Used Holz Her 1402 for sale (161)

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Condition: unchecked Equipment and technical data: - Edgebanding thickness: 0.3-5 mm - Workpiece thickness: 6-45 mm - Minimum workpiece width: 60 mm - Minimum edge length: 200 mm - Feed rate: 11 m/min - Electrical connected load: 3.4 kW - Extraction port: 100 mm - Air requirement: 550 m³/h - Glue system: cartridge 1906 - Trim saws, front and rear: 1975 - Radius milling unit, top and bottom: 1942M - Radius scraper, top and bottom: 1929 - Buffing unit: 1941 K Hedpjyq T Injfx Ahvjfd - Machine length: 3675 mm - Machine width: 1470 mm - Machine height: 1200 mm Weight: 950 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Hodeyuld Aopfx Ahvefd Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Condition: used, Holz Her CUT 6120 Heavy-duty precision high-performance panel saw Cutting length: 3900 mm Cutting depth: 3100 mm Saw blade projection: 82 mm CUTCONTROL 2 control system, 17" TFT touchscreen Powerful optimization software: CD CUTTING-SYSTEM Label printer 3 air-cushion tables 1800 x 600 mm Automatic angle pressing device, up to max. 1300 mm Hedpfx Ahsytrvijvofd Automatic notch-cutting device Offcut management device Remote cable control Pneumatic trimming stops Main saw unit: 11 kW, saw blade diameter 350 mm Scoring saw unit: 2.2 kW, saw blade diameter 180 mm Saw carriage feed: 0–100 m/min, stepless Saw carriage return: 130 m/min Rip fence feed: 0–100 m/min (EU 0–25 m/min) Rip fence return feed: 100 m/min Rip fence clamps: 7 units Compressed air supply required: 6 bar Extraction connection on main machine: 1 x 120 mm Extraction connection on pressure beam: 3 x 120 mm Extraction capacity: 3500 m³/h Air flow velocity: 30 m/sec Machine dimensions approx. 6000 x 6000 mm Weight approx. 5,000 kg Machine from retirement / craftsman's workshop Machine is in TOP CONDITION Ex site

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Cutting length × width: 4,400 × 4,400 mm 3 air flotation tables of 2000 mm each Air cushion next to the cutting line Electric guide for main saw blade and scorer Hodpfx Aoyuuyyohvofd 5 clamps + 1 double clamp = 7 total 11 kW motor for Ø 350 mm saw blade 2.2 kW motor for Ø 180 mm scorer Plexiglass safety guards damaged Estimated availability: approx. 5 months

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Features and technical data: Hjdpfoxymd Hjx Ahvsfd Cutting length: 5300 mm Cutting height: 2200 mm Max. workpiece thickness: 80 mm Motor: 5.5 kW Compressed air connection: 6 bar, 50 NL/min Extraction connection: 2 x 100 mm, 1200 m³/h Pneumatic aggregate locking Pneumatic aggregate penetration Digital horizontal display Availability: by arrangement Location: Flörsheim

Condition: good (used), Year of construction: 1982, Cutting length 4.300 mm Cutting height 1.800 mm machine weight ab. ca. 600 kg kg Hodpfx Aeygm Tiohvjfd

Condition: good (used), Year of construction: 2003, functionality: fully functional, power: 5.5 kW (7.48 HP), Max. cutting length: 5300 mm Max. edging height: 2100 mm Max. cutting depth: 80 mm Digital display for horizontal and vertical cuts Saw unit: 5.5 kW Saw blade diameter: 300 mm Hsdpfxoyucmhs Ahvofd Unit pneumatically tiltable Dimensions (LxHxW): 6620 x 2948 x 1480 mm

Condition: used, Year of construction: 1998, Price: On request - Year: 1998 - Documentation available: No - CE certificate present: No Hfjdpfsyrruvjx Ahved - Serial number: 6605/9-811 - Max. cutting height vertical [mm]: 1900 - Max. cutting height horizontal [mm]: 1800 - Max. cutting width [mm]: 4000 - Max. cutting depth [mm]: 40 - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Fuse [A]: 16 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Machining Centre HOLZ-HER EVOLUTION 7405 -used- Throughfeed processing; 4-sided trimming possible; integrated vacuum pump; automatic suction cup positioning; hardened, dust-protected prism guides; ball screw drives on all axes; network card for remote maintenance; integrated control cabinet; control cabinet cooling with heat exchanger; manual control device; XL drilling head; saw unit for slotting in X direction; pick-up tool changer; automatic central lubrication. ----- Technical Data ----- Min. workpiece length X: 200 mm; Min. workpiece length Y: 70 mm; Min. workpiece thickness: 8 mm; Max. workpiece length X: 3,200 mm; Max. workpiece length Y: 920 mm; Max. workpiece thickness: 70 mm; Machine control software: CAMOUS HOPS; Main spindle motor power: 6.5 kW; Main spindle speed: 1,000 - 18,000 rpm; Main spindle taper: HSK-F63; Drill unit motor power: 1.7 kW; Drill spindle interface: M10, fitting diameter 11 mm; Number of vertical drill spindles: 13 units; Number of horizontal twin drilling spindles in X-direction: 2 units; Number of horizontal twin drilling spindles in Y-direction: 1 unit; Saw blade diameter (saw unit): 120 mm; Number of tools in changer: 6 units; Extraction port diameter: 2 x 120 mm + 1 x 140 mm; Required air volume: 4,100 m³/h; Required static vacuum: 2,500 - 3,000 Pa; Required air velocity: 30 m/s; Compressed air connection: 6 bar; Compressed air consumption: 300 l/min. Quality Information: - complete basic cleaning - electrics checked - pneumatics checked - set according to manufacturer specifications - immediately ready for operation Hfjdjyrp Srepfx Ahved

Condition: excellent (used), functionality: fully functional, saw drive: 3,000 W, Holz-her 1220 automatic vertical panel saw. Multiple settings, half or whole board cutting. Hfedpfxox Eyqyo Ahved You can try it, it works well.

Condition: excellent (used), functionality: fully functional, Edge banding milling machine with Holz Her 3-roller feed unit, 30 mm spindle, 50 mm milling width. Machine dimensions: 1000 x 1000 x 1300 mm, weight: 250 kg, in good condition, fully functional. Shipping available at additional cost. Hfjdpfxovkgdrj Ahvsd

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 252 / 0 - 701, functionality: fully functional, Availability: Immediate - End of March Year of manufacture: 2007 Working area: 3866 x 1260 mm Max. traverse path: X = 3268 mm, Y = 1650 mm, Z = 325 mm Workpiece passage height: 345 mm Max. machining thickness: 175 mm Max. workpiece size for edge routing: 3510 x 1445 x 280 mm Max. traverse speed X-axis/Y-axis: 100 m/min Max. traverse speed Z-axis: 25 m/min Drilling unit motor power: 3 kW Hfjdpfxjyt Ehle Ahved Saw unit motor power: 1.5 kW Milling spindle motor power: 9 kW Milling spindle speed: 1000 - 24000 rpm Vacuum pump: 140 m³/h 6 consoles Tool changer: 14 positions Front and rear stop row Crosshair laser for vacuum cup positioning

Condition: good (used), Year of construction: 1997, functionality: fully functional, - PVC Primus, 3 mm PVC cartridge system - Gluing, flush trimming, flush milling, chamfer milling, radius milling - Scraper blade, buffing unit - Dimensions: 4700 x 1400 x 1650 mm - Weight: 1300 kg - Working dimensions: Length: 4500 mm Depth: 1020 mm Height: 1630 mm - Connection nozzle: 140 mm Ø - Workpiece width: min. 60 mm - Feed rate: 11 m/min - 6 bar - 400 Volt compressed air - Edge thickness: 8 mm for strip material, 2 mm for roll material - WITHOUT pre-milling unit - New pneumatic cylinder Shipping possible at additional cost Hfedswv Uq Ajpfx Ahvsd

Condition: ready for operation (used), Holzher PK 1220 automatic Super Cut - automatic feed with 2 speeds (selectable over the full or half length, with or without automatic return) - strip stop - still under power, inspection possible Cutting width: 5300 mm Edging height: 2100 mm Passage height: 2200 mm Cutting depth: 80 mm Saw unit tiltable: 90° Motor power: 4.6 kW Saw blade: 300 mm Weight: approx. 1000 kg Required room height: 2895 mm Length: 6555 mm Hedpfx Aheyatdhsvsfd Ex location Dismantling and loading available at extra charge

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edgebanding: between 8 and 60 mm, Edge thickness up to 8 mm depending on the unit Configuration: -calibrating, -edge feeding, -glue application, -end trimming, -milling group; flat or profile milling of upper or lower edges, -profile milling unit, -scraping group, -polishing station Pressure beam, feed stop, control panel Year: 2017 Hsdpfxoytp Hro Ahvjfd

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, operating hours: 500 h, Holzher Uno 1302 , Year 2012 , Flat scrapers , Fully functional , Can be tested , Hfsdpfx Asxz Icgshvsd

Condition: used, Year of construction: 1990, Used machine Year of manufacture: 1990 Hfodpfx Ajyncpvohvod Equipment and technical data: - Automatic edge feeding - Cartridge glue system - Pressure unit with 4 rollers - Cross-cut saw unit - Flush trimming unit - Combination trimming unit (flush/chamfer/radius) - Radius scraper - Buffing unit - Edgeband thickness: 0.3 - 20 mm - Maximum edgeband height: 66 mm - Minimum edgeband length: 200 mm - Feed speed: 8/16 or 12/24 m/min Availability: short notice Storage location: 63934 Röllbach

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Hfjdpfxow I U E Ao Ahvjd Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2001, Used machine Year of manufacture: 2001 Equipment and technical data: Machine is completely workshop overhauled! Hsdpfx Ahsw Nac Aevofd Automatic horizontal and vertical positioning for absolute and incremental dimensions Digital readout for horizontal cuts PLC control with a 2-line display and plain-text error diagnosis for operation mode and fault diagnosis Infinitely variable feed speed up to 24 m/min Automatic workpiece end detection Calculator function integrated in the control panel (calculation of workpiece dimensions) Cutting length: 4300 mm Cutting height: 2200 mm Max. trimming height: 2100 mm Max. scoring height, vertical: 2100 mm Max. cutting depth: 80 mm Motor: 5.5 kW Saw blade speed: 4,500 rpm Saw blade diameter: 300 mm Air requirement: 1,200 m³/h Air velocity: 20 m/s Static negative pressure: 1,200 Pa Extraction connection: 2 x 120 mm Dimensions (L x W x H): 5,620 (plus extraction nozzle) x 1,480 x 2,948 mm Room height: 2,990 mm Compressed air connection: 6 bar Air consumption: 50 NL/min Electrical connection load: 5.7 kW With Supercut pre-scoring unit With pneumatically swiveling saw unit With longitudinal stop for lower workpiece support With short folding rail, complete Availability: by arrangement Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2016, Numerically adjustable infeed fence Air flotation infeed table Anti-adhesive liquid spray system Pre-milling unit with diamond cutters Edge feeder for edge banding from coil or strips Glue station for GlueJet cartridges or L-Tronic laser technology 4 pressure rollers with pneumatic pressure adjustment Edge lubricant spray system Dual-motor precision end trimming unit with pneumatic angle adjustment Top and bottom edge surplus trimming unit (straight trimming) Numerically adjustable profile edge milling unit Flat scraper Profile scraper – two profiles Cleaning liquid spray system Pneumatically activated buffing units Pneumatically activated edge buffing unit Feed speed continuously adjustable from 10 to 25 m/min Automatic lubrication of the feed chain Frame support Minimum workpiece length: 140 mm Hedpjyrniiefx Ahvsfd Workpiece thickness: 8–60 mm Minimum workpiece width: 60 mm Year of manufacture: 2016

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design – Edge thickness 0.4 – 6 mm SPS screen control Edge-Control PPC 221 color display Pre-milling unit for prepping before the gluing station Fully automatic edge magazine for both roll and strip materials GLU-JET adhesive application station for EVA and PUR glue, suitable for cartridges or granules + PU Adhesive application via nozzle technology Workpiece height 6–65 mm Automatic glue height adjustment 1912-3 pneumatic pressure unit 1918 pneumatic end-trimming unit for roll and strip material, edge thickness up to 8 mm Pneumatic adjustment from 0–10° for miter saw angle 1827 MOT 4 milling unit for flush trimming (8 mm), radius and chamfer milling – 15°; 1827 MOT NC-controlled axes via control panel 1832 SPS corner rounding unit for rounding edges up to 3 mm edge thickness in through-feed Hfjdpoymdaysfx Ahvod Scraper unit for chamfers and radii with 2 motorized scraper holders Surface scraper unit – finishing Spray system – PU Complete DIA tool package included Machine is FULLY REFURBISHED and in TOP CONDITION Available from stock in Lieboch

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Hfsdpfxsvvkfdo Ahved

Condition: used, Storage location: Nattheim Hfsdpfx Ahevvkrdjvsd

Condition: used, Year of construction: 2011, Weight: approx. 4500 kg Hjdevvi R Eopfx Ahvofd Storage location: Nattheim

Condition: used, Year of construction: 2006, EVA glueing, 2 pressure rollers, cross-cutting station, pre-milling cutter and rounding cutter, surface scraper, transport device Storage location: Nattheim Hfodpfxovvkg Io Ahved