Motorized tilt adjustment from 0 to 46° Motorized saw blade height adjustment Max. cutting height with 500 mm saw blade: 170 mm Operating hours: see image: 697 hours

Condition: ready for operation (used), total height: 3,020 mm, total length: 3,300 mm, throat depth: 1,060 mm, total depth: 5,100 mm, zware dubbelkoloms lintzaag voor het zagen van hooggelegeerde staalsoorten automatische invoer van het werkstuk met automatische herpositionering CNC-gestuurde variabele snelheid voor invoer en zagen spaantransportband uitgerust met volledig gemotoriseerde Weisshaupt-rollenbanen: - 10,3 meter invoerrollenbaan (buiten) met 2 hydraulische klemmen voor het uitlijnen van het werkstuk - 9 meter invoerrollenbaan (binnen) met 2 hydraulische klemmen voor het uitlijnen van het werkstuk - maximale werkstukbreedte: 900 mm - elke rol is gemotoriseerd - de capaciteit van één rol is 4 ton - 4 meter uitvoerrollenbaan: één rollenbaan is uitgerust met een weegschaal om het werkstuk na het snijden te wegen (Sartorius-systeem) Max height of workpiece: 860 mm Sawspeed: 16 > 80 m/min Dksbev Sfp Aou S Tr Hel Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)

Condition: ready for operation (used), OMGA V113P double saw for frames, strips Specification: • condition - used • manufacturer - OMGA • model - V113P • two 300 mm diameter discs permanently set at a 45 degree angle each • total power 2.2 kW (2 engines of 1.1 kW each) • spindles fi 30 mm • pneumatic clamps • cutting cross-section ~ 100 x 130 mm • original painting • additional tables extending the tops by 100 cm (2 pcs.) • 1993 year of production • weight 225 kg • dimensions 80 x 142 x 132 cm cm (length x width x height) Additional information: • very good, factory technical and visual condition • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site Debjwgdgnju S Tr Hokl

Condition: excellent (used), Original PAUL roller tables in various widths and lengths, in standard or heavy-duty design for use in front of cross-cut, trimming and resawing circular saws, short work tables enable, for example, entry for transfer from the cross conveyor, passage through the table system or forklift loading of heavy beams or models, long work tables in various dimensions are also available Djbu Setv U Igo Tr Hskl

Condition: used, Year of construction: 2013, - Used machine - Year of manufacture: 2013 - Cutting length: 4300 mm - Cutting height: 2105 mm - Cutting depth: 60 mm - Motor power: 4.0 kW / 400 V Dsbov Iav Neu S Tr Hskl - LxWxH: 5720 x 1100 x 2865 mm - from site

Condition: excellent (used), Year of construction: 2003, Pressure beam for clamping workpieces up to approx. 80 mm thick. Particularly interesting for miter cuts and veneer trimming. For a secure hold of the workpiece on the sliding carriage. For 300cm long sliding table or longer. Maximum clamping length approx. 290cm The pressure beam can be mounted on the newer machines with steel guides, but also on machines with Pertinax guides. The pressure beam is divided into two parts and can be controlled separately. The saw in the photos is of course not for sale. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this vendor". Dksbu Ssu Ivyno Tr Hol

Condition: not inspected (used), Year of construction: 2005, Functionality: unexamined, cutting length (max.): 4,250 mm, saw blade diameter: 350 mm, cutting height (max.): 76 mm, cutting width (max.): 4,250 mm, main saw diameter: 350 mm, power: 15 kW (20.39 HP), Machine type: FXH 430-430 MCS-FLS Cutting length: 4,250 mm Cutting width: 4,250 mm Year of construction: 2005 Saw blade projection max .: 95 mm Saw blade diameter max .: 350 mm Main saw motor: 15 kW Scorer aggregate Automatic cutting length adjustment Grooving and rebating device Window cutting and grooving Package height max .: 76 mm Saw aggregate forward: 5 - 120 m / min Saw aggregate backward: up to 120 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 8 pcs grip push clamp Clamp opening: 90 mm Formatting device Short stroke for pressure beam Strip aligner before and after the pressure beam Air cushion tables: 3 pc(s). 2100 x 600 mm Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos) Dobusu Ia Ico S Tr Hokl

Condition: like new (used), Year of construction: 2016, cutting length (max.): 3,200 mm, cutting width (max.): 1,486 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, table length: 3,200 mm, total length: 3,400 mm, type of motor: three-phase motor, power: 7 kW (9.52 HP), SCM LINVINCIBILE Panel Saw Model: SI5 Max saw diameter: 550mm Screw diameter: 120mm Screw diameter with scriber: 450x120 Saw tilt: 0/46 degrees Max saw cut at 90*: 200 Max saw cut at 46*: 130mm 3 saw speeds: 2500/3500/5000 Rpm Saw motor: 7 kw- electric lifting - lowering / saw tilt Screw motor: 1.3kw- electronic adjustment of the scriber Max cut on the parallel guide: 1600mm Two suction openings: lower 120mm - upper 100mm Aluminum wagon: 3200mm- start -stop on the wagon Upper mobile control CompeX left guide with stops Additional guide for angles year: 2016 CE norm Dobu S Tjwgag Dor Hekl

Condition: used, Functionality: fully functional, rotational speed (min.): 3,200 rpm, rotational speed (max.): 5,000 rpm, power: 6 kW (8.16 HP), Equipment: motor brake, Circular saw for edging with scoring CASOLIN ASTRA Blade diameter 400 mm Dkjbowf R I Nju S Tr Hjl 3 rotations: 3200 / 4200 / 5000 3000 mm movable table Main motor 5.5 kw Electro brake on the motor In good working condition, ready for production

Condition: refurbished (used), hydraulic feed drive units, fully reconditioned, stepless variable; 1 unit for KME 2 or BM - left execution - incl. additional pump 1 unit for KME 2 or BM - right execution - without additional pump Dkjbsirmuleu S Tr Hol

Condition: good (used), Year of construction: 2005, Thin cut Lamella band saw, Dsbu S Trjwf Rv Hj Hskl 310mm wide Good condition 80mm bandsaw wide 18.5 kw motor

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, Cut-to-size saw with automatic swiveling saw blade Machine type: Panhans S45 Speed 420-320, Visioline Cutting length: 4,200 mm Cutting width: 3,200 mm Year of construction: 2011 Saw blade projection max. (0°): 72 mm Saw blade diameter max .: 350 mm Main saw motor: 14 kW Scorer aggregate Scorer saw blade diameter max .: 180 mm Scorer aggregate, manually adjustable Package height max. (0°): 60 mm Saw aggregate forward: up to 100 m / min Saw aggregate backward: up to 100 m / min Feeder: up to 120 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 6 pcs grip push clamp Regulation of clamp force at control desk stepless Number of stop jaw: 2 pcs Clamp opening: 82 mm Strip aligner before the pressure beam Air cushion tables: 3 pcs. 1800 x 600 mm Angular cutting device WSA Motor-driven cutting height adjustment for the main saw, infinately Automatic cutting length adjustment Grooving and rebating device Window cutting and grooving Dkobu S Tok T Aw Ssr Hol Formatting device This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: good (used), Functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 500 mm, overall weight: 350 kg, Cross cut machine OMEC SP400 Dksbsu U Arzsu S Tr Hol Saw diameter 400 mm 2 m left & 2 m right roller table 4 kW electrical engine

Condition: excellent (used), For circular saw ESTERER DKN or DKL with saw shaft 60 mm Ø, Dkjboib A Spsu S Tr Hsl for RIGHT MACHINE: 1 previously unused, movable blade flange or shifting bush with bearing, clamping nut and bearing housing, max. clamping length 100 mm, flange Ø 145 mm For LEFT MACHINE: 1 second hand in good condition, movable blade flange or sliding bush with new bearing, clamping nut and bearing housing, max. clamping length 100 mm, flange Ø 145 mm

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Cut-to-size saw with automatic swiveling saw blade Machine type: Panhans s45 420 Cutting length: 4,200 mm Cutting width: 3,200 mm Year of construction: 2005 Saw blade projection max. (0°): 70 mm Djbu S Treit N S No Hekl Saw blade diameter max .: 350 mm Package height max. (0°): 60 mm Package height max. (45°): 38 mm Main saw motor: 7,5 kW Scorer aggregate Saw aggregate forward: up to 60 m/min Saw aggregate backward: up to 60 m/min Feeder: up to 60 m/min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 7 pcs grip push clamp Number of stop-jaws: 1 pcs Air cushion tables: 3 pc(s). 1800 x 600 mm Angular cutting device (WSM) This machine is in very good conditions and works very well. The machine will be maintained, checked and tested in our company. Errors and alterations in the technical datas and informations excepted!

Condition: reconditioned (used), Year of construction: 2007, Functionality: fully functional, cutting length (max.): 4,300 mm, cutting height (max.): 80 mm, cutting width (max.): 4,300 mm, main saw diameter: 350 mm, power: 15 kW (20.39 HP), Machine type: fh4 430 HT220 ERB / MCS-Evolution Cutting length: 4.300 mm Cutting width: 4.300 mm Year of construction: 2007 Saw blade projection max .: 95 mm Saw blade diameter max .: 350 mm Main saw motor: 15 kW Djbuevw Tgaj S Tr Hjkl Scorer aggregate Scorer saw blade diameter max .: 200 mm Automatic cutting length adjustment Scorer aggregate, motor-driven adjustable Package height max .: 80 mm Saw aggregate forward: 5 - 120 m / min Saw aggregate backward: up to 120 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 2 pcs, dual clamp finger Number of clamps: 5 pcs, single clamp finger Clamp opening: 90 mm Strip aligner before and after the pressure beam Air cushion tables: 3 pc(s). 2100 x 600 mm Rollers at air flotation, 3 pcs This machine is in very good conditions and works very well. The machine is reconditioned, checked and tested in our company. Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: not inspected (used), Year of construction: 1999, Functionality: unexamined, cutting length (max.): 4,230 mm, cutting height (max.): 76 mm, cutting width (max.): 3,100 mm, main saw diameter: 370 mm, power: 15 kW (20.39 HP), Machine type: FMH 430-310 / MCS-F Cutting length: 4.230 mm Cutting width: 3.100 mm Year of construction: 1999 Saw blade projection max .: 95 mm Saw blade diameter max .: 370 mm Main saw motor: 15 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Automatic cutting length adjustment Package height max .: 76 mm Saw aggregate forward: up to 85 m / min Saw aggregate backward: up to 85 m / min Feeder: up to 80 m / min (Europe: forward 25 m/min acc. EN 1870-13) Debu S Tjq Edccor Hskl Number of clamps: 9 pcs. grip push clamp Clamp opening: 93 mm Strip aligner before and behind the pressure beam Air cushion tables: 4 pcs. 2100 x 600 mm Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)