Used sliding table saws 1501-2300mm cutting length for sale (35)

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Cutting plane directly on the saw blade Large-sized saw unit made of cast iron, double-mounted on the cast iron table – guarantees stability, precision, smooth operation, and long service life; 6-year HOLZKRAFT warranty on wear of the swivel segments Precision-guided format sliding table made of aluminum, anodized as standard 10-year HOLZKRAFT warranty on wear of the sliding table guide rails Parallel fence as standard with round bar guide and fine adjustment Large work table made of milled cast iron Smooth operation and precise cuts Standard table extension and table lengthening enable easy work with larger workpieces Extendable aluminum telescope fence with angle adjustment and two professional folding fences Made in Italy Motor 4.0 kW - 400 V Saw blade tilt 90 - 45° Format sliding table length 1600 mm Table length 1020 mm Table width 325 mm Cutting width with parallel fence 700 mm Max. cutting height 90° = 100 mm Lodpswb Eh Nofx Ap Dsrn Max. cutting height 45° = 79 mm Saw blade diameter 315 mm Saw blade speed 315 mm Max. crosscut width to the left of the saw blade 1660 mm Scoring saw blade diameter 80 mm Scoring saw blade speed 7600 mm Weight: approx. 276 kg Note! The parallel fence and table extension on the right are not visible in the pictures. Availability: short-term Location: Flörsheim

Condition: new, CATALOGUE NUMBER RE060 - New machine TECHNICAL SPECIFICATIONS - Saw blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (works only with blades ⌀300, 350 mm) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Spindle speed 4000 rpm Lredpfx Ajyvivmjp Don - Scoring spindle speed 8800 rpm - Blade tilting 0 – 45° - Max. cutting length 1600 mm - Rip fence cutting width 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence set at 90° – 45° angle, accuracy ±1° - Max. cutting height with blade ⌀300 mm: 95 mm - Max. cutting height with blade ⌀350 mm: 120 mm - Upper dust extraction port diameter ⌀80 mm - Lower dust extraction port diameter ⌀100 mm - Weight 480 kg - Machine dimensions (folded) 2020x3380x1200mm Net price: 16000 PLN Net price: 3800 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (Price may change with larger exchange rate fluctuations)

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Price has just been reduced and will not reduce any further. Please only enquire if you want to buy it at this price before we scrap it as space is needed. Ljdpfsrubg Hox Ap Dern

Condition: used, cutting height (max.): 145 mm, cutting width (max.): 1,250 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, rotational speed (max.): 3,600 rpm, rotational speed (min.): 2,800 rpm, total length: 2,000 mm, total width: 1,300 mm, total height: 1,500 mm, overall weight: 800 kg, No. 3276 Sliding table saw Kölle K 45 Used Sliding table length approx. 2000 mm Sliding table with swing arm and fence rail Max. cutting height 145 mm Max. saw blade diameter 400 mm Cutting width 1250 mm Speeds 2800 / 3600 rpm Manual saw blade tilting 0° - 45° Manual cutting height adjustment Table size 1180 x 1150 mm LW Adjustable upper saw blade guard Transport dimensions approx. 2000 x 1300 x 1500 mm LWH Weight approx. 800 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Lrodpfx Apezbu Evs Dsn Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Year of construction: 2022, condition: new, Altendorf WA 6 Manual height adjustment, Double roller carriage, length 2000 mm, Scoring unit, Swiveling, Extension table, Angle/miter fence, Automatic brake, Lowerable below table height ----- Technical data ----- Swivel range: 0 - 45°, Cutting width at parallel fence: 1,000 mm, Max. cutting height: 87 mm, Max. saw blade diameter: 315 mm, Swivel range for miter fence: up to 49°, Speeds: 4,200 rpm, Main motor power: 5.5 hp / 4 kW, Scoring motor power: 0.5 hp / 0.37 kW, Lrjdpfx Aeihahmep Djn Work table height: 910 mm, Dust extraction port diameter: 1 x 100 / 50 mm each, Weight: 450 kg Large dust extraction hood Location: Available in stock, 54634 Bitburg - immediately available - Location: Available in stock, 54634 Bitburg - ready for loading - - immediately available -

Condition: new, Year of construction: 2026, Compact circular saw with a pivoting saw blade and a high-quality, anodized aluminum crosscut fence. The cutting plane of the compact circular saw is directly on the roller table. Precision-guided aluminum crosscut fence, anodized as standard. Large table extension guided on a telescoping arm and adjustable in length. The standard table extension and table widening allow for easy work with larger workpieces. The large saw unit made of cast iron is double-mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground cast iron, making it extremely robust and durable. Smooth operation and precise cuts. Aluminum crosscut fence. Equipped with a tried-and-tested ball contact system. Dust and dirt resistant due to minimal contact point between the ball and the trapezoidal rail. 10-year HOLZKRAFT warranty on wear of the hardened guide rails. Telescopic fence. Extendable aluminum telescopic fence. Angle adjustable. With two professional folding fences. Parallel fence. Standard with fine adjustment and quick clamping. Scope of delivery: Table extension Table widening Anodized aluminum crosscut fence Parallel fence with round bar guide and fine adjustment Model: SC 2 classic Item No.: 5504215 Technical data Table dimensions: 1020 x 325 mm Table height: 900 mm Fence length: 1660 mm Cutting height max. 90° with scoring blade: 100 mm Lrsdpfecnxamjx Ap Den Cutting height max. 45° with scoring blade: 79 mm Cutting width max. to the left of the saw blade: 1270 mm Cutting width with parallel fence: 900 mm Saw blade tilt: 90° - 45° Saw blade diameter max. with scoring blade: 315 mm Saw blade diameter max. without scoring blade: 315 mm Scoring saw blade diameter (optional): 80 mm Main saw blade speed: 4000 min-1 Scoring saw blade speed: 7600 min-1 Electrical connection: 400 V / 50 Hz Motor power: 4.0 kW Dust extraction port diameter: 120 mm Dust extraction port diameter on the saw blade guard: 60 mm Weight: 295 kg Location: In stock at 54634 Bitburg - available immediately -

Condition: new, CATALOG NUMBER RE041 - New machine TECHNICAL DATA - Blade diameter ⌀250 – 350/30 mm - Scoring blade diameter (operation only with ⌀300, 350 mm blade) ⌀120/20 mm - Main motor power 4 kW - Scoring motor power 0.75 kW - Main spindle speed 4000 rpm - Scoring spindle speed 8800 rpm - Blade tilt 0 – 45° - Max. cutting length 2000 mm - Cutting width with rip fence 1250 mm - Riving knife ⌀350 mm - Spindle flange diameter 87.5 mm - Table fence settable at 90° – 45°, accuracy ±1° - Max. cutting height with ⌀300 mm blade: 95 mm - Max. cutting height with ⌀350 mm blade: 120 mm - Top extraction port diameter ⌀80 mm - Bottom extraction port diameter ⌀100 mm - Weight 620 kg - Machine dimensions (L/W/H) 2255x3460x1450mm Lodpfxjzabgdj Ap Djrn Net price: 19,900 PLN Net price: 4,740 EUR Net price calculated at 4.2 PLN/EUR (In case of significant currency fluctuations, the price may change)

Condition: used, Year of construction: 1994, machine/vehicle number: 94-1-245, functionality: fully functional, Maximum blade diameter: 400 mm Maximum blade diameter with scoring blade: 350 mm Ljdjzavpaopfx Ap Dsrn Minimum blade diameter: 250 mm Scoring blade diameter: 120 mm

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 425.10.047.22, functionality: fully functional, We offer this Felder K700 panel saw in like-new condition, year of manufacture 2022. Manufacturer: Felder Lodpeyzfglsfx Ap Dsrn Model: K700 Year of manufacture: 2022 Condition: like new X-Roll sliding table Scoring unit If you have any questions or require additional information, please contact us by message or phone.

Condition: good (used), Year of construction: 1996, functionality: fully functional, Circular saw SICAR EXPRESS 32 year of construction 1996 S/N 800066 Manufacturer SICAR Italy Aluminum sliding carriage 1600mm main saw motor 5,5hp ( 4,0kW ) motor independent scoring motor 0,55kW Blades with 300/350/400 mm Cutting height of 110 mm at 90° and 80 mm at 45°. Manual tilt and height adjustment Inclination of main saw blade and scoring blade reaches 45° Lrjdpfetw D Tbex Ap Djn Extra ruler for angular cuts Workpiece hold-down device Top extraction also for 45° cuts Voltage 380 V, 50 Hz. CE marked 720 kg Technical data subject to change

Condition: good (used), Martin panel saw Sliding table: 170 cm Blade tilt and up/down adjustment: hydraulically controlled Motor: approximately 7.5 kW Lodpfxoy Uw Sye Ap Dern Maximum blade diameter: 450 mm Overall machine width when in operation: 380 cm Condition: good, the motor fan guard is missing, but the machine still functions properly.

Condition: like new (used), Year of construction: 2019, machine/vehicle number: 432.09.257.19, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, cutting height (max.): 133 mm, cutting width (max.): 800 mm, saw blade diameter: 400 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 5,500 rpm, rotational speed (min.): 3,500 rpm, year of last overhaul: 2022, Equipment: CE marking, documentation/manual, very well maintained, Ledpsy Ucp Rsfx Ap Dsrn still in daily use.

Condition: like new (used), Year of construction: 2025, For sale is a used JET panel saw JTS-600XL with a maximum cutting length of 1600 mm. The machine was only briefly used for demonstration purposes in our showroom and is therefore in as-new condition. Technical data: - Motor: 230 V / 1.5 kW / 2 HP - Saw blade speed: 4000 rpm - Saw blade diameter / bore: 250 / 30 mm - Saw blade tilt: 0° – 45° - Max. cutting depth at 0°: 80 mm - Max. cutting depth at 45°: 54 mm - Max. cutting width at rip fence: 610 mm - Table dimensions: 800 x 350 mm - Table extension: 415 x 350 mm - Table widening (right): 800 x 270 mm - Precision sliding table: 1600 x 255 mm - Max. cutting length: 1600 mm - Machine dimensions: 1650 x 2200 x 1100 mm Lrodpfey Nm H Aex Ap Dsn - Weight: 157 kg Scope of delivery: - Sliding table 1600 x 255 mm - Circular saw blade Ø 254 x 30 x 3 mm - 36 TCT teeth - Parallel fence - Support table 460 x 600 mm with extendable crosscut fence 2200 mm - Extraction port Ø 100 mm The machine is located in A-8561 Söding and can be inspected during our business hours at any time. Subject to prior sale! Related terms: saw, circular saw, panel saw, format Reference: R-D1618

Condition: excellent (used), 4 kW engine. Trimmer attachment. Cutting height: 9 cm. Ground clearance: 125 cm. Table length: 157 cm. Lodsy S U D Uopfx Ap Djrn

Condition: new, Year of construction: 2021, functionality: fully functional, Feed rate: 10 m/min – 10 + 18 m/min; Drive motor: 0.75 kW (S6) – 1.1 kW (S6); Precision running and guiding surfaces; Min. workpiece length: 140 mm; Min. Workpiece width: 70 mm. Segmented, rubberized chain plates with quick-change system. The minimum workpiece width varies depending on the workpiece length, height, and surface finish. Swiveling 15" smartouch control panel. Unlimited memory for user-defined edge programs. Fine adjustment of path parameters. Simple, clear, and intuitive display of units and functions. Lodpfx Asy Ndhdjp Djrn Unit selection and precise fine adjustment of the motor-positioned units (adjustment accuracy 1/100 mm) directly via the control panel. Adhesive temperature setting with automatic temperature reduction in standby mode. Pressure setting in the pressure zone. Optimization of the edge overhang during trimming (front and back). Plain text error messages. Maintenance schedule and linear meter counter.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Working range X: 3120 mm Working range Y: 2160 mm Working range Z: 105 mm 4-axis electro-spindle (360-degree rotation), 15kW power Enclosed cable management system for movement along the X and Y axes Vertical drilling bits: 12 Horizontal drilling bits: 4 2 grooving blades: 1 in the X direction and 1 in the Y direction Tool magazine with 10 positions on the right rear side 8-position tool changer on the left side of the machine Three vacuum pumps, 3 x 250 m³/h Loading unit with lifting table on the machine inlet side Air conditioner for the electrical cabinet Centralized automatic lubrication system Lrjdpfx Apsy Sz U To Den Photoelectric safety barrier Angular gearbox with 1 output and WELDON attachment for screwed circular blade, Dmax = 240 mm H06-H10 CNC starter tool kit Includes 1 blade and HSK collet assembly with tools/cutters.

Condition: like new (used), Year of construction: 2020, For sale is a demonstration machine: Hammer K3Winner Comfort panel saw with a cutting width of 300 mm. The machine was only briefly used for demonstration purposes in-house and can thus be considered as new, with full warranty/guarantee. Technical specifications: - Sliding table 2000 mm - Extension table 1100 mm - Mitre fence 1300 mm Lredpsy Akdrefx Ap Den - Angle stop index - Saw blade tiltable 90–45° - Max. cutting height 104 mm with 315 mm saw blade diameter - Cutting width 800 mm - 5.5 HP (4 kW) motor, 400 Volt - Year of manufacture: 2020 The panel saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, Hammer, panel saw, panel Reference: R-D1618-10

Condition: good (used), Year of construction: 2009, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 21 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 202 mm, cutting width (max.): 1,250 mm, saw blade diameter: 550 mm, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 2,800 rpm, total length: 3,200 mm, Equipment: CE marking, saw blade guard, Format 4 Panel Saw Kappa 550 Power Drive - 11 kW, speeds 2800-4000 rpm - Year of manufacture: 2009 - Power Drive control system - Positioning control for height adjustment: 202 mm - Positioning control for tilt adjustment: 90°–45° - Crosscut fence 3200 mm, 2 fence stops - Outrigger table 1250 x 650 mm - "X-Roll" sliding table, cutting length 3200 mm, edging shoe - Cutting width 1250 mm Lodpoy Hk Swofx Ap Dern - Overhead guard, extractable and height adjustable, can be swung out of the working area (not shown in the pictures but available) - Saw blade diameter 250–550 mm, max. cutting height 202 mm - Position-controlled height and angle adjustment 0°–46° - Table saw with table extension up to 1200 mm behind the saw axis, powder-coated steel - Weight: 1300 kg Price ex location Transport available at extra charge!

Condition: new, Year of construction: 2026, The CORMAK MJ45-KB4 sliding table saw is an industrial panel saw with a scoring unit, designed for precise cutting of furniture boards, plywood, and other wood-based materials. The 2600 mm sliding table and robust construction ensure repeatability and high cutting quality. Key advantages of the machine Scoring unit with a separate motor – eliminates chipping on laminates and veneers. Aluminum sliding carriage running on hardened steel guide bars – ensures rigidity and smooth feed. 2600 mm sliding table – reliable handling of large and heavy panels. Main motor 5.5 kW – consistent cutting quality in continuous operation. Tilt range 0–45° – flexibility when cutting angled components. Extendable telescopic fence up to 3100 mm – fast and repeatable settings. Rotational speeds 4000/6000 rpm (main blade) and 8000 rpm (scoring blade) – optimal adjustment to material type. Cast iron body – vibration damping and cutting system stability. Construction and technology The design is based on a torsion-resistant cast iron body, which stabilizes the saw unit and minimizes vibrations. The aluminum carriage moves on hardened rods, ensuring long-term precision. The outrigger table facilitates handling large panels without additional support. Adjustment mechanisms with clear readouts (including angle indication on the handwheel) allow for quick and precise setup. Precision and performance The MJ45-KB4 sliding table saw ensures clean edges thanks to the 125 × 20 mm scoring blade and stable guide geometry. The cutting height range up to 90 mm at 90° and 56 mm at 45° allows processing of a wide range of formats and thicknesses. Two main blade speeds enable parameter adjustment to the material type, maintaining dimensional repeatability and reducing the need for rework. Applications The machine is dedicated to workshops and production facilities seeking a stable panel saw with a scoring unit for serial cutting of furniture and structural elements. It meets the requirements of plants where quality, dimensional accuracy, and reliability in multi-shift operation are essential. Standard equipment Scoring unit with separate drive 2600 mm sliding table on guide bars Dial indicator for blade tilt Lsdpjywkc Dofx Ap Dern Telescopic fence up to 3100 mm (front/rear mounting on support table) User manual in Polish CE declaration of conformity Optional equipment Set of saw blades for wood and laminate Dust extraction systems Panel transport trolley Technical specifications Sliding table length: 2600 mm Cutting width: 1250 mm Saw tilt: 0–45° Cutting height at 90°: 90 mm Cutting height at 45°: 56 mm Max main blade diameter: 315 mm Max scoring blade diameter: 125 mm Main blade speed: 4000 / 6000 rpm Scoring blade speed: 8000 rpm Main motor power (continuous S1/S6): 5.5 kW Scoring motor power (continuous S1/S6): 0.75 kW Weight: 650 kg

Condition: new, Year of construction: 2026, The PS12E-3000 format saw is a professional carpentry tool that stands out for its powerful specification and its ability to perform large-scale precision cuts. This advanced circular saw has been developed for a variety of woodworking tasks and is the ideal tool for demanding users. The main features of the saw, the PS12E-3000 wood panel saw: Two cutting discs: The saw is equipped with two cutting discs - a main disc and an undercutting disc - which provides ample cutting capacity for different types of wood materials. Large format table: One of the main advantages of this model is the extra-wide, bearing-mounted format table with support, which allows precise processing of large-format chipboard up to almost 3,000mm long and other large-sized wood materials. Additional undercutter: The additional undercutting blade makes the saw ideal for cutting furniture board and particleboard, eliminating the risk of splintering and ensuring an even cut. Disc inclination: The cutting disc can be tilted from 90° to 45° Maximum bar length: This saw is fitted with a bar of an impressive length of 2,300 mm Disc replacement: The replacement process is quick and efficient, thanks to the ability to remove the metal top and unscrew the blade. Saw blade guard: The saw has an effective saw blade guard, which can also be connected to the extraction system to help keep the work area clean. Powerful motor: The saw blades are driven by a powerful 3.8 kW, 400V motor, which guarantees smooth operation and efficient cuts. Control panel: The machine's control panel is located on the underside of the saw and includes an emergency stop, a knob for angle cuts (45°) and a knob for blade height adjustment with a locking mechanism. Additional measuring instruments: All guides are equipped with length and cutting angle scales, allowing the required angle and length to be quickly set without the need for additional measurements. Extraction compatibility: The saw is suitable for connection to a sawdust and chip extraction system with a suction nozzle diameter of 100 mm, which contributes to keeping the workplace clean. Application of the saw, format saw for wood: The PS12E-3000 format saw is an advanced tool that combines durability, precision and performance, making it the ideal choice for professional woodworkers and everyday woodworkers. Its versatile capabilities and advanced features allow it to handle a wide variety of woodworking projects and tasks in both industrial and craft settings. DIMENSIONS OF THE MOVING TABLE 3000 x 270 mm MAIN TABLE DIMENSIONS 800 x 385 mm SIDE AUXILIARY TABLE DIMENSIONS 880 x 800 mm BAND WIDTH 1220 mm SAW TILT 0-45° CUTTING HEIGHT AT 90° 100 mm CUTTING HEIGHT AT 45° 80 mm MAXIMUM SAW SIZE 315 mm MAXIMUM Blade size 100 mm MAIN SAW RPM 4000 rpm CUTTING SAW RPM 5800 rpm POWER OF ENGINE S6 5,3 kW / 7,1 hp POWER OF ENGINE S1 3,8 kW / 5,1 hp Lrodpfxovugc Ao Ap Djn 400 V POWER SUPPLY WEIGHT 309 kg

Condition: new, Year of construction: 2026, The PS12E-2000 format saw is a professional carpentry tool that stands out for its versatility and advanced features. This circular saw has been designed for a wide variety of woodworking tasks, offering both precision cutting of narrow and thin boards and handling thick wood tops with a maximum thickness of up to 100mm. The main features of the saw, the PS12E-2000 wood panel saw: Two cutting discs: the saw is equipped with two cutting discs - a main disc and an undercutting disc, providing versatile cutting capabilities for different types of wood materials. MDF undercutter: An additional undercutter has been fitted to the machine, allowing precise cutting of MDF and other wood materials with a similar structure. Blade height adjustment: offers infinitely variable height adjustment of the cutting saw up to 100 mm, allowing it to be adapted to different material thicknesses. Disc inclination: The cutting disc can be tilted from 90° to 45° Solid guideways: The machine has solid guideways with scales, both longitudinal (steel) and angular Additional format table: the large bearing-mounted format table with support is one of the main advantages of this saw. This makes it possible to process large format boards and materials with a large surface area. Sawdust discharge system: The woodworking machine is equipped with a sawdust discharge pipe system, which helps keep the work area clean. Easy disc change: The replacement process is quick and efficient, allowing you to work efficiently. Side guide with graduation: fitted with a side guide with accurate graduation, which facilitates serial cuts of the same length. Lrjdpfx Apsvuf Tmo Dsn Saw blade guard: the saw has a saw blade guard that can additionally be connected to the extraction system, which guarantees safety and cleanliness in the working area. Technical data: Length of the format table [mm] 2000 Cutting width right side [mm] 1260 Swing of saw blade [°] 45 Cutting height at 45° [mm] 80 Cutting height when using circular saw blade 315 90° [mm] 100 Cutting height with saw blade set to 300 90° [mm] 95 Maximum dimension of saw blade [mm] 315 x 30 Maximum dimension of undercut [mm] 100 x 20 RPM of main saw [U/min] 4500 Bowl speed [U/min] 5800 Motor power S1/S6 3.8 kW / 6.1 hp Power supply 3 phases, 400 V Weight [kg] 275 Warranty [months] 12

Condition: good (used), Year of construction: 1999, functionality: fully functional, power: 3.6 kW (4.89 HP), Sanding belt width 150 mm, sanding belt length 2000 mm, table manually tiltable Lodpoy D Du Hefx Ap Dorn

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, X-axis working area: approx. 3000 mm Y-axis working area: approx. 1550 mm Z-axis working area: approx. 150 mm Lrjdpfx Apoyzkm Ds Dsn 4-axis electrospindle Vertical drilling heads: 22 Horizontal drilling heads X: 4 Horizontal drilling heads Y: 4 Integrated saw unit in X and Y directions Linear tool changer with 12 positions on the left side of the machine frame Tool changer with approx. 18 positions Tool position for circular saw blade, mounted on the gantry. Maximum blade diameter: 350 mm. 2 Becker Picchio 2200 vacuum pumps, each with 90 m3/h Chip conveyor belt Safety mats

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 85 mm, cutting width (max.): 1,200 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: electric, rotational speed (max.): 6,000 rpm, overall weight: 600 kg, Equipment: CE marking, documentation/manual, saw blade guard, Model: MJ45Y 2000 Brand: PERFECT, POLAND – CE certificate – Operating manual in Polish – Spare parts available now and in the future TECHNICAL SPECIFICATIONS: – Cutting length: 2000 mm – Cutting width: 1200 mm – Cutting height at 90°: 85 mm – Tilting saw blade: 0° - 45° – Max. main saw blade diameter: 315 mm – Max. scoring blade diameter: 125 mm – Main motor power: 4 kW – Scoring motor power: 0.75 kW – Main saw rotational speed: 4000 / 6000 rpm – Scoring saw rotational speed: 8000 rpm – Carriage guided on steel rods – Two separate motors – S1 motor – suitable for continuous operation – Outrigger-mounted guard – required by H&S regulations – Centralized lubrication – Parallel fence with fine adjustment – Extendable fence up to 2300 mm – Two hinge stops / catches – Aluminum sliding table, width: 370 mm – Sliding table with stepless locking – Electronic saw angle indicator – Tiltable upper extraction hood – Fence / protractor for angled cuts – Extraction ports: Ø 100 mm, Ø 80 mm – Table dimensions: 1850 x 1700 mm – Table height: 880 mm – Table extension: 660 x 765 mm DIMENSIONS WHEN ASSEMBLED: – Length: 2800 mm – Width: 2000 mm – Height: 1340 mm – Weight: 620 kg PACKAGING DIMENSIONS: – Length: 2070 mm Ljdpfxoyuf Eye Ap Dorn – Width: 1100 mm – Height: 1250 mm – Weight: 620 kg

Condition: new, Year of construction: 2026, A sliding table saw for working with high density boards, MDF boards, ABS and PVC panels, solid wood and other wood-based materials of similar structure and hardness. The saw is designed for small and medium carpentry work. Machine description Strong, solid and compact design ensures convenient and and failure-free operation Sliding table saw mounted on a spindle tilting in relation to the worktable capability Steel, welded body with a permanent cast iron table and a movable table made of strengthened aluminium – the table of this machine is very durable and does not deform Technical parameters CUTTING LENGHT 1600 mm Lsdpfxstz Srlj Ap Dorn CUTTING WIDTH 1200 mm SAW TILT 0-45° CUTTING HEIGHT AT 90° 80 mm CUTTING HEIGHT AT 45° 56 mm MAX. SAW SIZE 315 mm MAX. SCORING SIZE 120 mm MAIN SAW SPEED 4000/6000 obr/min SCORING SPEED 8000 obr/min MOTOR POWER OF CONTINUOUS WORK S1 5,5 kW SCORING MOTOR POWER (CONTINUOUS WORK S1) 0,75 kW WEIGHT 460 kg