Used miter saws / chop saws for sale (129)

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Kjdpfx Ahoxnlgcs Eslu

Condition: used, Year of construction: 2003, Swiveling, but not tilting. Saw blade diameter: 550 mm. Bore diameter: 50 mm. Speed: 2800 rpm. Motor with brake: 3.0 kW. Kjdpfx Aozd Tikoh Ejlu Cutting width at 90°: 420 mm. Cutting width at 45° (swiveled): 295 mm. Cutting height at 90°: 200 mm. Weight: approximately 330 kg. Storage location: Nattheim.

Condition: used, Year of construction: 1995, Motor: 3.0 kW Klsdszd Tgiepfx Ah Eeu Can swivel on both sides Cutting height: 170 mm, with stand Location: Nattheim

Condition: like new (used), functionality: fully functional, AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 second hand machine working condition : excellent CE mark: YES instruction booklet: YES cutting diagram . see attachment with rollers tracks ( as in photo ) n.01 stop with blade diam.mm.550 motor power Hp 10 volt. 380/50 Klsdpozfggfjfx Ah Eju

Condition: new, cutting width max. 250 mm Cutting height max. 80 mm Saw blade diameter 400 mm Motor output 3,0 kW turning speeds 2800 U/min Required air-pressure 6-8 bar work height max. 900 +-20 mm mm Dimensions (L/W/H) 530x869x1217 mm SALVAMAC Legend 400 – The semi-automatic chop saw ----- - Maximum cutting area: 220x80/ 250x50 mm. (When sawing stacked boards, note: rear stop height 100 mm) The structure is made entirely of sturdy, thick-walled steel, which is painted throughout and reinforced. A solid one Floor mounting system is equipped with flanged steel feet, to ensure secure attachment. The two-hand control is ergonomically positioned for comfort and efficient operation. Motor power of the saw motor 3.0 kW. The cutting speed is adjustable via a pneumatic controller, to enable precise adjustment. The system also has a Shock-absorbing system to minimize vibrations and ensure worker safety to improve. HM circular saw blade, diameter 400 mm, Z=96. The upper pressure hood has an electro-pneumatic control for precise operation. The pressure hood movement system is innovative Ball bearings operated with double dust protection and automatic lubrication system, which ensures smooth functionality. In addition, the electrical system is compliant with CE standards. CE models are standard with at least 1 meter long inlets and outlets (undriven rollers or flat table) to facilitate operation optimize and meet security standards. Technical data: ----- Saw cross section max. 220x80/ 250x50 mm Saw blade motor power: 3.0 kW Saw blade diameter: 400 mm Saw blade type: HM Z=96 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 ----- Total price ex works: on request! Ksdoxmk Ddepfx Ah Eelu ----- Options like: - Inlet/outlet with undriven rollers/flat table - Mechanical or pneumatic stops - Electronic length stop / slider Salvastop (Combo series) - Movable front protection and more on request! ----- (technical data according to the manufacturer without guarantee!)

Condition: new, saw-blade dia. 500 mm Cutting height 120 mm Motor output 5,5/7,5 kW Kledpfx Aowhf Ipoh Eou working length 4100 mm

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Ksdpevu Hd Tsfx Ah Eslu Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Large radial saw for cross-cutting and edging boards. Quick conversion between double mitre cuts or cross-cutting. Robust swivel arm made of cast iron with replaceable hex guides. Saw unit tiltable to both sides up to 45°. Cutting height at 90° max 640x20/610x60 mm Cutting height at 45° max 380 x 100 mm Cutting height at -45° max 330 x 100 mm Cutting depth with motor at 0°/45°: 100/50 mm Saw blade diameter/bore: 350/30 mm Saw blade speed: 2800 rpm Table (LxW): 1675x1060 mm Motor 3 kW/400 V Kjdow I Utyepfx Ah Eslu Weight: 220 kg Availability: short-term Storage location: Hochheim

Condition: new, Year of construction: 2026, Product Details Crosscut and miter saws Type ZS 200NF Kedpfx Ahscnz Rve Eslu Crosscut and miter saw with a maximum cutting height of 200 mm Stable gray cast iron construction Precise ball bearing guide for the tool carriage on hardened and ground steel shafts Manual saw feed Quick miter adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard can be connected to an extraction system Machine mounted on a mobile machine base with 1.5 m long roller conveyors on the left and right Left side with scale and stop slide Technical data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range horizontal 45° - 90° - 25° Miter range vertical 60° - 90° - 30° Saw blade diameter 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: Available from stock in 54634 Bitburg - Immediately available - Upon request, we will also be happy to offer you the saw blade.

Condition: new, Year of construction: 2026, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Kodsw Hl Aqspfx Ah Eslu Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: excellent (used), Fezer Crosscut and Mitre Saw Kjdpfx Ahoyxx Evs Ejlu The powerful solution for workshop and construction site for cutting wood, aluminium, and plastics Type: KG 25 AC motor 220 Volt, 0.85 kW 2800 rpm Indexing for mitre cuts Any intermediate position can be locked by clamping screw. For 250 mm saw blade Weight: approx. 24 kg Cutting capacity at 90 degrees: H = 50 mm / W = 120 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 2005, OPTIMIZATION CROSS CUT LINE STROMAB TR350 MATRIX 4-7000 Loading chains for automatic loading. 8 chains, lenght 1.500 mm Loading pusher 7.000 mm 4 optimization criteria Automatic knot removal, fluorescent chalk marking Cutting head. Diameter: 350 mm. 4 HP Cutting section capacity: 150 mm x 80 mm,...., 210 mm x 30 mm Classifier unloader with 2 fast pneumatic ejectors. Conveyor with variable speed Year 2005 Klodpfxezcy Nco Ah Eou CE

Condition: used, Year of construction: 2014, Stromab CT600 Automatic Upstroke Crosscut Saw for Straight and Angled Cutting - 2014 CE 6000mm infeed capacity 2000mm Outfeed table 12" Touch screen graphic display Power 1000 controller Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. 5 optimising criteria - longest size, minimum waste, priority size, by volume or by value. Cutting list entered via controller key pad Graphic description of the workpiece. 10hp motor Rack & pinion drive system for pusher with magnetic reading strip to give a high level of  repeat cutting accuracy 600mm diameter blade CUTTING CAPACITY POSITION A) # max height At 0°: mm. 200x215 or 50x370 At 30°: mm. 200x185 or 50x325 At 45°: mm. 200x150 or 50x265 CUTTING CAPACITY POSITION B) # max. width At 0°: mm. 160x315 or 40x410 Kledpswl Hyusfx Ah Eeu At 30°: mm. 160x270 or 40x350 At 45°: mm. 160x220 or 40x285 Angle setting -70 degrees, 0 degrees, + 70 degrees Adjustable saw stroke speed Vertical clamping Horizontal clamping Dust extraction 1 off 100mm, 1 off 120mm. Plexiglass hood with gas springs Year - 2014 CE

Year of construction: 1997, condition: excellent (used), main engine 11 kW disc diameter max. 500mm cutting height max. 160mm cutting width 5 - 160 mm ruler with guide rollers feed speed adjustable on a gear motor Kledpji Dbvmjfx Ah Eeu machine dimensions (length/width/height) 170 x 130 x 130 cm weight ~ 500 kg

Condition: good (used), Code: 0355 Brand: AVOLA - GERMANY Model: GAMA 65 K - CE Standard Cutting centre for timber joinery, beams, timber roofs, sawmills, balconies, garden furniture and various – CE Standard Technical data: Lower cross-cut saw with rotating table and tilting blade Vidia blade diameter mm 650 Hole 30 Pneumatically operated safety cover Motor 10 Kw Motor speed 3000 rpm Pneumatic clamping cylinders Pneumatic cross-cut device with two-hand control Kjdpfx Aey A S Dtoh Ejlu Electric blade tilt adjustment 90–30° with flat digital display 5–175° Cutting height at 90° 245 mm Cutting height at 45° 164 mm Cutting height at 30° 113 mm Laser cutting guide Table dimensions mm 1500 x 1500 Work table height mm 1000 Handling brackets for forklift truck Right Roller conveyor mm 3000 x 600 - Support guide 5000 mm Left Roller conveyor mm 3000 x 600 - Support guide 5000 mm Overall dimensions of assembled machine mm 10850 x 2000 x 1700 h Overall dimensions for transport mm 2600 x 2000 x 1700 h + Stacked roller conveyors mm 5000 x 1000 x 2000 h

Condition: excellent (used), OMEC TA185 crosscut saw Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material clamping Klsdpfxjrk Nxgo Ah Eeu Pneumatic saw pass Saw control with two buttons Main motor with a power of 7.5kw 2x roller tables length 160cm each CE certificate Technical documentation

Condition: excellent (used), functionality: fully functional, OMGA Radial Arm Saw RN 450 Cutting width at 90° max: 450 mm Kedpfx Aoyzp Dnsh Ejlu Maximum cutting height: 80 mm Saw unit adjustable in two planes Saw blade speed: 3000 rpm Main motor power: 2.21 kW Blade diameter: 300 mm Power supply: 220V

Condition: excellent (used), functionality: fully functional, STROMAB CT800 Beam Cutting Centre Beam cutting centre for large cross-sections, making it an optimal solution for woodworking and timber frame construction. With electronically controlled 5-axis technology, it meets all requirements for straight, inclined, and compound cutting. It guarantees maximum processing speed and finished product quality, reducing labour input and maximizing productivity. Specification: Electronic adjustment of blade tilt angle 90 - 45 degrees Maximum cutting width 650 mm Kljdpfx Aheytnfts Eou Electronic saw height adjustment Automatic material feeding Touchscreen control panel Rotary worktable 0-345 degrees Maximum blade diameter 800 mm

Condition: used, Year of construction: 2003, Saw blade diameter: 350 mm, bore diameter: 30 mm, motor: 2 kW, speed: 3800 rpm. Extraction connection diameter: 95 mm. Weight: approx. 105 kg without stand. Cutting width at 90°: 430 mm, at 45°: 300 mm. Cutting height: 135 mm. Hydraulic return brake. Without stand and roller conveyors. Klsdpoyw Tzijfx Ah Eju

Condition: excellent (used), Year of construction: 1998, Piccolo portable log sawing machine, manufactured by Holtec from Ellenthal, cutting width 1.6m. For cutting stacks of sawn timber. Motor: 7.6 kW, 400V. Weight: 155 kg. Lightly used, in good condition. Kljdpfoza Sdyjx Ah Esu

Condition: used, Year of construction: 2007, Cutting height 175 mm cutting width 750 mm Motor output 5,5 kW saw-blade dia. 550 mm Weinig OptiCut C700 under-table cross-cut saw for safe and precise cross-cutting of solid wood, especially hard and heavy timber with large cross-sections. The machine works with a pneumatically guided saw unit, two-hand control and hold-down device and is ideal for sawmills, timber construction and industrial solid wood processing. Kjdpfjy Tpqfex Ah Eslu

Condition: like new (used), Year of construction: 2024, Technical specifications: - Motor power 2.2 kW S1 - Max. Saw blade diameter: 350 mm - Saw blade holder: 30 mm - Cutting time per stroke: 1.5 sec. - Speed ​​on the saw shaft: 3800 rpm - Air consumption per cycle: 5 L - Working table height: 900 mm - Extraction nozzle: 2x100 mm - Operating pressure: 7-8 bar - Net weight: approx. 200 kg - Required air flow 1000 m³ / h - Voltage: 400 V / 50 Hz 3-phase - Cutting capacity in mm: 45 x 230 60 x 210 90 x 180 100 x 125 Standard basic equipment: - Saw blade feed pneumatic drive - Automatic engine brake - Set of operating keys - Emergency stop push button - Speed ​​control for saw blade feed - Fixed vertical protection device Kljdpfxjfhbuye Ah Esu - Upper safety pressure device (pneumatic protective hood) - Suction speed at least 28m / sec. - Colors: basic stand light gray RAL 7035, doors telegrey RAL 7046, protective shield and protective hood zinc yellow RAL 1018

Condition: used, Year of construction: 2004, Cutting height at 90°: 200 mm Cutting length: 410 mm Klodpfx Aoyvz R Ajh Esu Saw blade swivel: yes Saw blade tilting: no Roller conveyor / support table: no Saw blade diameter: 500 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Feed brake: Yes, hydraulic Extraction connection: 100 mm Machine length: Machine width: Weight: 110 kg

Condition: used, Year of construction: 2008, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Ksdpfjy S Rrbjx Ah Eslu Motor brake: yes Extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Condition: used, Year of construction: 2000, Cutting height at 90°: 200 mm Cutting length: 410 mm Horizontal miter range: 45° - 90° - 25° Vertical miter range: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Klodpfx Aey S Rq Rsh Eou Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Feed brake: yes Machine length: Machine width: Weight: 300 kg