Motor 400 v 2,2 Kw (3 HP)
saw blade diameter 300 mm
Cpehz0zq
cutting height 85 mm
Cutting length 380 mm
both sides 45° tiltable
one side 45° tiltable
nice underframe
Rung punch 12 mm
used, great condition
Make Schleicher
pneumatic feed
Sprout knife 12 mm
Support table on the right with stop slide
Support table on the left with stop slide
Gbdw29h9
Space requirement approx. 2000 mm x 600 mm x 1400 mm
Weight about 70 kg
Storage location 97447 Gerolzhofen, freely loaded, unpacked
Handover in the current condition as seen,
without guarantee and guarantee
Brevetti C15 double-bevel mitre saw
The machine is designed for cutting at an angle of 45°
Application in cutting: decorative frames, furniture door frames, glazing beads
Saw size max/min 276/250mm
Saw rotation speed 3250r.p.m
Motor power 2×1.5kw
Pneumatic material pressure 2pcs
Pneumatic feed of cutting unit
2x suction nozzle 100mm
Pxpoce
Machine prepared to work
We invite you to test
New machine
Year of manufacture 2022
Circular crosscut and miter saw
Machine for cutting to length as well as for horizontal and vertical
miter cuts
double miters are possible
the drive with saw blade runs in a guide arm with 4 ball bushings
which can be swivelled up to 45° on both sides for mitre cuts.
swivelling
for sharp miters the saw blade can be swivelled to the right under 45° up to
approx. 25° to the right
in addition, the saw head can be tilted to the left on one side from 90° t...
I sell the angular double mitre saw Brevetti Motta C15.
Pneumatic cut.
90° for frames cutting
Motors 3+3 kW
Bktmfryct2
Condition like new. Available immediately.
electric regulation of blade angle
max blade diameter 550mm
blade speed 3080 RPM
year 2006
Bb8holn3
automatic feeder
max cutting width 410mm
max cutting height 165mm
pneumatic pressure of material
* max cutting length - 282 cm
* min length of cut - 23 cm
* max cutting section - 130 x 100 mm ( at a right angle )
* motors 2 x 1.65 kW
* pneumatic movement of saws
* max diameter of discs - 300 mm
Cctnsvgut8
* cutting at an angle from -45 to +45 degrees ( right, left ).
* possibility to work only on one of the discs ( left, right or both at the same time )
* extraction stubs
* overall dimensions 360 x 100 x 140 cm ( L x W x H ).
The machine until the last days worked in a carpenter's...
No. 04333
Crosscut and miter circular saw GRAULE ZS 170 N
For wood, aluminum and plastics
used
This machine is used for cutting to length, as well as for horizontal and vertical miter cuts.
Double mitres are also possible.
The saw blade drive runs in a guide arm mounted with 4 ball bearings, which can be swiveled up to 45° on both sides for miter cuts.
For pointed miters, the saw blade can be swiveled to the right by between 45° and approx. 25°.
In addition, the saw head can be tilted on one...
New machine
Year of manufacture 2022
Motor 400 V / 5.0 kW
speed 2800 rpm
cutting length 420 mm
Cutting width 420 mm at 90
295 mm at 45°
Cutting height 200 mm at 90°
140 mm at 45
Saw can be tilted on one side up to approx. 25° to acute angles and tilted flat to the left up to 30°.
Saw blade-Ø 520 mm x 50 mm
suction nozzle-Ø 100 mm
Weight 250kg
With the following equipment options:
- HM circular saw blade 520x4,0/2,8 x 50 60 WZ for wood
Ce9yrodaff
- Machine can be tilted on both sides from the...
Miter saw, saw unit right left, double miter saw, cross-cut and miter saw, double end profiler
-Double miter saw: saw unit right and left from automatic saw, drill / mill Rapid DGL / BFA
-Motor: Himmel 3.0 kW / 2790 rpm
Bv890sg2ku
-Saw unit: swivels 45 ?
-Saw blade: O 410 mm
-Price / fee: complete
-Dimensions: 1060/760 / H680 mm
-Weight: 240 kg
Cleaned, function checked, test run
new valve installed
used,
manufactured by Omga
type TR 2 A
Masch.-No. 2872
2 saw aggregates
motors 1,65 kW / 2,2 PS
cut width 2800 mm
Bywi3bj9kr
cutting depth max. 155 mm / 45° 110 mm
cut height 90 mm
max. blade diameter 300 mm
tiltable manual
missle supports 1 piece
safety switching 2-Hand
pneumatic workpiece clamping each with 1 x
cylinder vertical
exhaust connection D 2 x 80 mm
required space ca. l x w x h
4000 x 1200 x 1400
weight ca. 500 kg
Storage locat...
Wegoma DS100 double head bevel saw machine
Cutting length max/min: 3260/500 mm
Heads adjustable at an angle of 0-45°
Maximum blade size 350mm
Right head movable left head fixed
Motor power: 2x 1.5kw
Disc rotation speed 2800 rpm
Two pressure cylinders
Tkfp9cph
3 additional element supports
Extraction spigot 2x80mm
CE-marking
year of production 2011
max. saw blade diameter 420 mm
Kcho0r
cutting height 170 mm
inclined at 45° 145 mm
cutting length 410 mm
with the following optional equipment:
-machine stand
-motor 3 kW
-machine can be tilted on both sides from the front via hand crank
Second hand machine
Year of manufacture 1994
with the 400 mm saw blade the machine is especially suitable for cutting large aluminum, plastic and wood profiles
standard hydropneumatic feed cylinder
both sawing units can be turned and tilted up to 45°. Thereby outside and inside dimension reading possible
aggregates can be locked at 90° as well as at 22,5° ud 45° left and right
The turntables are made of sturdy cast iron. Therefore highest precision in cutting
hardened and ground sliding g...
Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler
-Double miter saw: Saw unit right and left
-Saw unit: 45? pivotable
-Motor: Bauknecht 2.5 kW / 2850 rpm
-Saw blade: O 400 mm
-Price/delivery: complete
Bv2pkez27d
-Total dimensions: 1370/890/H710 mm
-Total weight: 250 kg
Double mitre saw Wegoma with drilling units
type: SD 25 E
year of manufacture: 10/94
new control with touchscreen approx. 2 years ago
working width max. 4000 mm
working width min. 230 mm
cutting height max. 260 mm
thickness max. 140 mm
sawblade diameter max. 500 mm
motor power each 2,5 kW
machine is in very good condition
dimension
5500 mm x 1700 mm x H 1900 mm
Oaqvb
weight approx 1600 kg
Catalog No. 6807
TECHNICAL DATA
- max disc diameter 350mm
- disc hole diameter 30mm
- pneumatic cutting (disc movement up/down)
Bic7tuwa
- max cutting height 100mm
- max cutting width 80mm
- 2 pneumatic clamps from the top
- 2 pneumatic clamps from the side
- pneumatic pressure 6 bar
- 2×1.5kW motors
- dimensions of the machine length / width / height 3000x800x1650mm
- dimension for transport length/width/height 1200x800x1650mm
- weight 381 kg
ADVANTAGES
- very good condition
- used saw
PRODU...
250700 STRIFFLER mitre saw,
Wamn0
45°.
New and used tools like planer heads, cutters and much more, as well as accessories can be found on our homepage.
Visit us, call us or send us a non-binding inquiry.
Brevetti C16 double-saw
Cutting width maximum 85 mm
Cutting height maximum 100 mm
Saw diameter min/max - 300/350 mm
Motors with power 2 x 1,5 kw
Blade rotation speed 3150 RPM
3skvgjy9
Extraction stubs 2 x 100 mm
Recommended pneumatic pressure 6 bar
Machine dimensions: 1020 x 820 x 1600h mm
weight 350 kg
* blade diameter 350 mm
Pyfw9ryx
* saw motor 2,2 kW
* max dimensions of the cut piece: 120 x 150 mm ( H x W ).
* own internal sawdust extraction
* guards on the saw for the safety of the saw operator
* cutting adjustment +/- 45 degrees
* very good technical and visual condition
* overall dimensions 70 x 70 x 165 cm ( W x L x H ).
You can find more photos in full quality in the link below:
drive.google.com/drive/folders/19cy68aWENb8hB2Mu8LhfPOtqZR6ikpjg ?usp=share_link
The machine until the la...
Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler
-Double miter saw: Saw unit right and left
-Saw unit: 45? pivotable
Bvxns9p9v0
-Motor: Bauknecht 2.5 kW / 2850 rpm
-Saw blade: O 420 x 30 mm
-Price/delivery: complete
-Total dimensions: 1200/800/H690 mm
-Total weight: 234 kg
Code: 0746
Brand: PERTICI - ITALY
Model: UNIVER 330 IP - CE Standard
Cggtaxebwh
Double cutting machine for wood, aluminium, Pvc, plastics, light alloys - CE Standard
Technical data:
N° 2 heads: 1 fixed and 1 mobile - The mobile unit is moved by means of a handwheel
Hydropneumatic head lowering
Max length mm 3280
Min length mm 247
Max length at 45 degrees mm 3280
Min length at 45 degrees mm 420
Vidia blade diameter mm 330 F30
Tilting heads up to 45 degrees
Motor power each Kw 1,1 - Rpm 2800 ...
MBM Doppelgehrungsaw DAS-U for coffinproduction
2x Hauptschnittaggregate
2x Nutaggregate rechts / links
2x Bohraggregate von hinten für den Unterkasten
(Verschlussbohrungen)
Hv2ndre0u
2x Bohraggregate von hinten für den Oberkasten
(Verschlussbohrungen)
6x Bohraggregate für Grifflöcher
Brevetti two-saw C16
Year of production 1995
CE standard
Maximum cutting width 85 mm
Cutting height maximum 100 mm
Saw blades diameter min/max - 300/350 mm
Engines with power 2 x 1,5 kw
Blade rotation speed 3150 RPM
Suction nozzles 2 x 100 mm
Recommended pneumatic pressure 6 bar
Capacity 800/1000 cycles per hour
Machine dimensions 1020 x 820 x 1600h mm
Swcb0w
Weight 350 kg
Cutting dimension max. 5000 mm
saw blade D = 500 mm
pneu. plunge
Qrgtr
pneu.swivel
pneu. clamping vertical/horizontal
motorized length adjustment
SPS memory control
machine available at short notice
Miter saw, saw unit right left, double miter saw, crosscut and miter saw, double end profiler
C3zxdpn3
-Manufacturer: Kaltenbach, double miter saw type DKL 500
-Cutting length: 245 to 4180 mm
-Saw units: 45° pivotable
-Saw blade: Ø 490 mm
-Accessories: incl. Saw blades see photos
-Total dimensions: 5130/1100/H1410 mm
-Total weight: 1154 kg
-Cutting area approx. 300 x 120 mm
Okg0ghoqi
-saw blade 350 mm
-traverse path 370 mm
-turning knob D= 1200 mm
The round table with the saw unit can be turned very easily on both sides
Locks for locking are currently mounted on one side.
The same can of course also be mounted on the other side
Weight 890 kg
Cutting and mitre saw
B73oqymuft
Brand:Elumatec
Type:KS101
'Nro30150
Cutting and mitre saw
Techn info:
2800 v/min
Airpressure 7 bar
Power 220/380 volt, 50 Hz, 3 fas, 8,7 A
Stock no:104285BXM
- Type ZS 200 N
Saw blade diameter 520 mm,
saw blade mounting hole 50 mm
saw blade speed 2.800 rpm
400 Volt / 5 kW (S6/40%) Motor with brake and automat.
Star delta motor control
cutting width at 90°: 420 mm
cutting width at 45° swivelled: 295 mm
cutting height at 90°: 200 mm
cutting height at 45° tilted: 140 mm
Saw can be tilted on one side up to approx. 25° to acute angles
and tilted flat to the left up to 30°.
Machine weight approx. 250 kg
-stable cast iron construction
-precise ball-bearing...
PERTICI Semi-automatic double mitre saw UNIVER 330
Year of manufacture 2005
Semi-automatic double mitre saw with 2 saw units,
mitre cut 0° to 45° right and left, shear cut 0° to 45° left resp. right
Machine and rotary table in solid cast construction
steel substructure in stable welded construction
hydropneumatic saw blade feed
saw head quick approach
cutting length readable via millimetre scale
Adjustment of the right working head by means of hand wheel
Saw blade diameter 330mm
Dhslqcjne
Bore 3...
Double-saw, bevel for cutting frames, frames, strips of wood, PVC, etc.
O9fkj
Brevetti B84 model
2 Motors with power 1.5 Kw each (three-phase)
Disc diameter 300 mm
Angle adjustment 0 ° - 22.5 ° - 30 ° - 45 °
The machine is equipped with an electric brake that stops the wheels immediately after switching off the machine.
Additional side tables included.
We offer 2 pieces of this model (the second with 1-phase motors)
Pneumatically controlled mitre saw with patented bi-directional clamping system which allows clamping of profiled workpieces without need of counter profile or setting of clamps for different mouldings. Independent saw stroke speed control. Front fence for minimum waste,setting time and plunge stop for first cut. Centre V support for quality cutting of solid wood, plastic and profile wrapped MDF.
Cutting height 80mm
Cutting width 85mm
Cbcmvlyg9r
2 x 350mm dia. TCT sawblades
3Kw Motor
Pneumat...
- dimensions and angles set from the desktop
- cutting at an angle and milling for lamello from one fastening
Bpvjzbtu0o
- new saws and cutters for lamellas
saw
Miter with drilling
BALESTRIERI TECHNA PLUS 3001
Manufacturer BALESTRIERI
Model / machine type TECHNA PLUS 3001
Year of production 2006
Machine category Saw Plow
Mobile cutting head with positioning drive through motion units and electronic digital display. Slides consist of tempered guides and recirculating ball racks.
• 2 units with an O 400 blade - each unit is driven by a Kw. 3
• The capacity (radial system) of the rolling slide unit
• 2 support tables of components supplied with vertic...
crosscut and mitre saw
Grey type ZS 85N
used machine, year of construction: unknown
Power 400V 50 Hz
Speed 2800 rpm
Saw blade diameter 300 mm
Machine weight Approx. 75 kg
Bjjjmwxdy0
Suction nozzle diameter 75 mm
Cut to length - cuts 380 x 85 mm
Mitre cuts vertical at 45° 265 x 85 mm
Mitre cuts
Vertical at 45° 380 x 60 mm
Tiltable Yes up to 45
Length stop -roller conveyor L: 3000 mm x W: 300 mm
Stop valve 1
Condition / work carried out
- Machine cleaned
- Machine functionally tested
- Usage-rel...
This machine is in perfect condition, and ready for test. It was not used for more that 40 working hours.
CONFIGURATION:
- Stromab TR501
- Stromab BPE5000
- Pneumatic presser
TECHNICAL DATA:
Kfcwui9z
* Machine length: 7200mm
* blade diameter: 500mm
A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily...
The second-hand mitre V-grooving machine for the processing of furniture parts by folding system.
Stock length: 160 - 3.650 mm
Stock width: 60 - 1.200 mm
Stock thickness: max. 50 mm
EQUIPMENT
- 1 saw support with 2 motors (arranged at 45°)
- Swivelling device for the two motors on the saw support, to allow an adjustment range from 22,5 - 90° for the mitre cut
- Tape application advice for veneered surfaces)
Ozyav
Automatic mitre saw UK-450
- Saw blade diameter 450mm
- Processing length according to customer requirements
- autom. positioning
- automatic mitre adjustment (up to +/- 60°)
H2lgelt
- Range of application: Wood, plastic and aluminium processing
- Feed conveyor as smooth conveyor (optionally as roller conveyor)
Further technical details and details on request.
Long cut wedge saw Mitre adjustment via stop arm and staking out holesMachine with two-hand safety controlSaw blades up to diameter 800mmSuction nozzles at relavant pointsHorizontal and vertical workpiece clampsSaw blades, suction systems and roller conveyors/length stops on request.
Bfomwnzcu3
Miter saw with a saw blade diameter of 600mm (optional 800mm)
Umrnkp7s
- manual miter adjustment
- Pneumatic table clamping
- Pneumatic workpiece clamping (height and inclination angle of the clamping cylinders infinitely adjustable)
- Two-handed safety control
Optionally available:
- Automatic miter adjustment
- Roller conveyor with length stop or positioning system
- Design as a sawing machine
- Preload magazine
- Horizontal clamping device
- Suction system
- Other accessories on request
We ...
We make the search easier for you
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Morlock Motors official partner of Machineseeker and Truckscout24
Sample sales contract for used machines in nine languages
Olympic Games: Machineseeker sponsors Team Germany
Machineseeker still biggest sponsors of 2nd German football league
Photo gallery: the 10 strongest forklift trucks in the world
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.